Satellite P200-1JR: display becomes suddenly empty only restart helps.
Hello
I have laptop Toshiba P200-1JR, and I am satisfied with the performance.
Unfortunately, I have experienced a few problems for which I'm not sure if they are material (manufacturing) or a driver problem (software).
1 display sometimes (maybe once a week) becomes suddenly empty. Nothing special was did not previously, which should be the trigger. Just the time. Only restart helps.
2 same as 1, but already show just goes crazy for a few second. A few lines aside (as the magnetic interruptions) are on the screen.
I just downloaded a bunch of driver updates (have not applied the yet), but I want to ask is this already known issue?
Best regards
Vladimir Stefanovic
> The screen started flashing uncontrolled for about 15 seconds, then it becomes totally blank.
If the display driver and BIOS update help didn t I would recommend checking the laptop in ASP in your country
Something like this may seem very strange, or it s a hardware problem
Good luck
Tags: Toshiba
Similar Questions
-
Re: Satellite P200-1JR-S/PDIF is stereo only
Hello.
I have the Toshiba P200-1JR.
When I connect laptop to hollow receiver optical cable and trying to watch movies with AC3 5.1 sound, I get only a stereo sound.
1. the receiver works correctly with the PS3 and DVD player.
2. in S/PDIF options I have Setup with only 2 speakers.
Screenshot: http://img177.imageshack.us/my.php?image=soundei1.jpg
3. I have the latest audio driver from the Toshiba site.Please help me to get AC3 5.1 hollow optical cable.
Thank you.
Hello
I don't know if you will be able to watch movies with 5.1 sound AC m.
The fact is that this laptop supports the Audio Format: 24-bit (DAC, read), 16-bit (ADC, recording), stereo.
In addition, it would be very interesting to know where you found the plug S/PDIF. ?:|
To my knowledge, this laptop supports only mic and headphone jack.
The headphone jack allows you to connect a _stereo_ headphones or other devices to audio output of the external speakers. I didn't find the S/PDIF connectors.I have connected my laptop to a stereo and in my case the HiFi, equipment produces the sound 5.1 and not the sound card on laptop!
-
Satellite P200-1JR doesn't do nothing - all the lights are off
My toshiba Satellite P200-1jr someday is dead and it is like new.
All the lights are off with battery or without or with only of food.Please help me. I don't know what to do.
Thank you!
Hello
Don t think someone could help here in your case.
No lights (power led, led battery nor ac DC plug-in led) means there could be a problem of serious material maybe the motherboard is missing.If the AC adapter is defective, then the laptop must always turn on using battery power ok, this is not possible if the battery would be too empty.
So usually a technician first test adapter and should try to plug an AC adapter right in order to test this.
But to me it looks like something wrong with a motherboard :(
Of course, this is only my personal opinion... -
Install Windows 7 on Satellite P200-1JR (PSPB6E)
Hello
I have P200-1JR (PSPB6E), with pre-installed Windows Vista Home Premium.
I would try (and buy) Windows 7, but I'm not sure of drivers available for this new platform.
Has anyone tried to type of computer laptop install Windows 7 on this (or similar)? I have experiences.Thank you.
Hello
Windows 7 is not official launched and for the moment, you can install only trial version. Toshiba and other laptop manufacturers are going to start Windows 7 support when the first laptop with Windows 7 is available on the market. The same was with Vista.
For now, Toshiba doesn't offer any driver, tool or utility for Windows 7.
-
Problem USB 2.0 on Satellite P200-1JR
I bought my laptop about a month ago, and yesterday I tried to use my flash drive.
After noticing that he took too long to transfer data, I checked the usb ports in Device Manager.
It shows that I have five simple USB and two USB 2.0 host controllers.
Changing the display 'view of the connections' I realized that my 6 USB ports share three of five simple USB controllers.The laptop is supposed to offer 6-Port USB2.0... well, it doesn't.
(Also under Vista 32-bit, with 3 GB of Ram)The service guy told me to format, but this does not solve anything.
I also got BIOS 2.30...Any ideas?
Post edited by: kostas_kompostas
GMC
have you tried to reinstall the chipset drivers? You may need to check www.intel.com and download the latest chipset drivers for your machine.
Another suggestion is to check that the sites of microsoft support for USB problems since Vista is known to work intestinal and I guess that there must be something on USB to find...
Welcome them
-
Reinstall the operating system on Satellite P200-1JR
Hello!
Please help me, I need our help.
How to reinstall the system pre-installed on my laptop safely?My OS: Vista Home Premium (32 bit)
3 GB RAMThanks in advance
You can do this via recovery DVD or disk HARD recovery facility.
How it works with the installation of HARD drive recovery, you can read about
http://APS2.toshiba-tro.de/KB0/HTD1303440001R02.htmPlease note: this will work if your laptop has only factory settings. If this isn't the case, you must use the recovery DVDs. You have these recovery DVDs?
