Satellite P100 - 434 PSPADE randomly loses connection WLan

Similar Questions

• Vista cannot find the mouse USB - Satellite P100 - 434 PSPADE driver

  * Need help to install a mouse optical usb on vista32 *.

  I have two mice, two optical usb, 1 wired and 1 wireless. They are the two plug-and-play so when to plug their vista must locate and install the right drivers automatically... it can't.
  Vista search drivers on the disk and hard on the internet.

  "" looking software... looking for an online software.. "."

  Then says:
  "Windows encountered a problem installing the software driver for your device."
  Windows found driver software for your device but encountered an error trying to install it.
  USB Human Interface Device
  The system cannot find the specified file. »

  They are plug-and-play and just install automatically, there is no driver CD that come with the mouse.

  I have a Toshiba Satellite PSPADE P100-434 with Vista 32 bit purchsed new 2 weeks ago.

  Help, please... Thank you!

  It's strange, because the standard optical mouse should be installed without time and without the need of specific drivers.
  Did you check the homepage of the manufacturer for drivers?

  And have you installed all the latest updates for microsoft windows and SP1?

• Problem with external monitor when used with the Satellite P100-434

  I'm trying to use a Vizitron L - 151 monitor flat screen connected to the VGA port on the back of my Satellite P100 - 434 (PSPADE)

  I find that the screens seem to periodically - feeding cycle windows resize themselves and then the screens settle down again. This happens with the laptop and the external monitor.

  I've updated the latest available BIOS V4.20 (November 2, 2007) I use 7.15.11.6369 NVIDIA GeForce Go 7600 driver version. I'm under the edition of Vista Home Premium to standard build.

  I even resorted to the use of the dvd system recovery to rebuild completely the laptop and the problem persists. In Device Manager I have generic Non - PnP monitor and below that I have a generic PnP monitor I tried and it is not possible to get specific drivers for the monitor Vizitron L-151. * NOTE * I saw dxdiag that the external display is identified the Non - PnP device

  The display configuration that I'm trying to use is to have my laptop as the main screen with the external display on my left as an extension to the desktop. In display config my computer screen appears as number 2 with the additional display in the poster as a device 1

  While typing this my screens have made this three times and the last time, this IE7 window installs itself to the external display in restored down to size.

  If anyone has a glimpse of it, I would be very grateful. There are no problems when the external display is deleted.

  _I can reproduce this problem on demand_ by uninstalling the monitor Non - PnP Device Manager.

  Sorry, mate, but you ad confuses me a little and be hones I m not 100% sure what you take on
  You have some problems with the resolution of the external display or what?

  I've found another thread on the setting of the external screen as main screen:
  http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=96263#96263

  According to this statement:
  > In display config my computer screen appears as number 2 with the additional display in the poster as a device 1
  It seems that the external monitor has been on the main screen and display books internal as external.

  I recommend you change this settings and to use books appear as 1 and the external display form 2.

• Re: Satellite P100-106 PSPADE - replacement for Panel problem

  Hello

  I have a problem with the screen on my model Satellite P100 - 106 PSPADE 018110G 3.

  I changed the old Panel LG PHILIPS LP171WX2 (A4) (K7) (she has wide stripes without a photo) with the new a LP171WP4 Philips (TL) (B1) and after the first start, everything worked OK but more later when I turn it on there there's no picture, only automatic backlight is activated, windows starts because I hear it log into the sound on the speakers.

  When I turn back old Panel everything works correctly.
  Also when I connect external display its signal on it, with old and new Panel on laptop.

  Is there a solution for this problem?

  Thank you

  Can I just suggest you to test an another Billboard.

  The card isn t the problem since the external monitor works fine.

  It shouldn't be a problem with FL inverter for the backlight seems to work also.
  This is why I believe that this new Panel must be tested.

• Upgrade CPU on Satellite P100-434

  Satellite P100-434 BIOS v 4.80 does support the Core2Duo T7500 Intel proccessor?

