Color LaserJet CM1312nfi MFP that gives the message 'unexpected paper size ".

Similar Questions

• I can't delete a game called Float that gives the message waiting. The cross and the oscillation with delete option appear, but it won't when I select Remove. Any ideas please?

  I have a new mini iPad 4. I can't delete a game called Float that gives the message waiting. The cross and the oscillation with delete option appear, but it won't when I select Remove. I don't know how it came to be. Any ideas please? Thank you.

  First try a reset to see if it finishes downloading. Press and hold the home and power buttons until the Apple logo appears. Release the two buttons. Wait until the iPad tour starts on its own.

  Check if you can remove the application. If not go into settings > general > use iCloud and storage > storage > storage management. Wait for the list of apps to open. See if the float is on the list. If it is delete it from there.

• Muse gives the message "unexpected error I-200.

  Muse gives the message "unexpected error I-200. I had downloaded 7 beta of Muse, but he would not accept one of my passwords. I uninstalled Muse CC and tried the beta version, but still have the error I-200. I got the same message after I tried to reinstall Muse CC.

  Y at - it ay problem with execution of the beta and the CC version on the same system? They had worked before.

  Hi Olivier,.

  Until I received your message I searched and found a note just to get rid of the opm.db file in this folder and it took care it. Thanks anyway.

  Oh, and is there a way to make the thumbnails for the image which is presented in a slide show? We try to edit a great show and it is difficult to find where you look at the thumbnails because nothing is highlighted.

  Thanks again,

  David

• Color Laserjet M476dw MFP: page in the nonpaged area 'failure' BSOD when you install the latest driver for M476dw

  I just bought a Color Laserjet MFP M476dw for use on my wireless network.

  I downloaded the latest version of the suite of the HP driver: LJPro-MFP-M476-Full-Solution-13302

  for my Windows 8.1 operating system / 64 - bit and listed as version: 10.0.13302.320 - September 25, 2014

  I was connected with a local administrator for the installation level account

  I started installation, the printer was discovered and s/w install went fine until she gets to the point of print test page test page printed but that page was printing the computer locked with his (first) Disconnections:

  "failure of page in the nonpaged area".

  I turned off, restarted and after the connection got an error message that says:

  «The HP printer and Alerts State met and error and can not recover... Please restart...»

  Windows version: Win32NT 6.2.9200.0

  HP printer status and alerts version: 070.040.00169

  I rebooted again and got the same error...

  I started the uninstall program with the hope of just uninstall the printer status s/w and then put it back.

  but the uninstall program seems to have uninstalled the entire suite of s/w...

  Before going to this one more time, I thought that I would like to ask for suggestions...

  I've owned this phone for 6 months, and it was Cap... it's the first BSOD I did...

  Thanks for any help!

  I wanted to just close this thread:

  I was out of town for a week, but just returned and recalled to HP support.

  The technician did a large manual cleaning of the pilot has failed on my machine.

  and ran two different installers cleaning MSI Windows then with temporarily disabled antivirus s/w

  (which I had also done during initial Setup) we re-installed and everything seems to work.

• New Color LaserJet Pro 200 MFP M276n gives the message "printer is off-line.

  Hi, I have install and use this printer last week, no problem with printing.  Today it tells me that the printer is offline, and documents to sit in the queue without printing.  I am running Windows 7 on the laptop and the printer is connected via a USB cable. It is an office of a person, so I'm the only user of the computer and the printer.  Any suggestions?

  Thanks for your comments.  I ended up ringing the help desk.  I think that print driver software had been corrupted, as it started printing when we tried to re - charge print drivers.  Hope that this kind of thing does not happen too often.  Too much stress!

• HP Color LaserJet CM1312nfi MFP does not print, but will copy

  Copies, scans, faxes fine, but when I print the pages are blank. I get messages of ERROR of no..

  When I have access to the pages of menu to perform tasks that includes a print, the pages are blank.

  It recognizes all the cartridges and copy very well.

  Hello mikev9359,

  I understand your concerns. Unfortunately, for this type of printer, I need you to lead our Enterprise Business Community Forums. It will be the right section for this problem. Good luck.

• C309G. Will not feed photo paper and give the message of paper jam.

  Using 8.5 x 11 photo paper that he will feed not and I get a message that there is a paper jam.  I can then turns off the printer and it will be by himself through the paper and eject it.  If he he'll come when I close it took off why it won't pick it up and print.  I cleaned all rollers with distilled water.  I had the printer a couple of years and it has always worked well.  It is a new problem that has just begun.  Nothing has changed.

  I sent the steps to your Forums HP box.  Let me know how it goes.

  Good luck!

