Satellite P300-212 - system causes the periodic high CPU load

Similar Questions

• Satellite P300-1CN - system and the BIOS does not start

  Hello!

  I have a problem with my laptop Toshiba Satellite P300-1CN. When I start my laptop does not start in Windows.
  When I tried to go to BIOS, doesn't let me do as well. I can see only the Toshiba logo. When I press F2 or F12 I received the message:

  + Enter in the configuration. Please wait + or
  + Entering the MultiBoot Menu. Please wait +.

  I tried + ESC +++ Power Buton + then + key + F1. I can see all the information:
  + Phoenix Bios 4.0 release 6.1 +.
  + Cpu = 1 processor detected, cores per processor = 2 +.
  + Intel Core 2duo T5800 @ 2.00 GHz +.
  + 3070 M RAM passed system +.
  + 2048 KB L2 Cache +.
  + Shadow system bios +.
  + Video Bios shaded +.
  + Fixed disk 0: Toshiba MK2552GSK +.
  + ATAPICD; ROM DVDRom... +.
  + Mouse initialized +.
  Press F2 to enter Setup or press F12 to enter MultiBoot Menu selection.

  but after the computer laptop just gel but the processor is still running.

  I removed the HARD drive and tried to put different the a (work laptop) - still does not
  I removed the memory and tried to put different the a (work laptop) - still no job

  I have no idea what it is causing the problem.
  I have this laptop over a period of 2 months.

  Thank you.

  > Looks like I have to make a phone call to the Toshiba Support Centre
  You must enter in Toshiba authorized service provider contact such as suggested by Luke above
  All the details can be found on the Toshiba page. (the path above will point you to the ASP database)

• Satellite p300-212 problems after downgrade to xp (yellow? and!)

  Hello

  I had the same problem as the guy FOM this thread---> [http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=174977𪮁 | http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=174977𪮁]
  I lowered my Satellite P300-212 from Vista to XP. I used an installation Win XP CD of Win professional XP including Service Pack 3.
  Then I installed all the drivers from the Toshiba site.
  But I still have a yellow! in the Device Manager to the "Audio device on High Definition Bus". The details of this device show "HDAUDIO\FUNC_01 & VEN_1002 & DEV_AA01 & SUBSYS_00AA0100 & REV_1001\5 & 3B6F18F1 & 0 & 0001"
  So I don't know, what driver I need to take to solve this problem. Rather, modemdriver etc are all installed and work fine!
  In the thread I linked above, the guy only has not copied driver WICH he installed manually. :(

  I hope that someone of you can help!

  Best wishes.

  greatwolfman

  Hello

  You should go to remove device manager and scream this device with the yellow! and?
  Restart the unit.

  In addition you must update Win XP for the last State because there are many patches that are required under Win XP latest series laptop.

• Card VGA for Satellite P300-212

  Hello

  I need help.
  I own a Toshiba Satellite P300-212 (model No. PSPCCE - 052001 GR / series n ° 39128963W).
  Now my VGA is broken.
  Now, I want to fix, but I have different information about the 'original' built in my laptop VGA.

  1 TOSHIBA BD3 VGA/B-M96 Q - DR. A000039790
  2 TOSHIBA BD3 VGA/B-M96 H - DR. A000045290

  Which is the correct?

  The 2nd Board has 2 different numbers: 81869TBS & 98415TBS
  But the number of pieces is the same.
  Now I'm confused.

  What are the differences between the boards and which is the one I should buy?

  Thanks for the help!

  I m not an expert for this but what I've found, is to follow:

  This laptop model comes with two different graphics controllers
  -ATI M96 DDR3 (1 GB)
  -ATI M96 GDDR3 (1 GB)

  The only difference is that ATI M96 DDR3 (1 GB) doesn't have analog output (S-video/composite) TV.

  Has your computer laptop S-video port available?

• Satellite P300 - blinking icon to the Start button and the gel

  My high school daughter years showed me his homework in WORD was starting to show different symbols flashing all the time on the page. I suggested she reboot Satellite P300 - 01, and since then, we have not been able to go beyond the base of office.
  The Start button (or office) flashes continuously and we cannot enter in all programs at all.
  I'm very grateful for any assistance.

  The P300 is only 2 months old.

  Hello

  Believe me, it is really not easy to say what is happening with this laptop. as a first step, you can try to start Notepad using F8 and enter safe mode.

  If these will be works, start System Restore utility and attempt to restore the operating system on time earlier. Perhaps one day before all this began. I hope that you will be able to use it again as before.

