Satellite P200 - 10G screen turns white cause driver

I was gifted a Satellite P200 - 10G, works great so far, only if I try to install the graphics driver (Intel 945 G), both that of intel and Toshiba one my screen goes black on each Windows (XP, Vista, Win 7, Win 10). It works with the standard Win drivers (except Win7).
Any ideas why this is happening. And maybe a workaround?

Regardings

mindscraper

If I understand the question, the laptop works properly using the standard Windows graphics driver that is part of the system and standard resolution (I guess that 800 x 600 or 1024 x 768 or something like that).

But after the installation of the driver graphics card, black laptop display changes and nothing is visible on the internal display. Right?

This happens also in the external screen/monitor?
Check it out

But to be honest, the question looks like a malfunction of the graphics card.

Tags: Toshiba

Similar Questions

  • Satellite L300 PSLBGE screen turns white after a while.

    I * model Toshiba Satellite L300 PSLBGE * and I have never seen this problem before.
    I use my laptop since last year in fact my laptop screen turns white after spending some time on it, usually after 10-15 minutes...

    sound also stop here and the only solution is to reboot, after that reboot it still works well, but after a while once again its screen turns white.

    Please help for this problem

    Post edited by: bharatjaiswal5

    Hmm have you tried to reinstall / recover the laptop to see if it helps to solve this problem?
    In my opinion you should try it because it could be a problem in the system.

    Otherwise if new system installation / restore does not help you, it could be a malfunction of the equipment.

  • Satellite P200 - 10G - some programs do not work

    Hello world.

    OK, so we have a record of product recovery and we have tried to reinstall Windows, but it wouldn't work. Some of our programs as the built-in webcam and Bluetooth don't work without reason. Other programs like Google Earth and AVG, antivirus, we cannot get out of our system. I installed the laptop with the recovery disk, but now when I put this drive and I try to reinstall Windows, nothing happens. There is no error message or anything. All the programs that I installed in my notebook, I can't delete. For example Google Earth, & AVG antivirus program. I get a message that says that these programs are already deleted, but they are always in my book. My 80 GB of disk c is almost full and I have no idea what occupies this space. All my music and photos etc are on my E drive.

    Does anyone know what we should do?

    Much appreciation,
    Musa

    According to the specifications of the laptop Satellite Satellite P200 - 10G has no module BT and BT will not work.
    In the disc specification HARD is described as 120GB (5400 RPM) SATA. The question is: do you still have original HARD drive inside or you have upgraded with a new one?

  • Why the Satellite L300 laptop screen stays white?

    Why the Satellite L300 laptop screen stays white?

    Hello, I have a Toshiba Satellite L300-29U over purchase, turn when he was first an hour about it looks a whole without problems, then the screen was blank. Feed again in a couple of times more hours after rest and passes him still takes some time to operate.

    What is your recommendation?

    Thank you for your response.

    Post edited by: Sams

    Hello

    Why?
    Who knows what have you that your screen is white?
    My screen is not white it shows everything correctly.

    The same white screen will appear on the external monitor?
    If so, then this problem may be related to faulty graphics card, if no, your laptop computer s display can be defective

  • When trying to view videos full screen, the screen turns white!

    When I try to watch videos, I love to watch full-screen, but when I press the icon full screen the screen turns white. I have to press the ESC key to return to normal. What will fix this?

    i right click on video > select settings > remove the check mark from material

    Acceleration.
     
    II] download and install: -.
    Adobe flash player: -.
     
    III] update your graphics card driver on the website of the manufacturer of the graphics card.
  • Restart computer, windows xp screen came then the screen turned white

    Restart computer, windows xp screen came then the screen turned white

    Hello

    1. have you made changes on the computer recently?
    2. do you get an error at startup of the computer?

    Check to see if the problem exists in Safe Mode, if the computer works as expected in mode without failure, then we can solve the problem in the clean boot state.
    a. refer to the article below for the procedure safe mode in Windows XP
    A description of the options to start in Windows XP Mode
    http://support.Microsoft.com/kb/315222

    b. you need to perform a clean boot to find the program that is causing and then disable or remove.
    How to configure Windows XP to start in a "clean boot" State
    http://support.Microsoft.com/kb/310353/en-us
    Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.

    I hope this helps.

  • Re: NB200 - making noise and the screen turns white

    Hello

    My laptop makes the high pitched noise and the screen turns white. Please help with this question.

    Thank you

    Hello

    It is especially as this problem with the inverter. She is, die, and made a noise of pitch. Try to connect the external monitor and check if it is displayed.

    Welcome them

  • When I turn on my emachine and try to check my e-mail, I get my homepage to google for about 1 second and then the screen turns white with bee.pl.

    HELP me get my E mail.

