Satellite P200 - 144 BIOS update 1.50

Similar Questions

• Satellite P200 - 157 BIOS update failed - need help

  Hello

  I bought a P200-157 to my son in summer 2007.
  My son decide without asking me, upgrade the bios of motherboard with the VICTORY of 1.70 he downmloaded on the Toshiba download server.

  He started the update in windows mode.
  Unfortunalety, the upgrade stopped during the backup previous version. The laptop was frozzen.

  It never boot from the problem of the tha.
  I'm tying to create a crisis, but recovery disk it of seem to exist different versions of PHLASH16. EXE.

  Do any of you know if crisis mode-recorery is available for laptop P200?
  What version of PHLAS16. EXE is required and in what mode the disk has to be create (native DOS mode)?

  I bought a USB external floppy drive and try the last days, but unsuccefully.

  Kind regards. Yves (France).

  Hi dude

  That s a pity :(
  The update of the BIOS is always a tricky process and there is always a small piece of risk.
  Usually, if the BIOS update has failed then you need a help of a technician of the ASP.

  The point is that you would need an update of the traditional BIOS to reflash the chip for the BIOS again.
  But the Toshiba driver page provides only the victory of the BIOS which can be updated only from Windows OS-based.

  Therefore, you will need to contact a local ASP which might help you.

  Dude good luck

• Satellite P200-144: Touchpad works does not after Microsoft Windows Update

  Hello

  I have a Satellite P200-144 and since I installed a new Synaptics driver provided for me through Windows Update the touchpad did not work.

  I tried to roll back the driver, re - install a new installation of a driver Alps (as suggested by a messsage on board), but this has no effect. I tried to revert to a previous state of the system, but this fails to happen.

  I am running Windows Vista Home Premium that came with the noteboos when I bought a few months ago. I also went in the settings in the control panel and none of the settings work - help!

  Someone has it has happen to them, or does anyone know of a fix for this?

  Kind regards

  Chris

  Hello

  a quick and efficient solution would be to backup your data on an external (DVD, USB - HDD, etc.) to recover your machine and then to AVOID such Windows updates, as this driver IS not native drivers from the manufacturer. Just install the drivers supplied by toshiba, since they act on your machine.

  Unfortunately I have Don t have another solution for you, then it would be best to try this method and give a quick answer if it worked.

  Welcome them

• Why Age of Empires 2 does not work on my Satellite P200-144?

  I have a Satellite p200-144.
  I can't get to run, aoe2 something about directly?

  Hi mate,

  After things to do 2 AOE will continue to operate:

  -go to the microsoft website and download the latest version of directx. Download and install it.
  -go to the toshiba driver download site and download the latest graphics driver (if available). Download and install it.
  -go to the microsoft Web site and search for some updates for the game. Download and install it.

  Should help and make the working set...

  Welcome them

• Installation of Satellite P200-144 recovery disk problem

  Model Satellite P200-144 PSPBGE

  Hi all

  Today I received a 2nd recovery disk mail via UPS directly at Arvato distribution GmbH

  Yet once there not in the exact same place as the 1st disk that I received but returned and they replaced.

  My original recovery disk was lost around the House 3 months back, which I am now myself kicking on.
  Reason for restoring factory default settings was that I wanted my pc to be clean like a cell phone factory default as it was full of registry errors.

  In any case on the problem, after that 67% of image recovery happens with the corrupted file, here is the installation proc.

  Try to rename all the letters of potential left to HDD0
  Try to rename all the letters of potential left on HDD1

  Microsoft DiskPart version 6.0.6000

  Copyright (C) 1997-2007 Microsoft Corporation.

  On computer: MINWINPC

  Disk 0 is now the selected disk

  DiskPart succeeded in erasing the disc

  DiskPart succeeded in creating the specified partition

  Partition 1 is now the selected partition

  DiskPart successfully assigned the letter of the drive on the mountpoint.

  100 percent complete

  DiskPart successfully formatted ther volume

  DiskPart succeeded in creating the specified partition

  Partition 2 is now the selected partition

  DiskPart successfully assigned the drive letter or mount point

  100 percent complete

  DiskPart successfully formatted ther volume

  DiskPart marked the current partition as active.

  Define RECO-info-guid = 4D2AE583-8FD5-4D7D-AE07-B098C1CBA1B5
  RECO-info-imagecount value = 2
  define the RECO-info-partnumber = 1
  RECO-info-numsplit value = 5
  RECO-info-bootindex value = 0

  L ' ImageX for Windows tool

  Copyright (C) Microsoft Corp. 1981-2005 all rights reserved.

  Progress: 67% 06:44 minutes

  [WARNING] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat. [United Nations
  [compress files: (seq.90)-> file corrupted block at offset 012E3CF9]

  [RETRY] Restore C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat.

  [WARNING] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat. [United Nations
  [compress files: (seq.90)-> file corrupted block at offset 012E3CF9]

  [RETRY] Restore C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat.

  [WARNING] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat. [United Nations
  [compress files: (seq.90)-> file corrupted block at offset 012E3CF9]

  [RETRY] Restore C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat.

