Satellite M70 does not start without AC - 85% battery

Similar Questions

• I deleted the boot camp trying to resize the hard drive on my mac pro book. now, the computer does not start without a bootable device, which I don't have, and any download must be on a windows machine. Can anyone help

  I deleted the boot camp trying to resize the hard drive on my mac pro book. now, the computer does not start without a bootable device, which I don't have, and any download must be on a windows machine. Can anyone help

  1. did you remove Bootcamp using disk utility?

  2 have you tried local restore or recovery of the Internet? - OS X: on OS X Recovery - Apple Support . Mac with built-in optical drives may need 'Gray' disks to boot the system.

• Satellite A110 - does not start

  Satellite A110 does not start on power, but the HD load no start fan display running, but in a few seconds it stops.

  Help, please

  Hi jinskywalker,

  No display?
  No beeping?
  Nothing?

  In this case, you should read this article:
  [What steps must be followed if your Toshiba laptop does not start? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=21]

• Satellite C650 does not start with android phone on

  Hello

  I have a smallproblem. My Satellite C650 does not start when my android phone is plugged into the USB port. It sticks to the Toshiba start screen. I checked the boot order and the hard drive is the first on the list, so it isn't that. Any advice will be welcome.

  Thank you very much
  Ian

  Cool. Thanks for the comments.

• Satellite P300 does not start immediately

  Hello

  My Satellite P300 does not start immediately. I have to press the button start ca. 20 or 30 times.

  No results?

  Hello

  I have the Satellite Pro P300 in front of me. I use it almost 4 weeks now and I press the Start button, very gently and keep it down to the second or two and laptop starts fine everytime I want to start it.

  Do not press the button quickly several times but slowly and keep it down for a second or two.

• XP Home Edition does not start without the installation CD after reinstall.

  I reinstalled XP Home Edition on my PC without formatting the drive first in order to keep all of my data.  I have installed all service packs.  However, for some reason, I had to call Microsoft to get validated.  The only problem I have now is that it does not start without the installation CD in the drive.  I have XP on the half before the C drive and me on the back of half.  The reader is a digital WD800JBRTL of Western.  Well it worked like that for years. Why can I now not start without the CD?

  HiNeal2660,

  It seems that the NTLDR file is not on the C: drive. NTLDR is the boot loader for all versions of Windows.

  You can perform a Windows XP repair installation & check if you are able to start normally.

  For more information, please visit this link: perform a repair Installation

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite M50 does not start, go back to the screen with different start modes

  My Satellite M50-130 does not start correctly. When you turn it on, it goes to a black DOS screen, saying: "We apologize for the inconvenience, but Windows did not start successfully. A recent hardware or software change might have caused this. "It offers me different start modes: Safe Mode, with networking and command prompt. Last good Configuration known; and start Windows normally.

  I tried all the 5 options, gets the commissioning insofar as the Toshiba screen, but then with all the options, it returns to the initial screen offering the 5 modes of starting. Same thing happens when laptop works again.

  The only recent software change, I've done was an update to Norton AntiVirus/Internet Security and I suspect that Norton is at least part of my problem, see history below. I know it's the Toshiba support site, but I tried Norton so many times without success, I gave up. Plus, I'm no expert at all, so I can't be sure that it is really the source of all my sorrows. All advice welcome!

  The performance of my laptop has deteriorated seriously in the last two months. She is extremely slow, and cleaning of malware and unwanted General does not help. It began right after that I renewed the license of Norton last year and upgraded to the 2007 version. The worst downturns are always connected to direct upcoming Norton upgrade programs. I disabled the live upgrade, but programs always come to the top, and I can't stop them, a popup tells me that they are protected.

  Wireless internet is also very capricious, even if another computer on the same network works fine.
  During the last week, I had to relax a little internet security settings (from "moderate to severe" to "low to medium") because after an other update of Norton AntiVirus, I couldn't access to interactive Web sites.
  It is perhaps a coincidence because Norton AntiVirus comes with updates at least twice a week - but what else could be the problem?

  My apologies for the long rant, I am grateful for all the advice!
  Thank you
  I have.

  Hello

  I think the only way to make your system works correctly again is to restore with the cdrom of onboard catering. Simply manage to save your data from your hard drive (the best way would be to put your machine's HARD drive in a USB - HDD enclosure and copy important data on another computer), then wipe the system completely off you hdd.

  After that, the system must run again...