    When I turn on my emachine and try to check my e-mail, I get my homepage to google for about 1 second and then the screen turns white with bee.pl.

    http://INFOTEP.bee.pl/info.php?avted=;     I'm not that day on computers, and many of their functions and a few times I get a little lost in there so if anyone can help me I really appreciate it.    Thank you!!!

    Hello

    1. what operating system do you use?

    2. What mail client do you use?

    3. you have made any changes to your

    4. what site you're talking about?

    5. How do you access the webpage?

    6. you use Internet explorer or another browser to access the site?

    The link give http://infotep.bee.pl/info.php?avted takes me to a blank Web page

    Are you referring to http://www.bee.pl/index

    Refer to the following, who says that the sites host malware

    http://www.Google.com/SafeBrowsing/diagnostic?site=monidopo.bee.pl/

  • 11 - e010nr after the signature on the photo and a few icons appear and then the screen turns white and reappears

    Laptop TouchSmart 11, e010nr 11, windows 8, no error message. I can Ctrl/alt/del and obtain the lock... the Task Manager screen. This screen works but nothing else

    Hi danny61,

    Just to clarify , when your screen turns white and reappears, the icons reappear also? and do you not see that set the desktop background or the taskbar? that it could be as simple as restarting the Explorer process in the Task Manager.

    If you can update me if I can see how I can help

  • P2412H - displayed briefly and then the screen turns white.

    Hello

    I got a pair of monitors of P2412H little more 3 years, bought from a dealer - I don't have tags and monitors say manufactured in September 2011 (so I think that, apart from any warranty).

    This morning one of them has failed - it displays briefly, then the screen turns white.

    Manual test:

    1 unplugged every wire and power button which is held for 15 seconds.

    2 reconnect the power cord.

    -Switch will blue

    -L' initial Dell boot screen is displayed on the screen for less than a second.

    -L the screen turns white.

    -Stays blue power button

    3. press one of the control buttons

    -Nothing happens

    4. disconnect the monitor

    5. connect the monitor to on PC with Windows connected using DVI.

    6. connect the power cord

    -Switch will blue

    -L' initial Dell boot screen is displayed on the screen for less than a second.

    -L the screen turns white.

    -Stays blue power button

    I also tried to reset the monitor according to the instructions of the manual by pressing keys 1 and 4, but as the monitor does not appear, I couldn't see anything.

    The monitor did briefly revived properly after one of my attempts back manually, but the after turning on and the new to check if the problem itself had set the monitor returned to the not displaying no not again.

    Can anyone help or point me in the right direction on how to fix it?

    Thank you

    * UPDATE *.

    Disassembled the monitor I've used this as a guide to youtube to open the monitor the safely:

    cs_setInnerHtml ('video_aebd897a-01ed-42eb-a8c5-b3b6ecee6556', ");

    Inspect the circuits printed for all the obvious problems such as cracked soldering or fried capacitors.

    Could not see the obvious problems... you realign a couple of back vertical capacitors where some of them were in sharp corners appeared to be very close together as a result.

    Back together carefully.

    Backwards and now it works very well for 48 hours.

  • BlackBerry Smartphones do - what do I do when the blackberry starts to load, but then the screen turns white

    A couple of weeks, I have recharge my phone and he kept on his auto turn off or not charging well so when I rang Virgin they told me to buy a new battery I did, I loaded the new battery in another phone blackberry by following the instructions at and when I got the new battery for my blackberry torch It started to load as usual but the screen turned white and it turn off its self.

    You need to ring up Virgin again and explain to them that it was not the battery because of your questions.  It is for them to take in charge your device and, as appropriate, to support RIM to get is resolved.

  • Satellite L500 - 19 X - screen turns white (white light)

    Hello
    I have a Toshiba Satellite L500 - 19 X, and my screen is not working properly. When I turn on the computer, the screen turns off, but it gets lightened, it becomes white.
    The external VGA output works fine, I have no problem with an external monitor.

    I already changed the flat cable (Flex) that goes to the screen, but I got the same results.
    Can someone help me? What could be the problem?

    Thanks in advance!

    Graphics card is correct because you said that the external monitor is working properly.
    So I guess that screen internal or the FL inverter is the troublemaker.
    But that's just a personal opinion, I think that you will need to test the two parts

  • Satellite A210 - 17L - screen turns off

    Hello people,

    I have a similar problem to [http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=61255&tstart=15], screen turns off by itself randomly, but backlight remains lit and laptop always seems to work (judging by fan). This started after upgrading Vista to Windows 7 (new installation), there was no problem before. I tried to update the display driver, first ATI Catalyst, then Toshiba official one, the customer pays less often, but still doesn't work, it's nice embarrassing ;) It occurs regardless if the laptop is used or just slowed down and is not caused by overheating or saving energy, also cell is generally connected with mounted battery.

