Satellite M71 FN + ALT + number of problem!

Similar Questions

• Satellite Pro P100 - screen and sound problems after upgrade to Windows 7

  Hi all

  I got my Satellite Pro P100 (model number is PSPAEE-00C006EN and the second digit of the serial number is '7') upgraded from Vista to Windows 7, and since then, some bugs seem to have had place - can someone help me on the following:

  -L' screen DIMS increments, irrespective of the fact that I have saved my power settings to stay on FULL (battery or sector)

  -No sound. Once or twice, the sound card worked and settings to say this works correctly (and you can see the movement of the graphic equalizer).
  In terms of PC knowledge, I would be 5/10 (so not a dummy, but certainly not a pro! and we tried a lot of the more obvious things)

  Thank you all

  Hello

  1.) if the screen dim option doesn't properly work, I recommend you to reinstall Toshiba Value added Package. This package controls these functions, the keys FN and others. Visit the Toshiba page for an update!

  2.) did you check if the sound is muted if the equalizer work? In addition you can also try to update the audio driver might it work ;)

• I have 22 SPSS for Mac.  Since I upgraded to El Capitan, I have a number of problems.  I checked the Web sites of IBM, but they only mention fixes for SPSS 23.  Any thoughts would be greatly appreciated.  Thank you.

  I have 22 SPSS for Mac.  Since I upgraded to El Capitan, I have a number of problems.  I checked the Web sites of IBM, but they only mention fixes for SPSS 23.  Any thoughts would be greatly appreciated.  Thank you.

  I am running SPSS 23.0

  You can upgrade to 23.0?

  Also, have you looked here

  http://www-933.IBM.com/support/fixcentral/SWG/selectFixes?parent=SPSS & Product = IB m / + Information Management / SPSS + statistical...

• Number del problema evento: BEX application number: devenv.exe

  I can't launch the application by all means, I have tried almost everything

  This error whenever I try to start the application

  Number del problema evento: BEX
  The application number: devenv.exe
  Application version: 12.0.21005.1
  Marca of tiempo of the application: 524fcb34
  Number del modulo con errores: StackHash_4150
  Version del modulo con errores: 0.0.0.0
  Tiempo del modulo Marca con errores: 00000000
  Exception offset: d4aa3de8
  Exception code: c0000005
  Exception data: 00000008
  Led operating system version: 6.1.7601.2.1.0.256.48
  ID of regional config: 8202
  Additional 1:4150 information
  Additional information 2: 415033a9f1ae6fcc5aebaf4daaa5684d
  3: 86 additional information has 0
  Additional information 4: 86a011b887b8da0d2c7df6b38f9d7e04

  This error seems to be related to Visual Studio.  If you explain what you do to cause this error to appear, it is possible that someone here may be able to help, but I suspect that you would be more likely to get help by asking in the appropriate MSDN (developer) or TechNet forums (technical):

  https://social.msdn.Microsoft.com/forums/vstudio/en-us/home?Forum=visualstudiogeneral

  https://social.technet.Microsoft.com/forums/en-us/home?Forum=whatforum

• I bought a trial 30 Adobe BC and then enabled so I could have the product.  An email is sent with the serial number.  Problem is that I don't have the previous version and computer scientist was here, where he suggested I ask fo

  I bought a trial 30 Adobe BC and then enabled so I could have the product.  An email is sent with the serial number.  Problem is that I don't have the previous version and computer scientist was here, where he suggested I ask you to please provide me with the version complete.

  Did you buy the full version or an upgrade?

• Satellite P300 number keyboard problem

  When I type the numbers on the keyboard in quick succession, I get other numbers entered. For example if I type in '15' on the pad, it will return '165 '. It's that if I type quickly, but if I type slowly it seems not to happen. It's very strange. Does anyone know how to fix this?

  It's strange.

  I would try a BIOS update.

• Satellite Pro U400-13 a - starting problems

  I have a Satellite Pro U400 13A running Windows XP Pro and have startup problems.

  The computer was working well until that last Wednesday when I modified the settings of advanced management power in how he reacted to the closing of the lid [hibernate] or pressing the power [on hold] button. Then, I closed the lid that I had to leave in a hurry.

  About 2 hours later, I opened the lid to take what I was doing and to a complete stop, but I got a partial summary leading to a bluescreen with the logo "XP" just to the right of Center and no home screen or directly in the Windows desktop as expected. Then, the computer does nothing.

  Pressing ALT + DEL shows that both operations are underway - "Windows logon" and "Connection", but the selection does nothing.
  I left the computer up to 6 hours, in the hope that it was a lengthy process that prevented it go further but still the same blue screen rest.

  I forced a shutdown by pressing the power and then restarted in the start menu [Safe Mode etc.].
  According to the boot option I then select [I tried all the] bothers me on the same position that I started with - blue screen with "XP" logo.

  I don't have a recovery disk, nor do the recovery option of disk in the advanced boot menu. I am at a loss.
  I sent the problem to technical support Toshiba but no response.

  What are my options?

