PowerCLI script does not run from the SRM command line

Similar Questions

• void VI does not run with the main VI.

  My main and sub VI is attatched.

  danil33 wrote:

  Re: void / VI does not run with the main VI.

  When you start your main program, the Subvi is called and the main VI must wait the Subvi before it can continue. However, the Subvi is not set to open the Panel before, so very probably that it runs in the background for 100 seconds (1000 iteration to 100ms), because no one can press the stop button at the beginning to put an end to the Subvi. Once the Subvi is completed, the last value is returned to the main VI via the output connector and the main VI can process and display this last value. At this point, the main VI stops, because it's done (hopefully you do not "continuous operation").

  Obviously you have some misconceptions of beginners on the stream. Please we tell exactly what you expect the program to do, and we might be able to point in the right direction.

• My C50 - B Satellite does not start from the HARD drive

  Details of the machine: -.

  Model number: PSCMLA-03F07Q
  Serial number: XE343127P

  Computer does not start from hard drive. No error message, just the start Toshiba at the end of self-test screen.

  Sometimes a reinstall of the operating system seems to correct the problem, but then he would go again, now the problem is consistent.

  I reduced the possibilities to a fault of BIOS, reasons.

  System boots from USB with no problems. Installation of operating systems is done without error. SMART hard drive data indicates a perfectly healthy hard drive. Memcheck will return no error.

  The obvious solution is to reload the BIOS, just reset it doesn't help. But that is the problem.

  1.4 BIOS update that the Australian site offers is a Windows program and the computer cannot start Windows.

  Obvious answer is to use a bootable USB key with an operating system 'live' on this issue, but all of these systems are Linux and the update of the BIOS is a Windows program. So much for smart solutions.

  Downloaded Bios version 1.7 of the European site but the iso inside the rar file is empty, 25 MB in size but nothing in there according to Linux. Tried to run his program on a Win7 64 bit computer and it returns an error that it could not find the correct iso file.

  I submitted a support request by email to Toshiba, but they believe that it could take three days to get a response, so I thought I would ask here as well. Can someone tell me please to a working copy of the latest BIOS update disk for a laptop Satelite C50 - B? Note: this model does not have a CD player so iso should be compatible with USB boot.

  See you soon,.

  Andrew.

  Hello

  From my experience that I n think that BIOS update is the final solution for you. When you set the default settings of the BIOS disk HARD appears correctly in the BIOS settings?
  HARD drive is also offered and listed as boot device when you enter in the start using F12 at startup menu?

  What happens when you start using recovery image installation created recovery USB key (I hope that you have created a)?

  Offer BIOS updates are versions of WIN and can be performed by running the Windows operating system.

• Program does not run in the emulator.

  Hello, I develop in Netbeans, version 7, I use J2ME and this the first time that I try to compile an application for BlackBerry, I download all the framework I need to develop an application for BlackBerry, I'm trying to run my program and the emulator of the BlackBerry beginning but my program does not run, I have no exception and any error, please if anyone can help me Thanks in advance.

  You can publish detailed information for we can help you as your code runs only not, what your average frame, etc...

• Where can get newspaper of reason behind Manager jaxws soap does not run during the webservice call in weblogic 11 g

  Hi guys,.

  http://docs.Oracle.com/CD/E23943_01/Web.1111/e13734/handlers.htm#WSADV189

  I created SOAP manage by top surround URL and deployment artifacts are generated with build.xml.

  I don't know why managers do not run in the web service call in weblogic 11 g.

