Satellite P30/P35 - not run from power or charge

Similar Questions

• Satellite U500 - may not wake from sleep

  Hi all

  I have a Satellite U500 laptop win7 64 bit and my system may not wake from sleep mode.
  "Standby mode" when I press the power button or any key of the keypad power led lights up but the screen stays black and the system is unusable.

  Any help?

  Have you noticed this problem in the first moments after upgrade to Win7?
  I assume that you made a mistake with Vista?

  Have you noticed the same behavior when you use hibernation mode?

• Satellite P30 will not start, but shows the power on LED and fans work

  I work on a P30, radiator cleaned, the basic form of new fine thermal compounds, worked for a few hours, then turned it off and move the power LED lights, fans, cd rom works, but it is she, no display, no boot, nothing.

  Any ideas on how to solve this problem would be a great help.

  Plug

  P30
  P4 3.2 ht
  1 gig of ram, tested.
  XP pro

  Hello

  On this path, it is not easy to say what can be the problem and just inquiry may help, but from your description, I'm afraid that there are some critical material damage. It may be something wrong with the power supply (motherboard) or perhaps is the grilled CPU if you have done something wrong with the thermal paste.

  Sorry, but I think you should contact the partner customer Service in your country and check it properly.

• Satellite A200 - will not start with power supply connected

  My lapop is 2 years old. Whist trying to boot it restarts at least 2 times and I am running Windows 7.

  My old battery lasts about 20 minutes so I bought a new and the first time that I loaded up it gave me an hour of a time value of battery, but on the second cooldown it has provided for 20 minutes.

  It does not always to the top while the power is connected do you think that my motherboard is defective =.

  Hello

  Normally, if you connect the laptop AC adapter shouldn't t stop. Everything should work correctly as the system even starts the battery would be defective.

  So, I think you already wrote that the motherboard is faulty. In this case I recommend to contact an authorized service provider. Technicians can order a new mainboard and Exchange! :)

• Satellite C650 will not run recovery

  Hi, hope I can be helped here,

  I have a satellite C650-166, there lack of battery while doing a windows update standard, now he used to re boot. I fear not the laptop to factory settings, to rest that I intended to do anyway.

  I followed the instructions on the screen to run the Startup Repair tool, but whenever I do this it loads its files, then goes to a black screen with just the cursor.

  I tried the, hold 0 way to fix and I just get the same thing every time, I hit the 'repair your computer' then it does not make the system recovery options...

  I am using an external monitor, but I don't see what is the problem that I wouldn't be able to see the cursor... surely?

  Any help is appreciated and thanks in advance

  In general the document recovery disk image installation works as described in follow - http://aps2.toshiba-tro.de/kb0/HTD1303440001R02.htm
  So please try with F8 at startup. Not working?

  By the way: I assume that you did not create recovery media, right?

• Satellite A200-12s - not boot from the CD/DVD drive

  Hello

  My Satellite A200-12 s does not start on CDDVD. It is well recognized in the bios. In the trunk is first CDDVD. Under Windows, it works perfectly.

  Thank you for your help
  Thanks to Google translation.

  BIOS Version 2.60 64bits

  Hi michel_91,

  If the drive works properly in Windows, it seems to be related to your startup disk. I put t know which drive you are trying to boot from, but you should try another. Maybe it s scratched or something else in order to test another.

  Check this box!

• Satellite A30 will not run on sector, only on the battery

  My Satellite A30 battery recharges the AC adapter when the laptop is turned off, but when I turn on, the laptop runs only the battery and no power outlet. I get a green light indicating that the AC adapter is plugged in but no battery light. The symbol power tells me that it is on the power supply (Full Power Mode). Sounds like something horrible inside.

  Any ideas?

  Hi Suze

  What happens when you remove the battery and you try to start your laptop using only the AC adapter?

• Satellite A60 - do not start after power supply fault!

  Hello

  I know it's a long shot, but here's the situation!
  I had a Toshiba Satellite A60 PSA60E for repair.

  He had the power plug inserted into the back of the case of the break taking, damaging U4 and hit 3 resistors.

  I have now replaced the socket, transplanted the resitors counsel doner and welded in a new IC (U4).

  Now when I turn on I get the LED illuminating as expected (Inc. that blue on the power button) but nothing on the screen, no fan, no disk buzzing etc away.

  Ideally, I would like to try subing cpu etc but don't have any alternative to play with.

  If any ideas whatelse could be wrong on that?

  Not sure I want to risk the cost of a new motherboard (that they is availible) or that it would be interesting to the replacement of the machine.

  Look forward to some good advice
  Thanks Jon

  Hi Jon

  Unfortunately, I n t think that someone here in the forum will give you a precise answer and provide the solution it seems that it s a motherboard problem.
  As you know that the computer motherboards are complex parts with many electronic details.
  It of impossible to say what could be the problem on the Board without any detailed controls.

  To my knowledge, card repair mother is not so easy and expensive so you should not pay for the repairs, but buy a new Board of Directors which is covered by the warranty or second hand board which is much cheaper

• Satellite P50t-did not functions - no power

  Hello

  I have a Toshiba satellite P50t-a.
  I used it normally, and I left it for 1-2 hours.

  When I came back, the power light on the front of the base was on, a d the charge light was on, but the screen was turned off and the ring around the power button was not lit as usual.

  I unplugged it, and the charging light remained on / is always on, and the power led.
  I tried: hold the power button, leaving him alone for an hour, CTRL-ALT-DEL and opening and closing the lid.
  The reference is PSPMHA-0DP04S.

