Satellite P200-1JR doesn't do nothing - all the lights are off

Similar Questions

• HP Deskjet 6988 seems dead. Mid-page printing order, all the lights are off except the power cord light

  He won't return.  Push buttons does not help, or not pulling on the power cord to the printer, standby, restart the router & printers.  I have also connected by ethernet cable but I do not think that the connection is the problem because the printer is connected to power but will not produce lights or sounds.  It does not appear on the list of printers, and utility HP cannot detect it.   Windows Vista 32-bit, in my opinion, bought in 2007.  Is it gone forever?

  Hi Poboy,

  If the adapter has a green light to this topic, and you tried to plug it into different outlets, this would indicate that the printer may be dead. If you have tried these steps consult the following site

  http://www.HP.com/United-States/tradein/home_flash.html

• HP F2210 printer will not be closed, and all the lights are on. Tried unplugging don't, no results.

  My Hp F2210 printer will not be closed, and all the lights are on. using a compaq presario with windows xp installed. I tried to unplug the unit. Problem has not been resolved.

  I'm sorry that you are experiencing this issue. Sometimes there may be ink system failures, ink cartridges are bad, or even the printer maintenance needs.

  Here is a link that can help you with this problem.

  http://support.HP.com/us-en/document/c01430567

  Let me know if it helps.

• OfficeJet 100: All the lights are flashing, printer does not respond

  Sometimes when I print a document that contains multiple pages, pops up an error. During the print job, the printer stops work on the intermediate page (for example - second page), spits out the rest of the blank page and all the lights flashing. The printer does not any action, only a hard reset (disconnect battery). After that, he will normally for a same day behavior, and suddenly many, same error. Printer is mainly used through Bluetooth, but the same error occurs also in the cable.

  I checked almost everything I could, there is no paper jam, cartridges are placed correctly, battery is fully charged, also this page http://support.hp.com/us-en/document/c02643100, nothing helped. It's really annoying, when it arrives of the exhausts. How can I solve the problem? Any ideas? Thank you very much.

  He gets these events:

  69556: event_dirty_power_up

  69552: event_log_no_media_pick

  Hey @Mar_tin,

  Welcome to the Forums of HP Support! I hope you enjoy your stay here.

  I see that your Officejet 100 is having problems with the paper feed. I can help you with that.

  This document describes How to fix paper jams with your printer. If after completing the document, you still get paper jams, the printer will be replaced. You can contact HP support by clicking on this link and fill out the form below to discuss the options based on your warranty.

  Please let me know if this fixes the paper jams or if you have other questions. If not, have a great day!

  If this solves your problem, then please help others find this post by clicking on accept as Solution on my post.

  If you appreciate my help, so please let others know by clicking on the icon below my post thumbs up.

• the screen is black and all the lights are on do - what I do?

  When I turn it on all the lights turn on but the screen is black

  Hello

  Before you attempt this procedure, the judgment of the laptop, remove the AC adapter and then hold the power button for 20 seconds to dispel any residual charge in the motherboard - do this whenever you stop before changing/deleting modules.

  Try to remove one of the memory modules and see if the computer will start.  If it is not, move the same module to another location and try again.  If it still does not start, remove the memory module and repeat with the other to see if any combination will allow the laptop to start.

  A video and a description of how to remove the memory modules is on the link below.

  http://support.HP.com/us-en/document/c01272264

  Kind regards

  DP - K

• FS750T2 does not start, all the lights are green

  I have used 2 of these switches, both with the same problem:

  When I put in the power cord, all 48 ports lights are switched on (green).
  Nothing happens when I connect the switch to my modem.
  Is seems that nothing happens when I use the button reboot and/or delivered to factory settings button.
  All of a sudden (I'm not exactly after what I was doing) I saw a switch in the SmartWizard and 1 single port was green. It seems that the switch worked very well and I have installed the latest firmware. Everything went well, but after I took off the power cable and put it back again the same problem appaers. Now I can do what I want, nothing seems to help to restart the switch.

  Is there a certain procedure to reset to use the reset or factory or pushbuttons for reset?
  Anyone has an idea why the switch is not complete booting?

  Donkey other ideas are welcome, thanks in advance!

  JaapTon wrote:
  When I put in the power cord, all 48 ports lights are switched on (green).

  
  -If all port 48 LED steady green when nothing connected to it, then it seems to be a faulty hardware.