  Welcome them

• Satellite A30 does not start with the USB device connected at boot time

  Hello

  I have a Satellite A30 and sometimes it does not start.
  After turning on, not even the BIOS starts.
  even if sometimes the BIOS starts, but the OS does not load.

  I figured out that its related to USB devices connected at boot time.
  If no USB devices are connected, it starts without a problem.
  Even if the start-up is suspended, as soon as you unplug start it BIOS USB devices.
  Its ok to connect USB devices later, once the system has started.
  I disabled "removable devices boot" and "network startup."
  just in case, but it makes no difference.

  BIOS is version the most recent (1.70) and it comes up with all kinds of USB devices.
  printer, mouse and (self-powered) external USB hard disk.

  Is this a known issue?
  There is no known workaround solution?

  Hello

  I put t know why this happens, but it has to do with the BIOS.
  The same thing happened on my old laptop. I couldn't start my unit while the USB printer has been turned on and connected.
  The only solution is to disconnect the external USB device during the boot process.

  RSY you should check if the order of boot in the BIOS has been on the HARD drive first.

• Satellite C660 does not start on disc or USB

  My Toshiba Satellite C660-DSC0QE app, BIOS version 1.80, will not start Windows more - it just goes to the dreaded black screen with white cursor.

  I tried a system Win 7 recovery disk, a USB with software from Kaspersky on her recovery and even a full Win 7 installation disc, and it does not start at one of them.

  The boot order is set correctly, (optical drive or USB port) devices are read, but their initialization never actually in them - there is an obscure error message, or it acts like they weren't there at all.

  The obvious answer to these forums seems to be disable secure boot mode and then switch the to the CSM UEFI boot mode. Easier said than done - the menu options don't exist at all in my BIOS/CMOS screens.

  Finally, I see no way in the instructions to get a BIOS update occur without being already in Windows on the PC - http://aps2.toshiba-tro.de/kb0/HTD9502M10000R01.htm I'm assuming that the BIOS version 2.00 would have these options.

  Any help gratefully accepted!

  Hello

  I assumed that you have a white blinking cursor in the upper left corner.
  Is this correct?

  These symptoms appear where the system can not find a boot device (HARD drive) or memory problems (RAM module).

  First of all, you said that you have UEFI / CSM boot mode in the BIOS settings.
  So I m asking you what parameters of start mode appear in BIOS exactly?
  Find you these settings in the right area?
  Usually, you should have an area (tab) called security in the BIOS.
  In most cases, you will find a safe boot option, but the Satellite C660 does not support this option because it s too old.
  But the startup mode (UEFI /CSM) should be available in the BIOS. Check the settings in the BIOS of the system area

  Anyway, as I said above; It could also be a memory problem, so I recommend you to check if the memory is OK.

• Satellite P20 does not start - BIOS are not displayed

  I have a Satellite P20 and recently it does not start. When I press the power button that disk HARD will light up and it will check the cd-rom drive, but the screen is blank and will not display the bios screen. I can only turn it off by pressing the power button.

  Is it likely to be a hardware problem? I'll try to remove the RTC battery if possible to see if this resets the bios.

  Thank you

  Hello

  Maybe you have a problem with your battery from the Machine.
  Please make a new start without the battery.

  Go that wasn't you maybe has a possibility with a display of extern.

  I hope this is a help.

  By

• Satellite 2450 does not start - only in safe mode

  Hello

  I'm having a problem with my Satellite 2450 where it is not initialize properly - is stuck in the screen of Windows XP (just continues to scroll through and hangs there).
  I can boot into safe mode.
  Have not had any other problems with it - no errors, do not have installed/uninstalled anything recently.

  Any ideas what could cause this problem?
  Do you think I should use the recovery disk to reinstall the OS? Anything less drastic I can try?

  any advice appreciated,
  Thanks in advance.

  Hello

  Usually, if the laptop does not start correctly in normal mode, but only in SafeMode because some drivers or / and software applications are false or defective.
  In this case, the recovery procedure should solve this problem.
  If you n t have the Toshiba Recovery CD, you can install from the original CD of Microsoft's operating system, and then you can try to install stuff together from Toshiba (driver, tools)
  These software, you will find on the page of the Toshiba driver.

• Satellite C650 does not start - error PXE - M0F

  Just bought a Satellite C650, get it home and my son decided to stop the whole upward as he ran.

  Now, we get the error below:

  Check the connection of the cable!
  PXE - M0F: Exit Intel PXE ROM
  No boot device - insert boot disk and press any key.

