Satellite P200-1JY and Win7 - SDHC card can not be read

Similar Questions

• BlackBerry Smartphones Media Card can not be read question - tried several 'solutions '.

  This morning I look a some photos on my BlackBerry Pearl 8130 (carrier Verizon) and all of a sudden, when trackballing on a thumbnail and trying to open the photo, it just sort of frozen. She would not open the photo.  After a few seconds, the best hypothesis, I would say that 30 or less, it says "Media Card can not be Read. I went to the Options > Media Card and checked all my settings.

  Map of media Support - > on

  Encryption mode - > no

  -> On mass storage support

  Enable Auto-> guest

  I put the MicroSD card in the card and my laptop and he could read all the files correctly. I put on my C: drive and formatted the card in the phone. The BB gave a successful message and again, could not be Read...  I put the card (with the files back on them) in another bead and it reads the card and thin files.

  This happened only once in the past and the infamous battery pull worked. I tried 10 + times now with my phone and still no luck. Whenever I left the battery longer and longer. I am sure that is not the card, and it is not stuck in mass storage Mode, since I've not directly connected the phone to the computer with the cable from the problem.

  It seemed if strange could be viewing of a file on the card and then all of a sudden stop grateful the card. All the copper in the card slot rods are straight and not bent. The card is a SanDisk 1 GB.

  Any help would be appreciated.

  I think you're right. I had two go wrong in mine, unrelated to the BB.

  Please let us know when you get another, and we can go over the options.

  Please solve this thread and open a new one when you get the card.

  Thank you

• Smartphones blackBerry Media card can not be read or format

  I pasted in my SanDisk 4 gig card in my "BOLD" and I got a message saying media card has been inserted. When I go into options - memory, it displays a message that says:

  "media card can not be read. Check that the memory card is formatted. »

  I then try to format the card, but I get a message that reads: Media Card Format failed.

  I can read the card on my PC, but the "BOLD" just will not do anything with it except tell me when I put in or he pulled.

  Someone knows how to fix this?

  Thank you

  OMG! After spending hours reading stuff, I finally got to work.

  All I had to do was turn the phone off and remove the battery then put it back in.

  I could just kick myself!

• Satellite A300-1ed: 8 GB SDHC card does not work

  Welcome!
  I have a problem, I got an SDHC card with a capacity of 8 GB and a card reader built in, unfortunately, I don't read it. I checked the computer description, and he says that he accepts these cards. In what could be the problem?

  (Toshiba Satellite A300-1ED, PSAG4E, Windows XP)

  Hello

  Try to update the card reader driver

  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

  Try different SDHC cards

• Satellite P200-123 2 GB SD card is not recognized

  Hello

  When I put a 2 GB standard (* NOT * HCSD) SD card in the built-in player, it is not recognized, the sd card is not in the Device Manager, or anywhere.

  I updated the driver "SD Utilities" and I also tried updating Vista with a fix, but it says I already have a later version installed.

  However, the 1 GB SD cards work always in the drive?

  Any help would be much appreciated :D

  BTW, my OS is Vista 32 bit

  The 2 GB card works in other PC?

  Maybe its defective or needs formatting.

• Re: Satellite P300 with Windows7 - wireless network card can not find my BT homehub

  After istalling Windows 7 on my Satellite P300 card wireless LAN Atheros can't find my bt homehub.
  I tried to change the channel on the hub and updated to update all drivers, but still no luck.

  Any ideas anyone?

  The wireless network card is properly activated?
  This BT hub is not known to me, but check settings WLAN hub and laptop and updated on both devices to run on the standard G only.

• Satellite Pro A200, Windows XP, 4 GB SDHC card will not work.

  Hello

  I had a Satellite Pro A200 installed with Windows XP, SP2 for some time - no problem, a great piece of kit. However I have recently bought a new camera and splashed by a Kingston 4 GB SDHC card. The manual for my A200 to indicate seemes that it my laptop is compatible with SDHC 4 GB cards but when I push the card in the blue LED flashes and then nothing happens. My SDHC card does not seem to be recognized by the system.

  I see no error in the log of the events of my OS and I checked the slots operation in trying an old 512Mb SD card and works very well.

  Anyone can offer help please?

  For reference, this laptop is a PSAE4E A200 model.

  Thanks in advance

  Simon

  Try this fix XP to enable SDHC support

  http://support.Microsoft.com/kb/934428

• Satellite P200 - Product Recovery Disk 2/2 does not work

  Hello

  because my laptop (Satellite P200 - I bought in December 2007) does not work more properly - and when, after a lot of cleaning it still wasn't working properly - I decided to start from the beginning and restore the operating system with 2 product recovery cd / dvd.

  Recovery disk 1/2 worked well - Windows Vista Home Premium product is loaded again on my computer.

