Satellite P100-324: booting from a USB drive

Similar Questions

• Tecra M2 - boot from the USB drive

  Hello
  Why Tecra M2 didn't boot from the USB drive in the BIOS?
  Is posible put in place this function in the new BIOS.

  Good bye

  Hello

  Good questions for Toshiba engineers.
  I don't think there is anything you can do about it. :(

• Satellite M40 - 244--> Boot from a USB

  Hi all

  I have a Satellite m40-244 with a DVD player which unfortunately is out of service.

  I would like to know if it is possible to boot from a USB key to reinstall Windows or Linux. In the BIOS there only HDD, floppy, CD-ROM, and LAN drive options.

  Does anyone know how to boot from a USB? I tried an external USB DVD drive, it does not work. I don't know if I'm doing the right way.

  Thank you.

  Hello

  As far as I know that of not possible because the M40 BIOS does not support this!
  As you mentioned in your ad; There is only one option for booting from the HARD drive, ODD, LAN and USB FDD (floppy)

  Greetings

• Satellite Pro P100 - cannot boot from external USB DVD

  My internal DVD player on my Toshiba Satellite Pro P100 failed, and my windows is broken.
  So I bought an external DVD drive to boot from, so I can recover the system using the product recovery DVD.

  Now, he actually goes ahead and starts from the DVD. But once in the setup it gives me the message: "ERROR: file Setenv.ini D:\Setenv.ini or X:\Tools\Setenv.ini not found!

  So I went ahead and checked if the file was... it was... but it is on Drive E:\ (probably because it's a USB device I'm starting from)

  -J' did some research and found that I needed to run the command: X:\tools\recogui /FE: say the recovery my files were actually on drive E:-which has helped a little... until I got a new error where it was always looking for the *. TPA file on drive D: eventhough I have via recogui had specified otherwise.

  Now what do I do to understand everything is to the recoveryprocedure on drive E: and not D:, as he seems to think?

  As I am in the middle of a period of review, quick response would be GREATLY appreciated :)

  Bad new boyfriend!
  Boot from external DVD USB drive is NOT possible!

  You can start only from the inside, ODD, HARD, LAN disk and external USB FDD (floppy)

  Greetings

• ACER S7-391 RECOVERY OF A BACKUP ON USB DRIVE - BOOTING FROM A USB DRIVE.

  The manual shows as below: -.

  If it is not already enabled, you must enable the

  F12 Boot Menu and once switched on and registered:-

  During startup, press Fn> + => to open the start menu. The boot menu allows you to choose which device, select the USB drive. Use the arrow keys to select the USB device, then press on Enter.

  I activated with F12 success and after pressing F12(Fn+=) only the windows startup menu appears with no possibility of selection.

  I should if Acer community member can help with instructions step by step on how to get a boot menu by selecting the USB stick to boot from.

  Thanks for help

  Boot Mode UEFI is where you were mistaken. You will need to attach it to Legacy to boot from USB drive and restore your backup, UEFI will happen to return to Windows (according to Acer).

  Your USB flash is bootable, however it does not contain your actual backup (disk image) files. If you did your USB bootable after backup, well, your backup went, as in the process of making a USB flash drive bootable, that the drive is wiped.

  I would suggest to update your Bios, the direct download of the here are more late (2.15).

• Satellite P100 - cannot boot from recovery CD

  Hello

  I'm trying to reset my Satellite P100.
  She runs slowly and I thought that a clean spring was in order.

  I just received in the mail today my recovery disk (then found my original one!).
  Problem I have is that no matter what I do, I can't do the boot cd.

  No matter what buttons I push on I get or anything and one reboots windows or black screen.
  I tried F12, F1, F2, C, f *, ESC, I changed bios priority support via the configuration utility of the material in the Panel to load the cd first, his pirouettes for awhile and just does nothing.

  Whatever i can't load anything other that windows or a blank black screen, cant even get into safe mode.

  Any help please?

  Hello

  > I just received in the mail today my recovery disk (then found my original one!).
  Have you noticed the same thing using two of them?

• Satellite T130 - 10G - how do I boot from the USB drive?

  Hello

  How can I start a USB PEN in my satellite T130 without a cd/dvd player?
  I want to install Ubuntu in my laptop.

  Can someone help me?