  Regarding

  Siddharth Singh

  Solution

  Ant was not generating little class and manager xml file

  I manually copy these files

  Maybe Ant was not generating these files because of this warning

  [jwsc] WARNING: types of annotations without Transformers: [javax.xml.bind.annotation.XmlRootElement, javax.xml.bind.annotation.XmlAccessorType, javax.xml.bind.annotation.XmlType, javax.xml.bind.annota

  n.XmlElement]

  [jwsc] 1 WARNING

  Full journal of ants

  D:\SOAP_JMS>Ant f ant - build - jhand.xml
  BuildFile: Ant - build - jhand.xml
  Trying to replace the old definition of the task clientgen

  Build-service4:
  [jwsc] TJ: processing module/om/sai/buddh/SaiWebService
  [jwsc] The analysis of source files
  [jwsc] The analysis of source files
  [jwsc] 1 TJS files processing for the module/om/sai/buddh/SaiWebService
  [jwsc] TJ: D:\Oracle-ESB-RND\EncrpytionDecriptionWS\src\om\sai\buddh\SaiWebService.java valid.
  [jwsc] Treatment of the web services JAX - WS 1...
  [jwsc] WARNING: types of annotations without Transformers: [javax.xml.bind.annotation.XmlRootElement, javax.xml.bind.annotat
  tion. XmlElement]
  [jwsc] 1 WARNING
  [jwsc] Compilation of 5 source files for C:\Users\si244339\AppData\Local\Temp\_y1j0ng
  [jwsc] Building jar: D:\SOAP_JMS\outputnew\AAJAXHandlerSai1EarResponseQ\om\sai\buddh\SaiWebService.war
  [jwsc] Created JWS deployment outputFile: D:\SOAP_JMS\outputnew\AAJAXHandlerSai1EarResponseQ\om\sai\buddh\SaiWebServic
  [jwsc] [EarFile] Application file: D:\SOAP_JMS\outputnew\AAJAXHandlerSai1EarResponseQ\META-INF\application.xml
  [AntUtil.deleteDir] remove directory C:\Users\si244339\AppData\Local\Temp\_y1j0ng

  BUILD SUCCESSFULLY

• VBScript does not run in the Windows 7 Task Scheduler 'execute if user connected or not' is checked.

  I'm trying to run a vbs file using a batch file windows scheduled in the Task Scheduler in windows 7.  The vbs runs under the Scheduler if the option "run only when the user connects" is checked.

  When I go to 'Execute if user or not' task does not, either manually (by command file) or through the schedule.

  The vbs is a project of SAS Enterprise Guide.  These scripts, vbscripts worked in Windows XP.

  This is the vbscript code (I don't know anything about vbs, this is generated from SAS for EXAMPLE):

  Option Explicit
  Dim app

  Call to dowork

  "Stop the app
  Otherwise (app IsNot Nothing) then
  App. Quit smoking
  Set app = Nothing
  End If

  Sub dowork()
  On Error Resume Next
  '----
  "Start Enterprise Guide by using the name of the project
  '----
  Dim prjName
  Dim prjObject

  prjName = "------network patht\SQL_tst.egp" ' name of the project
       
  Set app = CreateObject ("SASEGObjectModel.Application.4.3")
  If Checkerror ("CreateObject") = True Then
  Exit Sub
  End If
     
  '-----
  "Open project".
  '-----
  Set prjObject = app. Open(prjName,"")
  If Checkerror ("app. Open") = True Then
  Exit Sub
  End If
     
         
  '-----
  ' run the project
  '-----
  prjObject.run
  If Checkerror ("Project.run") = True Then
  Exit Sub
  End If
     
             
  '-----
  ' Save the new project
  '-----
  prjObject.Save
  If Checkerror ("Project.Save") = True Then
  Exit Sub
  End If
     
  '-----
  "Close the project
  '-----
  prjObject.Close
  If Checkerror ("Project.Close") = True Then
  Exit Sub
  End If
        
  End Sub

  Function (fnName) Checkerror
  CheckError = False
     
  Dim strmsg
  Dim errNum
     
  If Err.Number <> 0 Then
  strMsg = "error #" & Hex (Err.Number) & + "\n" & "as" & fnName & + "\n" & Err.Description
  'MsgBox strmsg' Uncomment this line if you want to be notified via MessageBox to errors in the script.
  CheckError = True
  End If
          
  End Function

  Hello Carolyn111,

  I suggest that you post in TechNet in the official Scripting Guys Forum.
  Click on the link here to post your question. They would be better able to answer your question.