  Thank you

  Sean

  > I don't have a recovery disk, nor do the recovery option of disk in the advanced boot menu. I am at a loss. I sent the problem to technical support Toshiba but no response.

  Seems you have to reinstall new OS.
  If you don t have disks or functional HARD drive recovery option, then I would recommend ordering the disc from here:
  http://backupmedia.Toshiba.EU/landing.aspx

  Then you can reinstall the OS in order to get the workbook

• Satellite Pro L300 - 152 Driver Update problems.

  Hi, I'm new to all this and just about managed to find my way to this Web site. I bought a Satellite as above new brand of PC World Business yesterday 22/10/08.
  I had horrible problems to install several updates of Windows that I finally had to install one by one with a re-boot after each update 'Important '.

  I took the laptop with Toshiba and now I'm using Tempro I 5 alerts telling me to install updates various...

  _3 updates the firmware and update of face recognition 1. _ I extracted the zip file and run the progs and get a message saying "this firmware is not compatible with the selected drive. Contact the manufacturer of your system for more information on formware updates available for this drive "."

  1 updating bios which finally ran with Windows Help and then gave the message «ROM date is not older than the date of the BIOS...» "whatever that means.

  I just bought a laptop, I didn't volunteer to become a technical wizz.
  It feels like I'm doing a work of Toshiba troubleshooting here, and I don't know what I'm doing. Can someone help me?
  Thanks, Guy

  Hey Buddy

  To be honest I don t understand why you react so panicly

  You have a laptop that has a pre-installed Vista OS.
  The fact is that this OS Vista was preinstalled on your laptop computer and for several days/weeks, Microsoft has published a large number of updates and so Vista downloaded and installed updates. But don t wonder about other updates. From time to time you will receive these patches! This is a common behavior of the OS.

  With regard to the Tempro tool;
  This tool informs you about new drivers available, tools or utilities on the Toshiba page.
  To be honest I wouldn t use it. Usually, it's really not important what and when a pilot a tool was released if your laptop runs without problem. I'm always this recommendation; never change a running system.

  Hope I could make a clarification.

  Good bye

• Re: Satellite C660 - 1 3 - number "plugged in, not charging."

  Last year, I bought a portable Satellite C660 - 1 to 3 of the United Kingdom; even today, I'm using the factory settings and running the operating system originally installed Windows 7. Here's the question I started yesterday face to leave:
  -Even when the battery is connected and the laptop running, the power meter shows a decline, with the notification level "plugged in, not charging." The orange LED keeps blinking

  -However, when I completely stopped the laptop, without touching anything anyone (not even touch the adapter or the power cord), the orange LED indicates the battery charging process stops flashing and becomes stable

  -Turn the laptop, for about 1 minute or so, the battery seems to be loading (message of orange LED flashes do not and "clogged, load"). However, soon again the orange LED starts flashing and the message of nuisance comes once again to the top

  A number of things:
  -the battery seems to be working well and load properly when the laptop is stop (in fact, until a few days back, the battery used to show 02:30 hours of time available on 100% charge level)
  is there a problem with the operating system? no idea on that

  can experts help me solve this problem? I really don't want to approach the Service because of the long distance involved.

  concerning
  -Biren

  Hello Biren

  Not sure if I can help you but I would like to give you some advice.

  (1) check if your BIOS is up to date. If Toshiba driver European page provides a newer version, then update the BIOS. In addition, set the default BIOS by pressing F9 and save modified pressing F10.
  (2) try to calibrate the battery. To calibrate the battery you completely discharge the battery and charge it again. Repeat 2-3 times in the line.
  (3) remove the battery and the AC adapter and press the power button / stop (30 sec long) and then connect the two parts and check if the LED begin to blink.

  Finally, I think that the laptop needs to be tested using new, good battery to work. But if the issue still persists, then I guess that your motherboard might be affected.

• Satellite Pro L40-15 has: motherboard problem

  Hi all

  I have a satellite pro L40-15 and it was running vista basic but very slowly.

  A friend advised me that I needed to renew the bios for xp install xp. I did, and now he's dead. The fan is not still running, even if the wireless lights and 3 lights above the power switch will Flash once.

  I took the motherboard out (part number 08g2002ta22jtb). During the inspection, there seems to be a reset button on the plateau (near the battery terminals). It is only accessible with the removed card. Does anyone know haw to restore bios factory settings please?

  Thanks in advance.

  John.

  Hi mate,

  It's cool to you finally disassemble your machine. But you won´t get no benefit from this action given that the bios needs to be reflashed by a technician of toshiba, BECAUSE they have the right tools to do this.

  I don't know how or what tools they use, but I had a similar problem on my Satellite A100 and they fixed without the motherboard. (So it was told to me).

  If I were you, I would send the machine to another and the closest to the ASP (certified partner) in your country. They should bring back your machine to life.

  Here´s a [LINK | http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_whitepaper.jsp?service=EU&WHITEPAPER_ID=0 000000871] to a telecommunications service provider ASP if you need help...

  Cheerio

• Satellite A500 - 17 X - RAM upgrade problems

  Hello. I hope someone can help me with this one because it's driving crazy me!