  JaapTon wrote:
  Nothing happens when I connect the switch to my modem.

  
  -Remember that the switch must not be connected directly to a modem only device. However, if it is a modem-router combo, then it is fine.

  JaapTon wrote:

  Is seems that nothing happens when I use the button reboot and/or delivered to factory settings button. All of a sudden (I'm not exactly after what I was doing) I saw a switch in the SmartWizard and 1 single port was green. It seems that the switch worked very well and I have installed the latest firmware. Everything went well, but after I took off the power cable and put it back again the same problem appaers. Now I can do what I want, nothing seems to help to restart the switch. Is there a certain procedure to reset to use the reset or factory or pushbuttons for reset?

  
  -Try to do a power reset. Here are the steps:

  a. press the reset button factory for 30 seconds, while the switch is on.
  (b) after 30 seconds, turn off the switch for 5 seconds but continue to press the factory reset button.
  c. after 5 seconds, the switch while you continue to press the factory reset button. Wait another 5 seconds.
  d. release the reset factory button. Check to see if it will boot completely.

• Printer 1700 stop working, all the lights on

  My Dell Printer 1700 ceased to function, and the top of the page of all the lights are lit.  Y at - it a solution that is easy, or that I need to replace the printer?

  Hello Jon,

  Please post on the forum. All the lights on the points to a failure in one of the panels of the system, if you press the button continue, you should get a secondary sequence of lights to so you get a closer outcome of the question. You can compare the lights using the guide of the user at support.Dell.com. In most cases it will be better to replace the unit than to try to fix it.

  Kind regards
  Joseph E

  #iworkfordell

• Satellite P200-1JR: display becomes suddenly empty only restart helps.

  Hello

  I have laptop Toshiba P200-1JR, and I am satisfied with the performance.

  Unfortunately, I have experienced a few problems for which I'm not sure if they are material (manufacturing) or a driver problem (software).

  1 display sometimes (maybe once a week) becomes suddenly empty. Nothing special was did not previously, which should be the trigger. Just the time. Only restart helps.
  2 same as 1, but already show just goes crazy for a few second. A few lines aside (as the magnetic interruptions) are on the screen.

  I just downloaded a bunch of driver updates (have not applied the yet), but I want to ask is this already known issue?

  Best regards
  Vladimir Stefanovic

  > The screen started flashing uncontrolled for about 15 seconds, then it becomes totally blank.

  If the display driver and BIOS update help didn t I would recommend checking the laptop in ASP in your country
  Something like this may seem very strange, or it s a hardware problem

  Good luck

• I imported bookmarks in Chrome, but all the links are bad

  I'm moving from Chrome to Mozilla to work. I have work of many associates of bookmarks. I exported the booksmarks of Chrome and put them on my desk. Then I opened organizing bookmarks on Mozilla and imported. They are there, but all the links are the same, on some BBC News site (which was not one of my favorites!) I am very frustrated and have uninstalled and reinstalled Mozilla nothing helps.

  Never mind. I fixed it.

• "All the conditions are met" - not exactly?

  Hello again! I'm experimenting a little, set up a mock up of the slightly more complicated project of Captivate to help some of my practice of co-workers with Captivate. I am under a problem but with one of my examples:

  I put a map of the world and six text entry areas to invite a user to name the continents (except Antarctica). I attributed to each box TE an associated variable where it is placed, that is the entrance area of text on Europe is associated with linked a variable titled 'in Europe. I want the slide does not advance until all mailboxes of YOU are properly labelling of each continent.

  Currently, for each main entry text box, rather than by a single shipment, a peak action occurs which assigns the associative variables with a literal name. For example, for action advanced in North America, marked NA_Check, it has an action to display a caption saying 'okay' and assign the NorthAmerica variable with a literal: "North America".

  An advanced global action runs when a user is trying to push a "Continue" button that checks the State of the variables. The conditional action because its properties 'if' that all the conditions are met with Asia = 'Asia', Africa = 'Africa', etc. of all human beings "AND". I assumed that with all of them being 'AND' they must all be true for this check properly. However, I have separate legends for the success or failure, and for some reason all I have to do is to get two correct and I can go forward as if I was 100% correct.

  I thought that maybe it had to do with the variables being assigned prematurely, so I made an action on enter which assigns each variable with "0" so that the entry in the text box would be the only way to make the correct variables. This doesn't seem to work. Any thoughts? Why only do two of the 6 conditions for success when I list all necessary?