  [WARNING] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat. [United Nations
  [compress files: (seq.90)-> file corrupted block at offset 012E3CF9]

  [RETRY] Restore C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat.

  [WARNING] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat. [United Nations
  [compress files: (seq.90)-> file corrupted block at offset 012E3CF9]

  [RETRY] Restore C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat.

  [WARNING] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat. [United Nations
  [compress files: (seq.90)-> file corrupted block at offset 012E3CF9]

  [ERROR: 1392] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat.

  ResourceExtractToFileByStruct: (seq. 50)-> Uncompress or WimCopyFileEx failed

  [ERROR: 1392] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat.

  Error image restoration.

  The file or directory is corrupted and unreadable.

  Error: ImageX could not apply E:\05021XSP.swm Index 2 Weird Vista in C:!

  Is there a reverse this problem?
  My thoughs is that the image is corrupt.

  The error that you declare, is a fault with the Vista disk image cannot be applied to the hard drive.

  Which you used 2 recovery discs of different product, which would indicate that there is not support for product recovery but a defective hard drive, possibly bad sectors on the hard disk.

  If the laptop is in it duration of warranty, then give Toshiba a call for the book on deposit for a repair of the equipment.

  0844 847 8944

• Satellite P200-144 - lost profile user & Running very, very slowly

  Hi, please excuse my explaniation below, but I'm not very technical interest and need help?

  I have a Satellite P200-144 curries in Sep 07 was bought for my college courses. I listened to a CD of night via windows media player. CD proceeded to freeze and then I got an error message something in the sense of "windows media player database corrupted", then the machine stops. When it restarts itself, my user profile and associated parameters have disappeared (as well as my documents, music, photsos etc.). Once the machine booted, I log in under my usual profile, but he told me that my profile would not load correctly and I've been signed by using a temporary profile? In addition, the machine seems to have trouble doing anything at any great speed; each individual operation is taking an absolute age... to open the internet browser is as slow as dial-up almopst and I am supposed to have high-speed broadband! The machine makes a quiet rattling noise that was not previously; someone suggested maybe it's my hard drive?

  On the advice of the internet and others, I tried the following:
  Creating a new user and copy my user data-error message back sying this did not succeed.
  Twp machine restoring previous dates separated - "error unidentified" who did not do so.

  Please help... anyone?

  > The machine makes a quiet rattling noise that was not previously. someone suggested maybe it's my hard drive?
  Hmm, HARD drive failure is possible... maybe some bad sectors in the partition or HARD drive, however, this is only speculation and a new installation of operating system from the recovery CD would be necessary and advisable to ensure that this is not a HARD drive problem.

  Of course you should backup you files and important data because this procedure would format the HARD drive.

  I know it's a radical procedure, but it is necessary to make sure if the problem is hardware or software associates.

  Good luck and best regards

• Satellite P200 and new update of BIOS 1.70

  Hello

  Toshiba just released update 1.70 for their P200 model BIOS. Notice that I've seen is that the Logo has changed since in touch ith tomorrow at Toshiba leading an and the Intel logo is now black.
  haven't noticed all the new settings.

  Thx for the report of change. Would be interesting why change their icon... weird... :D

  Wish you a nice weekend

  until the next update ;)

• Satellite P200 (PSB0E) - BIOS crashed

  Unfortunaly, I have crash of the bios for my laptop.

  I downloaded crisis recovery disk tools and I'm looking for the correct version of phlash16 tfor the Toshiba Satellite P200 to create the disc.

  Help me please!

  Hello!

  Updates to the BIOS on the Toshiba site are only Windows based so I think that it of not possible recovery BIOS yourself or flash in DOS mode.

  The only solution I see right now is a professional help from an ASP. Technicians can try to reflash the ROM module
  Here, you can search an ASP:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider

  Good bye

• Satellite P200-144 never stop correctly using Vista Ultimate

  Recently made a regeneration of my P200-144. Used with Vists Home recovery disk. Then upgraded to Vista Ultimate. After it was sold went to the web site of toshiba for the latest drivers and decided to update the bios.

  To restart the laptop is it never shutdown properly. Left with no other choice it off (left by logging out of the screen).

  Now computer laptop won't do anything. Is it possible to get the bios to boot / restore or do I need to reach a support centre.

  Hmm, looks a little more that the BIOS update failed?  :|
  Usually, in such situation the ASP help is necessary.

  But before contact you the ASP and will be sent to this device on the balance I would recommend removing the battery and disconnect the laptop power adapter.
  Then wait about 20 min, then reconnect both sides and try to start the laptop.

  If you won't be successful then the help of ASP is required

  Good luck

• Satellite P200 - 143 BIOS does not refresh

  Hi all. New here.

  Try to update the BIOS on my P200-143. The current version is v1.30, I; v2.70 ve downloaded from the Toshiba Web site, but every time I try and flash, I get the error code:-120 to winphlash

  BIOS update failed! New BIOS is not compatible wth THE current system BIOS.
  New part number of BIOS does not have part number for the system BIOS.
  Error code - 120

  Any help appreciated.