  Thank you

  Marilyn

• RAM Preview does not play from the beginning

  Anyone run into this.  When I RAM Preview, it does not start video playback up to about 1 second at first.  When loops overview it plays from the beginning, problem is only with the first reading.  Annoying to say the least.

  There is a bug in Mac OS x v10.10 (Yosemite):

  After Effects Mac OSX v10.10 (Yosemite)

• Startup EXE does not run in the controller for cRIO-9002

  Hi all

  I have a compactRIO with controller NI 9002. The controller has the software suite.

  1 2011 Labview real-time

  2 NOR-RIO 4.0

  I made simple user LED flashing application target RT using Labview 2011 and build EXE. But EXE will not run after a successful deployment. I tried the cRIO controller using the rest of the basis of knowledge OR troubleshooting.

  http://digital.NI.com/public.nsf/allkb/52E943F7D6E7C0578625720A001DDF6E

  Kindly help me to solve this problem.

  You must disable the optimization to SSE2 option in your build properties that you run on a cRIO 9002, which is an older model that does not support this feature:

  http://zone.NI.com/reference/en-XX/help/371361H-01/lvconcepts/sse2_caution/

• XP does not start from the hard drive

  I have an old pc under win xp. It does not drive start hard when it starts. I always have a cd/dvd in master dvd for it to start windows players. Can anyone help?

  herikhi

  Hi herikhi,
   
  Change the start of the base system (Input Output) BIOS setting to boot from the hard drive.
   
  Consult the manual of the manufacturer, to do the same thing.
   

  NOTE: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from configuration can resolved BIOS/CMOS settings. Changes to settings are at your own risk.

• No OS and does not boot from the CD!

  Help! I have a laptop SONY VAIO that has used to have Windows VISTA on it, but frustrating a friend who thought he knew computers formatted the C drive! Now I have a laptop without OS and even though I have new vista Ultimate edition and windows 7 disks or yhem will start. I changed the BIOS so that it starts only internal optical drive but nothing! I did a repair disc in Windows 7 I have on another computer laptop and who does not, but I can not move forward. Can you please help?

  Hello

  ·         What is the model number of the computer?

  ·         Are you able to press any key to boot from the CD/DVD?

  I suggest you to contact Sony, because you are not able to boot from the DVD.

  Sony support

  http://eSupport.Sony.com/Perl/support-contacts.pl

  I hope this helps.

• My Dell all-in-one printer does not print from the new hard drive installed

  I reinstalled the printer from the drive home, but when I ask it to print it says that it is not implemented. It will copy but not print. I also tried repairing the system, and it is said that it does not find anything wrong.

  tcarter015,

  Have you installed the desktop system utility / portable and drivers from the chipset first? If this is not the case, the rest of the drivers will not install. How to download and install drivers in the Correct order. If there is a Dell computer. If a non - computer Dell, the chipset drivers still need to be installed first.

  Dell inkjet printer?

  What program anti-virus and firewall are you using?

  Rick

• Application created using the BB for Eclipse plugin does not run in the Simulator

  Hi all!

  I created an application using BB plugin for Eclipse.  I try to run in the Simulator, but it never gets displayed (the application icon is never shown).  However, I create a "Hello World" sample, which works perfectly in the Simulator.  My application in Eclipse has never shows all files .cod or .jad, there only have files .jdp and .rapc

  My doesn´t app have encoding problems or errors of any kind (at least not displayed in the view of error).

  TIP: I have copy - paste code in different applications, is that a problem?

  I tried:

  • Restart Eclipse,
  • Configuration of active building of blackberry,
  • Cleaning of the project,
  • Creation of the project,
  • Reinstall Eclipse,

  but none of this seems to work.

  Can someone help me please?

  Best regards

  Juan.

  Hi all!

  In the event that a person gets the same problem, I mentioned.  I found the solution: it turns out that I had a very high class with a lot of code on it and that s the reason why the application does not get launched into the Simulator.  What I did that I shared this class on the 4different classes each managing different parts of the code and now it works perfectly.