  We received no drives, nor a manual with adequate instructions and can't find anything on the web for help.
  Toshiba closes for the day.

  Hoping that this forum could give me an idea.

  Hello

  PXE error is displayed because the laptop has attempted to boot from LAN.
  Why it does not start from the HARD drive but LAN switches?
  I think the HARD drive is defect.
  Perhaps its also not recognized in BIOS.

  Switch on and press F2. This allows you to access the BIOS where you could check if the HARD drive is recognized. I guess it must be mentioned on the first page.
  If it s not there, then it means that the HARD drive is dead and must be replaced.

  I assume that the warranty is still valid; Therefore, you should get in touch with Toshiba ASP in your country for replacement.

• Satellite M30: Does not start XP

  My Tosh Satellite M30 laptop (with 2 HD discs) does not work after I have updated with the MS security updates, it does not start XP.

  The laptop makes a clicking sound and gives me the message:

  PXE - E61: Media test failure, check cable of
  PXE - M0F: Exit PXE ROM
  Operating system not found.

  I changed the boot order in the BIOS to: CDROM. And select Exit and save changes.
  Inserted my Toshiba Recovery windows XP version that allows me the option of
  "1. the recovery disc" or "2. Expert recovery mode"or also"Exit ".
  I chose "1. Recovery disc"as I'm not an expert (as you can tell!)

  I then get a load of diagnostic checks run by laptop and it shows then finally on the screen:
  X:\\ no disk fixed

  Ideally, I would like to repair and keep things I have on my drive D: HD.

  I'm pretty sure the XP starts on my drive C: HD.

  Your help is very appreciated!

  Suraj

  Hello

  The PXE message means that the device is trying to boot from the network. I put t understand you a lot with C and D HD. I assume you mean that you have two partitions on a single HARD disk. C partition for the operating system and the D partition for your data.

  If I understood you as soon as you cannot boot operating system at all. On this path, it is not easy to say what may be the problem but obviously you a problem with the HARD drive. It is probably defective. If the recovery DVDs is not able to detect one that there may be a serious problem.

  I put t know how contact the partner old Service your unit is but if the warranty is still valid and let check the device.

  Good luck!

• Satellite L850 does not start

  Hi, I have problems with my L850-150

  The thing is that it does not start. Power led turns, Nums Lock led turns, fan comes on and does nothing more, so it is not a power supply problem.

  I read in this forum that the bios update could solve the problem, but as I saw it in the instructions, it seems that the update must be done on the Windows environment, and as I said, the computer does not start, so I can not do the update of the BIOS.

  Is there another solution? Is there another way to update the BIOS?

  Thanks in advance.

  Can you please tell us more on your laptop and all you did the last days?
  You use the original OS to factory settings?
  Did you do anything that may be responsible for this (hardware or software update/upgrade)

  It is hard to believe that something like this happens for a moment to the other without any reason.
  You're right, it has nothing to with the power supply, there is something else, but on this virtual path, it is not easy to provide an accurate diagnosis.

  In the worst cases, contact the nearest Toshiba or your local dealer services provider and ask for help.

• Satellite A350 does not start

  I have a Toshiba Satellite A350 (about a year and a half) who does not start correctly. This has happened after that the laptop was left on until the battery has failed. The button of the keyboard and the power LED lights up, but the screen stays black when I try to turn it on. I use Windows Vista.

  The machine continues usually to make a sound whirring for a few seconds before it stops making noise (the fan and the HD). The screen flickers sometimes a lighter black on a screen for less than a second. In addition, the cooling fan has sometimes continued to operate after you stop all the rest.

  Another problem is that when if it is turn on and go to the Toshiba screen, odd lines will fade to the screen, and finally the screen eventually white/blue. On the other hand, sometimes it turn on and act as if nothing had happened. In these times, placing sleep mode will be to not be a wheat to turn back on.

  I tried removing the battery, using only the battery, fully charge the battery and using the laptop with barely any load from the battery and it doesn't change anything.

  I would really appreciate any kind of lead as to what may be wrong with the poor.

  Hello

  Generally speaking, it is always difficult to say something on these sometimes mistakes because it s not clear and can be caused by all parties, but at the moment I doubt that this problem is software partner

  You see something on a screen when the internal screen stays black?

  In the worst case, it s that a hardware malfunction and that would mean you need help from an ASP to check what part is affected, but if your laptop is under warranty, the repair is free.