  No help from here but I replaced Windows 10 64-bit with the 32-bit version, then the BIOS flashed fine v1.70. I unfortunately still the problem of the orginal laptop reboot when I keep plugged in, rather than close.

• Satellite Pro M30 Bios Update

  Hello

  I have a satellite pro m30 and I would like to make a bios update. Utility hardware Toshiba says that my bios version is 1.4. The existing updates see 1.2, 1.6, but it says nothing about 1.4.

  Should I take 1.6?

  Any help?

  Thank you

  Hello

  It might be possible that the BIOS version 1.4 is the version of BIOS default manufacturer for this model.

  In my opinion you should take the 1.6 version because it is the most recent and it may be necessary!

  Here is the link: http://eu.computers.toshiba-europe.com
  go to Support & Download - Download BIOS - choose your M30 SP and click for the Description of BIOS for more information!

  Bye Bob

• TR/agent.1220467 detected as I ran that Satellite A100 PSAA2E BIOS update file

  I was about to update my BIOS Toshiba laptop Satellite A100 PSAA2E on-site official (I downloaded the update file and unpacked to run it):
  http://EU.computers.Toshiba-Europe.com/innovation/download_b * ios.jsp? service = EU
  When my antivirus (Avira Antivir Personal) has detected a TR/agent.1220467

  Of course, I stopped everything, asked to remove, Avira have another full scan, it was deleted again and restarted my PC.

  I am always very careful with what I download, but as I trusted blindly the official site of Toshiba as being safe, I don't run a virus scan on the file update and stupidly flat it once it has been downloaded.
  HOW CAN TOSHIBA HAVE INFECTED FILES TO UPDATE HIS SITE? This is really unacceptable.

  And now how I will:
  1. ensure that this virus is gone for good?
  2. switch to update my BIOS knowing that it is not safe to do?

  Please help me!
  .. .and make sure that this file to update the BIOS is not infecting hundreds of other users!

  Hello

  Don t worry buddy there is no virus
  The BIOS file is safe and I guess that your virus scan recognized the file as a virus because of the similar application procedures

  First of all you should not update your BIOS if your laptop works well!

  Second, you must disable all 3 rd party applications like virus, firewall, malware, software software of scans, while the BIOS update!
  These tools can affect or interrupt the process of updating the BIOS and the laptop cannot!

  You know that the update of the BIOS is a sensitive technique and if something goes wrong during the update, then you will not be able to power the device!

• Satellite P20-801 BIOS update

  Hi all

  I have a question about updating the bios on my Satellite. I got it off ebay a few months back, reinstalled the OS and now try to update the drivers, bios, firmware dvd - rom etc.

  I tried to download the update of the bios for my laptop (PSP26E-02V79EN) and according to the toshiba site, the latest available bios is version 1.10. It is very strange, as the bios I have installed is version 1.4. It's what the real Phoenix bios and the Toshiba Diagnostic tool says. How can this be?

  Also, does anyone know if it is possible to reflash the bios with the original bios Toshiba, rather than the one Phoenix? If so, could you please tell me how?

  Thank you very much

  Hello

  I have P20 over two years, and I've never updated the BIOS so far. The device works without problem. It is not necessary to install the new BIOS just if you find that some update is available.

  You are right about the BIOS on P20. This is Phoenix one. As far as I know, it can not be exchanged with Toshiba one. If you want more information about this, contact the customer Service of your country partner.

  Please check the last BIOS update on http://www.toshiba-tro.de/subpage/bios.html

• Satellite M30-404 BIOS update problem

  Hi ppl
  I have problem with the bios update, my laptop is 1.30 bios ver and ill try updated to 1.60 worm. on windows update becauseI gift? t have traditional update disk. But do not work 4 me. Help, please? Im trying to update to 1.20 ver., reading in the manual of the BIOS, but nothing hapend.
  SRY for bad English :) ppl

  Howdi wiz4rd,

  I also have a satellite M30, and a few weeks ago I had updated my laptop to the BIOS v1.6 latest. I had no problem with the update.

  Where did you downloaded your BIOS? and what Productcode your machine? (PSM30E or other)

  CyA bob77

• Satellite Pro L300 BIOS update problem

  Hello

  I have a Satellite Pro L300 (PSLBHE).
  I downloaded the new bios and started the upgrade file. A window appears and shows the version of the old and new bios (v1.70-> v2.20). All in 1 min. my laptop computer screen turned black but the green light flashed HDD and does not what it is about 15 minutes. After that I pushed the power button and the judgment of the laptop. Now if I push the power button nothing happen just blank (black) screen and HARD drive flashing.
  What is the problem? What can I do? Please help me.

  Gjon

  It's the BIOS update is finished now. Of course, the BIOS update was interrupted and now of the BIOS chip is damaged.
  What can you do now?
  Unfortunately not much. What you need is a professional help, so I recommend you contact the closest service Toshiba and ask for help. I'm sorry.