Satellite P200: How install only Vista using Toshiba Recovery Disc

Similar Questions

• After upgrade to Windows 7 can I use Toshiba recovery disc creator?

  Hello

  I just upgraded my Toshiba Satellite L550-130 from Vista to Windows 7. The Toshiba recovery disc creator, which is always installed also works for Windows 7?
  Then, I'll go and buy some blank DVDs...

  Thank you and grettings,
  Toni

  Hey mate,

  I doubt it will work. I mean, after the installation of Windows 7, there is not image files that you can burn on the recovery disk. So it does not work in my opinon.

  If n t believe you, just try and post your results here! Blank DVD is really cheap ;)

• having the 1935 error code and can not install windows vista from my recovery disc

  I have a recurring error when trying to install all programs (Error 1935).

  and have reinstalled windows using my vista full 23 bits and when installing any program, even a basic program I get the error code 1935. I have a recovery disk, but I don't know how to start to charge and use the recovery disc supplied with my PC
  can someone help please because I am a beginner

  Thank you very much
  Dave

  Each manufacturer is different things about the recovery partition.  You need to contact the computer manufacturer (online - they can publish procedures - or by telephone) for instructions on how to use the recovery disk (there are probably a combination of special keys at boot that activates the process).  Keep in mind that this type of resettlement will completely eliminate your primary system partition, so don't forget to backup your important data until you try it.

  Here is an article on the 1935 error and solution to fix it.  Maybe this will help (he has a little advanced, but so is the problem then do your best to fight the operating instructions).  http://blogs.msdn.com/astebner/archive/2004/11/10/255346.aspx.

  I hope this helps.

  Good luck! Lorien - MCSA/MCSE/network + / A +.

• Satellite L300 Windows 7 to Vista with Toshiba Recovery CD

  Hi all

  I have a Toshiba Satellite L300 Series (2008 model) cell, which was originally Vista but I installed Windows 7 Professional on this topic. I would now like to go back to Vista.

  I noticed that the "Windows.old" folder created on the c: / drive appears to be missing a lot of files and could have been modified since the date of that its creation. I think it would be too risky to use it to recover back to Vista.

  So my question is can I use my original Toshiba Recovery DVD set to return to Vista? I want to do a full factory reset to restore my system when it was purchased with Vista.

  If the recovery DVDs is not an option and was the only is by using the Windows.old folder, if it is missing important files so she could leave my corrupt system? I don't know there is a way to get back to Vista by restoring factory somehow.

  Comments and reactions to urgent!

  Thanks in advance.

  > So my question is can I use my original Toshiba Recovery DVD set to return to Vista?
  Without a doubt. Only using original recovery disks you will have factory settings again.

• Satellite L300 - can't reinstall Vista using the recovery disk

  My daughters Satellite L300 gave problems that seem to be hard disk errors.
  I installed a new hard drive and tried to reinstall vista from the recovery of the product CD.
  Partitions are created successfully and then I get an error "C:\program files\adobe\acrobat restoration...". several times followed by etc

  "image restoration of error."

  "The file or directory is corrupted and unreadable."

  "Imagex error not to VISTA F:\06235XSP.svm Index 2 odd c:\!

  "Press a key to continue."

  And thye ned.

  All ideas

  Hello

  Hmm, looks like the laptop cannot restore the operating system from the recovery image
  To be honest I'm not very well why this error pops up but eventually it s m related to the new HARD drive installation.

  Perhaps, you can format the HARD drive again using a clean Microsoft Windows CD (Win XP, etc.).
  Boot from the CD of Win and format the HARD drive.
  Then go to the recovery disk, boot from the recovery disc and try reinstalling the operating system

  Maybe it would work

• NB200-10Z: can't make the drive recovery using TOSHIBA Recovery Disc Creator

  Hi people,

  Finally got round to buying a USB DVD drive to create a recovery disc for my NB200-10Z. I received the following:

  * Samsung SE-S084C, external USB 2.0 Slimline 8 X DVD writer, black

  I tried twice to create a recovery disk and now find myself with two trashed DVD. The error in the error window codes are:

  Error code: 0E01B5-26 - 2A 040803
  Error code: 02016F-3 c-00000000

  The first time that the fire has been stopped, the second time of the verification failed.

  Anyone can shed some light on this?

  Hey mate,

  The disks that you use to create a recovery disk?
  I had a similar issue that he wasn t possible to create the recovery so media I bought Virgin s manufacturing another DVD (Verbatim DVD-R) and it worked!

  It seems that DVD - R media works well instead of DVD + R
  It s worth a try!

• Portege R500: Cannot restore Vista using Toshiba recovery disks

  I downgraded Vista to XP loaded factory.
  However, I would now like to restore back to Vista.