  I'm not sure. Maybe a bug in the code of Captivate?

  I think I might rather assign some values to variables and do some calculations, and proceed only if the result is equal to a specific value.

  But that's just me... Rick

• I could not migrate .pst files outlook to thunderbird.when I tried to import the Tools tab, all the options are greyed out.

  I could not migrate .pst files outlook to thunderbird.when I tried to import the Tools tab, all the options are greyed out.

  http://KB.mozillazine.org/Import_.pst_files

• FF28 upgrade & all the addons are showing that off, even if they are enabled

  Upgrade to FF28 & addons all + userscripts show that disabled, even if they are enabled.

  I already tried to delete:
  addons. JSON
  Compatibility.ini
  Extensions.ini
  Extensions. JSON
  Extensions.SQLite

  All that done as a cause of Firefox go in a "reboot several times 50 times more than one by one and each time asked me to manually install each addon. The process took more than 5 minutes and left me very impressed by the ability of Firefox bugs.

  End result? I am still sitting with the same problem. All the addons are showing that off, when they are turned on in fact. I cannot change them, uninstalled them or install new addons.

  PS. Oh and I write of Sleipnir not Firefox because Firefox has refused to work with the buttons on this page for some reason any (yes I'm allowing scripts in NoScript)
  PPS. Oh and my old account here for some reason some refused to open a session, even though I wrote the user name and password and I tried using the user AND email for the login process. Overall, very impressed with the services of Mozilla for now. I really want to move to a different browser.
  PPP. I have over 300 tabs open in Firefox, so can't go on the road to reset, because Firefox has no way to record a session.

  Honestly, Firefox must be transportable by default. What the point of having a browser that you spent 12 months + customization with 300 + tabs open, if your Windows partition is damaged and you cannot retrieve your tabs because it is installed? I will never use the installed version of Firefox again because it is impossible to save. If I had been using portable Firefox at the time where I could have accessed my XP partition corrupted with Ubuntu live USB, back up the folder and be good to go on my new install of Windows 8. Instead I had to start from scratch. That's what you get for not using of portable software.

  This is resolved. The steps that I followed:

  1. Ignore all the Internet advice and find a way to do it myself because no one else seems to know anything about Firefox.
  2. Save the entire Firefox portable folder making it a 7zip file
  3. Disable all addons
  4. Download the latest mobile Installer
  5. Install using the portable Installer but navigate up to the existing installed cell phone directory
  6. Open portable Firefox after updating
  7. Update all addons (do not select all again)
  8. Restart Firefox
  9. Now activate the addons, then restart Firefox

  Note: installing addons now I find that I can't add using the button 'Download' for the addon, I have to copy the URL of the button, paste it in a new tab and press enter

• New itunes install. All the songs are on an external hard drive. A lot of songs do not show up in itunes, but they are in the folder on the external drive.

  This seems to be a common problem:

  Recently I had to reinstall Win 10 & then itunes. All the songs are on an external HD iTunes does not show a large number of songs that are in the folder on the external drive. I copied the .itl to the new itunes folder. I also tried holding down - from itunes shift - select a library. Any ideas how to be able to see the songs in the itunes on the hard drive folder in the itunes library?

  Thanks in advance

  Steve

  See make a library of portable split. Have you copied the correct .itl file, or should you connect an external hard disk .itl file? If you can find the correct .itl, it should have all your songs and playlists. See the empty/corrupted after upgrade/crash iTunes library when the library has been altered for the first time with the new system. If you have to start creating your new library in an iTunes folder to the root of the external drive and move all the media inside... \iTunes\iTunes Media before adding to the library.

  TT2

• on Windows pc, I don't see a folder 'My Photo Stream', I think that all the photos are in the download folder, but when remove it from there, the status is not replicated in icloud. Help, please.

  on Windows pc, I don't see a folder 'My Photo Stream', I think that all the photos are in the download folder, but when remove it from there, the status is not replicated in icloud. Help, please.

  Hi vibenas,

  If you plan to use iCloud photo library with your Windows PC, article below the setting Details link and use this feature.

  Set up and use iCloud photo library on your Windows PC
  https://support.Apple.com/en-us/HT205323

  Sincerely

• My photos aren't going to the photo gallery. All the settings are correct. iPhone 5 s

  iPhone 5s does not load the photos to photo streams. All the settings are correct.

  It loads new photos - try to take one and see if it goes to the cloud