Satellite NB10t-A-101 refuses to boot from any external media

Similar Questions

• Re: Satellite NB10T-A-101 - cannot boot from USB key

  Hello

  I bought a new Toshiba Satellite NB10T-A-101 and want to improve performance by changing the HDD with a SSD and install windows Pro 8.1.

  However, I am unable to boot from USB, it always mention:
  + Reboot and select proper boot device or insert boot media in selected boot device and press a key. +

  I already disabled secure, used 5 + usb startup different sticks (work fine on other laptops).

  Can you please tell me what the approach is to change the HARD drive and then boot from a USB bootable (UEFI).

  Thank you.

  Hello

  Laptop Satellite NB10T-A-101 was equipped with an Intel CPU 2810 n which is part of the new Intel Bay Trail-M platform.

  This new technology Intel Bay Trail allows installation of UEFI capable systems:
  Win 8 or 8.1 Win

  Just a few questions:
  Have you already changed the HARD drive to SSD drive?
  If so, the new SSD is recognized in the BIOS?
  Have you tried to boot from the USB flash memory stick 8.1 Win until you changed your SSD drive?

• Cannot start OSs of HDD external USB on the Satellite NB10t-A-101

  I'm unable to install Linux on the Satellite NB10t-A-101, because it does not allow to boot from USB or install other OSs.I tried to circumvent this way: (it came with pre-installed Windows 8).

  (1) turning off SecureBoot (which I did)
  (2) putting USB at the top of the list of starting the computer.

  But it does not work.

  I have two HDD USB (a TPG, the other normal) partitioned and it s impossible for them starting with this model of Satellite. I m thinking to return it back to the store that I need to install/start several OSs.

  Hello

  Great that you are using Linux on your PC!

  You mention that you have disabled the secure boot.
  It is very good. But you don't say anything about the startup mode and nothing about what Linux you try to start.

  Most of the distros must support UEFI but that can't be true for each of them.
  If you want Win8 dualboot with a Linux distro, so you need to active UEFI and able to start in this mode distribution.
  If you use a late clone-Ubuntu, Fedora or OpenSuse, you should be fine!

  Another clue could be to take the USB key and try to start another PC from him.
  Which will give a clearer picture of where the problem lies: on your key or the compatibility of firmware NB10 & distro Linux of your choice.

  If you try to boot from a USB - HDD, I'm afraid I'm a bit at a loss as I've never tested.

  I hope this helps!

  Tom BR

• Satellite NB10T-A-101 - mouse pad does not work

  I have a touch screen for Toshiba Satellite NB10T-A-101, the touch screen works very well but I use mostly the mouse pad I find using the slider easier.

  But recently my guarded cursor freezing for a second or two and then to spend once again, but now the mouse pad seems not working with the left and right click buttons work but not the touchpad.

  I made sure the touchpad is enabled in the mouse settings, so I don't really know what to do now.
  Any suggestions would be greatly appreciated
  Thank you

  Hello

  Have Hmm you also checked the FN + F5 key combination?
  This would enable and disable the touchpad as well.

  But from my point of view, it would be possible that the touchpad module is malfunctioning.
  I m thinking about the hardware malfunction because the touchpad buttons work and just touch the touch work area module doesn't correctly.

  Usually, if the touchpad would be handicapped by any software, both; as well as the touch buttons does not work.

• Installation of Ubuntu 14.04 on Satellite NB10t-A-101 does not work

  Hello world

  Sorry for my English: it is not my mother tongue. I'll try to explain my problem.

  I would like to install Ubuntu 14.04 on my computer (Toshiba Satellite NB10t-A-101), but it does not work.

  I boot on my USB (made with RUFUS), but it works once for each five times.

  After you install the operating system, when I restart the system, the computer does not find an operating system (I precise that I already check the EFI BIOS and disable secure boot)

  How to install Ubuntu?

  Hello

  This series of portable was equipped with a processor Intel Celeron 2810 n and this CPU belongs to the new Intel BayTrail platform.

