Satellite P300 - extremely low FPS

Similar Questions

• Why Windows 8 Pro becomes extremely low FPS on my high end Graphics Card compared to Windows 7 that had ZERO lag problem!

  Since I bought Windows 8 Pro for my Gaming Office all I have is having problems with the game, like Midtown Madness 2 allows to get as stable 60 fps but now on windows 8, I'll have 3 to 10 fps and GTA IV gets like 8-24 FPS on this graphics card high end and why Windows 8 Pro becomes extremely low FPS on my games compared to Windows 7 which had no problem who worked as its supposed to work. and it is a High Spec computer to run all games maxed out with all the problems of lag, but for some reason, there are problems of lag. I had uninstalled the graphics drivers in the control panel and start in SafeMode with Fusion driver to remove the remaining data from pilot and I reinstalled the last chart and without success, I always get problems.

  my processor is an AMD Phenom II X 6 1100t, graphics card: Sapphire AMD Radeon HD 7970, 16 GB DDR3 1333 Mhz Ram my computer cannot be low power!

  Actually my problem is solved now. what I did to disable Hyper-V in windows features. Windows 8 is now faster than windows 7 in games or even better.

• Satellite C660 - extremely low WIFI signal strength

  I bought a brand new 2 the Satellite C660-7 t and have the following problem:
  The strength of the WIFI signal is very bad!

  If I am 5 meters from the router, there is a signal strength bar!

  On another laptop, I have 5 bars at this distance!
  WLAN is unusable...

  The problem also occurs if the power supply is connected, is no energy problem.

  Installed the latest driver for Atheros, did not help.
  Made a recovery of HARD drive, did not help.

  Help, please!

  Have you checked all the WLAN settings?
  Did you compare the settings on another laptop?

  If possible can test you with another router?

• Satellite P300 - 19 p - sound low battery notification

  Does anyone know if there is a way of creation/implementation of an audible low battery notification? I can't find a.

  Satellite P300-19 p/vista

  Hello

  You can set a sound notification in the control panel-online sounds and audio devices-online Windows sounds.

  Here, you can set a low drum sound.

  Welcome them

• Satellite P300-161: alarm low and criticism not fire

  Hello.

  I just bought a Satellite P300-161 with Vista and every time alarm if there is only a pop-up notification at the low or critical level, you but no sound alarm. I checked the settings under "advanced power management" and "battery" and both have the value default to 'ON' for low and critical battery alarm.

  I also made sure there is a noise linked to these events under 'Hardware and sound', 'System sounds' and "low battery alarm" and a criticism.

  The default sounds are really sweet so I registered and chosen my sensors clean up but still no luck.

  I did a search on google and apparently several people had the same problem. In addition to suggest to both look like the above parameters, some have said that it is a general problem with Vista that will be fixed with service pack 1. I already service Pack1 so that does not solve it.

  The other thing that I found via google is that apparently Vista doesn't offer it through the message system, but makes it available for 3rd party software. It seems ridiculous that Toshiba withdrew its usefulness because of power management especially in Vista.

  I wouldn't mind an alarm from the BIOS, but looking at the settings, I couldn't find all the options. I can only note a pop up and if I play music or something, I have completely run out and the computer into hibernation which is really annoying.

  I would be grateful if anyone has any suggetions on how to solve the problem.

  Alfonso.

  Open the Volume mixer and make sure that Windows sound option is not set to mute.

• Satellite A100-532: the microphone volume is extremely low

  I just bought Satellite A100-532 and I have a problem with the audio input. I can't use the microphone to chat with my friend on msn or even record my voice on the hard drive because the volume is extremely low.

  I tried to turn the volume on the desktop and on the RealTek HD audio Manager, but nothing helped. Microphone works perfectly fine, as I hear myself on the speakers.

  Normally, with my old laptop (M30 series) I could use sound recorder to record the music that I play using Winamp or WinMediaPlayer, but for this new laptop it detects all the sounds at all... just silence.

  Please notify.