  I'm currently have T5500 and want to update to T7500, is the same thing but I don't know the motherboard/BIOS card can support this CPU?

  I advance thank you

  For CPU upgrade, there are several different important things and not the BIOS only.

  Check it please this Toshiba document initially - http://aps2.toshiba-tro.de/kb0/TSB9401AX0001R01.htm

  BTW: I m not sure but I think you can find similar topics related to upgrade CPU on P100. Use the advanced search in this forum. Maybe you'll find some interesting discussions.

• Satellite P100-434 won't boot to the top

  Hi Ive got a Satellite P100-434 and Ive had for more than a year.

  Unfortunately today I couldn't get started.

  The power led lights up, the HARD drive makes light very briefly.
  The display lights. If she does not even there to boot in the bios.

  Any idea what the problem might be? Im hoping that the CPU or the motherboard is not fried.

  see you soon

  John

  Unless you bought the extended warranty, I don't think you have a lot of luck. My suggestion is to return to the place of purchase, if you still have warranty.

  However, try to remove the battery for 1 minute and then replace the battery again. Try it turn on.

  Also try with the power cable plugged in power and remove the battery.

  If all else fails, then you have a very expensive paper weight.

  Good luck.

• Satellite P100 - 434 BSOD boot problem

  Hello everyone!

  I have laptop Toshiba Satellite P100-434 and lately I encountered many problems during startup.

  1. the laptop starts normally until the entry of the password. Then, in the middle of typing BSOD.
  2. the laptop gets BSOD or turns off 2 seconds after the Microsoft bar appeared.
  3. the laptop won't turn on - after launch is only a flash of three blue LEDs on the right and the screen remains blank. No home Toshiba screen.

  After a few attempts I managed to get the Toshiba welcome screen (this is after the second flash), but there are other issues later, the laptop shuts down or trying to launch startup repair. He speaks only of unspecified error and restores the previous state.
  4. I tried to enter safe mode, but several times I met the same: the laptop turns off after loading some drivers.

  BSOD are too short for me to identify what is ongoing - I noticed something just BAD POOL and IRQL NOT EQUAL to something as if it was something with the drivers, no doubt the NVIDIA driver display. I uninstalled and downloaded a new and installed (version 7.15.11.5666). EMH is NVIDIA GeForce Go 7600. Once, there was some information about dxgkrnl.sys?

  I did the Test of memory Windows at startup - no error.

  I scanned for any viruses: my AVG removed some Cryptor virus, but the problem is still there.

  The operating system is Windows Vista Home Premium SP 2.

  I don't know what the problem is. This is the driver of display or any other driver? Or maybe some powers of the problems? All advice welcome!

  > Anyway: I would like to know if the problem is hardware, or rather the related software, because I take my laptop to repair if there is something I could do download/resettlement.

  This question can be easily answered: you must install the Windows operating system.
  If the windows installation would be finished correctly and if you will not see another BSOD after installing, it emits so was related to the (software) system. But if the system is not possible or if BSOD would appear during the installation and after installation, then I suppose that something is wrong with the material of s for laptop.

• Play Call of Duty 4 on Satellite P100-434

  Hi all

  I recently bought my Toshiba Satellite P100-434 (Intel 1.66 Dual / 2 GB RAM / Go7600) and we just tried on the game system.
  I installed COD4 and tried to play, but it seems that the laptop has trouble running.

  I've updated my display drivers for 32-bit vista nvidia those downloaded from this site seems to have done very little, or even no difference.

  I only run the game with each setting to minimal with resolution of 640 x 480 and it is still fighting.
  Everything on the laptop must be sufficient to operate this game except for the cpu that is recommended a dual 1.8 and it's a double of 1.66. just that would be why the game does not work as well?

  I would not have thought so.
  I have had friends who have run this game on pc spec worse.

  Any suggestions what might be my problem or what else I could do to improve performance?

