ACER S7-391 RECOVERY OF A BACKUP ON USB DRIVE - BOOTING FROM A USB DRIVE.

Similar Questions

• Rescue and recovery lists no backup on USB Iomega eGO drive

  Hello

  I have been using an Iomega eGO external backups USB drive.

  I was able to identify and remove (if necessary) backups in Windows 7 and rescue & recovery running, but I can't get the list of backups at the start of a recovery in rescue & recovery DVD.

  Basically I replaces unencrypted with a SSD hard drive that supports encryption.

  The goal was to use a full backup immediately before removing the HARD drive to restore the complete system.

  At the start of the recovery DVDs, recovery utility & rescue lists not all backups, even when the check box for the list of backups on other systems is checked.

  It makes no difference if the selection of THE places or USB external drive.

  Any ideas?

  Backups are not much good if you can't get back them.

  If my old drive did not then I would be in a worse state than this. I can't say I'm impressed.

  Well, I've finally sorted this issue.

  I tried to create a new recovery disk.

  I even tried the recovery time in Windows and see what backups it detected. Yet once, I drew a blank.

  The question was this:

  On my W510 at least, none of the USB3.0 ports are recognized by Lenovo rescue and recovery software when you select the USB storage device. Once connected to a single USB 2.0 port the USB eGo has been recognized and listed backups.

  Unfortunately, this means a minimum of 6 hours to restore from a full backup!

• Miix2 10: Boot from USB - Image-Backup

  I want the image backup my "nine" 10 boot from a WinPE Acronis True Image Home 2013 USB Stick Miix2.

  But: The Tablet does not start this (or another) stick. I tried with enabling / disabling startup secure without success.

  What BIOS settings must be used, and what are the prerequisites for a bootable for Miix2 10?

  Thank you very much
  Michael

  Hello

  can't speak for Acronis WinPE, but Macrium reflect WinPE (32-bit indeed) boots fine and works well on Black 2 10 "." I'm starting last Macrium reflect WinPE CD ISO via USB optical drive emulator, but other dΘmarrez successfully for ordinary USB flash.

  With the Tablet turned off, press Vol - and keep it pressed all by pressing the power button / stop for entering the UEFI boot menu.

  EDIT: haven't touched the other BIOS settings that secure boot power down. There is not much to do in the BIOS/UEFI anyway until Lenovo decided to hide all the interesting parameters of we...

  Tomas

• Huge problem with the system on my laptop Acer s7-391 acer recovery disk

  Hi all, I'm really desperate as my laptop have stopped working for the weeks and I need it back

  First question: I installed the window 10 free upgrade successfully, however, I decided to restore the laptop through the window 10 plant factory restore Start menu because there were a lot of unnecessary files and after the window factory restore, I am unable to start again under the window and I get an error message says "no bootable device detected" and the computer goes into a reboot loop no way to factory restore to new outside the window. I try to reset the battery several times and nothing works!

  Second question: I received my acer restore disk that I got from the acer site because I didn't not create recovery media to when my window was working. So I pop the disk with a usb CD-ROM and I was able to get into recovery by the disc menu. However, when I try to choose the option of disk factory restore, he said to start from legacy mode. However, when I go to legacy mode he gave me an 0xc0000017 error code saying: not enough memory to create the virtual disk. If does not work reinstall drive

  Anyway to solve the above problems, should I do it before I jump into the Acer restore with legacy mode disc? Should I send it to Acer for repair? I really need this phone in working condition.

  Thank you guys!

  A live bootable CD is probably the best option for your situation:
  http://www.partitionwizard.com/Partition-Wizard-bootable-CD.html
  Download the .iso file
  then use a software to burn CD/DVD or USB flash drive and burn the .iso file
  Once completed, put the CD/DVD/USB on your PC, boot from CD/USB (maybe you need to start under the legacy if you have the UEFI BIOS)
  Press F12 on startup and choose the CD or USB
  at the level of the Office
  Select your HARD drive
  Right-click on the icon for your HARD disk, and then choose Remove all xxxx and click Yes, and then apply
  http://www.partitionwizard.com/help/delete-all-partitions.html#HOWTO
  or wipe your HARD drive completely (it will erase any GPT or MBR at the disk), choose the first option after selecting the clear function.
  Exit the wizard partition, boot from the BIOS, UEFI return of the Legacy (if you have the UEFI BIOS) and boot from media erecovery.