  Hope someone is enjoying this, cause I spent a lot of time trying to figure out what the problem was.

  Best regards

  Juan.

• Firefox does not open from the desktop icons

  Hi guys: were adware problem by resetting firefox market and stop for 12 months. Now I virtue open in the... Task Manager shortcut icons / start bar will not work. Any advice much appreciated

  Hello

  Try Firefox Safe mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that temporarily disables hardware acceleration, restores some settings and disables add-ons (extensions and themes).

  If Firefox is open, you can restart Firefox Safe mode in the Help menu:

  • In Firefox 29,0 and above, click on the menu button

    

    click Help

    

    then select restart with disabled modules.

  • In previous versions of Firefox, click on the Firefox button in the upper left of the Firefox window and click help (or click on help in the Menu bar, if you do not have a Firefox button) and click on restart with disabled modules.

  If Firefox is not running, you can start Firefox in Mode safe mode as follows:

  • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac: Hold the option key during the startup of Firefox.
  • On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
    (you may need to specify the installation path of Firefox for example/usr/lib/firefox)

  When the Firefox Safe Mode window appears, select "start mode safe."

  

  If the problem is not present in Firefox Safe Mode, your problem is probably caused by an extension, theme or hardware acceleration. Please follow the steps described in the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. This might help others with the same problem.

• Satellite, L9W Click-Mini-B does not start from the USB flash key

  I have a mini click L9W - B.

  * What I'm trying to boot from a bootable USB key.

  I tried different sizes (1 GB to 32 GB), different manufacturers (without name and brand) different systems (for example. Linux distributions, rescue, antivirus, Acronis Rescue sticks), EFI sticks and non - EFI.
  All USB keys to start correctly on my computer desktop and even with my other laptop.

  * The Mini Windows 8.1 updated, the current version 1.70, in the BIOS BIOS are Secure Boot and TPM , which I've also tried a variety of combinations. The stick will be recognized in the start menu, the name of the USB device is displayed.
  I click on "USB", the Mini restarts, the reader is addressed (the LED flashes at the stick) is launched but not USB, but even once the HDD / SSD.

  If Windows starts, the key works fine. It matters little that, two USB ports, I use, or if the docking station is connected or not.
  If I restart Windows - settings - settings of PC - update / restore - restore - Enhanced start - use a device - try EFI USB Device, which is exactly the same thing happened.
  who can help?

  I hope that there are German support. -Hopefully, there are German-language support.
  If this isn't the case, please contact me.

  Message has been translated

  I don't know what is the problem here, but it turns out that it is certainly possible to boot from the memory stick bootable USB flash.

  Many users have been abele to boot from the memory stick USB external flash, but it is necessary to disable the secure in the BIOS boot option.
  Also if you want to install an unsupported UEFI system, the boot mode must be changed of UEFI in the CSM.

  by the way: it's English language community

• Portege R500 does not start from the XP CD

  My basic problem is the following - I have a Portege r500 with Vista on it. I'm moving from Vista to XP Pro, but when I put a bootable XP installation CD in the drive, it turns, looking around for awhile and then I get a blank screen with a cursor blinking on it.

  Now, I've done this before, so I know that something is supposed to happen, but nothing don't. And I tried 3 well-known installation CD, is not a problem of CD. Do I need some update BIOS/firmware to boot from the CD on this thing? Or am I missing something?

  Help!

  Thank you.

  Often the Portege R500 should be able to boot from the CD/DVD drive and should begin the procedure of installation of the CD Win XP SP2 installation.

  But it is a tricky thing.
  The Portege R500 needs an Intel (r) Matrix Storage Manager (iMSM). This iMSM is necessary to recognize the HARD drive and install Win Xp on the HARD drive.

  I recommend you and create a new CD of Win XP starting with software called nLite to integrate the SP2 of Microsoft and Intel Matrix Storage Manager (iMSM) in Win XP.

  You can then use this CD for installation.