  Hello

  You should also check the volume controls in the "Audio & Sound devices" in the Panel.
  In the 'Volume' tab it please go to "Advanced".
  Then a "Volume control" should appear.
  Check if all controls are set at a high level.
  In addition, enter the 'options' and 'properties' and activate all volume controls.
  Also change to "recording" and activate here also all the controls.
  Additional you must check if the "check" is set to high.

  Use the 'Advanced' mic option and play with thrust mic settings.
  I'm sure that you will find the best settings for your mic record

• Need help with extremely low rates of FPS on X 51 new R2

  I just bought a new Alienware X 51 R2 to replace an old Alienware model with a Radeon graphics card that I bought in 2012. My old machine has done useful work to run the games, and I was getting about 30 FPS on Grand Theft Auto 5 to high heat (especially) with a resolution of 1440 X 900. For most of the games I could play on normal settings and get 30 + FPS and I was happy with it. Not so with the new X 51 R2 I bought.

  Almost immediately, I noticed that my FPS with GTA V was extremely low. When I start a game (1920 X 1080 with normal settings), the FPS is around 120, and the game plays smooth as butter, but as soon as I start to move starts to decline until it is of the order of 15-20. Enter a car is even worse, with FPS readings between 5 and 10, and at this rate, it is impossible to play. The problem seems to occur any resolution, I start the game or if I push the graphics settings to the lowest available.

  I thought it was a driver problem, so I uninstalled all the drivers and software NVIDIA and a clean installed drivers, but that has not helped. Then I started to download and test the other games that I have to look at my FPS with them. Note that I tested each game first leave the game choose the graphics setting, then I tested it again on smaller settings at 1920 X 1080 and 1440 X 900.

  • Skyrim on old PC: 40 FPS and smooth at 1600 X 900
  • Skyrim w / default: 8-12 FPS and a lot of stuttering and offset
  • Skyrim @ 1920 X 1080: 12-15 FPS with less stutter but terrible mouse and keyboard delay.
  • Skyrim @ 1440 X 900: even at 1080
  • RAGE on old PC: 50 to 60 FPS and smooth at 1600 X 900
  • RAGE w / default settings: 25-35 FPS, but ran pretty smooth.
  • RAGE @ 1920 X 1080 and 1440 X 900: performs the same as the default settings
  • CoD4MW on old PC: 50 to 60 FPS and smooth at 1600 X 900
  • CoD4MW w / default settings: 10-15 FPS and a lot of stuttering
  • CoD4MW @ 1920 1440: 10-15 FPS and a lot of stuttering
  • Civilization 5 on old PC: 40-50 FPS and smooth at 1600 X 900
  • Civ5 on default settings: starts at ~ 35 FPS and descends until it is less than 20 years. Game play is smooth enough, as long as I'm not scroll the map.
  • Civ5 on 1920 X 1080: as with the settings by default, starts at ~ 35 FPS and begins to drop immediately.
  • Civ5 on 1440 X 900: much better that it begins at 60 FPS, but like the others, begins a fall after a few minutes, but not too far. Tube in the lower 20s.
  • Roller Coaster Tycoon 3 on the old PC: 90 + FPS to the highest settings (game released like 10 years ago)
  • Roller Coaster Tycoon 3 to 1600 X 900: 50 to 60 FPS and quite smooth.
  • Dead Island on old PC: 40-50 FPS and smooth at 1600 X 900
  • Dead Island in 1920 X 1080: 5 to 10 FPS and a lot of stuttering and keyboard/mouse lag.
  • Dead Island at 1440 X 900: 10-15 FPS and stuttering with some lag mouse.

  Here is a list of some of the things I've tried:

  1. Downloaded FRAPS and used instead of the tool integrated FPS w / steam. Readings FRAPS corresponding to the display of the steam.
  2. Wipe the old NVIDIA drivers/software and did a clean install only the driver.
  3. Turn off VSync and tried the Adaptive VSync; neither helped.
  4. I bought a keyboard Roccat / mouse and I was wondering if they were part of the problem, so I uninstalled them and used a plain Microsoft keyboard and mouse. Did not help.
  5. Set the executable of the game to the highest priority in the Task Manager. Not good.
  6. Watched the memory usage, CPU utilization and disk i/o while playing to see if I have the hardware bottlenecks. CPU usage never had more than 20%. Memory usage has never had more than 37%. Drive e/s never had more than 10% after the initial load.

