Satellite M70 - LCD display is completely dead

Similar Questions

• Satellite M70-340: screen went completely blue or black

  Hello world
  I just bougth a portable Satellite M70-340 and twice tonight screen entered a single color (black once, once blue) and although I could still hear the windows work (I could hear the Windows alert sounds and alerts by MSN mail), the screen went completely blue or black. I assume that the error is caused by a problem of display driver, so I downloaded the latest driver present Intel on this site. I don't know if it will work.

  My question is, did this happen to someone of you? How did you solve this problem? And even though I have an Intel Graphics Media Accelerator Driver for Mobile, I could install the ATI driver on this site? (I prefer ATI driver since it is out of date.)

  Thank you all for your interest,
  Best regards.

  I guess you have mobile Intel graphics card. In this case, you can only use the graphic driver intel from the Toshiba page or are also website of intel.

  But you cannot use the ATI graphics driver! You laptop has ATI No. graphics card!

  However, you suggested that it is a new laptop. I would recommend to contact Toshiba service partner in your country. The guarantee is valid and you should take it!

• Satellite L50 - B - 14 M completely dead - no power not on

  Hi all

  I am now the proud owner of a Toshiba Satellite L50 B 14 M, since a few days it serves not on at all. When it is pressed the button at the top right (even for al longer) nothing happens, not even a little noise or a flash of light. He remains completely dead and will not turn on at all. Haven't tried with adapter connected / not connected / without battery still no change. The laptop was not abandoned or in a hurry or anything strange I just pressed the power button to continue working on it.

  Tips / advice is much appreciated! Best regards, Jan

  Hello

  It's really not easy to say what may be wrong with that. Unplug the AC adapter / CC, remove the battery and press the power button for about 20 seconds. After doing this leave for a while and connect the power supply only.

  DC in / battery indicator lit?
  What happens when you press the button walk / stop? Is there a reaction?

• Satellite Pro A120 is now completely dead

  I have a Pro A120, which has not been used for a few months, but is now completely dead.
  There are no lights on it at all. I bought a new power adapter, but still nothing.
  Can anyone suggest anything to check/replace or did it. It worked fine the last time I used it.

  Hello

  Remove the battery and unplug the AC adapter.
  Wait 1 hour or more and then reconnect the two parts.
  Then try again to power the unit.

  If that does not help, check out the RAM modules.
  Remove a module and test the device with a RAM module.

  If that does not help, then you should get in touch with a local computer technician laptop because he feels as a serious problem of material

• Satellite M70-193: how to complete drivers download list?

  Hi, I am looking to clean install XP Pro. On my m70-193 (fact), but I got stuck in some of the necessary drivers to complete the installation. I downloaded all the drivers from toshiba for my machine (pilot 65) but I can't fined the rest of them (almost 25 driver) could you please advice?

  Thanks in advance

  Musa

  Can you please tell us the State of the Device Manager? Is there some uninstalled components. On the Toshiba download page, you will find many miracles. You tell them when you mentioned 25 missing drivers or what?

  Install SP2 and check the option to update Microsoft online. Any shortfall will be downloaded and installed automatically. It is important to install all the drivers correctly.

• Satellite M70-340: display driver has stopped working

  HI, I BOUGHT ALL NEW LAPTOP FROM DUBAI THE MONTH LAST. HIS GIVING DISPLAY PROBLEM BEGAN THE IALMRNT5 DISPLAY DRIVER HAS STOPPED WORKING NORMALLY. MUST RESTART TO COMPLETE SYSTEM RESTORE"

  I DID ALSO DRIVE FORMATTED, REINSTALLED PREDRIVERS. BUT IN VAIN.

  ADAPTER IS INTEL! ATI DOES NOT INSTALL!
  DON'T KNOW HOW TO TO THIS TOPIC AND NOW IT JUST BEDS ONLY BLUE POWER LIGHT AND CRASHES ON STARTUP WITH SCREEN WHITE!

