Satellite P200 PSPBGU: how to use the bluetooth?

Similar Questions

• Satellite P300-133 - how to use the internet connection via BlueTooth

  Hello

  I finally solve my problem with the synchronization via bluetooth between my P300-133 and my [HTC | http://www.htc.com/europe/product.aspx?id=15674] with Windows Mobile 5 - with step by step instructions of Toshiba.

  But I don't know how to use the Internet via BT, I tried many ways, one of them was to create a PAN with P300 as server - correctly connected HTC to P300, but it seams I can share internet with P300 as a gateway. And I want to do the opposite - get internet from my mobile to the computer (while she is away from all the cables). I'm not sure this PAN in the right way...

  The question of the other and less important is to be able to share that connection with your laptop via bluetooth - I guess that this must be done through Pan

  Thanks for any help.

  Bartek

  You found a solution to this?

• Satellite Pro U200 - how to activate the bluetooth connection

  How to activate the bluetooth connection?

  Hello

  First check to see if your computer supports BT
  If the laptop supports BT, then you should find a BT tag at the bottom of the unit.
  If there is no label then your machine was not equipped with internal BT module!

  If the laptop supports BT, then use the FN + F8 key to go to the BT
  Then BT should start installation and configuration.

  For more details, see this forum and this Toshiba BT Portal:
  http://APS2.toshiba-tro.de/Bluetooth/?page=FAQ

• Satellite L500-1WG - how to use the modem internal?

  I am new to computers and laptops and that you just bought the Toshiba Satellite L500-1WG. I was told, in the shop, he has an internal modem?

  What should I do to activiate/get connected to the internet? Do I need an external modem wired or wireless as well? No difficult language or abbreviations please, I am a total novice with very limited on this subject knowledge. Have only to learn how to start and run the basic set up.

  HEY buddy,

  > Told me, in the shop, he has an internal modem?
  It seems that this shop doesn't know what they are selling or they wanted kid a small round little

  It turns out satellite L500 is not equipped with modem and it doesn t have a modem (RJ12) port.

  So if you want to use the modem connection, you must purchase an external. But for now he s not advised to use a modem, the majority of the pages are not designed for modem more.

• Satellite - WIi 8 - How to use the SD card

  Windows 8 on Toshiba Satellite.
  I do not know how to connect my sd card

  I pop my card to build in reader and now what?
  Nothing happened and I don't know where to find the answer.

  Perhaps you could provide some i.e more details:
  What model of laptop do you have exactly?
  Have you changed anything in the configuration of the system?
  Do you use the Windows system preinstalled by Toshiba?

  Usually, if you insert the compatible! SD card in the SD card slot, after little time the SD card should be recognized by the system and should be visible in windows Explorer

• Satellite L450-12W - how to use the folder HDDrecovery?

  Hello

  I need to get this L450, but its owner did not get it back dvd.

  The system does not start, and he said:
  + BOOTMGR is missing.
  Press ctrl + alt + delete to restart +.

  I noticed the hard drive of 320 is divided into three partitions:
  first of all, hidden, SYSTEM, 400MiB, with the diag + flag +, and there's the Startup Manager (+ bootmgr, BOOTSECT. BAK+ and the folder + start +) and a folder called recovery + where there is a subfolder called + WindowsRE + which contains + winRE.wim +.
  second is WINDOWS, 149GiB, with the flag + start +; This is the operating system.
  in third place is given, 148GiB, no flag. Here's a folder called HDDRecovery size 6.4GiB and a folder called + MONICA-TOSH + where there are a lot of backups that I don't know how to use.

  Then, I tried to follow the manual, which know to press the 0 (zero) key when starting to start the recovery from the hard disk, but it did not work, no screen appears and the error message appears again.

  What should I do?

  Thanks, and sorry for my English, I'm Italian.

  EDIT: I forgot to say that I also tried to fix the problem with the Windows7 DVD repair tools, but he did not find any operating system with a Linux Live, I see that all the system files are in the WINDOWS partition!

  Hey Buddy,

  The HDDrecovery usable only if you are able to access the Windows Advanced Boot menu. There is an option called fix my computer which will start the Toshiba HDDrecovery.
  I put t know what the user manual you have, but AFAIK press zero will not work. You must press the F8 key to access the advanced boot menu.
  It work?

  If not, there is nothing you can do I think wait Toshiba Recovery disk Windows reinstallation. This will restore the preinstalled settings of Toshiba. If you n t have this disc, you can order it here:
  https://backupmedia.Toshiba.EU/landing.aspx

  Alternative you can use a Microsoft Windows disk to reinstall Windows. After that, you have all the drivers and tools from Toshiba Web site.

• Satellite L300-215 - how to use the Draft N Wlan

  Hi guys...

  I have a toshiba Satellite L300-215, who has a card Intel wifi link 5100 AGN.
  I am connected to my wireless router BELKIN N1 at a speed of only 54 Mbps...

  Is someone can please tell me what I have on my wireless card to fix uses n parameters Project installation of my laptop?...

  your

  Hello

  Your router must support the project in order to connect to the laptop using Draft N.
  In your Wlan Draft N router settings must be enabled.

  In-WLan card-> properties > Device Manager, you can find the Advanced tab.
  You will find many different parameters. Here, you have to choose 802.11 N (Draft N).

  Generally if the two option would YOU then you might be able to use the Draft N

• Satellite L350D-213 - how to use the WLAN?