  System Specs:

  • Alienware X 51 R2
  • Windows 8.1
  • Processor: Intel Core i7 core 4 4790 @ 4000 MHz
  • RAM: 16 Gb DDR3
  • Graphics card: NVIDIA GeForce GTX 960 w / 2 GB of memory
  • HARD disk: 7200 RPM Toshiba DT01ACA200

  I'm pulling my hair out trying to figure out how I can solve the problem. This is the first time I've owned a GeForce card (always had ATI Radeon in the past), and I'm starting to question that decision. The only game I could get decent framerate on is 10 years and more, and it's pretty frustrating.

  Someone has an idea of what I can do to get to a resolution?

  There must be something wrong with the fan 960 GTX. Either it has disconnected or broken. Or in bulk (screws not doing their job). I do not think that it is disconnected because it is detected, so it is either broken or it is loose.

  You can check yourself on the GPU or contact technical support to examine it.

• Very loud beep on the Satellite P300-17R

  Satellite P300-17R: when my virusscanner (antivira) detects a virus or spyware it gives a signal very hard, and I mean very hard! In the program, I can't change the options of caution and close my sound card doesn't help either.

  Can someone help me get rid of this nuisance

  Post edited by: DKing

  *@razorrazor*
  This signals warning has nothing to do with the problem described in the other thread (link in your message)

  *@Broi*
  You can change the volume in Control Panel-> sounds-> read-> Speaker tab, then press the properties button-> Choose the level tab-> settings of PC beep at a lower level.

  Good bye

• Satellite P300 - 1 c 9 - How long works the battery?

  Hello

  I was wondering if someone could let me know how long I should wait for the power of the battery on my satellite p300 - 1 c 9 to last?

  The laptop is now 11 months, again it only lasted a meager 1 hour, now its down to 44 mins which seems to be very short.

  It doesn't seem to be the point of a lot having a laptop that must be connected whenever you use!
  I talked to toshiba tech when he was nine and was advised to unload a few time completely to form it and he said he would get me another 10% (wow, a whole 6 minutes), which made no difference.

  look forward to hearing any suggestions.

  Angela

  Hello

  Sooner or later each battery will die and lose the own performance that s nothing unusual

  You should know that the battery working time depends on the use of the laptop.
  The battery much faster running high-performance applications that need many remedies of material.
  All parts of equipment must be able to! CPU, GPU cooling modules, display, etc.

  Reduce the brightness of the screen and set the CPU or GPU to lower performance in order to save the battery.
  You can do this in Win7/Vista power management!

  Here's a useful HowTo:
  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=41

• Satellite P300-1FY - BSOD right video driver problem

  Hello

  I bought this laptop a month ago to replace my old who crashed without possibility of repair and I had problems with the video drivers since then. I hoped that the problem would resolve since I am in the middle of my exams and I really have time too much more time to spend to fix it myself, and I also can not him go to the store because I need some software for my exams.

  So the problem that in my view, lies in the video drivers for the graphics card ATI Mobility Radeon HD 3470. While I'm working on my laptop my screen all of a sudden turns black and my computer crashes (including the very unpleasant noise when I play music at the time) after 5 seconds it flashes live and displays a message indicating that a beelschermstuurprogramma niet Super perfect en is naked herstela. In English, it would be something like s video drivers did not work properly and have now been repaired.

  It is of course extremely irritating, but it became even more then a few weeks previously when I had a blue screen because of a similar error. What make me lose half an hour of work on my laptop. (and as someone who has had reviews knows, half an hour is not something you can always afford to lose) I ran the wizard, and he sent me to the ATI site to look for the drivers.
  The downside is that I could find many drivers, but none for the 3400 series. After an internet search for awhile I finally found some drivers for these series (or they pretend to be), however, this installer was corrupted. I also searched the Toshiba site, but I did find what I was looking for.

  The laptop also freezes from time to time without the screen turning black.

  Could someone help me with this problem?

  Louis-Philippe

  P.S.: quality of the keyboard is really bad also

  First of all, you should post the exact code of BSOD and what operating system you are using. Then, we can search for this problem and what is the reason for this on the Microsoft Knowledge Base.
  Then please send the BSOD code.