  The * Intel deposit path * allows only the installation and utilization of systems capable of UEFI as Win 8 or 8.1 Win

• Of failure, white screen MacBook Pro HARD drive try to boot from the external HARD drive

  Hello

  I have a 2008 Macbook Pro which is having some problems, I was able to fix them, but eventually the hard drive failed. I know that because at startup until it would have a white screen Uni (no logo) and you can hear a clicking on in the lower left corner. I thought initially it was a memory problem, but after opening and verification of memory, it's clearly the hard drive.

  I solved this problem temporarily (until I can replace the HARD disk) by installing El captain on an external HARD disc and start from that. Here's the twist, I couldn't he can begin to El captain, I tried CMD + R, CMD + OPT + R, CMD + OPT + R + P and now shift. Everything that's happened would be that clicks would cease to release the keys.

  I left the macbook on while I'm at work, when I got home it was on the screen to connect the external HARD drive.

  I accidentally closed the macbook yesterday and again once when I tried to log on, I could not and I left it on a white screen while I was sleeping. There is a possibility that he may have launched from the HARD drive when I get home, but if not, is there something that escapes me to force do this?

  See you soon

  Usually start up to a blank screen without the Apple Logo, may report one of the following:

  • Hardware failure
  • Boot drive is not recognized as valid and updated updated
  • OS X essential software is missing, hurt moved or renamed or corrupt
  • A firmware update is necessary

  No matter who, in order to boot from an external drive "bootable", you would normally hold down the Option key until you get a screen that offers a number of devices to try to boot from.

  Alternatively, you can try holding down the C key to try to boot from the external drive.

  If none of these startup options work, then the bootable disc or the USB port on your MacBook Pro can be the question.

  Since you have a Mac pre-2013, if you hold down the D key while booting, the built-in Apple Hardware Test should start up.  This can help to identify hardware problems.

• My iMac can boot from an external drive?

  Hello

  I have an iMac 21.5 "Mid 2010 which starts to show its age with slowness. However, I plan to upgrade the Basic 4 GB of Ram either 8 GB or 16 GB of Ram, depending on price... and my main question.  I know that the Mac came initially with a 500 GB hard drive and I would also like to upgrade to an SSD because they make a world of difference from what I've heard, but I don't have the level of skill tech to do the steps together 20-30. I wonder, as I have a 1 TB USB SSD externally, if I could install a new version of Mac OS X on the SSD USB and then set it as my boot drive and just keep still plugged. Would this work or startup disk must be internal rather than external via USB?

  Your iMac can be set to boot from an external drive. Just install OS X on the SSD and SSD drive as your boot disk in System-> startup disk Preferences.

• HP Pavilion 500-210 QE cannot boot from any hard drive.

  Good evening. As you can see on the subject, my computer just cannot boot from any hard disk that I put on it. I tried swapping the power supply, SATA cable, reset the BIOS, allowing the start legacy, changing to AHCI to IDE and RAID...

  When I get to the BIOS Setup, I see the hard drive and its features, but it will not start or show when I am trying to install a new OS. I'm not an expert, but I think that the problem could be in the motherboard SATA ports, but I'm not sure. Just to be sure, I tried another harddrive and it did not work as well.

  I was also thinking to buy a HDD external and installation of my OS on it, but I don't even know if it is possible and I would really like to have my computer working again.

  Thank you for your attention!

  Ok. That doesn't say that it is very likely that the motherboard has problems.

  Contact HP for warranty repair.

• Portege Z930 - impossible to boot from the external USB CD/DVD drive

  I have a portege Z930 14U
  I am not able to boot from an external linke (Samsun SE-218) CD player via USB

  I already set the boot sequence and choosed CSM as model BIOS

  Thank you
  Andrea

  Try disabling secure boot in the BIOS too.
  Then connect the CD/DVD from the laptop drive and switch on the device.
  Press F12 and choose from the menu to boot from the USB device

• OS to boot from the external drive

  So I searched high and low, and I don't know if the Toshiba Satillite are able to start an operating system on an external hard drive. I discovered that there are portable computers that can do but their BIOS must beable to do. If Toshiba laptops can do those who can?