  I recently bought a Satellite A500 17 X from a friend at work. As it has the standard 4 GB, I pulled out and 2x4gb bought to upgrade. The problem here is that the laptop is simply not start with any other RAM sticks in place. I spent over £50 and took the first set back as I thought he had a problem with them.

  The specifications of the sticks:

  PNY 4 GB
  DDR3 8500
  1066 MHz

  If someone can help me here, I would be very grateful!

  Thank you.

  When you want to upgrade RM, it is important to use 100% compatible and also produces high quality.
  I ve checked specification and your laptop can be upgraded up to 8 GB of RAM. Compatible RAM of 4 GB modules have the PA3677U-1M4G part number.

  Order these Rams announced everything will be OK.

  By the way: best Rams offer Kingston so you can also check which modules you can buy for your laptop. Check it here.

• Satellite A200 PSAFCA - serial number incorrect installation system tools

  Hello

  I have a model of Satellite A200 PSAFCA that I recently reinstalled Vista Ultimate on.

  I downloaded all the drivers the most recent & utilities Toshiba NZ (country of purchase), but the following utilities do not settle due a message "invalid serial number":

  * Toshiba Hardware Setup Utility *.
  * Toshiba Flash Cards Support utility *.
  * Speech from Toshiba System *.

  Any suggestions?

  Hello!

  A friend of mine has a similar problem with an incorrect serial number message. The reason was the laptop has been maintained before and technicians forgot to put the DMI information. Has returned to the authorized service provider and technicians has defined the right DMI information. After this no problems!

  For the Satellite A200 PSAFCA you can find all the drivers and tools the Australian Toshiba site:
  http://www.ISD.Toshiba.com.au

  Akuma has already said that the added value package must be installed first!

  Good bye

• Satellite M105 - replacement hard drive capacity problem

  Hello, I recently installed a new hard drive of 320 GB (Seagate Momentus ST9320421AS) in my Toshiba Satellite M105-S3041 laptop to replace the original 80 GB drive.

  I use Windows XP Service Pack 3 and the latest firmware (v2.90).

  However, the new drive is restricted in some way to only about 130 GB.

  The size is not reported in the BIOS, just the model number of the drive. Utility disk management Windows reports the size as: go 127,81 and using a Live CD of Ubuntu Linux and Seagate Seatools reports also this drive must be about 130GB.

  So, I think that it is a BIOS or hardware problem. Can do something to allow me to use the full capacity of this disc?

  Help, please. Thank you.

  As far as I know that some specialists PC uses special tools to manipulate of the BIOS and the ability of the entire HARD disk can be used. But I really don t know what you can do.
  In my opinion, you need to use maximum supported HARD drive, but if you need more capacity for private data, you must use an external 2.5 HDD.

  Friend of mine has bought yesterday 400 GB 2.5 for 99 Euros only. It's a really good investment.

• Satellite P500 (PSPE8A-01R002) - number pad and num lock does not

  Number pad and num lock on my P500 PSPE8A-01R002 does not work after the upgrade to Windows 7.

  Any help will be appreciated.

  Hi AndrewF,

  Have you noticed the same problem on a preinstalled OS from Toshiba?
  As far as I know Satellite P500 are always delivered with Windows 7 OS provided with your P500?

  Anyway, in your case I would try updating the BIOS. You can get the latest version on the Toshiba site.

• Satellite L50 - B - 1 HM overheating problem

  Hello

  I have a problem with my laptop, but for what I really need help is to contact/speak with someone on my current fix a petition (see last paragraph)

  The problem started with my laptop (serial No. YE280915C) making a noise of a piece loose in the upper right corner (where the fan is). This has happened for about 3 weeks, is difficult to detect in the first place where the sound came. It is in warranty and no drops / misuse took place. These sounds were not something continuous, just happened sometimes (about 3-4 days a week and for a few seconds). Eventually she stopped making noise. Then, I received several messages the system talk to me of a refrigeration problem, turn off the computer and call the technical service. While I was doing this task to communicate with them, I have reduced its use. The last day I was with the pc, he died.

  I made a petition to fix it. I'm of the Spain. My real problem is have not been able to talk to a human being throughout the process. I guess that a carrier is coming, but I don't know when or anything. I had to make the request via the web page (toshiba.es/sos) because it was impossible to do it by phone... I received a rational number of this web site, it contains numbers and the letter. I used the phone numbers are:
  -913797302. Meet a robot on your problem, but the end of the line is always busy whenever you called.
  -902283283 / 918004652. You answer the questions of a robot and when he asks you for the number of impact that you can not write letters, so I assumed the number I have is not correct.
  I need assistance to contact someone in Spain telling me if I have to do something more and at what point in the process, I.

  I wrote a very large response, but it gave an error and deleted.

  To sum up, I have two codes, but they seem to not be valid:
  GAB1MW0006
  7402788

  Also contact a supplier (repair within the http://www.toshiba.eu/generic/ASP_SUPPORT/ page site. They said they repair Toshiba product in warranty, but I have to pay the shipping of the product, and that Toshiba's slow pick-up of product and make the process (1-2 months)

  I have need help and advice on what to do.