  In addition, I put t understand why you can t find a driver on the Toshiba site. Satellite P300-1FY belongs to the PSPCCE series and so I can find a display driver for XP and Vista. So where is the problem? Maybe you should try to install this driver:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  But before you install the driver, remove the old driver first. Reboot the laptop and clean your system with CCleaner. Restart the computer and then install the latest version on the Toshiba site.

  The display driver on the factory site Internet (ATI) doesn't work because it s only for cards of office and not for laptops. Then, you can t install and your laptop has only been tested with drivers of Toshiba.

  If the new driver doesn't work, you should try to update the BIOS too. You will find on the page of Toshiba.

  Good luck!!

• Satellite P300-275 - Crash when CPU at full load

  Hello everyone

  I have a Satellite P300 - 275 (PSPCCE) and a big problem after maintenance rear.

  When i games (average after 15 min Details CSS, ops black 15 min, 15 min bulletstorm...) and CPU it fully charged, my computer crash and I have to wait a few minutes before resuming.

  I'm doing some tests, but I don't know how it can solve the problem.

  -Test Prime95 (connected)
  Tested during a night and no problem, no crash
  http://ImageShack.us/photo/my-images/829/resultats.jpg/

  -Test OCCT (connected)
  Being tested for an hour, the temperature rose to 90 ° C but no problem, no crash

  -Test Memtest86 + (connected)
  I tested the two strips together and then each band separately and the pc crashed after 10 minutes (2x2gb DDR2-800)

  -Test FurManrk
  -He led for 15 min, 4 average fps on battery, no problem!
  -It ran for 30 seconds, 8 average FPS with battery and crash!
  -He ran for 30 min, 4 fps average, on battery, and then I plug the sector, crash after 30 seconds!

  Someone has an idea?

  THX

  Hmmm I have a few ideas.

  First of all, you should check if the laptop cooling modules are free of dust and debris.
  This prevents air circulation and cause of high temperature.
  In addition, make sure that there is enough free space around the laptop.

  Second idea; Use the Toshiba display driver. This driver supports protection of the GPU overheating. Use of that other drivers could lead to high temperature.

• Satellite P300 - Touchpad and media keys does not

  I have two problems with my Toshiba Satellite P300 19N.

  First of all, a few months ago, my touchpad became completely unresponsive. I had not installed or changed something important that day. It has just stopped working while I was using the laptop. Both the buttons and the actual pad do not work. I bought a USB mouse as a temporary stopgap, but I want the problem to be resolved. Anyone have any ideas on what could be the cause and possible solutions.

  This week, the media hot keys above the keyboard (next to the power switch) has stopped working. I wiped them with a cloth dry because the cell phone was dusty and the play/pause button lights but nothing happened. Now, none of the shortcut keys are sensitive and the play button stays on, even when the laptop is turned off and unplugged.

  If anyone has any advice on hw to solve these two problems, I would be extremely grateful.

  JRCP salvation,

  If the touchpad doesn't respond I guess what he s just disabled and you can use the key combination FN + F9 to disable/enable it.
  Check this box!

  Regarding the multimedia keys that you mean that you must reinstall Toshiba Value Package added. This package contains drivers for the keys and needs to be reinstalled. In my case, it could solve the problem and you can download it here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  But in general the buttons be used with Windows Media Player

• Buy a custom configuration of Satellite P300 online?

  Hello world

  I have a question. I bought the laptop Toshiba Satellite P100-260 3 years ago. Recently, it was covered with water and it costs a lot to fix.
  I also had a windows XP media center on it.

  The question is: can I buy a custom Satellite without Windows and the memory of the device model?

  I saw at www.toshiba.com is it low to order a custom configuration of Satellite P300, but it seems to work in the United States, but I live in Europe (Estonia).
  Is it possible to order the Satellite P300 with configuration custom in Estonia?

  You mean you want to buy the Satellite P300 without preinstalled Windows operating system and RAM?