  My mother & father has bought a laptop last week and are having problems with the connection to the sky broadband. Sky Broadband is a netgear router, which has wireless capability.

  My question is how does broadband on your laptop? They need to get a wireless dongle to use, my experience with laptops is minimal.

  Any help much appreciated.

  Hey Buddy,

  I think you should read the user manual. There you can find all the necessary information using the laptop.

  To use the WLAN functionality, you must enable this feature using the WLAN hardware switch on the laptop and the FN + F8 key combination. Check it!

  If the WIFI is enabled, check the configuration of TCP/IP. It s according to your router if you use DHCP or a static IP address.
  In addition you must disable management feature in the management of WLAN power supply.

• Satellite L500-14N - how to configure the Bluetooth device?

  I can't set up Bluetooth device. I don't know my computer who bluetooch crutch.
  Please help me.

  Thank you!

  Hello

  Are you sure that your laptop is equipped with Bluetooth?

  I even checked the specs on the Toshiba page and it seems that Satellite L500-14N isn t equipped with Bluetooth and so you can configure it.

  Sorry, mate, but your laptop doesn't have Bluetooth.

• Satellite A100-192: how to use the s-video output?

  My A100-192 out s-video. Can I use it to watch DVD on screen? What is needs? Can be no problem - simple connect laptop with TV and relax. Or problems?

  Hello

  Generally all the information on how to connect laptop to TV, you should find in the manual of Toshiba which is already preinstalled on the laptop.

  The laptop supports a switch for easy display on television.
  By using the FN + F5 key combination, you can switch between display devices.
  Therefore, you must connect the laptop with the s-video cable to the TV, turn on the s-video on your TV and the FN + F5 to change the TV screen output.

  If you want to watch DVDs, you must use a DVD as WinDVD playback software.

• Satellite U300-153: how to use the resolution to 720 p on TV

  I have laptop satellite u300-153 and a HD ready LCD Tv.
  I have the connected with vga cable, because the laptop has vga output.

  The problem is that when I change the output resolution in the Setup menu of the graphics card to a larger than 1024 x 768 resolution, television reports an error of non-signal.

  I searched this forum and found that it's because the resolutions on the one I mentioned earlier are locked in Bios of the Government.
  I would use a normal on my HDTV 720 p resolution, because I intend to use it as my main screen at home.

  Using the 720 p resolution is not required, I would be just as satisfied if I could use any other wide screen resolutions.

  Hmm. I think that the problem is you graphics driver doesn't support external resolution of 720 p (1280 x 720).

  Unfortunately, if this resolution is not included in the graphics driver, then you will not be able to use it :(

  That's pity

• Satellite A45-S250: how to use the recovery CD if the DVD player does not work

  Hi all
  First of all, apologize for my English, I'm french :)

  So my problem is that I would like to re - install everything on an A45-S250 using the recovery CD.
  But the main problem is that the internal DVD player no longer exists.

  I try plugging in an external DVD drive, but the laptop won't start on it.

  I have seen that it can start with a disk, lan or SD card drive. But with opportunities of theses, how power reinstall everything include in the recovery CD?

  I may have a usb floppy drive, so I'll be able to boot from a bootable disk. but then how to start the process of recovery CD?
  I will prefer to use the recovery as a home standart WinXP CD, because I know that the OEM series will not work in an original version of Windows XP...

  Thanks for your help!

  Kubs

  Hello Kubs

  I see only one solution: you have to somehow use external DVD player and make it visible to your laptop. I try didn t, but I guess you need to start your laptop using WXP startdisc and load the MS-DOS driver for external device.
  If you will have success to access external hard drive I guess that you will be able to start the recovery procedure.

• Satellite A105-S4384 - how to use the s-video port

  What is the way to use a s-video cord to connect my 4384 to use the TV as a display?

  I use Linux Ubuntu 8.04... Thank you

  Hello

  Usually, you don t need no work around special to make the connection with the external TV.
  You must connect the laptop with the TV using the s-video cable.

  Please note that the s-video channel must be enabled on your TV.
  Then change the video output in the properties of the graphics card.

  Using a Windows operating system, you would be able to switch to the external TV by pressing the FN + F5 keys, but as much as I know about Linux OS this function will not work.

  Welcome them

• Satellite A100-233 - how to use the multimedia buttons in Linux

  Hello!

  I used to use media keys and ALTLinux on Toshiba Satellite A100-233 (who, under the power button)... Its possible? If so, how?

  PS: Sorry for my bad English... If you can answer on Russian... =)

  Hello

  Hmm these buttons belongs to a characteristic of Toshiba and this function needs special drivers of Toshiba.
  Unfortunately, there is no drivers for Linux distributions and that's why I put t think you will get these buttons work after installing Linux.

  See you soon

• Satellite P200-1EE - how to replace the keyboard

  Ive just bought a replacement for my P200-1EE keyboard, I have an idea but how to replace, anyone know?

  Hello

  The keyboard is fixed with four screws that are hidden under the cover of the thin plastic strip above the buttons of the F1 to F12 keys keyboard.
  You may need to remove this plastic cover to gain access to the screws.
  But you must be careful because it could break.

  The keyboard is connected to the motherboard with a flat cable.
  First disconnect in order to remove the keyboard.

  But note; If your warranty is valid you should not try this because it might void the warranty.