  Thank you very much...

  Hello

  If have a Satellite phone with an AMD processor performance and the most recent card ATI Radeon graphics.
  I m running Windows XP due to the better performance of game. Vista needs of more material resources, and that's why I prefer the XP.

  Anyway, last week I ve installed the COD4 and believe me this game needs more resources than you think.
  However, you should be able to run the COD4 using resolution 1024 x 768. But it s another question if COD4 will run smoothly.

  However, I found a Toshiba FAQ doc about a few videos "stutter" during the game using Windows Vista:
  Check this box:

  [New video driver and BIOS eliminates video "stutter" during the game (Windows Vista): http://askiris.toshiba.com/ToshibaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=1924 764xml & sliceId = & dialogid = 46208288 & stateId = 0% 200% 20 46206416]

  With regard to this doc the driver display & BIOS update should improve performance.

  Good bye

• Stream video slowdown and going out of sync on Satellite P100 - 434 Vista

  I have a Satellite P100-434 pre-loaded with Windows Vista and WinDVD. During playback of DVD video, the video stream slows and goes badly synchronized with audio after a short period of normal play.

  The video then jumps and will be back in sync for a short time before going off again. I found references to this on a general search of the web with the only offer the solution of reloading with XP.

  I confirmed that with Windows XP Home edition, the problem does not occur, and with Vista it always happens with PowerDVD v7 good than not as pronounced. I would like suggestions as to the cause and possible solutions.

  Well, what to say seems the Vista itself or the drivers are responsible for this problem!
  As you already suggested the use of the Win XP operating system would be simpler!

  Anyway, the laptop uses the nVIDIA GeForce Go7600 FX card. Then first try to update the graphics driver and check a few improvements!
  Try to use the drivers from the site omegadrivers.net

  In addition I recommend you disable the acoustic silencer maybe it would help

• Satellite P100-434 - how does the safety lock?

  Satellite P100-434. There's a safety lock on the back of the laptop, how does it work?

  Thank you for the answers.

  That s quite simply. This security lock allows you to paste an especial laptop lock designed for the table.

  Check out these useful examples:
  http://us.Kensington.com/HTML/2219.html

• Satellite P100-434 former necessary BIOS

  Hi all

  I'm in serious need of an older version of BIOS for a P100-434 (PSPAD/E) laptop. I recently flashed my BIOS with the latest version 4.80 and experiencing problems:

  -My CD/DVD drive disappeared
  -Anything but SpeedFan HD0 is on fire - Temp1, Core 0 and 1 which above 50 ° C and my GPU above 60 ° c.
  -The fans continue to go off like crazy
  -It sometimes freezes

  After flashing, it is automatically rebooted and froze for 10 seconds or more and then Windows took forever to load all the drivers (the continuous loading bar for 21 or more seconds, usually only takes half that).

  I was running version 4.70 front and had completely (as far as I could tell) no problems with it, but I thought that the update it could give me more stability. I'd appreciate any help you can give, thanks.

  When the new BIOS update is available version is not downloadable more. What you can try is to contact the nearest authorized maintainer and ask for help. They have access to the database of Toshiba and I'm pretty sure, they can get the older version for you.

  1 / to be honest, I can't imagine IRREGULAR maturity has nothing to do with the BIOS update. Optical drive is recognized in the BIOS, Device Manager or Windows Explorer? Remove from the list of Device Manager, restart the laptop and check again. Also check the method offered by Akuma

  2 / believe me these temperatures are not critical so there is no reason to panic.

  3 / If you want to reduce the cooling fan activity change the parameters for the method of cooling. These settings, you can find in Toshiba power saver utility.

  4 / for periodic freezing issues is not easy to offer a solution. Watch carefully what happens exactly. Maybe some responsible activity of this freezing issues.