    I have the last opportunity to go and update the BIOS, but I'm in fear of bricking the thing, so he would try as a last resort.

    Any idea guys?

    Thank you

    Hello

    There is an easy way to solve this problem: connect an external monitor and check what happens. If everything is ok on the external monitor installation (Windows) and internal monitor are ok, the problem must be internal monitor itself.

    If it s the monitor itself it s inverter FL, LCD cable or LCD itself. That s is not easy to say on this virtual path for your laptop needs to be checked to an authorized service provider. Guys can make an accurate diagnosis.

  • Re: Satellite P200 - installation of XP and SATA driver

    Hi guys

    I'm new to the forum.

    I know there are already 100 topics on installing XP on a Toshiba Satellite P200 and believe me I have lived all of them, but I'm still fighting trying to install XP.

    I will describe the steps I've been through so if someone could tell me where I'm wrong or try something other way out then let me know:

    I went to the following site to download Intel Matrix Storage Manager:
    http://Downloadcenter.Intel.com/Filter_Results.aspx?strTypes=all&ProductID=2101&OS FullName = Windows * + XP + Professional & lang = eng & strOSs = 44 & submit = Go %21

    First of all, I downloaded
    32-bit floppy Configuration utility
    (F6flpy3287)

    Now the first download did not contain an exe file, so I've been to unzip and copy the files on my floppy drive. I inserted my XP SP3 CD and rebooted the laptop, when XP installs the Setup files, I pressed F6 (that she mentions at the bottom of the screen) after installation of the files, that it says something like that couldn't detect the drivers and press S to select one of the pilots in total there are 4 riders, I chose all alone (so did 4 facilities in total) , but it keeps giving the same error.

    The error itself says something like the hard drive is not detected and to be honest its make me lose the will to live because I spent hours trying to figure this out.

    As there are two managers matrix downloads I tried the other as well:

    32-bit floppy Configuration Utility for Intel Matrix Storage Manager version 5.5.0.1035
    (F6flpy32)

    This one was an exe file, I have attached my USB floppy drive ran the exe file that has copied the files and I tried to choose once again each of the 4 drivers the entire installation, but it says the same thing no hard drive detected.

    Someone help me please, I would really appreciate it.

    Thank you

    To be honest, here are really quite subject to this subject and enough descriptions how to do this please, read it.

    I think the simplest is that you download the storage on the Toshiba site manager.
    Then, you can use nLite to integrate the driver on the CD.
    After that, you must also start the CD and then the HARD drive is detected (you don't need to press F6 to load the driver.

    And here's all the necessary links:
    http://EU.computers.Toshiba-Europe.com
    http://www.nliteos.com

  • Want 1 7 screen turns white

    I bought this Envy 17 3D in December 2010 of HP Websight. The model is WY771AV and running Windows 7 with 1080 p and uses 5875 A M D graphics.  The last 30 days @ initialize to top the screen will turn white United when I try to start. All I can do is push the switch down to be able to try again. 9 0% of the time, new attempt fails (does the same thing), but sometimes I can go to the Startup Repair, run system restore and use the machine for 2 or 3 times before the next exit white. Help? Please tell me what hdwe plot fails so I can replace it.

    Solved thanks for the suggestion! I used an HDMI cable to a TV and downloaded the latest AMD graphics driver from the HP Web site. Once finished downloading the file, my screen is is relit and worked fine since. Thank you once again!

Maybe you are looking for

  • How can photos off my iPhone after download

    I need pictures to be automatically removed from my phone, after that I downloaded and stored.

  • Tecra S1: Screen starts flashing and is now black

    Hello. I have a Toshiba Tecra S1. Its 4 years. Last night my screen suddenly started flashing and my computer froze. I had to reboot my computer and then the screen starts sometimes, but mostly it stays black. If splash screens, I have only gently sh

  • HP Photosmart C5100: hp c5100 grave Solution Center crashes after windows kb3132372 10 update

    Solution Center crashes after Windows update KB3132372 10 (December 29, 2015). The Windows Device Manager shows not installed printer as on a regular basis. Printer will print but scanning is very heavy and the ink levels will not appear. Uninstall a

  • cartridge light

    Hello I print with the Pixma ix6520. When the light flashes every 2 to 3 seconds on the cartridge, it must be replaced immediately, or is it just a warning? It flashes more quickly as it nears empty? Thank you Anthony

  • Cannot open winlocker, yo safe.

    I have an Acer Aspire 7535-5020 perloaded came with Win-locker. I have the password.  When I click the icon a MyWinLocker tab appears on the task bar, but that's all.  Nowhere else to enter the password.  I have used many times before without any pro