  Hello

  As far as I know it of not possible to boot from the external USB HDD.
  I found several postings on similar themes and it seems that it is only possible to boot from the external USB FDD, HDD, ODD and LAN are sometimes also PCMCIA card.

• Boot from USB external HDD - Tecra M5

  Hello!

  Does anyone know is it possible for an OS boot from disk external DRIVE connected to the laptop via USB? There are 'Priority HARD drive' in the configuration of the BIOS with a possibility to choose: USB - integrable - second HARD drive. But it does not work :(

  I tried to start Windows 98 from the external USB - HDD even on my computer at home. Everything is OK...

  My Tecra M5 BIOS version is 3.20.

  TIA

  As far as I know, it won't work. Use of USB stick bootable Yes but not boot OS from the external HARD drive.

• I can't boot from disk external HARD - Tecra M5

  Hey guys,.

  I tried to start my Tecra M5 from disc external HARD with a clone of my hard drive but it does not work.

  Maybe you can give me some advice for this problem.

  with greetings

  Hello

  > Maybe you can give me some advice for this problem.
  This isn't a problem! It's just not possible!
  Regarding a I know that it of not possible to boot from the external USB HDD

  You can boot from these devices:
  USB FDD, disk HARD primary, SelectBay devices, Network (LAN), SD-CARD

  Good bye

• Portege R100 - boot from the external HARD drive

  I have a Portege R100 and the HARD drive has failed. I installed a new HARD drive and I have the Toshiba recovery disks. I tried to boot from a generic USB CD-ROM but the laptop did not recognize.

  I have a disk of Toshiba USB drive it does not recognize and I have a restore disc but I don't know how from there. Do I have to buy a CD external Toshiba and if so, which?
  Any useful suggestions?

  Hello

  Boot from the external USB CD/DVD drive is not possible.
  You will also be able to boot from USB HDD!

  If you want to boot from the CD, you must use a compatible PCMCIA cards (16-bit and 32-bit Cardbus) CD/DVD drive.

  For more information, see this article from Toshiba:
  http://support.toshiba-tro.de/KB0/TSB5100S70004R01.htm

  and this other thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=97343𗰿
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=8991&MessageID=31246

  Good bye

• Dell Latitude 10 ST2e compressed can not boot from an external USB optical drive

  Dell Latitude 10 ST2e compressed can not boot from an external optical drive USB (CD/DVD)

  The BIOS has no setting for it. It will boot from a flash drive. I would like to boot from my CD of 2013 Acronis Recovery Console.  Anyone have any success to boot from a CD/DVD USB drive?

  Yes, there is a way to do this.

  I just did this to install Windows 10 from a DVD on a tablet of 10 Latitude by following these steps:
  (Note: my version of BIOS is A08)

  1. turn off the 10 latitude power.
  2. attach a USB hub to the USB slot unique on the side of the tablet.
  3. fix a keyboard and an external USB CD drive to the USB hub.
  4. now press the button down on the side of the Tablet and simultaneously press the power button for 5 seconds (until see you the screen light up, but will be weak against black unlit).
  5. When you see the Dell logo, start typing on the F12 key (the lower right corner shows the option press the F12 key to choose single startup options)
  6. now start choosing appear with many options to choose from, including my CD/DVD drive.

  Hope it will be useful to you.

• Computer tries to boot from the external drive

  I use a desktop computer with Windows 7.  I have an external hard drive connected as a backup drive.

  While booting, the computer tries to boot from the external drive and nothing happens.

  In order to get the machine to start, I have to unplug the drive hard Ext., which is a waste of time.

  I would like to back up on the drive internally the computer c:

  Is there a way I can stop trying to boot from the external drive?

  At the start of the pc, open the BIOS, usually output tab, search (priority boot device), set C: 1st, 2nd or 3rd external

  Save and exit. Also, more need of HDs to put in shape before using it, most come in a "raw" State the mfg