  But what abot * Disck2/2 product recovery? *
  At one point, the recovery program calls for a 'supplement' but when I put in the product recovery disc 2/2 at this time, that the program does not recognize the disc. During the rest of the recovery program the program didn't ask for Product Recovery Disk 2/2, so the content of this CD-ROM/dvd now is not loaded on my laptop.

  Someone had this problem too?
  What do you have on this?
  Is this a problem for not loading the content of the product recovery disc 2/2 (I can go without it?)?

  Thanks in advance for any response!

  Artisans

  Post edited by: craftsmen

  Hello

  > Products 1/2 worked well - Windows Vista Home Premium recovery disc is loaded again on my computer.

  I put t know which modules the tool called for, but AFAIK the Toshiba image contains the operating system Vista, Toshiba drivers and additional software.
  So if you've recovered the laptop using the recovery disk Toshiba 1 then the laptop must be set to the SAME State as at the first day of the purchase.

  PS: what files you can find on the second disk?

• Just found out that my intrnet provider has an imap email set up and means that I can not leave a copy of my mails on the server, correct?

  Just found out that my intrnet provider has an imap email set up and means that I can not leave a copy of my mails on the server, correct?

  Incorrect... IMAP is synchronized. So to remove a mail locally and deletes it from the server.

• Satellite L300D - 18 d - after restoration, I can not play games

  Hello

  Recently, I have restored my hardrive because I had a virus, and since then I can not play.
  Any1 can tell me what I can do?

  Thx a lot

  > Any1 can tell me what I can do?
  Yes. First give us all necessary information as
  -laptop model
  -operating system
  -the games you want to play
  -installation (Microsoft or Toshiba disk) and
  -Which means if you can t play it?

  However, try to update the graphics driver. You can find it on the Toshiba site.

• have windows 7 x 64 and hp deskjet 656c can not load the driver he keeps giving me error code 0 x 00000057 down

  have windows 7 x 64 and hp deskjet 656c can not load the driver he keeps giving me error code 0 x 00000057 down

  Hello

  Please contact the Microsoft community. We will be happy to help you with your concern.

  According to the description, you can not install hp deskjet 656c driver you get error code 0x00000057c.

  How do you try to install the driver? Is it through the disc or via the site?

  Method 1: Use a troubleshooting tool to solve the problem:

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2: temporarily Disable the Antivirus and firewall and try to install

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3: Try to install in the clean boot

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After installing windows update, follow step 3 in the link provided to return the computer to a Normal startupmode.

  Please follow these recommended steps, review the additional information provided and post back if you still have the problem. I will be happy to provide you with additional options.

• Adobe muse working on a menu lighbox and need help I can not the box of active relaxation, even if I checked trigger on top

  Adobe muse work on a menu lighbox and need help I can not the box of active relaxation, even if I checked trigger on top anyone with a suggestion?

  Thank you, it ends up being a superposition problem, thank you, but I can see where an invisible element could be a problem too. I use to select it all the trick to understand where I've been in Illustrator all time years ago I am so new Muse that I kept thinking can be as simple as I can go back to things I've done in other Adobe programs, but it is! and I'm an old school Print Designer who doesn't REALLY know the thing no coding thank once again

• Hello, I have problems with Creative Cloud Packager. I bought this product yesterday and since then I can not download completely all components. 59% or 65% of the download I get the message: "connect to the internet and try again." I am connected to Inte

  Hello, I have problems with Creative Cloud Packager. I bought this product yesterday and since then I can not download completely all components. 59% or 65% of the download I get the message: "connect to the internet and try again." I am connected to the internet through Ethernet, I checked my connections through various steps recommended buy Adobe to see if my connection is correct and he is!, so why I can't complete the download process. I feel frustrated because I have clients awaiting results of my work that I can do right now. I have read all the information on the Adobe pages but nothing shows that can help solve my problem also the way things are described sometimes seem complicated and exotic as; not everything I understand particularly when it comes to some technical descriptions or abbreviations. I would be grateful someone help and advice on this topic. Thank you Nina

  Hi Nina,

  This link might help: cloud creative activation and troubleshooting of sign-in

  Kind regards

  Sheena

• CS5 I get "and FTP error produced - can not connect to the host."

  CS5 I get "and FTP error produced - can not connect to the host." Your login or password is incorrect. Please check your login information. I work with three sites. One of them connects fine, but two of them get this message - and I am well aware that the user name and password are correct on each of them. Can anyone help?

  Call your host.

  Nancy O.

• Can be upgraded the firmware on my Satellite Pro A120 to accept SDHC cards

  I have a Satellite Pro A120 and use the slot for SD card frequently, however, the capacity of memory cards can sometimes be restrictive, is it possible to update the firmware for SDHC cards and if so, how.

  Hello

  Unfortunately not possible since it s card reader has NO firmware and it s a stand-alone device that has nothing to do with the BIOS (firmware) of the machine.

  So, if she can't simply do not support. :/

  See you soon