Satellite M60-162: vertical and transparent stripe on the screen

Hello

Satellite M60-162 appeared a transparent white vertical stripe on the screen of my laptop. The band is present at startup in the BIOS and in normal operation of the computer. How can I fix?

No doubt with the replacement of the screen.

A few years ago I had old Satellite M70 and it had a horizontal white line on the top of the screen. The line was also visible all the time, in the BIOS, when the home Toshiba screen showed and using OS.
I replaced the LCD screen and everything was OK again.

Tags: Toshiba

Similar Questions

  • Satellite P750 - grey and black stripes on the screen

    Hello

    I BOUGHT MY NEW TOSHIBA (3D) AROUND A MONTH AGO P750
    AT TIMES RANDOM SCREEN WILL BE BANDS GREY AND BLACK HORIZONTAL AND VERTICAL
    IT IS GETTING WORSE FROM WHEN HE STARTED
    ALSO WHEN PUT ON THE TOSHIBA START LOGO ON SCREEN BEGINS TO BLINK
    SOMETIMES PASS THE SCREEN WIL HELP.
    NOT VERY HAPPY AS ITS NEW BRAND.
    COMPUTER LAPTOP MOVES FOR EXAMPLE HIS USE NORMAL OF A HOME WORK.

    ANY IDEA WAT I HAVE TO DO?

    In my opinion not only make sense for you is to contact your local dealer where you bought your laptop or a provider of services of Toshiba directly.

    You have for laptop with a valid warranty and if something like this happens, it must be fixed, or you should get the new laptop.
    Call the service, ask for help and I'm pretty sure that they will help you with that.
    Do you know how to find Toshiba service in your country?

  • Satellite P100-115 - vertical lines to appear on the screen

    Hello.

    My Satellite P100-115 is 2.5 years but yesterday a thin vertical line appeared on the screen.
    I already checked this problem by connecting an external monitor.

    The line does not appear on the external display.
    Could you tell me what might get hurt? I always took care of the laptop so he couldn't be a race of misuse.

    Concerning
    Lukas

    Hello, Lukas

    You did the right thing and tested it with the external monitor. There is evidence that the display is faulty and must be replaced. It has nothing with the help of the ADB. Such a thing just happens.

    Sorry, buddy, but there are two solutions, either Exchange the screen or use it with external monitor. :(

  • Satellite L650-14F - lines and streaks appear on the screen

    I have a toshiba Satellite L650-14F PSK1LE, bought from a reseller of Romania last week and I have big problems with the video, I guess.
    The scree Somethime closes and appears a few scratches on the screen and I can't use any command.
    The blocking of the laptop. The only thing I can do is to close the laptop and re-open.
    The display driver is installed. What is the problem?

    PS: Sorry for my language and we hope you understand

    Hello

    There are some common steps that should be made on the one hand;
    -test new graphics driver
    -updated the BIOS to the latest version
    -recover the laptop to factory settings

    If the lines are still visible, you must connect an external display.
    If the lines would be visible also on the external monitor, the graphics card can be affected.

    In this case, the part needs to be replaced.
    But this is a job for a technician in ASP.

  • Satellite P10: clouds white and purple fading across the screen during startup

    I had problems with my laptop PC-10 so I bought a new hard drive (Fujitsu 60 GB instead of 40 GB) standard and have it myself. I was working very well with it for a long time, until suddenly I have had the strangest problem that I've ever seen on a computer...

    Sometimes, when you start the laptop, instead of the screen normal red "TOSHIBA" and the message to start Windows XP, the laptop displays simply little weird white and purple clouds fading across the screen, fading finally on a screen very dark, but not quite black.

    I thought first it was a problem with the DVD player, like when he finally gave and started normally, the DVD drive has been disabled. However, I noticed in the BIOS, under "Advanced" the Infrared Port shows intermittently - it shows with the [Disabled] setting next to him, but will be then disappear from the list, then reappear again and then go again and so on.

    Sometimes my computer will function normally, then completely shut (mouse and all) and will restart with the clouds!

    I looked in the Windows Event Viewer for when the laptop has locked up and have seen anything to do with a problem with IRQS for the Infrared Port. I disabled the infrared port in Device Manager (I managed to activate in the BIOS by loading the standard BIOS settings) and rebooted, but it started upward with the clouds once again, so I have the feeling that the infrared port is the culprit - loose connection may be defective material because it is located close to the DVD player and HD player.

    I was wondering if anyone has seen something like this before on any computer, and if they knew how to solve? It seems completely illogical that a defective IR port could change what is displayed on the screen on startup, unless of course there is something wrong with my HD boot sector?

    Any ideas?

    Thank you.