• can't reinstall OS in Acer S3-391

  I have an acer Aspire S3 391 - the calculation is crushed - since then I'm trying to restore and got the Acer CD 5, including drive systems. I can't go to the Restore screen, but then, on disk 1, it fails to find the partition. It says OS partition with 0.0 MB of available space. I don't know what to do. I tried to log-in using CD of swallows and format CD - I can see all partitions on disk 0, but it still does not work during installation. I was able to secure all data, but that's all

  concerning

  Pinaki

  OK, start with Mini-XP.

  Once started, double-click command prompt

  type

  DiskPart

  type

  list disk

  type

  Select disk 0

  (I guess that you only have 1 HDD on your system)

  type

  clean

  type

  output

  Now your HARD drive is completely erased out of mini-xp and boot from your recovery media.

• Satellite L300 - 20 d - recovery system disk backup is missing

  I have Norton Protection against viruses and when I backed up my laptop I saved the backup in the D drive which is partition backup drive...
  I want to factory reset the laptop but I can't do t it says can t find disk backup

  Is there a CD I can clean the laptop with... I think there must be something missing in the D drive backup.
  Can someone tell me how to sort plsss
  I have no backup disk and no CD came with the laptop that I lost.

  The history is somewhat confusing.

  Factory settings you can have on two different ways:
  -using the installation discs for recovery
  -with the help of HARD drive recovery option > http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm

  > I want to reset the laptop but I t this, as it says t find disk backup
  Can you please explain to us how you tried to reset the laptop to the factory settings and on how you got this message?

• Acer S3 - 391 Windows 8 Pro Pack

  I recently bought an Acer S3-391. This unit will benefit from Windows 8 Pro Pack, and, if so, what additional features I will win?

  Thank you!

  I found this on the Dell web site (forum allow me to post a link). Closer, I found a clear description of what is in the Pro Win8 Upgrade Pack:

• Acer S3-391: FN F3 does not not on windows 10

  Acer S3-391: FN F3 does not not on windows 10

  just received my unit refurbished and improved Windows 8.1 to windows 10.

  everything seems to work great except the F3 FN keys which is for wi - fi.  I don't really need since I can access it from the taskbar, but it would be nice to do work.

  After some research, I found that I need to install the "launch manager".

  When I go on the site acer to download this driver, it does not give me the option for all drivers for windows 10.

  Help, please.

  Thank you very much.

  You'll need quick access:

  http://global-download.Acer.com/GDFiles/application/quick%20Access/quick%20Access_Acer_2.00.3008_W10...

• Rescue and recovery cannot find backups - EXCEPT in the restore function. Help

  I recently optimized files, including placement
  the disk - machine now flying.  "I wanted to start from scratch with R & R).  Thus,.
  delete all local backups and USB.

  I started a basic backup - initialized manually, close,
  restarted, returned the top could not backups - display Message "No. BACKUPS
  FOUND "hen"show all the backups", or"delete backups"Advanced"
  menu.  However I can find them using the RESTORE OF THE BACKUP.

  Repeated starting a new backup, same results exactly, except
  now I have two BASE backups.  I even started in the R & TV R
  environment may find things out there.  No luck - no possibility to launch a backup Boot TV
  environment, but could restore from the backup.

  I don't see any other choice other that uninstall 3.01?  Do you have?  However, the most recent
  version there is 4.22... Any reason why I shouldn't go to the
  new version?  I read all warning, installation notes, bugs, etc., none seem to apply to me.

  If anyone has any ideas, I would be happy, or if you know any
  reason why 4.22 isn't a good option...?

  Thanks in advance

  Type of computer rescue & Recovery version 3.01 T60 = 2623 - model.
  D7U

  All, I finally managed to replace the version of R R & on the Master Boot Record.

  First, I started with a R boot drive at & R.  You can either use one you did with R & R when (if) you put always a full backup on CD (which I do every year), or the startup disk (a, a) that Lenovo is sent to you with the 7 product Recovery CD, you can restore your PC to specifically state that you received from the factory or store (if you have purchased again).

  R & R starts automatically on startup with the version of R CD R & makes the startup disk (be it when you or Lenovo is the startup disk.)

  My experience is that after you start with this CD, I shut down R & R normally, then restarted the computer by using the MBR (pushing the Thinkvantage or F11 key at the beginning in the trunk) and voila - it starts with the same version that you started with the CD in the last step.

  I also discovered that if you use R & R to restore to a time when the Version of R & R was different from what is working on the MBR, which also change the MBR.  Again, both are good information that will certainly be useful trivia some time.