  I have disc 1 & 2 ' product Recovery DVD-Rom; Portege R500 disks.
  They are also marked "Windows Vista Business (SSD/PATA)" has been provided by Toshiba.

  I don't know how to use these discs to restore my operating system to Windows Vista. When I insert disc 1 and after loading some files, a message "cannot read the file source or disk - Preinst2.SWM" and I can not go any further.

  An instruction step by step would be greatly appreciated

  I wonder why you receive two recovery disks. As far as I know Toshiba Vista Recovery image is stored on a DVD.
  Perhaps you have received two CD

  In any case, have you tried to boot from the second disk? I mean the second recovery CD?

  Usually, recovery is not very sensitive. You must boot from the disc and should follow the instructions on the screen.

  The error cannot read from the source file or disk - Preinst2.SWM looks like a little to the Conference on disarmament would not readable or the CD/DVD drive would not read the disc properly.

• Satellite A300 - after installing the Vista SP1 no longer start

  Hello

  I brought my Satellite A300 friends tonight to upgrade Vista to Windows 7.

  The disc of Windows 7 told me before he could upgrade the Vista would need a service pack 1, so I started to install the service pack and when he went to restart mode then it spent in step 2 restart and all of a sudden the screen went black and a load of a number appeared and it goes no further the system frozed.

  Problem now is that Windows does not start and it will not work in safe mode and I'm afraid that all my friends photo and files are now gone.

  I'm empty!

  Can anyone help?

  Hello

  Now, what happens if you try to start Windows? You get an error message or something else?

  Normally before you install something like a Service Pack or Windows 7 you must back up all the files first and this must be done at any time normally ;)
  I think you can only recover data if you put the HARD drive into an external HARD drive enclosure. Then, you can save the data on another computer.

  After that, you can do a clean Windows 7 or alternative facility. install Vista using Toshiba recovery disc, then Windows 7.

  Welcome them

• Satellite A300-1EG - why do I need 2 recovery discs?

  Hello
  I have a Toshiba Satellite A300 - 1EG.

  I created 2 discs recovey such as required in the "Toshiba disc Creator Recovey". I created the premiera (disc 1) 2 weeks ago and the second (disk 2) today because I didn't have 2 DVD in hand.

  My first question is t - it is important if I left a period of time between the two creations that will affect the recovery if I ever need to use them?

  My second question is to make two just recovery disks recover the operating system for example: Windows Vista or they recover what was recorded on the Local C drive, at the time they were created?

  My last question is if that happens my dies of an operating system, I make just to turn on the laptop and put it in recovey disc 1, then 2, (if this isn't how someone can you please tell me how to?)

  Concerning

  Hello

  When you use Toshiba Recovery Disc Creator you can see there the option for the use of different blank media. On some laptops, that image can be burned to a blank DVD and on some models, you need two of them. It depends on the recovery image.

  For my Satellite A300, I used both DVD-R virgins. I created images of recovery for several laptops, and we don't have me break creation of recovery and continue later. When the first media is finished you need to place the second piece of blank media and burning process will continue automatically. As far as I know that there is NO option for creating discs 2 only. Please be careful about this.

  I recommend you to get two empty DVD - R blank and create DVDs from recovery at the same time.

  When you use recovery DVD is removed from the entire HARD disk, not only partition C. This means that all the data saved on the HARD disk will be deleted. If your laptop has two HARD drives the recovery procedure will affect only HDD1. Be careful about this, and before you begin the recovery procedure back up all your important data.

  Follow a definitive answer to the final question ;) when you want to install the OS by using recovery media:
  Power your laptop running and press F12 to display the boot options
  Put the 1 recovery media in the optical disc drive
  In boot options, choose the CD/DVD drive and press ENTER
  Follow the menu on the screen

  Of course, start with DVD1 and questioned insert second DVD.

• Cannot start my TOSHIBA Recovery Disc Creator

  I have laptop Satellite A300-148
  Since I bought I tried to create a recovery disk to format my laptop, but every time I try to open 'TOSHIBA Recovery Disc Creator' this message appears on my face:
  ERROR: "(5) to C:\Program Toshiba Toshiba Recovery Disc Creator\Setenv.ini were denied access."
  What should I do?

  Hello

  I don't know what the problem is here, but the only thing you can try is to install the operating system with recovery image in the hope after the new installation of OS, that this tool will not work correctly.

  The recovery image is recorded on the second partition of HARD drive and to start the recovery installation press F8 after starting your laptop. In advanced startup options, select the first option to fix my computer. When the system recovery options are shown, please choose the last option in recovery Toshiba. After doing this just follow the on-screen menu.

  When the operating system is installed, try using Toshiba Recovery Disc Creator. I recommend you use high quality DVD-R media.

• Satellite P200 pspb6 - Downgrade from Vista to XP - how to proceed?