  If this isn't the case, please let us know.

• Satellite P300 - randomly turns off the power when connected to the external monitor

  Hello

  I have a Satellite P300, Intel Core 2 Duo T9400 2.53 GHz, 4 GB RAM, ATI Mobility Radeon HD 3650 512 MB, running Windows 7 ultimate x 64.

  Recently, I bought an AOC v22 led screen and connect my conputer via HDMI. Everything works fine, but sometimes my computer off just randomly. I might have something to do with my computer overheating, so I clean the fan, but this was not good.

  I think it has something to do with the LED screen because my computer was never off his own.

  Hello

  So this also happens if you n t connect laptop to external display? So, you can determine what is causing this problem.

  If the computer laptop doesn t turn off without external monitor, you should try to update the BIOS and the display driver. Two updates that you can find on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  You close the lid if you have connected the external monitor?
  What operating system do you use?

  In addition, it would be interesting to know how you clean the laptop. That's why I use the jet of compressed air that can blow the dust from the cooling fans and you don't have to disassemble the laptop.

  Good bye

• Can satellite P300-20R - I use the latest drivers from site Web AMD/ATI?

  I got a Satellite P300-20R now I want to update the video card drivers - ATi HD4650.

  Can I use the latest Catalyst for the mobility card that I find on the AMD/ATi website, and what is the procedure?

  Toshiba drivers are tested and adapted for certain graphics cards. Driver Toshiba will not force the graphics card to run the highest level and therefore protect laptop from overheating.

  On my Satellite P300, I use Windows 7 32 bit and driver Toshiba. It runs stabile and I'm happy with it.

  To be honest I don t want to use ATI driver and unfortunately cannot give you an answer to your question.

  Can you please tell us which of operating system you are using and what version of driver you want to install?

• Satellite P300 - 18 M - use the card reader for Vista Ready Boost OK?

  Hello

  I have a P300 - 18M, and due to get a new phone, have a spare Micro SD 8 GB card.
  I put it in the card reader, and I currently use it for Ready Boost, even though I have 3 GB of RAM, there is certainly a performance gain...

  However, no one knows if this could endanger the card reader? (IE damage it in any way) to be used all the time?

  Thank you

  Jack

  Hmm. I wonder about the 8 GB card Micro SD.
  As far as I know and according to some details in the internet, Satellite P300 supports the microSD (with adapter) 512 MB to 4 GB.
  Usually the laptop card reader s should recognize either large 4 GB microSD cards.

  However I doubt it might affect the functionality of the card reader in the worst case that the 8 GB microSD card will not be recognized by the card reader

  See you soon

• Satellite P300-1GK cannot find the display driver for ATI Radeon HD 4650 Win XP

  Hello

  I can't find the driver for my ATI Radeon mobility HD 4650. There is an error on the toshiba Web site download page.
  My laptop is a P300-1GK (PSPCCE). The drivers are for the 3650 etc... not for the 4650. Where can I find the right idea?

  ATI Mobility Radeon HD 4650 graphics card
  VendorID: 0 x 1002
  DevideID: 0 x 9480

  Thank you

  Hello, Damien

  Sorry, but can you please tell me why this driver is not the right one? An error message or what?
  The same driver that Toshiba use for the Windows XP Home edition recovery image.

  Unfortunately my P300 is not with the ATI graphics card and I can't test it.

• Satellite A 110 is suspended due to high CPU temperatures

  Hello

  My computer is hung up on me while running certain applications (such as Dreamweaver CS3) or other situations in which work the CPU at maximum performance. I suspect that the reason is high CPU temperatures and indeed download several CPU, monitor applications (like thermal analyst intel) my average CPU temperature is around 61 degrees (Celsius), and before the computer hangs (instantly - just completely stop lose power), it reaches very high and not necessairly after working for a long time.

  My questions:
  1. is this a known problem with this model?
  2. is there anything I can do to limit this problem and avoid data loss?

  Thanks in advance,

  URI

  I think you will need to contact the ASP in your country for assistance.
  In your case maybe the cooling module may not work correctly. Probably the thermal grease that is placed between the CPU and the cooling module must be renewed.

  All these things need to be clarified.
  So call it the ASP.

• [MSD] High CPU load of Java

  Hello

  One of my colleagues has a problem with the CPU load high caused by the process of java under the wrapper, it uses the latest version of TMS 13.2.2 with TMSPE, the server running Server 2008 R2 Enterprise, 4 GB RAM, 64-bit java (9) was last updated was applied, to no avail.