  Thanks again to all who jumped and provided information that ultimatelly led to the solution

  concerning

  Fred

• Rescue and recovery of backup fails: current drive does not match the previous backup

  I have just rebuild my T60p with a new hard drive for the recovery of Lenovo CD via the rescue and recovery CD. Once the system restore is complete and the laptop running, I took a full backup using Rescue and Recovery. This backup is the C:\ drive which was the only drive I had and was on a USB hard drive.

  In recent days I have the C:\ split in two, giving me a new D: drive, patched all system software, added my own data, and obtained the machine configuration as I want. I've also trashed the R & R hidden partition so I could make a bigger drive D:\ and created my own bootable CD R & R for future use - not that it makes a difference.

  Now, I want to take a second backup with the Rescue and Recovery tool. Naturally I want to back up the disks C:\ and D:\, but the backup fails saying: -.

  "The last backup of this system include the following drive letters: C: .

  Your system is now back up these drive letters: C: d:

  Please define drive letters, as they were before and Christine backup. You may need to exclude partitions created since the last backup. »

  Is there anyway that I can make a backup of disks C:\ so my D:\?

  The only option I see is to delete my previuos backup and I don't want to do because it can be useful in the future if I still want to restore my system to original state manufactured.

  Suggestions anyone?

  Thanks, Iain

  Given that you have saved on an external USB disk your backup will be saved in a

  the folder named RRbackups.  If you rename this file I - think - R & R going to think

  you do not have any backups, so the next backup will be a 'base '. If you

  never have to restore the original of your 'base' backup, rename the folders should allow.

• The Acer Aspire BIOS recovery procedure

  I ran BIOS update program accidentally in my Acer Aspire desktop on windows 10 PC, the program began suddenly and run in the DOS window, then it crashes before finishing, don't know what stage was when crashed on the BSOD, which needed PC to restart to the no reboot No Acer logo, black screen and PC beeps a long short beeps, tried to boot from USB but as long as the screen is black, I can't do anything, only to become recurring beeps.

  You don't know how to recover the BIOS, if someone had this problem with the BIOS and manage to recover the BIOS, I very much appreciate their help on what to do.

  Thank you

  Hi, thanks for the information and the link that I found very useful and informative, to find the good BIOS I couldn't find the option to select the operating system, the operating system is required to download the drivers only. I don't know how to deal with that and if the OS is or is not required when BIOS downloding.

  I also found some information in the user manual on the version of the BIOS and how to recover the BIOS on page 25 failure, but it is unclear what BIOS to use the original during the expedition or the latest version or the other between two release dates?

  What is meant by the wrong BIOS is specific, bad model, or an incorrect date?

  Thank you.

  I look forward to hear from you.

• Error recovery in the backup database

  I got the following error to the standby database. No idea what this means and how can I get it without a full clone.
  
  
  Kills Aug 14 17:23:32 2012
  Recovery Media Log /spdata07/SPDB/fra/FINSP_GDRSD_LISTENER_NL/archivelog/2012_08_10/o1_mf_1_11131_82bmbgvs_.arc
  Kills Aug 14 17:23:32 2012
  Errors in the /spdata07/ora_11202/product/dbhome/rdbms/log/spdb_pr00_24915.trc file:
  [ORA-00600: internal error code, arguments: [2619], [11131], [], [], [], [], [], [], [], [], []]
  Completed: alter the managed standby database recovery database using the current log file disconnect from the session
  Use ADRCI or Support established for the packaging of the incident.
  See Note 411,1 to My Oracle Support to error and packaging details.
  Errors with /spdata07/SPDB/fra/FINSP_GDRSD_LISTENER_NL/archivelog/2012_08_10/o1_mf_1_11131_82bmbgvs_.arc newspaper
  MRP0: Background Media Recovery terminated with error 600
  Kills Aug 14 17:23:34 2012
  Errors in the /spdata07/ora_11202/product/dbhome/rdbms/log/spdb_pr00_24915.trc file:
  [ORA-00600: internal error code, arguments: [2619], [11131], [], [], [], [], [], [], [], [], []]
  Managed Standby recovery not using real time applies
  Recovery interrupted!
  
  
  spdb_pr00_24915.TRC trace file:
  
  
  
  
  Has started the recovery of parallel media
  krsh.c 17:23:31.503 4265 2012-08-14
  Managed Standby recovery to apply in real time
  Dumping table incarnation of database:
  RESETLOGS 0 Yvert and time: 22/05/2012 0x0000.00000001 20:55:23
  Incarnation of recovery targets = 1, activation ID =-328156793
  The flow buffer limit = 55611 min (50% x 111222, 100000)
  
  2012-08-14 17:23:32.106
  Start the recovery to the thread 1 ckpt SNA 26430758 logseq 11131 block 2
  Initial size of the buffers: read 1024K, K 820 overflow, change 805K
  
  2012-08-14 17:23:32.132
  Add a Media Recovery redo thread 1
  
  2012-08-14 17:23:32.249
  Recovery Media Log /spdata07/SPDB/fra/FINSP_GDRSD_LISTENER_NL/archivelog/2012_08_10/o1_mf_1_11131_82bmbgvs_.arc
  = Critical error (any incident) dump (ORA 600 [2619]) =.
  