  First of all sorry for the mistake I'm french.

  I want to downgrade my laptop, a satellite P200 pspb6 of windows vista to xp.
  I put in the CD ISO of xp sp3. I changed the boot order to put the cd drive first.

  But after that it doesn't work, my operating system windows vista itself lunch without taking into account the boot order.
  It's the same thing when I try to install Linux Ubuntu.

  However, when I put the CD in the system restore Toshiba giving it works.

  could someone help me?

  Hello

  For me it sounds a little like the CD/DVD drive didn't read the disc.
  Have you tried to use a MS Windows XP CD?
  You can install Win XP using this disc?

  Just a hint; the needs of P200 a installation of additional SATA drivers this means that the drivers SATA (places in the Intel Storage Manager) must be installed using a USB FDD drive or you could use a software free nLite that would allows allows you to create a new disk Win XP with SATA drivers.

• Satellite A300 - how to recover Vista after installing XP?

  Hello

  I'm sorry but these problem I have copy of partition (d: winre) and intended (e hddrecovery) now I need to know how I can recover?

  The original operating system with the laptop is Vista and I'm trying to install XP so that I change the size of the partition. Please help me to know how the original recovery system?
  Notes: No there are no no action when I press f12 or f8 in XP but in the last time. I found repair Windows and new Vista recovery

  Thank you

  Hello

  After installing another OS, you can retrieve only Vista if you start from the Toshiba Recovery disk and install the content. There is no disk HARD recovery option more, it means that the HARD drive recovery partition will not help you.
  In addition the Windows RE partition has nothing to do with Toshiba, it s a Vista feature.

  Then boot from the Toshiba recovery disc and will respond to factory settings! ;)

• Re: Satellite P200: how to move from SATA to install XP - Dual OS

  Can you please tel me how you got past the sata issue in installing xp?

  I want vista dual boot / vista but don't have toshiba recovery disc.

  Thank you

  Hi guys

  In this forum thread you will find a nice workaround how to do a dual boot. Win XP and Vista.

  http://forums.computers.Toshiba-Europe.com/forums//thread.jspa?MessageID=146500

  Personally, I followed the guide published by Chad and it worked!

• Satellite A350D - 20K - need Toshiba Recovery Disc Creator for Win7

  Guys I'm on Satellite A350D - 20K

  before or the original operating system from my laptop has been * Win Vista 32 bit * but I have choose changed from * Win7 64 bit *...
  I have already downloaded the other drivers from this site for my new OS, but it is not complete, in any case, this isn't a big deal.

  I just want to have an installer for * Toshiba Recovery Disc Creator for win7 64 bit *.
  before on my win7 32 bit there is a Toshiba Recovery Disc Creator ("but it doesn't have an installer on my backup CD I do not know why?")

  I looked for an installer here but the only thing I saw was for Win Vista, I tried to install it luckily it has been done successfully. He invited s to restart, so I restart my laptop so I tried to open the application, but there was an error message that invites it goes like this

  "NO HDD RECOVERY AREA!
  "The Toshiba Recovery disc can not be started."

  CONCERNS:

  * I want to ask you guys if you have an idea why it goes like that?
  * You have an idea where I can get the good installer for my new OS

  Please GUYS I NEED YOUR URGENT help BECAUSE I want TO SAVE FIRST MY drive HARD BEFORE I'll install new applications or before so I will use it.

  Thank you good guys...

  Hello

  Toshiba Recovery Disc Creator is a tool of Toshiba that created the recovery disk available on HARD drive recovery image.
  It s NOT support tool like Ghost, etc. that allows you to create an image of your operating system preinstalled.
  If the Toshiba Recovery files are not available on the HARD drive then the Toshiba Recovery Disc Creator will not work!

  Welcome them

• Satellite A300: TRDC reminder & Toshiba Recovery Disc Creator works after upgrade to Windows 7?

  Hello

  I'm sorry for the bad English.
  Satellite A300.
  Has performed the update to Win7 upgrade Toshiba program.

  This program works;
  TRDC reminder and Toshiba Recovery Disc Creator after update to Wins7?

  The TRDCReminder program found no "revival of the computer.
  Toshiba Recovery Disc Creator program was created and incomprehensible?

  If what these program how to recover your computer in case of failure?
  TEMPRO works in Win7?

  Thank you very much.
  With greetings.

  Igor.

  Hello Igor

  In my opinion, you must create recovery disk before upgrade you to Win7. I did the same thing.
  Later, if something goes wrong, you can use your disks and install Vista using the created recovery disks.

  I don't understand why you want to wait and create these disks after upgrade. This recovery creator disc doesn t create recovery image in the current state, but always the same recovery image, you got with your laptop.

  TEMPRO should work in Win7 too.