• HP Color Laserjet M277n MFP: How to use the black cartridges only when the color toners are empty

  Hello team HP,

  I recently bought a HP Color Laserjet MFP M277n I printer I print black & white user only and really don't need color prints. How to set the printer options to print only black & white? How can I replace only the black cartridge when the color cartridges are empty? How many prints (approximate), we can take by toner?

  Kind regards

  Christèle

  Hi @Pavumba,

  Welcome to the Forums of HP Support!

  I understand you're wondering how to use black ink only on your HP Color Laserjet M277n MFP printer. I would be glad to help and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I see that you wonder if you need to replace the color cartridge when it is low. This printer is a printer AIO, therefore, you need to replace the ink cartridge when it becomes too weak to be able to resume printing. However, if you print mostly in black, you can configure a preset black only to print in black and white. This would help reduce the use of the color cartridges.

  NOTE: Composite black - for black and white images and photos, a mix of colors called 'composite black' can be used to achieve the quality significantly improved picture and soft gray tones that can be achieved with only black toner. For users who want to print images using just black toner, many HP printers color customer offer configurable options allowing the client to print using only black toner. For example, by selecting "print in grayscale" in the printer driver Specifies print using black ink only. For more information about the use of the toner cartridges, please see this article: how the Toner is used.

   

• HP color laserjet cm2320nf mfp (ff3be2) can be networked with the USB wireless adapter?

  Howdy, first post here - rules of noob.  Search for as well as I could but have not seen this answered.  Recently, we changed the place of our home network router.  We cannot reach our hp color laserjet cm2320nf mfp (ff3be2) Ethernet cable not more.  You ask if we give a wireless (Wifi, no bluetooth) to USB adapter to the USB port of the printer, will be the printer network through it?  Sure it works on computers, but don't know if the printer will look network via the USB port.  In any case, the problem we are trying to solve becomes the printer on our network of origin when we can not connect it via Ethernet.  Thanks in advance.

  Thanks for the reply.  Yes, I thought that I understood that after doing some more than browse the Internet.  Just ordered the Ethernet of IOGEAR Universal for adapter Wi - Fi N.  Hoping that the printer will think it is plugged.  Should do based on what I've read.  Thank you, James.

• LaserJet CM1312nfi MFP * MISSING a COLOR *.

  LaserJet CM1312nfi MFP is installed on windows xp professional 2002.  bought, installed on 30-11-08.  It will print not blue, or all the shades of blue.  As it is not there or not turn off.  No error messages well.  Not sure how long his current summer. (6 MB.?) tried the new cart., cleaning, calibration and all that.  Driver update I tried but have no idea what I'm looking for or if its good.  I want to here something clogged not leave level ink, but not ready to rock right now.  Help!

  The product you have seems to be a printer. For the best chance of finding a solution, I would post in the HP Business Support forum!

  You will find the Board Commercial Laserjet here.
  http://h30499.www3.HP.com/T5/printers-LaserJet/BD-p/BSC-413

  I hope this helps!

• HP Color LaserJet M277n MFP: HP Color LaserJet MFP M277n CONNECTED to THE NETWORK, SHOWS NO INTERNET CONNECTION

  HP Color LaserJet M277n MFP printer, is connected to the network and I am able to print and scan. During the attempt to get the HP Web Enable services in the Web services configuration page, it displays an error: "connection error, check the internet connection".

  After you enter the IP address of the printer in the browser, I am able to detect the printer. To enable printing of HP, but unable to do so finds out the above error. Tried a lot of things including re editing of. When I check the printer, it shows the proxy settings are required / incorrect, where, as confirmed by the supplier that they use the proxy server.

  Help, please.

  Hello @JljoThomas!

  Thanks for posting and welcome to the Forums of HP!

  I understand that you have a problem of activation of the functionality of web services on your MFP HP LaserJet Pro M277n. I'd love to help you with this.

  First of all, you have the printer connected directly to a wall outlet or is a surge protector or power bar? Even if you have used a surge protector/power bar this whole time and you feel that this is not the case, please connect to a wall outlet so that we can eliminate the source of energy as the primary cause. Issues when connected to an uninterruptible power supply/Strip/surge protector power
  In this document you will see, QUESTION: questions or problems may arise when a HP LaserJet printer is connected to a UPS (UPS), a power strip or a surge protector
  ↑ This is not limited to the Laserjet printers.

  If this does not resolve the issue, we are going to let the router and unplug the power cable (NOTE: do not reset the router...), then do the same with the printer and shut down the computer. After a minute, plug in the router, wait to fully turn on, then plug the printer back in and wait for the wireless light become solid. Once the router and the printer are on, go ahead and re - turn on the computer. This will refresh the network connection.

  If you are still unable to connect to web services after trying these steps, we can try to set a manual DNS server of your printer to connect to.

  On the front panel of the printer, press the wireless icon. Select it wireless TO get the wireless summary. Do not your IP address.