  The process of java on my TMS system runs at 0.54% avg, the only difference I see is the amount of RAM, its user base is tiny (80 users).

  Any suggestions on what he can try to diagnose the problem?

  

  Hi you use findme?

  You can check if the address of the video template is the same as the address of device model?

  In the diagnostics of tmspe can also see if the importation of the aircraft has a work «»
  Circle on it as his performs a constant import?

  If you do not use findme, disable it on tms tmspe settings and restart the tmspe service. The cpu is now stable?

  / Magnus

  Sent by Cisco Support technique iPhone App

• 100% high CPU load and memory usage

  Hi all

  My company bought a new appliance IPS 4510 and after initial installation, I see that the CPU load and memory is 100%. The device is not in a production network. Is this normal or there is a hardware problem? Enjoy a Counselor about it.

  Concerning

  Christine

  Hi Damien,.

  It is actually normal behavior for an IPS sensor.

  To measure the actual load of an IPS sensor, you will want to monitor the "percentage load treatment" of the analytical engine that processes all inspection processing for the sensor.

  You can view these statistics by using the command 'display the scan statistics-engine '.

  Also, the sensor running version 7.0000 E4 5,0000 E4 (or later version), you can check the load percentage value Inspection displayed by the command "Display inspection-load" in its place.

  Hope that answers your query.

  Cyril Shankar

• Network - high CPU load problem

  Hello

  I've updated the 2.6.24 kernel 2.6.26 (under Debian Lenny 64 bit) on the host computer. And I have a problem with the network communication.

  I have 2 Virtual PC (Windows) on the host Linux (Debian 64 bit). Each virtual PC to fill only one network adapter.

  I have VMware Server 2 for 64-bit, my PC has Intel Quad Core and ethernet card 4 on the card mother Gigabyte EP45-DQ6.

  When virtual PC start communicate via network - load cpu in virtual card pc go to 40-50 percent, after the stop communicates on the NIC - cpu load to go from 1 to 4%.

  CPU host increase load when virtual pc communicate too.

  My linux use r8169 for ehernet adapter.

  What is the problem?

  Thank you for your response.

  Soory for my English.

  Reduce the numer vCPU one per guest. If you have a multiprocessor/kernel HAL, you will need to change this, but give it a try without changing that, first of all.

  AWo

  VCP 3 & 4

  Author @ vmwire.net

  \[:o]===\[o:]

  = You want to have this ad as a ringtone on your mobile phone? =

  = Send 'Assignment' to 911 for only $999999,99! =

• Satellite L655 - upgrade RAM causes the system crash

  I bought and inserted 2 RAM Kingston 4 GB chips. When I boot the Windows and Ubuntu 14.04 (I have a dual boot) fails.

  If I run a test memory Ubuntu start menu, the system hangs.

  I put the old RAM and all is well.

  To resolve this problem, I tried upgrading the BIOS firmware using the software available on the Toshiba site, but it gives me an error saying that the battery must be fully charged and the power adapter is connected. A fully charged battery with the charger plugged still gives the same error. I replaced the battery, which was old and lasted 5 minutes, but the error remains on the upgrade of the bios.

  Any ideas what could be causing this would be appreciated.

  Can I get hold of a BIOS upgrade CD ISO which does not check the status of the battery and the charger? I promise you I will not let the of of the machine while upgrading the bios is going forward!

  Thanks in advance.

  Hello

  At first, I must say that updating the BIOS won't help you any. Many people think that the update of the BIOS is a kind of "quick fix" for different questions.
  In my opinion there must be a compatibility problem. Did you buy the memory right modules approved for your system?

  I don't know what 665 do you have exactly, but I think that you need the modules of DDR3 - 1066 MHz and 4 GB of RAM has part number PA3677U-1M4G.

• Re: Satellite C660D - cooling system of the fault

  Hello

  I get a message on my cell, read, defect detected in the cooling system immediately turn off the power and claim a satellite service. It is not the fan I had the I.T. guys at work, take a look.

  It seems the front of the laptop, where is the card reader and the surrounding area is to hot.

  One idea would be very welcome.

  Thank you

  Dave

  > Is not the fan I had the I.T. guys at work, take a look.
  What have they checked exactly? Have they dismantled the notebook and check fan feature only?
  As much as I know the cooling system is not just the fan. The motherboard has several sensors which take care about material temperature overheating and critical. Maybe one of them does not work correctly.
  In my opinion, you should contact the nearest Toshiba service provider and ask for help.