  PLEASE SUGGEST...
  CONTACT on [email protected]

  Hello

  If the reinstallation of the system with the recovery CD does not help, then it is not a software problem.
  This means that some hardware component is defective.
  In this case, you need to take your laptop to the service.

  Good bye

• Satellite M70-131: display turns to a sometimes white or green color

  Hello, I hope someone could be of any help to me.

  I noticed lately that while iam working on my laptop suddenly the display screen turns a color to the sometimes white or green other times a color... and I can't go out this State unless I restart from the main switch and then everything is back to normal...
  but it happened recently with me more than 5 times now... can someone tell me what it could be please?

  allure

  The same question appears on the external monitor?
  Have you tested this?

  If this isn't the case, it would be interesting to know if the same color issue goes on the second external monitor.
  Which helps to clarify if it is a problem of graphics or the internal display (or FL inverter) dysfunction.

  If everything is displayed properly on the external screen then there must be something wrong with the screen of laptop computers or as mentioned above with the inverter FL.
  In both cases, the parts must be replaced!

  But note; internal screen or the replacement of the motherboard is not cheap! The two pieces are more expensive pieces are integrated into the notebook.

• Blue Screen of Death and no XP CD - Satellite M70

  Hello.

  I have a Toshiba Satellite M70 that displays the blue screen of death at startup. It reads an error 0x000000ED reporting an error unmountable as the specific problem.

  Unfortunately, I have no CD of Windows XP to restore my computer. I have the Toshiba product recovery CD, but that seems like it will just format my computer, and I have important data, I want to absolutely not delete from my hard drive.

  I can't start in safe mode; Blue screen of death appears immediately at startup. If I try to pass int F8, advanced options, but after you have selected the system restore, it goes back to BSOD. I also tried to burn an ISO to the recovery file and the computer entered the Windows installation, but hangs on "Setup starts Windows.

  Any idea what the problem might be? And how can I solve this problem without deleting any info on my computer?

  THX.

  Hello

  The HARD drive can be removed very easily. It s placed at the bottom of the unit and you have to delete only one screw to remove the plastic cover that holds the HARD drive Bay.

  I think it's a better solution than you could connect to another computer via the external USB HDD controller.

  If you want to use a Toshiba Recovery CD then you must choose the advanced option which would allows you to choose the partition where the operating system would be installed.
  And this partition will be formatted

  So in this case you would also lose some files from the HARD drive

  I'm not sure about BartPE just google for more details

• Satellite M40-265 LCD displays the image complete but crushed

  Satellite M40-265 LCD displays the image complete but crushed on two-thirds of the screen

  When my Satellite M40 - 265 ATIMobility Radeon X 700 and omega 3.8442, Windows Xp drivers, Sp3 boots by setting the LCD + analog RGB, initially only displays on the external screen after startup can be switched with Fn + F5 on LCD. Then appears on the LCD, the complete picture but only two thirds of the screen, third, the right is black. It works so well when the external monitor is not connected during the boot.

  When defini set to auto, select the display to the computer starts only when an external monitor is connected, then after that, I spent in the LCD screen.
  Damage to the inverter is excluded as already checked. Inspect visually the cable of the LCD displays nothing. Beside the left speaker, a ground wire (black) to screwed, but it is s t connected anywhere.

  Starting in safe mode is possible to use a display fullscreen on external

  Hello

  The M40 is a not sure oldie about the available settings in the BIOS and in the graphics options, but I think you should check the settings of the graphics card ATI Catalyst.
  I remember that ATI catalyst supports certain options such as resizing the Image. Here you can select the image scale Panel option full size
  In addition, you must set the resolution on the internal screen at native resolution of 1280 x 800
  I think that the external monitor supports the resolution, which is not the same thing as the screen internal.

• Satellite M70 354: how to change the display?

