Satellite P300D-20U - BSOD BCCode 124

Similar Questions

• Satellite P300D-20U - BSOD 0 x 00000124 caused by hal.dll

  Hi guys.

  After my BSOD's long-term thinking, I got the main reason which probably caused it. It is hal.dll (bluescreenviewer told me). As far as I know, it's a driver of the motherboard.

  Where can I update it? Or what should I do?

  Why you again open thread on the same topic?
  You have already posted this here:
  http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=189835

  You must decide which thread you want to track

• Re: Satellite P300D-20U - I can not install display driver for Win XP

  Hi all!

  I bought the laptop P300D-20U, I installed windows XP on it.
  But now I can not install the driver to display on it.

  I downloaded from this site (it's the only display driver for this laptop).
  When I install and restart, Catalyst Control Center to write me that it do not display driver support and don't launch.
  Windows loads in resolution 640 x 480 and 4-bit color.

  When I'm changing resolution or color apears black screen and nothing happens, in 20 sec it cancels.
  I tried different drivers from ati.com but nothing works :(

  SRY for my English but I hope that you will help me guys, ty

  Hello

  Satellite P300D-20U belongs to the PSPDCE series and I think that it was equipped with the chip graphics ATI Mobility Radeon HD 3470 (M82XT).

  Did you choose this series in the form of European driver of Toshiba?

  I see the Display Driver for Win XP v 8.477.

  If you can not install using the setup.exe, then you should try to install this driver in Device Manager.
  Mark (possibly marked with yellow exclamation) graphics card then choose put up-to-date driver, use the Advanced installation procedure, point to the driver files downloaded from the Toshiba page and apply.

  It should work

• Satellite A500-19w - BSOD BCCode 9 - BAD_POOL_HEADER

  Hey everybody

  About 2 weeks ago, I bought a Toshiba Satellite A500-19w. Have been crackling sounds from the speakers, but also error blue screen & restart.
  So I decided that I wanted a refund because it was out of the question for me to keep a laptop that has been hurt since the first day.

  The Bank refused to give me my money back, instead they gave me a new laptop (the same Satellite A500-19w).

  Now, I have the same exact problems, but since I will not get my money, I'm stuck with it.
  I've had the laptop for 3 days now, and only today I had 4 blue screen errors (the last 3 times, after windows restarted, I don't even have a log of the error so that I could post it here).

  But from what I remember, it was a BCCode 19, & during the last blue screen that I had, I saw "BAD_POOL_HEADER".
  I was going through the forums desperately try to find a solution, but have not found anything so far.
  I don't know what the problem is, I really need help.

  My OS is a Windows 7 64 bit Home Premium.
  (All A500-19w normal sheet example 1 g Ram, 230 M nVIDIA VGA...).

  I really really need help.
  I have a lot of work to do and this laptop is the only tool I have.
  I don't have access to other computers.

  Help, please.

  And one more thing, service of Toshiba Tempro advised me a new update of the BIOS, but when I tried to get it, he told me that ' you seem to have the same version or newer "or something like that & the update did not work.
  Yet once, please, I'm desperate for help.

  Thank you.

  Hello

  I think the problem is software partner.
  The google provides many successes on the BSOD BCCode 19 and the BAD_POOL_HEADER

  Unfortunately, it is not easy to say which application or a driver could cause this because its always a different software...

  But you can check the minidump file to obtain more details on the error...

  Here is a document of Microsoft Knowledge on how to play files of dump Windows creates the memory.
  http://support.Microsoft.com/kb/315263

  It should help to find the source of the BSOD

• What is the origin of Windows 7 BSOD BCCode: 124

  Hello

  I'm trying to understand what is the source of my BSOD. I had this problem for several weeks. It not always plant, but when that happens, it's usually after I shot recently on my computer. It shows the Blue error screen stop, try to restart it, shows a page of quick bios that is not the same one that shows at startup and then stops again. If I hit the power button it will usually be back on and start working a little bit. I've had the computer for about 2 years. I have the specs and details of the error below.

  Please let me know if I can post anything that might help.

  Thanks for your help!