  2012-08-14 17:23:32.315
  dbkedDefDump(): from the default crash dumps (flags = 0 x 0, level = 3, mask = 0 x 0)
  -Error stack dump-
  [ORA-00600: internal error code, arguments: [2619], [11131], [], [], [], [], [], [], [], [], []]
  -SQL statement (none).
  Run SQL information not available - no cursor.
  -Call trace stack memory-

  ORA-00600 = open an SR to MyOracleSupport.

• boot from recovery partition

  I did a clean install of windows 7 ultimate on my (touchsmart 600-1220)

  I got to the recovery partition, what I want is to restore my pc to its factory condition, I searched prior to this announcement, and the only solution was (in addition to order recovery disks) puts the recovery partition as active F11 or urgent on boot, but no work

  where can I install HP Backup and Recovery manager (there was the logo from cyberlink that I can remember)? have not found on HP support

  or is thre a way to burn the files to a DVD set? I don't have access to the files (size is about 11.4 GB)?

  also, is the reason why F11 does not work is that the MBR (master boot record) was modefied?

  Please, I really need help here, I would buy recovery discs if the th recovery partition is corrupted, but it is not, the only problem is that am not able to boot from the recovery partition, to aid with the exception of the recovery discs would be great

  Thank you

  You can buy the DVD of HP recovery for less than US $30, the machine also harassed you previously but at some point you probably said "does bother me no more."

  By far the best way to handle this is to buy them at this stage.

• Can't boot from USB on laptop Acer NC-V5-571. another boot enabled is bios and I tried option in W8

  Can't boot from USB on laptop Acer NC-V5-571. another boot enabled is bios, but and I tried to boot from usb DVD etc. (starting from things that works on other PCs. I've set USB and DVD as a priority higher from startup in the BIOS. I get the alternative start menu, choose DVD or USB, but it starts just Windows 8.

  I tried to boot from an external device in settings PC - general settings in the charming bar, but it starts off directly with Windows 8 too.  the DVD plays fine films, and if I plug the boot device dvd W8 sees them and their content because I expect too much.

  Any ideas on how to boot from another device.  I would like to take at least a decent backup using Acronis.

  Thanks in advance for any help

  Ted

  Boot from an additional media under Windows 8, you will ensure that you have either disabled Secure Boot or changed to UEFI in the traditional mode.  The following articles describe how to do this.

  Passing UEFI BIOS mode to legacy

  How to enable or disable secure boot

• Backup external hard drive

  I recently bought a computer with Vista Home Premium 32 bit. I attached an external hard drive to it. I want to keep the clean C drive with only the OS and programs held on this subject. The external hard drive contains files of data and images. I have attached a second external hard drive to the computer. I want to be able to plan a backup from the first disk to the second external drive, but the backup and Recovery wizard seems to allow only a backup of the drive C. is there something that I am missing in the wizard? Or is there something else I can do for my first external backup drive?

  Thanks for the help!

  Hi rdenn_58,

  Thanks for posting your request.

  The back up files Wizard, included in Windows Vista Home Basic Edition, Windows Vista Home Premium, Windows Vista professional, Windows Vista business and Windows Vista Ultimate Edition, allows you to save your files and data from an external hard drive, CD, DVD, network location and also a secondary hard drive. Although there is no option to schedule a backup to an external drive to a second external drive using the Back Up Files Wizard.

  To copy or move files from one external drive to another, you can use the following steps:

  You can create a backup of the files on a CD or DVD before you copy or move files.

  To copy the files from the first disk to the second external drive, you can use Windows Explorer by going to: start > click computer > double click on the drive letter for the first external drive and then copy the files / folders that you want to back up, and then paste the second external disk drive by opening a second window of the computer. You can also drag and drop files from the first disk to the second external drive using Windows Explorer.

  For reference below is a useful link to more information. using the backup center and restoration:

  http://windowshelp.Microsoft.com/Windows/en-us/help/9eb3d150-FE33-41A0-B7F6-233d7fe4460a1033.mspx#EPG

  Thank you and please let us know if you need additional assistance.

  Mary
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.