  Hello!
  My TFT-Display of my Satellite M70 354 is physically broken. So I need a new. The Servicepartner costs of a new view without working time are EUR 450,-(!). It's too.

  Is a change to myself as possible, or is it very difficult? On Ebay, I found a screen, compatible with an M70... What is important in changing the display?

  Maybe you can help me.
  Thank you!

  You should know that the display is one of the parties outside the laptop computer motherboard expensive.
  The costs are huge, as you can see. Of course the 450 bugs is too but it is a new LCD and additional, you will pay for the technician.

  That is why it s a good idea to look for second hand unit. The replacement of the screen is a little tricky. You must remove the plastic frame that attaches around the screen.
  The display is usually fixed with 6 screws and connected to the Board of Directors and FL inverter.

  I think that you should not replace yourself. I see that you have no much experience on these replacements. So the best idea is to buy a second hand laptop but then to ask a technician for replacement.

• Satellite M70 - CLI - cannot install display or SM Bus controller driver

  Hello

  I have a Satellite M70 - cli PSM73C-CL100E and I got a new hard drive and loaded Windows xp. I went on the Toshiba site and downloaded and installed all the drivers. I have no problem with the wifi atheros, the sound, modem or chipset drivers. I also updated the bios v2.10 all successfully.

  The problem is with the video card. I used huntersoft program and know that the chipset is an ATI. He also says it's an ATIradeon xpress 200 m with 128 MB DDR shared video. When I try and install the ATI driver it says Setup could not complete the installation. Try to configure your graphics card with the standard vga driver.

  I spent hours on the net. I tried the ATI L30 XP driver and it does the same thing. I tried the driver ATI radeon xpress 200 m and it says not found material. I don't have the original CD I know he works as the old drive worked fine. Unfortunately, I wiped as well to put in a laptop more old. I should have gotten the drivers out of it. :(

  Does anyone have an idea? It drives me crazy! Thanks for any help. Marilyn

  Hi mjmx4,

  How have you tried to install the display driver?

  Normally, you can install the driver (screen) If you run the setup.exe file that comes with the driver package. Follow the instructions on the screen thanks to the installation of the driver, the driver will be installed.

  Alternative you can install the driver if you go to Device Manager and right click on the graphics card. Choose update driver and use advanced installation where you can choose the directory and the driver yourself.

  By the way: before starting with the installation of the driver, you must install Service Pack 3 for XP.

• Strange problem with display on Satellite M70-200

  I have Toshiba Satellite M70-200.

  When I turn once is not display and once it appears for a few seconds and he return not display anything and not finish this early...

  Help me please.

  Sorry, but I'm not sure I understand you.
  Can you explain more what what exactly?

• Satellite M70-151 - how to upgrade the display driver?

  Hello

  as the topic says I ran out of options to update my graphics card Radeon X 700 on my laptop...

  I tried to see here: http://de.nodevice.com/driver/Mobility_Radeon_X700/get44199.html
  After installation, I learned that he had to go on the manufacturer's site to get my drivers

  So I ended up here: http://de.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=DE
  Still no idea who was the Radeon X 700 driver, I tried every update... Most did not anyway, and when I check my graphics card driver put in says that my current driver was 5 years old.

  Taking advantage of the distraction of the online games I noticed that went it a few seconds sometimes. Most people recommend that you update all my drivers, but it seems more difficult than I imagined

  So please, help me find the right link to update my graphics card! To help speed things up a bit, I added my DxDiag report.