• Satellite P100 - 444 PSPADE: need the Cardbus controller drivers and ultramedia for WinXP

  Hello, I have a Toshiba Satellite P100 - 444-PSPADE and I need Cardbus and ultramedia controller for Windows XP drivers, please.

  I did not find them on the official website of Toshiba. Thank you.

  Hello

  won´t you need them, the drivers for cardbus to be included in the utility/driver chipset from intel. Other stuff like flashmedia etc. will be installed when you install the flashmedia driver.

  See you soon

  P.S.: If you have already installed everything then check your device if Manager something is missing. If everything is installed, then relax and be happy.

• Satellite P100 - 216 (PSPADE) - CPU / RAM upgrade options

  Hello guys,.

  I just got a laptop Satellite P100-216 (PSPADE-01400UEN). (card: T5500 - GeForce Go 7600 512 mb, 200GB)

  It has a Core 2 Duo T5500 inside and I intend to upgrade as well as the RAM to make a good laptop for my wife.

  The question if CPU is supported (assuming that the latest version of the BIOS). I am interested in the series with FSB800 or same T9000 T7000 series (1066fsb) shall if possible because I can get them pretty cheap - I know that the T5500 is just 667fsb by itself, so I wonder if the higher FSB is supported or I stay with 667 Mhz.

  Have searched through the net, but no information so far. Would not buy CPU only for it being not recognized by the laptop.

  Any advice would be much appreciated.

  Kind regards

  It is very nice for laptop and if you want to upgrade the RAM upgrade for your wife. In combination with the operating system pre-installed and optimized its own missus will be like to work on this machine.

  Upgrade of RAM is quite problematic and you can do it alone. what you need to do is get the compatible modules and high quality.
  I think now P100 has 2 GB of RAM, but you can upgrade to 4 GB.

  As compatible modules, you can use
  TOSHIBA
  PA3513U-1M2G (memory 2 GB DDR2-667 Kit) or

  Kingston
  KTT533D2 / 2G 2GB 533 MHz Module
  KTT667D2 / 2G 2GB 667 MHz Module

  On the CPU upgrade, I would just say that we forget. As a first step, it is not necessary to do so and secondaly - http://aps2.toshiba-tro.de/kb0/TSB9401AX0001R01.htm

  Bye and good luck.

• Satellite P100-324 - network card losing connection

  Hi all

  I'm a new user here, I have a * Toshiba Satellite P100-324 * with Window XP - 32 bit Media Center Edition.
  I have problems with my network card that seems to me to lose the connection network and need to reset the IP (repair) every time than in quite awhile to find the connection.

  What do you suggest to me what is the problem? A hardware problem or a software (driver)?

  Thank you in advance.

  Hello

  At the moment it is not easy to say what is the reason for this, it could also be a problem of the cable network.
  Did you check this first with another cable?

  If you have determined that the cable is not defective, you should try to update the network adapter driver. The latest version which is pre-tested on your laptop is that you can find on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Do you have other laptops or computers connected to the router? Maybe the problem is the router

  Good bye

• Satellite P100 - 444 PSPADE: where to find XP drivers

  Hello

  I just got my laptop new P100 - 444 (PSPADE). I removed Vista and installed XP SP2. First of all models of PSPADE is not found in the driver download selection. I used drivers for another series of P100 model. Most of equipment is detected, but not all. modem driver and the sound does not work, I tried of the former pilots, new drivers for other models but without success.

  In name of the Vista driver for the sound card is named: Conexant High Definition Audio, the modem is also conexant. After an intens research I found nothning. Toshiba does not seem worth free XP drivers so far, but there must be a work around.

  Any person having simular problems or who has solved this problem.

  Please contact me.

  Hello Peter

  Believe me you are not alone with this. Check please other subjects in the area of the Satellite. I will just repeat that right now probably Toshiba has enough work to create the latest drivers for the Vista capable notebook for complete support of Vista. Update takes precedence and not downgrade.

  No one knows when the dryers for WXP will be available, but I'm sure that it won't happen soon.