  1. on your computer, open a Web browser and enter the IP address of the printer in the address bar. This will bring up the embedded Web server (EWS) page.

  2. at the top of the page, select Networking.

  3. in the left side, select Identification network.

  4. in article for DNS, under primary (IPv4) enter 8.8.8.8, under secondary (IPv4) enter 8.8.4.4.

  5. Select Apply at the bottom of the screen.

  6. try to activate the web services again.

  If it is still unable to connect, try to enter 209.244.0.3 for the primary (IPv4) and 209.244.0.4 for secondary (IPv4)

  Hope this helps!

  

• HP Color Laserjet M476dw MFP: Of memory error on the HP Color Laserjet M476dw MFP printer

  Help please,

  I have a printer of HP Color laserjet M476dw MFP, its connected wireless to my computer mac laptop and it was working fine but suddenly today it appers error low memory which is strange, the file size is not more than 400 Ko, a simple solution to get red of this message pleassssssssssssssssss.

  I removed the printer and he added once again, the name of the printer seems to be good and show connected.

  Thank you.

  Shahid

  No, I did not change the toner, but I found the solution.

  This solution worked for me and my printer works now. You also try MAC OS.

  Remove the printer in printers and Scanners.
  Click on the button +, select the Protocol IP on top, type the address IPv4 of the printer, select Jet Direct below and then apply.

  Good luck

• Try to install and give the message that it does not support the BONES - and it says unsupported windows vista and we have windows 7

  Try to install and give the message that it does not support the BONES - and it says unsupported windows vista and we have windows 7

  Try to force the lightroom Installer to run in Windows 7 mode:

  Right-click on the Setup file and select Properties option.

  Then click on the Compatibility tab.

  The value of the Windows 7 operating system and check.

• HP Color LaserJet M477fnw MFP: Scan to computer button disappeared

  Hello, I saw similar comments of the same issue, but none with a solution.  The closest is this: http://h30434.www3.hp.com/t5/LaserJet-Printing/How-to-fix-missing-quot-scan-to-computer-quot-touchsc...

  Problem: We have a new printer that we have Setup.  During the installation process, on the touch screen, provided the message to "Scan to Computer".  We used the option to make sure it worked and took part in the computer we wanted.  We restarted the printer, and the option is now missing!  The option "Scan to Computer" has completely disappeared.  Where it was once a touchscreen button / option, no longer exists.

  Printer: HP Color LaserJet M477fnw MFP

  OS: Mac OS X 10.8.xx

  I downloaded the firmware update, but that doesn't work either.  I tried using the verification of updates of the touch screen of the printer, it can never connect.  I connected to the internet, I connected directly on a hard line, still no connection.  I literally just bought this printer yesterday, with a 2-year service plan, drove an hour to the next closest store that had it in stock and it gives me nothing else problems.

  I have unplugged and waited a minute.

  I've uninstalled and reinstalled the printer and the software from my computer.

  I'm out of ideas.

  Hello @gfrd3489

  If you talked about scanning to the icon post from work or option after pressing the icon of the scan on the printer itself that one has been dropped by HP since she had so many questions with that like on some devices will only scan flat and not of ADF.

  If you notice you still have other options such as scanning to USB key, scan to e-mail or scan in network on the printer folder of are next to the HP scanning app on the PC for windows and mac

  Devices most recent are not supposed to have this option on the first place and the firmware and normal updates which will remove devices more alumni who have it

  There were a few M477 which were sold to vendors when it first came out which was which, but as soon as he gets the first update will be deleted

  hope that clarifies the question

• HP Color LaserJet M476nw MFP: Scanner reported an error - HP Color LaserJet M476nw MFP

  I had problems with the HP scanning software.  When I run the software and try to initialize a scan, I get the message

  =====

  Scan reported an error

  HP Color LaserJet M476nw MFP is currently unavailable. Please check if it is connected and turned on, or try again later.

  =====

  In fact, the scanner works fine, like I can scan documents directly to the USB port on the printer.  The scanner has worked in the past with the HP software on my computer, but now just won't work.  The printer is also properly connected to the computer as I have no problem with printing of documents.

  No idea how to fix this?

  Thank you!

  Hello

  Try to install the following package to make sure that your drivers are perfectly up-to-date:

  https://support.Apple.com/kb/DL907?locale=en_US

  Then restart your Mac and try to scan the image.

  If the same persisnts open the JSCA-Packard folder and move the HP scanning application to the trash.

  Then install the HP Easy Scan app instead (which is the latest version of HP scanning):

  https://iTunes.Apple.com/us/app/HP-easy-scan/id967004861?MT=12

  Now try scanning using the application and check for the difference.

  Please let me know the results,

  Shlomi