  Boyfriend sorry but I don t think it would be possible

  Of course, I've seen some Satellite laptops which are supplied without operating system preinstalled, but this does not apply to all series. In addition all laptops are equipped with RAM and other internal devices

• Satellite P300 - 1-9-10 SD card reader code

  Hi all

  I have a new Toshiba P300 - 1 9, good for six months, and have just for the first time I tried an SD card into the slot of the multimedia card digital.
  The card does not appear in 'my computer '. In Device Manager it shows with the yellow sign fault warning of a problem.
  Double click it gives this message "this device cannot start code 10" in the management of the disk of the card is not listed in the upper pane, but shows as a player in the lower pane without a drive letter assigned.

  If I try to assign a drive letter, I get a message saying that the operation failed because the disk management console view is not updated.
  He wants to refresh the view by using the refresh task. Which does nothing.

  I reinstalled the drivers for the SD card listed under disk drives when the card is in, storage controllers and generic volume on storage volumes. I've also updated the driver for SD host adapters.

  A card format made no difference. I know that the card reader is correct because a few days ago, I took an image updated with Acronis TI and then reinstalled the OS from the recovery media. The card worked fine then. I have now put the Acronis image and the map does not work. I had loads of driver updates on the road to Toshiba for various things (but not the card reader) through their service Tempro, including an update of the bios.
  I wonder if the bios update caused the problem. I'm debating whether the BIOS to the default setting.

  I have tried everything I can think and followed by a number of suggestions after googling the problem. The MS Knowledge Base was not very useful and many people seem to have the same problem. I am now at a total loss.

  Thank you

  cheven

  Any ideas would be welcome.

  Thank you.

  Hello

  The 10 error code means that the device cannot start.
  Card reader is not ready and is not running and therefore the SD card cannot be used and is not recognized in my computer.

  In most cases the update driver/relocation should help sort put them this question.
  Satellite P300 - 1 9 belongs to the PSPCCE series.

  The European driver Toshiba page provides the controller driver of card reader for this model of laptop. This is the driver that controls the SD card.

  I recommend that you download this driver. Access the Device Manager, and then uninstall the previous driver. Reboot the laptop.
  After restarting again the OS must find a new device and should request the necessary driver.
  Then you must point to the driver that you downloaded and should complete the installation.

  Usually, this should solve your problem.

• Satellite P300 - 18 M - VGA to S-video / RCA cable - no picture on the TV

  Hello

  First of all, I am trying to use my other laptop (Dell Lattitude D630) I have with my TV, however, this other laptop has only a VGA output.

  So I bought a VGA adapter S-video and RCA e - Bay: [photo: http://members.lycos.co.uk/jtfearnley/Hosting/Images/RCA%20To%20S-Video%20RCA.jpg]
  However, this does not work, the laptop in question has 'TV Out through VGA', so it should work according to various Web sites and the seller...

  However, I then tried to test it with my Satellite P300 - 18M and it does not work with this, I tried the composite (yellow port) and S-video port, in three different TV, and there is no picture.

  I tried to change settings in the ATI Catalyst Control Center, for example, force TV detection and it detects the TV, but there is no picture on the TV, only the gray lines.

  If I cange the resolution and refresh rate I can kind of get an image: [image TV | http://members.lycos.co.uk/jtfearnley/Hosting/Images/TV.jpg]
  But it's the best thing.

  In the past, I have used all three TVs with my P300 using direct S-video, so I don't understand why it will not work with this card.

  Also, I know this isn't a forum for Dell, but I am not a Member here, and this question is also on my Toshiba laptop, because it would be useful to be able to use instead of S-video RCA adapter.

  Thank you

  Hello

  To my knowledge the VGA port can be used only in connection with an external monitor/LCD but not with the TV.
  The point is that the common PAL TV (not LCD or plasma) supports a maximum resolution of 720 X 576px 50 Hz (NTSC 720 X 480 at 60 Hz).

  As far as I know that the s-video port provides such a resolution.
  The VGA port offers higher resolutions are supprted by more external monitors.

  However, I never connected the laptop to the TV via the VGA port so I can provide only some assumptions.

  Sure, it might be possible that the S-video and RCA adapter VGA is not fully compatible.
  I read on the different pages that at low cost without name adapters don't work as it should.