Satellite A30 will not run on sector, only on the battery

My Satellite A30 battery recharges the AC adapter when the laptop is turned off, but when I turn on, the laptop runs only the battery and no power outlet. I get a green light indicating that the AC adapter is plugged in but no battery light. The symbol power tells me that it is on the power supply (Full Power Mode). Sounds like something horrible inside.

Any ideas?

Hi Suze

What happens when you remove the battery and you try to start your laptop using only the AC adapter?

Tags: Toshiba

Similar Questions

  • Satellite C660D - 10 d will not start unless I have remove the battery and reinsert

    Present a strange problem that I can't solve.

    Brand new, open all laptop worked perfectly.

    Turned off normally and left it overnight with the power supply connected.

    Next day morning pushed the button market / stop the portable green power on but light did not start.

    Press and hold the button for 10 seconds does nothing.

    I remove the battery for 10 seconds and put again and then you press the power button and you get a full boot up normally.

    Everything on it works perfectly, you can restart the laptop without problem, you can even turn off then turn on half an hour later with no problems.

    This problem occurs only when it is off and that the power is plugged in for several hours.

    Back to toshiba warranty, I've attached a note explaining the problem and even returned what he locked up so he wouldn't turn until they removed the battery.

    10 days later they returned it saying that the intensively checked the laptop and found no abnormalities.

    I plugged the battery and pressed the power button / stop and the same question once again outside of this period, that the fan runs for 2 seconds then turns off, I removed and re inserted the battery about 15 times before it started normally.

    Last night went out as normal and this morning the question of the standard of don't turn is not on at all.

    Just to clarify him when the power supply is left connected overnight or for several hours so that the system is power off the laptop does not start, the Green led lights, no fans spin, no sign of life. One way to start is to remove the battery for 10 seconds.

    I've been on toshiba again and said that if I return it a second time and they can't find a fault that I would have to pay £80 for it returned. I recorded the fault to prove that they is a fault but they seem not interested in that.

    Up to now, the bios has been updated, reinstalled windows, I can't replace drive HARD or RAM that the warranty will be voided. However issue and im 90% that this is a motherboard.

    All the ideas that I'm completely stuck on this one!

    Sorry to hear you I have a problem with your laptop.
    Problem you have is certainly hardware related issue and it should be solved by Toshiba.
    In my opinion you should not spend money for new parts, trying to solve this problem.

    Laptop warranty valid and should be set the laptop for free.

  • Satellite C650 will not run recovery

    Hi, hope I can be helped here,

    I have a satellite C650-166, there lack of battery while doing a windows update standard, now he used to re boot. I fear not the laptop to factory settings, to rest that I intended to do anyway.

    I followed the instructions on the screen to run the Startup Repair tool, but whenever I do this it loads its files, then goes to a black screen with just the cursor.

    I tried the, hold 0 way to fix and I just get the same thing every time, I hit the 'repair your computer' then it does not make the system recovery options...

    I am using an external monitor, but I don't see what is the problem that I wouldn't be able to see the cursor... surely?

    Any help is appreciated and thanks in advance

    In general the document recovery disk image installation works as described in follow - http://aps2.toshiba-tro.de/kb0/HTD1303440001R02.htm
    So please try with F8 at startup. Not working?

    By the way: I assume that you did not create recovery media, right?

  • Satellite L300D will not recognize USB drive, except if the WIFI is disabled

    I have a venerable L300D Satellite under Vista SP2. I also have a Fujitsu 40 GB SATA HDD of my old laptop in a USB2.0 caddy, with double USB plugs to require more current.

    I can sign in successfully caddy USB to my laptop Windows 7 via a simple USB port on a USB 2.0 so I know it works.

    On the Satellite L300D, it implements the Generic USB drive in Device Manager, but does not record the 2 disk partitions in the storage of files in Windows Explorer. In fact when you try and expand the COMPUTER in the Explorer it times out.

    I noticed that the WLAN (Realtek TL8187B) is on the same USB 2.0 controller, so I disabled it. It turned off my wireless, but immediately the Windows Explorer was shot in life and I could access partitions (D:, and G :) may even run the check disk (no failures) and Defrag. As soon as I turn ON the WLAN driver disc fails to register.

    I've updated the Realtek drivers on the Toshiba web site but I want a solution that allows me to use the disc AND the WIFI network at the same time.

    Someone at - it ideas?

    Hello Colin

    Have you started using your laptop with the original version of Vista that you got with your laptop?

    I use Toshiba laptops for a long time now but I've never noticed this issue although I use external hard drives and USB keys quite often.
    Since when did you notice this kind of behavior? To be honest, I can't imagine that this problem persists since the day where we as original recovery image is tested and something like that should not happen. Maybe some updates may be responsible for this.