  Update:
  Card mother-GA-Z77X-UD5H
  Corsair Vengeance 32 GB DDR3 1600
  EVGA GeForce GTX670 2048 MB
  Intel i7 - 3770 k Quad Core 3.5 GHz
  Western Digital Caviar Black 2 TB

  
  Windows 7 Blue Screen Of Death

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7601.2.1.0.256.1
  More information about the problem:
  BCCode: 124
  BCP1: 0000000000000000
  BCP2: FFFFFA801EA3E028
  BCP3: 00000000B 2000000
  BCP4: 0000000081000402
  OS version: 6_1_7601
  Service Pack: 1_0

  TSM

  This is called BCC124 and is linked to the material.  Since Genuine Intel is referenced, I'd start by running a cpu stress test

  Try this free stress test: http://www.mersenne.org/freesoft/

  Prime95 Setup program;
  -Extract the contents of the zip file into a directory of your choice
  -Double-click on the executable file
  -Select "all stress testing.
  -Select the test of 'Blend '.  If you have already run MemTest overnight, you can run the test of "Small FFFS" instead.
  "Number of threads of torture test run" must equal the number of processors multiplied by 2 (if you use hyperthreading).
  The best way to do this is to go to the Manager of the tasks of the figure... The performance tab - and see the number of boxes that appear under the CPU usage history
  Then run the test of 6 to 24 hours - or until you get errors [b](whichever comes first)
  The selection of Test and the file stress.txt box describes the components that insists on the program.

  Stop 0 x 124 is a hardware error

  If you are overclocking try to reset your settings to standard processor and see if that helps.

  If you keep getting the BSOD here are things more than you may want.
  This is usually hardware related, defective heat, memory or processor even if it is "possible" he is associated (rare) driver.
  
  Stop 0 x 124 - what it means and what to try
  Synopsis:
  A "stop 0 x 124" is fundamentally different from many other types of bluescreens because it arises from a complaint of material.
  Stop 0 x 124 minidumps contain very little concrete information, and it is therefore necessary to address the problem as a case of material in an unknown state of distress.
  

  Generic troubleshooting ' Stop 0 x 124 ":

  1) to ensure that none of the hardware components are overclocked. Material which is pushed beyond its design specifications - by overclocking - may malfunction in unpredictable ways.
  (2) ensure that the machine is sufficiently cooled.
  If there is doubt, open the side of the case (be aware of all the relevant conditions guaranteed!) PC and direct an electric fan squarely to the motherboard. Who will rule on most cooling problems (lack of).
  3) update all drivers related to materials: video, sound, RAID (if applicable), NIC... anything that interacts with a piece of hardware.
  It is best to run the latest drivers anyway.
  (4) update the BIOS of your motherboard according to the manufacturer's instructions and clear CMOS.

  
  Their website should provide detailed instructions on the brand and model-specific procedure.
  (5) rarely, bugs in the operating system may cause "false positives" 0 x 124 events where the hardware wasn't complaining, but Windows thought otherwise (because of the bug).
  At the time of writing, Windows 7 does not have to suffer from a defect, but it is nevertheless important to keep Windows up-to-date.
  6) trying (stress) test these hardware components that can be put to the test artificially.
  The most obvious examples are the RAM and HDD (s).
  For the RAM, use the 3 rd-party memtest86 utility to run several hours a test value. (6-8 passes to stress the ram)
  For hard drives, verify if CHKDSK /R finds any problems on (s), including "bad sectors".
  Unreliable RAM, in particular, is mortal, as well as software, and anything other than a 100% clear memory test result is cause for concern. Unfortunately, even a 100% clear result the diagnostic utilities does not guarantee that the RAM is free of any defect - only that none have been encountered during the test passes.
  7) as the last of the non-invasive troubleshooting steps, perform a "Vanilla" Windows reinstallation: just the OS itself without additional applications, games, utilities, updates, new drivers - or ANYTHING that does not come from the Windows 7 disc.
  Who stops working mitigate the problem of the 0 x 124, jump to the next step.
  If you run the "Vanilla" installation long enough to convince yourself that not a single 0 x 124 accident occurred, start installing applications and updates slowly, always stopping between successive additions long enough to get an idea of the question if the machine is still free of 0 x 124 breaks down.
  Smash back, obviously the latest addition of software may be somehow connected to the root cause.
  If the stop error 0 x 124 persist despite the above steps, and the equipment is under warranty, consider to go back and ask for a replacement that does not suffer periodic MCE events.
  Be aware that want to perform the subsequent hardware troubleshooting steps can, in some cases, void your warranty:
  (8) clean and carefully remove the dust inside the machine.
  Reinstall all memory modules and connectors.
  Use a can of compressed air to clean the RAM DIMM supports as much as possible.
  (9) If all else fails, start removing items of hardware one by one in the hope that the culprit is something non-essential that can be eliminated.
  Obviously, this type of testing is much easier if you have access to equivalent components in order to perform swaps.