  Pictures: http://imgur.com/kRSGQwm

  Thanks in advance,
  Mr. Dave

  Hello

  At the bottom of the unit there is a 'hole' to force shutdown.
  http://APS2.toshiba-tro.de/KB0/TSB3C03JR0000R01.htm

  Please check if using this hole allows you to reset the unit.

• Satellite C650D is not booting from the CD

  My mother has a Toshiba Satellite C650D and password protect the hard disk. She forgot the HARD drive password today! I want to format the drive and reinstall Windows. I changed the boot sequence in the BIOS to boot from the CD drive and I like it start I press F12, but it goes directly to the HARD drive password screen. I change the setting to prevent fast boot but still no change.

  The only way I can boot from the CD is to remove the HARD drive.

  Are there any other settings that I can change to make it boot from the CD?

  I'm afraid there is nothing you can do about Mr. check please follow the documents:
  http://APS2.toshiba-tro.de/KB0/FAQ9401AR0000R01.htm
  http://APS2.toshiba-tro.de/KB0/FAQ9202JG0000R01.htm
  http://APS2.toshiba-tro.de/KB0/TSB6B01MC000CR01.htm

• Satellite Pro U300 not wakeup from hibernation opening lid - drums

  When my laptop was new, a prolonged Sessen could be restarted by opening the cover. During this time, this feature is reduced in this case, external power supply is plugged.

  If I use only internal battery power, my computer laptop doen't start until IAppuyez I/O-switch. Is this normal? Can I fix?

  Hello

  Hmm I m not very well but my laptop doesn't wake up after hibernation, open the lid, even using the AC adapter.
  I always press the switch in the order of reactivation after hibernation

• Satellite A100 - signal not supported from PC to TV

  Hello

  I have a Satellite A100-SK8 I used to connect it to my Sony 40v2500 using a cable of AVG. However, recently it will no longer connect and I get the mesaage "signal not supported set the output to your pc" on the TV. I use the same cable to connect my another PC to the same TV and it works correctly.

  Any help is very appreciated!

  Thank you
  Shain_20

  Hi shain_20,

  Can you explain which is an AVG cable? I've never heard of this

  In any case, he s strange that he doesn t work then you change some parameters of display or any other driver/software driver?

  Maybe reinstall the display driver could help...
  Usually, you can switch between monitors using the FN + F5 key combination.

• Satellite M40 does not start from hard disk - read error

  "I push the button - briefly see the In Touch with tomorrow TOSHIBA screen - then ' + a disk read error occurred press Ctrl Alt Del to restart +".

  I control alt delete brings me briefly on the screen TOSHIBA where I can choose either F2 or F12.

  Do I need a startup disk and where can I get one in order to boot from the CD ROM?
  Do I try to get into the Satellite M40 product Recovery DVD-ROM - this concern for me as the hard drive will be reformatted and all data will be lost.

  I'm stuck please help!

  Hello!

  If you enter the product recovery disc, Windows will be relocated and will be erasing all data on the HARD drive.

  I think that your HARD drive is damaged. You can check this with the Drive Fitness Test. Here you can download:
  http://www.HitachiGST.com/HDD/support/download.htm#DFT
  Download the CD image, burn it to a CD and boot from it. Then you can test the HARD drive.
  On the same site is a user's guide if you want to know more.

  By the way: you can save the data on the HARD drive, when you put it in a box external HARD disk. Then you can save the data on another PC, if the HARD drive is ok and have no errors.

  Good bye

• Satellite L750 - does not wake from sleep mode

  Hello

  I just bought a Satellite L750 and he didn't wake up from sleep mode. I force with button stop / stop each time in switching mode 'sleep'.

  Any ideas?

  Are you using the original pre-installed OS that you got with your laptop?
  Have you noticed the same problem with the hibernation mode?

  Did you install additional software?

• PowerCLI script does not run from the SRM command line

  Hello

  Even if I put the Unrestricted PowerShell execution policy, when I try to run a script from a command line step added in SRM, the script is run. The newspaper of SRM, I find:

  [#2] dynamicType = < unset >

  [#2] faultCause = (vmodl. NULL in MethodFault),

  [#2] result = {(dr.secondary.CalloutResult)

  [#2] dynamicType = < unset >

  [#2] commandLine = "c:\windows\system32\cmd.exe /c C:\Source_code_VMware\Scripts\redirect.bat C:\CACINTEL\Source_code_VMware\Scripts\DRSrules_TEST.ps1."

  out of [#2] = 'file C:\Source_code_VMware\Scripts\DRSrules_TEST.ps1 cannot be loaded.

  [#2] because the execution of scripts is disabled on this system. Please see "get - he.

  "[#2] lp about_signing" for more details.

  [#2] On line: 1 char: 2

  [#2] + & < < < < "C:\\Source_code_VMware\\Scripts\\DRSrules_TEST.ps1".

  [#2] + CategoryInfo: NotSpecified: (:)) [], PSSecurityException)

  [#2] + FullyQualifiedErrorId: RuntimeException

  [#2]

  [#2] ",

  [#2] returnValue = 1,

  [#2]    },

  [#2] msg = ","

  Once more, the execution policy is set to unrestricted:

  [vSphere PowerCLI] C:\Program Files (x 86) \VMware\Infrastructure\vSphere PowerCLI > Get-ExecutionPolicy-list

  Scope ExecutionPolicy
  -----                                               ---------------
  MachinePolicy Undefined
  UserPolicy Undefined
  Undefined process
  Undefined CurrentUser
  Unrestricted LocalMachine

  Of course, the command works fine if I run it manually from a command prompt.

  Any idea?

  Thank you in advance

  Make sure that add you in the 32-bit version of PowerShell, MRS. uses PowerShell to 32-bit host.

  It is the one that always gets me!