  Hello

  You must use a USB bootable flash key.
  Then you could try to choose the USB key as device, press F12 when applying power in the start unit. Then a menu with bootable devices should appear.
  Then, you can use the arrow keys to choose the USB as a source of start-up.

• ENVY of HP dv6-7246us SSD Upgrade, problem Windows 7 installation with boot from a usb/dvd drive.

  Hi all

  I recently bought the dv6-7246us and have updated for one SSD HARD drive. The problem I have now is I can't boot from usb or dvd drive that contains the Windows 7installation. Initially, this laptop has a HDD with Windows 8. I changed the boot order to boot from the USB drive and the CD-ROM/DVD-ROM drive several times and have still no chance to start to the top of the installation. Is there a solution to this problem?

  Thank you

  Robert

  Hi, Robert:

  Go you into the BIOS and change in legacy Mode?

  I think that you need to do in order to boot from another device other than the hard drive.

• HP 15-af131dx: unable to boot from a flash drive

  My HP 15 - af131dx don't let me boot from a live bootable flash drive. I was able to boot from the drive on my hp mini 110 computer and in the past, I ran Ubuntu on a USB key and it worked fine. What should I do?

  Hi @HPlaptop51,.

  Thanks for the HP forums post!

  I read your post and wanted to help. I understand you want to boot from a USB drive on your 15 HP - af131dx. Please try to access the boot device Options and select boot from USB drive.

  To access the Boot Device Options, turn on the computer and immediately press ESC to display the Start Menu and press the F9 key. The USB key may not appear in the menu of Boot Device at all, unless these an optical disk drive or USB drive is turned on, plugged in and holds a bootable media source.

  Let me know how it goes.

  If this post helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me congratulations.

  Kind regards

• Satellite U400-10j - how to boot from a USB flash drive?

  Hello

  I have a Toshiba Satellite U400-10j.

  I have Ubuntu on my USB flash drive, now I want to boot from it.

  I can't find the option in the BIOS to boot from the Usb flash drive.

  Second, I noticed that the phone also has an internal memory card reader.
  I could load Ubuntu top then to start the memory stick as well?

  Your help will be very appreciated.
  Thank you.

  I think that it s not able to boot from a USB key on this laptop.
  The best way is to use a CD. There, you can start on this notebook and all other laptops.
  In the Internet there are many versions of CD of Ubuntu and other Linux systems.

  And as said Feliks, it s not able to boot from an SD card because it is not in the BIOS.

• Please, I beg you! Boot from a cd drive external usb

  Please tell me how to boot from a cd drive external usb in a toshiba satellite 1405 sd-151

  Hi Luuzz,

  as you probably know for boot from CD push aprox key 'C '. 3-4 seconds after pressing the power button / stop.

  This procedure has been done by the 'U' key to boot from the USB device.

  Maybe it doesn't work because your machine is an American model, then look it up in the BIOS setting if an external to start device is available!

  Please test and provide a response for reporting!

  TOK

• Satellite Pro U400 - can I boot from a USB?

  I am wanting to partition the disk and I don't have a blank CD at hand...

  Surprised to discover, there is no option the BIOS to boot from devices USB 2.40.

  Please can someone confirm for me that this is not possible?

  Thank you.

  L.

  Yes, you can boot from USB FDD, primary HARD disk, optical device and network (LAN)
  Unfortunately, the USB is not supported ;(

  But if you want to create a new partition on the HARD drive you don't need to boot from a USB n.
  Are you using the Vista on your Satellite Pro U400?

  If so, you can use the Vista Disk Manager to create a new partition.
  To reduce the first partition first and then you can create a new partition using a new space on the HARD drive.

  Concerning

• Satellite Pro A120 - cannot boot from CD/DVD drive

  I have a Toshiba Satellite Pro A120 of friends, he was running very slow so I said I'd do the usual for him.
  Back up all his documents, and then reinstall windows. not so easy!

  First of all, try to boot from the CD so I can boot into Ubuntu or reinstall windows.
  Me has taken long enough to work, I had to press DEL/ESC to enter in the BIOS, but once I put to boot from the CD (and was a bootable CD in the drive), it kept just boot from the HARD drive.

  From time to time I get an error saying + "Media test failure - check cable" + or something similar, theres a lot on internet on this subject.
  I think its something to do if the boot order has CD first, then it has LAN as 2nd.