  If you are in the situation to have completed all the steps above without a resolution of the symptom, unfortunately the most likely reason is that the error message is literally correct - something is fundamentally wrong with the hardware of the machine.

  
  
  More advanced reading can be found here from a MS MVP IT PRO
  http://captaindbg.com/bug-check-0x124-whea_uncorrectable_error-how-to-troubleshoot/

• "Satellite P300D-201: BSOD: irql_not_less_or_equal" and pointer reference

  The first few weeks, I got Windows 7 32 Bit on my Satellite Pro P300D 201, it worked fine. But suddenly, there was a blue screen with the label "reference_by_pointer" I've tried to stop as usual. I have not installed any new software a few days before (just a few updates "Windows Update"). Now this apears blue screen every time I try to stop. Hibernation and energy saving still work.

  But, sometimes when I connect my mobile phone "Sony Ericsson K800i" using the USB connection and the "Sony Ericsson PC Suite 6" it is "irql_not_less_or_equal" blue screen.»

  I don't know if theres something wrong with the RAM/working memory, but I can't think because this computer is brand new and it never fell down or something like that.

  I'm sorry for my bad English, I'm still learning.

  Hello

  Perhaps Windows isn't compatible with your software up-to-date and causing this BSOD. You should try to use the restore system to a previous state.

  Also have you updated the software for your mobile phone? Maybe it's not compatible with Windows 7's again. Visit the site of the factory for an update.
  I have the same phone but I m using MyPhoneExplorer which works quite well on Windows 7 but I m using the Bluetooth connection and not on the cord.

• Satellite P300D - wireless connection problems

  Good evening.

  Sorry for my bad English.

  Here's my problem: whenever I try to install my wireless modem, my computer shuts down, the blue screen before connecting off the coast with many words that I did not have time to read.

  The modem is certainly not a problem, as I tried it on another PC and it works perfectly fine.
  Can you help me?

  Hello

  If I understand correctly your problem; the BSOD (blue screen of death) appears during the installation of the software for the external Wlan modem immediately.
  Right?

  I assume you are using portable satellite P300D Win 7 on your computer.
  There may be a compatibility problem with Win 7 OS?

  > The modem is certainly not a problem, as I tried it on another PC and it works perfectly fine.
  Have you tested the modem with the other Win 7 computer?

  The other hand the Mobile supports an internal Wlan card.
  Have you tried an update of the Wlan card driver?
  To do this
  Here you will find the latest drivers:
  http://APS2.toshiba-tro.de/WLAN/

• Stop error BCCode: 124

  Hello;
  I have problem - see text type

  Signature of the problem
  Problem event name: BlueScreen
  OS version: 6.0.6002.2.2.0.256.1
  Locale ID: 1060

  Files helping to describe the problem (some files may be is no longer available)
  Mini072212 - 01.dmp
  SysData. XML
  Version.txt

  See a temporary copy of these files
  WARNING: If a virus or other security threat caused the problem, open a copy of file can harm your computer.

  Additional information about the problem
  BCCode: 124
  BCP1: 0000000000000000
  BCP2: FFFFFA80091F1030
  BCP3: 00000000F2000040
  BCP4: 0000000000000800
  OS version: 6_0_6002
  Service Pack: 2_0
  Product: 256_1
  Information about the server: 47e7912a-2006-4c97-b4c0-127a3cc93d19

  Please help - what can I do?

  Concerning
  Sebo

  Hello

  Could be heat related - try using a small fan to blow into the air intakes to see if that helps.
  It is just like it loses power or stop it in the normal way?