  Thanks for your help

  / Edit: addition of the DxDiag total was not possible due to "inappropriate language"... O.o

  ---------------
  Display devices
  ---------------
  Card name: ATI MOBILITY RADEON X 700 graphics card
  Manufacturer: ATI Technologies Inc.
  Track type: ATI MOBILITY RADEON X 700 (0 x 5653)
  DAC type: DAC (400 MHz) internal
  The device key: Enum\PCI\VEN_1002 & DEV_5653 & SUBSYS_FF021179 & REV_00
  Display memory: 256,0 MB
  Current mode: 1280 x 800 (32 bit) (60 Hz)
  Monitor: (Standardmonitor)
  Monitor Max RES:
  Driver name: ati2dvag.dll
  Driver version: 6.14.0010.6587 (English)
  The DDI Version: 9 (or higher)
  Driver attributes: Final retail
  The pilot/size date: 2005-12-12 00:41:04, 252928 bytes
  Would be WHQL logo: Yes
  WHQL Date stamp: n/a
  VDD: Non applicable
  Mini VDD: ati2mtag.sys
  Mini VDD Date: 2005-12-12 00:40:44, 1414656 bytes
  The instrument identifier: {D7B71EE2-1513-11CF-726B-08DFA1C2CB35}
  Vendor ID: 0 x 1002
  Device ID: 0 x 5653
  SubSys ID: 0xFF021179
  Revision ID: 0x0000
  Revision ID: 0x0000
  Video Accel: ModeMPEG2_C ModeMPEG2_D
  Deinterlace caps: {6E8329FF-B642-418B-BCF0-BCB6591E255F}: caps Frames(Prev/Fwd/Back) = (0,0,1) (In/Out) Format (YUY2, YUY2) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
  {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: caps Frames(Prev/Fwd/Back) = (0,0,0) (In/Out) Format (YUY2, YUY2) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
  {3C5323C1-6FB7-44F5-9081-056BF2EE449D}: caps Frames(Prev/Fwd/Back) = (0,0,2) (In/Out) Format (NV12, 0x3231564e) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
  {552C0DAD-CCBC-420B-83C8-74943CF9F1A6}: caps Frames(Prev/Fwd/Back) = (0,0,2) (In/Out) Format (NV12, 0x3231564e) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
  {6E8329FF-B642-418B-BCF0-BCB6591E255F}: caps Frames(Prev/Fwd/Back) = (0,0,1) (In/Out) Format (NV12, 0x3231564e) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
  {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: caps Frames(Prev/Fwd/Back) = (0,0,0) (In/Out) Format (NV12, 0x3231564e) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
  Registry: OK
  DDraw status: enabled
  D3D status: enabled
  AGP status: enabled
  DDraw Test result: does not work
  D3D7 Test result: does not work
  D3D8 Test result: does not work
  D3d9 Test result: does not work

  Post edited by: Sarahbella

  Hi Sarahbella,

  You can download the driver on the Toshiba site. Therefore, check the link you suggested and look for your model of laptop. As far as I know Satellite M70 151 belongs to the series of PSM71E, to look for with these elements:

  Laptop > Satellite > Satellite M Series > Satellite M70 (PSM71)

  Download the driver and run the setup.exe file.

  Check this box!

• Satellite M70-309: how to clean the LCD?

  Hello world!

  I have Satellite M70-309, so how do I clean finger LCD, dust, ecc... ?

  Thank you!

  Hello Rocco,

  Usually mine clean with a slightly damp cloth (wipe softly on the surface) and then just dry with a cloth. This command removes all the dust and finger marks.

  I also used a normal domestic surface cleaning spray (used sparingly) applied with a cloth and this removes any greasy fingerprints that can be on the screen.

  It is very important to not to use cleansers, abrasives or solvents as they may damage the surface of the LCD screen.

  Kind regards

• Cannot install display driver for Vista on Satellite M70-159

  I made an update to Windows Vista business and I downloaded the ATI Vista "8.31.100.3.2" display driver, but the driver failed to install.

  The past even when I tried to update the windows driver by default through «properties--> update driver...» ».

  No idea why this happen?

  Hello

  I have the Satellite M70-159 with ATI MOBILITY RADEON X 700. I know that it sounds stupid, but I didn't install any graphics driver. I installed Vista Ultimate to test and each hardware component is recognized correctly except sound and SD card reader. Audio driver found somewhere on the net, and SD card reader is not so important to me.