    Tom

    Hello

    I've never seen like this problem before and I don't think that this issue has something to do with the HARD drive or the IrDA port.
    As much as I know the IrDA port is not available on Satellite P10 - xxx

    For me, this looks like a faulty screen or graphics card.
    Have you tried to connect the external display? If this isn't the case, then try to do and check if it also appears on the external display.

    I recommend also to recover the laptop with Toshiba Recovery CD and then check the functionality.
    But if the malfunction appears so I would recommend contacting the Toshiba ASP for control from laptop

  • Pink and blue stripes then the screen freezes

    The screen will get pink and blue on stripes and then it freezes and must be turned off manually or a battery pull.

    Hello

    You are facing problems with pink and blue stripes and the freezing of the screen.

    -When exactly are you facing this problem?

    -Do you have the question started recently?

    -What is the brand and model of the computer?

    -What operating system is installed on your computer?

    -Did you do changes on the computer before this problem?

    Method 1: I suggest you follow the steps to run the troubleshooter of material from the link and if it helps.

    Open the hardware and devices Troubleshooter

    http://Windows.Microsoft.com/en-za/Windows7/open-the-hardware-and-devices-Troubleshooter

    Method 2: I also you suggest trying to update display drivers and video card drivers, then check if the problem persists.

    Updated a hardware driver that is not working properly

    http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

    HOEP that helps.

  • Pixelated, yellow and red stripes on the screen

    So here's the deal.

    When I drag a clip in a timeline, it seems fine.

    When I play the video seems normal, like this.

    Screen Shot 2015-10-23 at 7.56.03 PM.png

    But when I stop (pause) the video, the screen turns to this:

    Screen Shot 2015-10-23 at 7.56.09 PM.png

    It's exactly the same when I export the video.

    Screen Shot 2015-10-23 at 8.00.07 PM.png

    The only way that I'm NOT to look like it is when I change the zoom to 100% level

    Screen Shot 2015-10-23 at 7.54.49 PM.png

    But it still all wobbly still exports.

    I edited a bunch of different projects with a bunch of codecs in the past. This problem just started magically appearing recently.

    This problem happened with three different file formats and settings of sequence is not only these images.

    Any help would be appreciated!

    Here are a few screenshots more of my setup.

    Screen Shot 2015-10-23 at 7.58.10 PM.pngScreen Shot 2015-10-23 at 7.58.53 PM.png

    (yawn)

    If you had searched or read through the forum here at all, there has only been what, a hundred or more of the same? in the last two weeks. If it seems to you that this could well be the same period of time as more recent trash-OS of Mac, El Capitan, was released... gee... you wouldn't be fair!

    So complain to Apple, since this OS hit other programs and companies too.

    Then... Project settings... Mercury Playback... to choose only the software (stop down your graphics card, sorry...)

    Select Remove previews in the box below...

    And seek to El Capitan questions here. And make sure you are on the last patch of OS...

    Neil

  • Satellite M60-162: problem gambling (game)

    Hello
    I bought a Satellite M60-162 to use for work and a bit of entertainment (including games).
    It happens that all types of game, I installed (Medal of honor, C & C Generals, Nba live 2005, MS Flight simulator 2004) breaks down when it is run (just click on 'play' and after a while, the game crashes). The installation program ends normally, but every game crashes.
    The only game that works is 'The elder scrolls III - Morrowind '.
    I have updated with patches - if available - all games without any profit.
    I also updated the graphics (Ati mobility radeon 700) driver and installed the DirectX 9 .0c. Nothing has changed.
    Finally, I ran a test for the graphics system (3D Mark 360) to check if there were hardware problems. All tests have passed.
    I don't know what I could do to remedy this situation.
    Thanks a lot for your help.

    Hello

    Believe me it's not easy to say why it happens.
    It could be a driver problem or a software problem (game). The only way to know why it happens is to test the device with different settings. Try using a lower screen resolution during the games. Try to change the game settings.

    Windows XP performance settings that affect the visual appearance of the operating system, most of the games have buried in their menus of Options graphic settings. The trick is to find them.

    I found a very useful and interesting article how to optimize the parameters of play for performance and looks. Please click the link:
    http://www.Microsoft.com/windowsxp/using/games/learnmore/optimize.mspx

    Maybe these tips will help you

  • Satellite M60-162 cooling fan

    Dear users of Toshiba,
    is it normal that my Satellite M60-162 new cooling fan is often turned on and off with the normal energy profile selected in the toolbar State Windows XP?
    Sometimes I want to turn off my Satellite only because I'm confused on the noise generated by the cooling fan!

    Kind regards.

    Hi Fabrice,.