    Trying to remove driver WLAN, reinstall the chipset driver and reinstall WLAN driver. After doing this test he has once again please and send feedback.

  • Purchase Apple Store app will not run. It keeps freezing at the top. Help please what I do

    I bought an app and the application will not run. It keeps freezing at the top. He asks me on a plus to enter info Apple then he said I bought it but will not open the app

    Delete the app first, only then it re-download again.

    If not, try these standard troubleshooting steps.

    Reset: hold the Home and Power buttons until you see the Apple logo (10 to 20 seconds).

    If this does not help, you may need to restore your iPhone.

    https://support.Apple.com/en-us/HT204184

    If your backup in iTunes, make sure that it is an encrypted backup.

  • Satellite A30 - does not start after the RAM to level

    Hello

    I recently installed a crucial for memory
    my laptop, which is a Toshiba Satellite A30. However, when I try and
    restart the laptop, he tries to restart the fan turns on then turns off with a beep sound and this is not
    even to get to the Toshiba start screen.

    The memory I installed is 1 GB, 200-pin SO-DIMM, 128 X 64, DDR 333, CL2.5, part number CT12864X335.

    "Memory module PC2700 DDR 1 GB, 200-pin SODIMM

    CT12864X335

    * Size of the module: * 1 GB
    * Package: * 200-pin SODIMM
    * Function: * DDR PC2700
    ' * Features: * DDR PC2700 • CL = 2.5 • unbuffered • NON-ECC DDR333 2.5V • • • 128Meg x 64 •.

    I have
    took out and put back the old memory and the laptop boots
    normally and is OK, I even tried to put the memory in different
    slot machines, but it still has the same problem.

    This suggests that memory is faulty, as bought crucial memory must be compatible with my laptop?

    Thanks for your time,

    You have this problem if you use modules or only the new module?

    If you only use the new module, the case is clear. The new module is defective or is not compatible with the laptop.
    I think you should get back on the computer dealer and request a new. Maybe you can get a Kingston module because I have only good experience with this production.

    If you use both modules, they are not compatible. You should only use the modules with the same specifications.

  • Satellite A100 - will not charge the battery

    Hello

    I have ned to help. My Satellite A100 will not charge the battery. He works the power adaptor for the led indicates charging status, battery shows 1% of loading tatus information, but none does change - no loading any time. When disconnected everything just stops off like normal desktop.

    I've already put battery in and out, made upgrades to the antivir software, makes Toshiba controls, tests, but what ever he did did not any change. If there is no way for restoration of battery how to check what the problem is I have no second battery or AC I can always buy new batttery but I don't know if the old one is broken and weather new would work properly?

    Best regards
    pawelg

    Hi pawelg,

    I agree with the user above. The battery can be charged only up to 500 times, and after that, it must be replaced. I think it's the case now, I mean that everything works correctly on the AC adapter so I think that the battery must be the reason for this.

    By the way: you can buy a new battery to an authorized service provider. ;)

  • Satellite P200D - will not read the Memory Stick Pro duo adapter

    Kia Ora
    My Satellite P200 will not read my Memory Stick Pro Duo adapter, both brand Sony.

    I am running Vista Home Premium. SD cards are read OK.
    The adapter works fine in my PC running XP Home premium. I tried two cards different pro duo. Help, please!

    Hello

    I think you should consult your user manual because this type of card is not supported:
    + Memory Stick Duo/PRO Duo and Memory Stick adapter are not compatible with the multiple digital media card slot. Do not insert the Memory Stick Duo/PRO Duo into the slot. Data lost or damaged if you use one card other than those supported. +

    Do you have more questions? ;)

  • Satellite A40 will not start or start the BIOS

    Hello

    I have a portable Satellite A40 2 days ago decided to turns off while I was on the internet, and now it does not restart. I tried removing the battery and leave overnight, but it still will not start. When give you it power outlet, the AC LED is green and if you press the button power turns on the green power light, but that's all, the HARD drive light does not illuminate, the fan does not come on, no sound from the HARD drive and nothing on the screen, not even the backlight. You can also feel the heatsink gets hot (without excess however)

    If you insert a CD, you can here read the disc, and find things out there, too, now the power button still cut off the laptop.

    If anyone has any advice on what may be the cause, or any way I can get the machine to reboot again, that would be greatly appreciated.

    Hello

    Have you tried to connect the laptop to the external monitor to check if pictures or anything else appears on the second monitor?

    Your description sounds like the malfunctioning of the internal display, but it is only a suggestion and a few trials are required to obtain a diagnosis right.