-
Re: Satellite P200-1EE - displays an error message in the windows Boot Manager
I left my laptop alone and down for a few hours and when I'm back on him shows an error message in the windows Boot Manager.
It says unable to start windows and a recent hardware or software change might be the cause. It asks me to insert my windows installation CD, and if I n t have the CD then to ring for help but unfortunately I really can t find a number at the present time.It also reads this:
File: \BOOT\BCD
Status 0xc000000f
Info: an error occurred trying to read the boot configuration data.Does anyone know how to deal with this, or this happened to anyone before?
Hello
Maybe this article can help http://support.microsoft.com/kb/927391
-
Satellite L100-109 - display sometimes very dark on restart the standby or startup mode
I have a new L100-109. When he goes to sleep, and then I restart, the screen is very dark, it is unreadable. The only way to remedy this is to re - start the PC.
This sometimes happens at startup upward as well, and I have to reboot to get back on the screen.
Does anyone have any suggestions?
Hello
Looks like the backlight of your screen will always be activated.
I don't know the reason for this, being sometimes reinstall the whole system can solve problems like this.Good bye
-
YouTube videos do not display any Visual, audio only. Help?
I just bought my computer Samsung brand new with Windows 7. I've had it for two weeks and I encountered a problem which is a big problem for me. I watch a lot of YouTube videos, and just yesterday I went on YouTube, signed into my account and just clicked on a video. The wheel of "unhooked" loading or something like that and the screen stays black, but I could hear the audio very well. The 'prescription' at the bottom of the video was also strange too: whenever I dragged my mouse back along it, all the numbers would pop up and won't go away. What makes this even more strange is that when I go to the channel of the person watching the video, it works very well. In this case for any video, signed-in or out; I also tried to restart my computer, but that no longer works.
It's really strange, and I'm not at all happy that a brand new computer is already started to act in this way. I have nothing to this fact: no viruses, download odd (all my downloads have been updated recommended by my computer and files of the school), summary Web sites, etc.
Please help, thanks.
Nevermind I got it.
If anyone else has this problem, for future reference:
Go to the channel that this video has been posted on--> make a right click on the drive--> click Settings--> uncheck "enable hardware acceleration".
Thanks for the link! Honestly, I should have done in the first place.
-
Satellite P200 - 10G screen turns white cause driver
I was gifted a Satellite P200 - 10G, works great so far, only if I try to install the graphics driver (Intel 945 G), both that of intel and Toshiba one my screen goes black on each Windows (XP, Vista, Win 7, Win 10). It works with the standard Win drivers (except Win7).
Any ideas why this is happening. And maybe a workaround?Regardings
mindscraper
If I understand the question, the laptop works properly using the standard Windows graphics driver that is part of the system and standard resolution (I guess that 800 x 600 or 1024 x 768 or something like that).
But after the installation of the driver graphics card, black laptop display changes and nothing is visible on the internal display. Right?
This happens also in the external screen/monitor?
Check it outBut to be honest, the question looks like a malfunction of the graphics card.
-
vcops-plugin displays an almost empty screen
I have vCops 5 installed and running for a week.
The Web interface works as expected.
When I use the vCenter plug-in display is almost empty - only Configuration, Notifications, help and work around.
See screenshot
Is this expected behavior?
If this no can I doNo, this is not expected
the vi-client web_plugin using the built-in IE of the operating system in "compatibility" mode
I guess you encounter some restrictions configured on EI - check your settings. Also make sure you have at least IE7
Thank you!
-
Is satellite P200 - 1C2 (PSPB6E) 64-bit Windows 7 compatible?
Hey guys,.
I got a question here:
I tried to find the drivers for my Satellite P200 PSPB6E and I found almost everything, but there is no PPV for the 64 bit version of Windows 7...
I tried the the satellite P500 series VAP and it works more or less, but the FN-Hotkey button bring up flash cards! (it's my major problem, so if I could solve this one, what follows is not so important)So my question is, is it possible that Toshiba will provide a PPV for Win 7 64 bit or is more than portable just for old and is not compatible?
Or y at - it another way to get these drivers I need for those funktions?Thank you guys!
Welcome,
RoughAs you know Windows 7 is already a lot of time on the market and if Toshiba has no Win7 64 bit stuff has offered so far I don't think it will happen in the future.
What you have done is just. You can try one last thing, find utility support Flash Cards for another laptop model and try to install it on your Satellite P200.
I'm not sure this will help, but you can try it.Also check the settings of flash cards and enable the option allow the mouse to show the cards. Perhaps this option will help you see flash cards using the mouse pointer.