    Yes, it is quite normal that your fan to kick in all few minutes (my A30 will systematically even if only displays the desktop).

    Toshiba power settings usually have a 'silent' option which helps to reduce the volume of fan activities (by slowing down the speed of the CPU) that can help, but it is still likely that the fan lights from time to time.

    Excessive activity and the fan noise is a common problem that is often discussed in this forum and is probably the result of trying to put as much of hardware and software in such a small case.

    Kind regards

  • Microphone internal satellite M60-162?

    Dear users of Toshiba,
    can someone tell me how to turn on the internal microphone on laptop Satellite M60-162, if any?
    Thanks in advance.

    Kind regards.

    Hello

    Not according to the specifications of your device, there is no internal microphone. I'm sorry.

  • Using an IP191 monitor, have random horizontal stripes on the screen - have no problems with other browsers. also no problem with FF on the other PCs on the family

    Using an IP191 monitor, have random horizontal stripes on the screen - have no problems with other browsers. also no problem with FF on the other PCs on the family.

    These "streaks" seem to be the domain of the high frequency analysis; they can be eliminated by scrolling upwards or downwards.

    Hello, maybe it's a problem with hardware acceleration - try updating your graphic driver, or in case this does not solve the problem, or there is no new version available at the time, disable hardware acceleration in the firefox menu

    > options > advanced > General.

  • I wish I could make a website I use ofter and drop it on the screen of firefox under url. Then, I'll have rapid access. How can I do this?

    Question
    I wish I could make a website I use ofter and drop it on the screen of firefox under url. Then, I'll have rapid access. How can I do this? I currently use it on my laptop, but recently bought a new computer and downloaded firefox and lost a lot of features that I enjoyed.

    It was exactly what I was looking for - thanks a lot!

  • On my iMac OSX El Capitan v 10.11.3 when editing of photos and work between them the screen takes over and moves the picture on the next picture before Ive had the chance to edit, I then fold the photo required to try again. This can hap

    On my iMac OSX El Capitan v 10.11.3 when editing of photos and work between them the screen takes over and moves the picture on the next picture before Ive had the chance to edit, I then fold the photo required to try again. This can happen several times and its so frustrating.

    Similar thing TI also occurs when you are working on other programs on the mac, but not nearly as much.

    Guessing here, but try to disable drag between pages on the tab more than movements in the system preferences > mouse. or a Trackpad. Depending on whether you are using.

  • I have a very serious problem. My iPhone 6s fell and has cracks on the screen. What should I do now?

    I have a very serious problem. My iPhone 6s fell and has cracks on the screen. What should I do now?

    Warranty Apple does NOT cover accidental damage.

  • I have an acer laptop and need to brighten the screen... How?

    I have a laptop acer and need to brighten the screen > HOW?

    There are two options:

    • It seems that you are using Windows XP. Right-click on your desktop, click Properties, and then select the settings tab and click Advanced. There should be a tab named after that card manufacturer (Nvidia, ATI, etc.). This tab should have a button that opens a panel of controls specific to the manufacturer, which allows you to make adjustments to the video card, including the color/brightness.
    • Laptops usually have a touch of "function" (Fn), you can stick it together with other keys to adjust some of the properties of your laptop. These other keys are the regular with symbols keyboard or keys drawings next to them, usually in a different color. Looking for a symbol that resembles the brightness, like a Sun. When you find it, press and hold down the Fn key, then click on in the special key that you just found.

Maybe you are looking for

  • myRIO i2c problem

    Hi I have just started using the myRIO. I use the I2C to connect a remote device (motor controller). I figured out how to send data (speed), but Im having problems reading certain values with the I2C of myRIO function. I want to read the register to

  • Broadband by wifi interference

    WiFi BT CONTINUES to TRY TO TAKE MORE of MY LAPTOP any WHO ADVISED HOW STOP THIS, BECAUSE IT ME DISCONNECTED FROM MY HOMEHUB AND I need TO CINTINUALL LOG BACK IN!

  • There is a bar on the left side of my screen that has menus labeled "file Taks', 'Other locations' and 'Details' drop-down. How can I get rid of him?

    Original title: appearance of office. There is a bar on the left side of my screen that has menus labeled "file Taks', 'Other locations' and 'Details' drop-down.  How can I get rid of him?

  • Messed up display

    Hey all, I read most of the threads on this problem regarding the screen goes white/white and does not properly and tried formatting, resetting factory, manual installation of the firmware, etc.. Nothing worked! I always get a garbled screen and when

  • PushRequest 401 response code

    Hello We have several apps using push service. In our server, all of them work fine but only returns the following error message. We also use the following base URL: https://pushapi.Eval.BlackBerry.com/MSS/PD_pushRequest