  • How do I run a script only if the field is not empty

    How do I run a script only if the field is not empty

    Well well, thanks to you, I had a full date on separate days, the months and the years in different areas. But now, I have a problem, as PDF has several fields calculated with script if you enter the date calculated by all other areas, which have separated and undefinied gives me does not want to put this to not always use this field. I tried to put one conditional if else but I sale. Esto, this is what I'm wearing

    var datesol = event.value;//declaramos the variable

    If (datesol = "") {}

    this.getField('yearsol').value = "";

    this.getField('monthsol').value = "";

    this.getField('daysol').value = ""}

    else {}

    var array_datesol = datesol.split("/"); / / separamos esa con date the split funcio

    this.getField('yearsol').value = array_datesol [2];

    this.getField('monthsol').value = array_datesol [1];

    this.getField('daysol').value = array_datesol [0];

    With what they do not separate them now.

    Help please

    As mentioned, you cannot use

    If (datesol = "")

    because that sets the value of datesol to «» (you will need to double for the comparison operator =)

    If you want to run code only if it is NOT empty, while it takes:

    If (datesol <> "")

  • Satellite L670D will not be upgraded to 6 GB to 8 GB of RAM

    When I got my L670 I upgraded the RAM 6 GB by adding a module of 4 GB to 2 GB provided. Everything worked fine for a year., but now I want to spend the 8 GB maximum. I bought another 4 GB module to replace the 2 GB.

    However, the machine does not even the BIOS unless the 2 GB module is in the first Bay. It will run as a 6 GB machine with a module of 4 GB and as a 2 GB machine, but will not accept 4 GB modules in the first Bay or two 4 GB of all modules.

    Anyone got any ideas on this subject?

    With RAM modules compatible everything should work ok.
    Do you use 4 GB compatible modules?

    Plese post model mobile exact (L670D-xxx). I just want to check what part number has compatible 4 GB Ram for your laptop.

  • Satellite L300 will not let me connect

    My Satellite L300 will not let me connect unless I'm in safe mode and when I go to advanced options it just comes up with a blue screen

    Help!

    Who knows what's the problem here?
    Maybe you should install new OS. You can enter boot options using F8 at startup?

    Repair my computer option is available?

  • Re: Satellite U300 will not start

    The machine has failed at a conference while using only the word and not on any network.

    Now the machine will not start orrepair and even the recovery disk will not work. He gets to the part where he asked for the language and then freezes on the next screen. I ran a disc hard diagnosis progam which reports no errors but I don't know enough about such things.

    The drive light flashed hard and I can hear the work of the reader, but nothing happens.

    Help, please

    Hello!

    It's strange, but in your case I would try to format the HARD drive before using the recovery disk.
    There, you can use the Microsoft Windows XP disk or another tool that allows you to format the HARD drive.

    If you have formatted the drive HARD try again with the Toshiba recovery disc.

    Good bye

  • Windows Update locks upwards and will not run.

    Windows update on my family Vista premium sp2 will not run.  has not run since February 5.  uninstalled all updates since 01/01/2010 but no help.  reinstalled IE8 too, but no help.

    sfself,

    Please post with the information requested here: what to post in the Windows Update forum
    Start with these troubleshooting steps and post returns with the requested info and arises from the troubleshooting.

    Clean boot your PC, and then run Windows Update.

    Reset the Windows Update components

    Perform operations of KB883825

    Mike - Engineer Support Microsoft Answers
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Apple iTunes will not run.

    Apple iTunes will not run.  I reinstalled several times. The error message has something to do with DEP.  But I doubt that iTunes referred to system memory.  In addition, my PC has hardware DEP, no software.

    Thank you.  Found the answer in the Apple community.  I had to reinstall Quicktime in order to get iTunes to run.  They had lost their association.  Everything works now.

Maybe you are looking for

  • How to reopen a window that I closed

    I closed a window in the 4.0.7 compressor how do I open it again?   while I have all the windows

  • Satellite L20 - 120 - recovery takes too long

    I'm not sure, if I take the right recovery DVDs - I got it from my client. I have a DVD "GMR400864GR0", Windows XP Prof, 2008. After restoration, remove the DVD, first start XP - execution of the VBI for more than 2 hours (said I should not stop)-is

  • ActiveX - Get a reference to the control

    Hi all I need raise a value change event in a VI ActiveX of LabVIEW interface. To do this, I think that I need to retrieve the reference to the control and then use the (signalling) Value property of this control.  Does anyone have any idea on how I

  • Turned off my computer during a factory restore

    I have an Acer Aspire One 532 h-2588. I was restore to factory condition when I accidentally turned off. Now, it will not be open. I tried to re - restore it, but it does not work.

  • All default card rejected SDCard

    The SD card reader rejects all the different cards (SD 256 MB, SDHC 8 GB SHDC Micro 32 GB), I tried to insert the message that the card is defect. Formatting with the tool TPT does not help. Also reformat the card on FAT32 on my Win7 PC did not help.