  Able to boot Ubuntu from a USB key.
  Try to copy its documents on my external drive but really copying REALLY slow (like 1 MB/s) and kept getting IO errors on some files.
  I can't run diagnostic software for HARD drive that I can not boot from the CD (could get the Ultimate Boot CD on a USB but if anyone thinks it would help?).

  In windows, the CD player only reads real CD (audio similar DVD, not CDR and DVDR).
  This means a failing drive?
  What intrigues me most, however, is that I changed the portable CD player with a CD of work of another computer and windows recognize today this new CD player at all!

  By putting a bootable CD in this new CD player, it always starts from the HARD drive (do not recognize CD player in all).
  The BIOS is a bit unnecessary and does not show the detected disks...

  Also, boot Ubuntu from a USB key, with the original CD player, he reads real CD and DVD copied of all zeros are considered blank discs and replace the CD drive with a known working in Ubuntu means its not recognized at all (if this isn't windows driver problems).

  When I started messing around with it I remember windows say the time had been reset, so I set the time properly, then he did the same thing again I think. A flat CMOS battery could not be responsible for this?

  Is the motherboard and specifically the IDE controller or a broken ports, or am I doing something stupid? I'm tempted to just install Ubuntu by USB and tell him not to bother with CD more ;^)

  Any suggestions or comments would be much appreciated!

  Thank you
  Dan Gent

  > Me has taken long enough to work, I had to press DEL/ESC to enter in the BIOS, but once I put to boot from the CD (and was a bootable CD in the drive), it kept just boot from the HARD drive.
  You see the CD/DVD drive in BIOS? I mean all the details like the name WEIRD etc.
  If this isn't the case, then it means that your CD/DVD drive is not recognized by the BIOS due to a hardware problem.

  If you can see the STRANGE in the BIOS but are still not able to boot from any disk, then I suppose that the CD/DVD drive cannot read the disk for different reasons.
  One of the reasons could be a defective or damage the laser lens

  > Every so often, I would get an error saying "Media test failure - check cable" or something similar, theres a lot on internet on this subject. I think its something to do if the boot order has CD first, then it has LAN as 2nd.

  Yes, this error means that your laptop tried to boot from LAN

  > In windows, the CD player only reads real CD (audio similar DVD, not CDR and DVDR). This means a failing drive?

  As I said above, it would be possible that the reader s laser lens malfunctions and, therefore, the ODD can't handle the media. It seems that the laser lens can not calibrate properly and can not move in the correct position. This question is not repairable and the drive needs to be replaced.

  > What intrigues me most, however, is that I changed the CD drive with a CD of work of another laptop and windows don't recognize this new CD player at all!

  The fact is that not all CD/DVD drives are compatible due to different master/slave/C-salt settings. You must use the supported players! In most cases, you can find a list in your user manual what CD/DVD readers are compatible.

• Pavilioin P6710f: Changing Bios then boot from a USB flash drive

  How can I update my bios to enable booting from a USB Flash drive. My bios is American Megatrends 6.07, 04/05/2011 and the only options are CD, hard disk, floppy. Is there a way to change this? To test the Windows 10 repair disk I created, my system froze to the blue screen "choose" keyboard layout. I couldn't use the usb mouse or usb keyboard. As a result, I had to restore my system to windows 7 using my Norton Ghost recovery disk and backups that I had done before downloading windows 10.

  After the opening of the bios and clicking on the hard drive by default, I found that I had a choice, including the USB Flash drive that I have pugged just forward to restart. This answered my question. Thanks to everyone for their contribution. It was not necessary to Flash the bios after all.

• Satellite M30X-165 only boot from a hard drive possible

  Today, I tried to upgrade from Windows XP to Windows 7 but no media like CD/DVD bootable and works of disk removable (USB key).

  Notepad only boots from hard drive.
  With F12 I have a start menu, but no matter what I select that does not work and Windows XP boots from the hard drive. Later, I changed the boot sequence in the bios, but it does not work.

  Finally, I did a bios update 1.60 zu 2.00 but I still have the problem.
  How can I boot from DVD or USB stick?

  Try please enter the BIOS and set it to default settings. After doing this, try again please.
  Optical disc drive recognized and listed correctly in the BIOS settings?
  It works when you use it in Windows?

  Also try another thing. Put the bootable disc in ODD and shut down your laptop. Reboot and press the C key several times. If I m remembering well this should force ODD as first bootabe.