-
Networking freezes completely, only restart allows
before I changed the power supply and now after that I sometimes find my network frozen (after I have unlock my computer and sign in again - maybe it is related to saving energy?) and frozen to - I mean completely unreversable frozen - network adapters are displayed (internet) to work but nothing connects and says my VPN "could not resolve host name to connect to. , I can turn my network cards but when I try to reactivate them (connect) - window "connection" just stay permanently be visible and nothing happenes (and it cannot be closed) and if I try to reboot\shutdown - I get BSOD DRIVER_POWER_STATE_FAILURE tcpip.sys + 156 B 5, I have two NICs - a built-in and one pci-e (tried to delete one - did not help) tried to open the Device Manager and refresh the - freezes up, tried to stop the service in services.msc netowrking - stop freezes and never ends (tried a few other - stopped very well services)
latest drivers for network cards, install all windows updates. I have a desktop PC under 24\7, locking (win + L) for the night.
also describes my problem here and transferred two kernerl minidumps - http://windowsforum.com/threads/networking-freezes-and-only-restart-helps-which-gives-bsod-driver_power_state_failure-tcpip-sys.190961/
* added: just happened while I was watching a movie with no locked office (win + l).
and if I turn off and turn back on the other network adapter, but when I turned off my frozen and I tried it on again - it was no longer possible for two adapters put-everything froze.
restarted, - the problem happened again in 40 minutes--did not turn off\on nothing, just restarted - netowork adapter disappeared completely from the Manager of peripherals and netoworks, refreshes did not help, only BIOS reset (battery take back out\put in) enabled, after booting in hitted refresh Device Manager and the device appeared.
Win 7 pro, latest drivers atheros, asus5k se - AMIBIOS 604 (afraid to turn the motherboard in a rock by updating)
is this simular situation: http://social.technet.microsoft.com/Forums/ru-RU/5b4c9cb8-95d2-40c2-b530-231261f3e941/-?forum=ws2008r2ru
Hello zale.
According to your description, you work on the VPN. So I recommend you announced your query in the TechNet Forums.
TechNet Forum
http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro
Hope this information helps.
-
Weird display on my Satellite P200 - 1 g 8 problem
I bought my new laptop Satellite P200 - 1 g 8. I had some problems with the display cable.
After that switch on and work for a few hours, the display is corrupted, or you can say distort.
It is very difficult to explain in words. But when I restart or switch users, it starts, works very well and then again after 1-2 hours the screen suddenly corrupts.I've updated the drivers and Vista too, but I still have this problem. This problem comes then it distorts everything on the screen gave nothing.
It is not overheating issue.If someone knows about it or anyone can help with this, thanks in advance.
Thank you
CecileHello
To be honest, it is not easy to understand exactly what is happening. All you can do is install Vista with delivered recovery DVDs. This image has been tested and it should work well. If the problem persists, it must be checked by the service.
Sorry, but I don't see another solution for you. As I have written before that it is not easy to understand exactly what is happening and what it looks like.
This occurs if you use a specific application?
-
Satellite P200 - some web pages are not displayed properly
Hello
I have a laptop Toshiba Satellite P200 with Vista home premium
I use a wireless connectionA few weeks ago that some pages on the web incorrectly displayed as e bay, face book, Amazon I did a virus check etc. no joy.
I did a diagnostic test and results said "failed test network!I looked in Device Manager and under network there is a driver called ADAPTER ISATAP on right click that says that it is working properly.
It seems that this could be the problem. Could I delete this driver and download it again?
Could someone offer advice on this subject any comments would be more usefulThank you
JezHello
Devil, please this Microsoft document http://support.microsoft.com/kb/932520
What do you think of first sentence: you can ignore this error message?
Very funny! ;) What do you think?What happens if you remove it from Device Manager and reboot your laptop?
Maybe you are looking for
-
waterfox claims to be a 64-bit version of Firefox. Is it? Is it safe?
I noticed that IE provides a 64-bit version. Looking for a 64-bit version of FF I found Waterfox. He claims that it is a 64-bit version of FF. Is it? Is it safe? Are there plans for a 64-bit version of FF?
-
HP Pavilion dv7-6c95dx: could not find bluetooth to turn it on.
I can not locate where or how to activate bluetooth for my laptop. I was told when I got the laptop that she did not have compatible Bluetooth. Little help would be greatly appreciated.
-
turn off the power of the computer during the installation of updates
I have this problem that I accidentally unplugged my pc during the installation of an update the welcome menu and now whenever I turn on my pc it freezes on the welcome menu with this same screen installation of updates on. but I see that there is th
-
Hello I have a curve 3920 v7.1.0 OS running. Back in July I kept getting messages from memory and he kept stuck so I had to uninstall applications such as Linkedin or what is App. Then I realized that I didn't have that 2 GB of memory then upgraded t
-
4.5 no longer supports Screen.makeMenuWithContext)
Hi all In my application, I want to, for most screens, to ignore the Menu key. Then in the superclass for all of my screen, I put this: {} public boolean onMenu (int instance)By default, eat the menu keyReturns false;} In subclasses where I * fact *