  Remove ALL power and reinstall all the memory cards and cables (both ends where possible).
  in fact, remove and replace - don't do not just tight. Remove the dust bunnies and clean the
  air vents. Check that fans are working (before and after opening the case). When your laptop on all the
  You can do is to reinstall the memory and clean the vents (still may try to add a small fan as a
  test).

  This sounds like material so if the above does not help you then probably need help
  a real computer store (not the leeks and the glances at a Best Buy or other stores) or the
  Support of system Maker.

  ===========================================================

  Pick up the pieces after a computer crash
  http://Windows.Microsoft.com/en-us/Windows-Vista/picking-up-the-pieces-after-a-computer-crash

  Check this thread for more information on using BlueScreenView, MyEventViewer and other
  Troubleshooting BlueScreens - top 3 responses (+ 1 other) methods.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/blue-screen-plug-and-play-detected-an-error-most/3deab2fa-4000-4136-8c78-a3d22b1db009

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
  for the office or in the Documents folder and download them from there.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive to upload collected files
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  ----------------------------------------------------------

  BCCode: 124 0 x 00000124

  This is usually heat related, faulty hardware, memory, or processor even if it is
  "possible" he is associated (rare) driver. To be able to remove ALL and reinstall all the cards, memory
  and cables (at both ends) - actually delete and replace - are not just tight. Ensure
  the system has proper ventilation - add a small fan blowing in the contributions. Carefully
  Inspect the card mother and other cards for damage. Pay attention to the fatal material
  error implicitly. You may need a computer store real (not the leeks and glances at a BestBuy
  or other BigBox stores) or system manufacturer support.

  There has been a few cases where Norton/Symantec and other antivirus/security
  programs have caused this error.

  BCCode: 124 0 x 00000124

  Bug WHEA_UNCORRECTABLE_ERROR control has a value of 0 x 00000124. This bug
  verification indicates that an unrecoverable hardware error has occurred. This bug check uses the error
  data provided by the error Architecture WHEA (Windows Hardware).

  0 x 00000124<-- read="" this="">
  * 1289.html http://www.faultwire.com/solutions-fatal_error/the-System-encountered-an-uncorrectable-Hardware-Error-0x00000124-

  =========================================

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard event viewer
  Windows. TIP - Options - Advanced filter allows you to see a time rather
  of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during ' blue screen of the.
  death ' crashes and displays information about all accidents of a table.
  Free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by drivers of old or damaged, in particular the video drivers
  However, there are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Does not work
  tell all possible driver issues).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• BCCode: 124 on a new generation of system, please help! __

  I have a new generation system, and keep getting a bbc that I fight for the difficulty and I am in desperate need of assistance.  Thanks in advance for any help that you can provide to fix this problem.

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7600.2.0.0.768.3
  Locale ID: 1033

  More information about the problem:
  BCCode: 124
  BCP1: 00000000
  BCP2: 864C78FC
  BCP3: 00000000
  BCP4: 00000000
  OS version: 6_1_7600
  Service Pack: 0_0
  Product: 768_1

  Files helping to describe the problem:
  C:\Windows\Minidump\091410-17640-01.dmp
  C:\Users\Marshall\AppData\Local\Temp\WER-31734-0.SysData.XML

  Read our privacy statement online:
  Privacy statement for Windows 7 - Microsoft Windows

  If the online privacy statement is not available, please read our offline privacy statement:
  C:\Windows\system32\en-US\erofflps.txt

  ==================================================
  Dump file: 091410-17640 - 01.dmp
  Crash time: 2010-09-14 23:32:29
  Bug Check String:
  Bug check code: 0 x 00000124
  Parameter 1: 0x00000000
  Parameter 2: 0x864c78fc
  Parameter 3: 0x00000000
  Parameter 4: 0x00000000
  Caused by the driver: ntoskrnl.exe
  Caused by the address: ntoskrnl.exe + 322493
  File description: NT kernel & system
  Product name: Microsoft® Windows® Operating System
  Company: Microsoft Corporation
  File version: 6.1.7600.16617 (win7_gdr.100618 - 1621)
  Processor: 32-bit
  Computer name:
  Full path: C:\Windows\Minidump\091410-17640-01.dmp
  Number of processors: 3
  Main version: 15
  Minor Version: 7600
  ==================================================

  ==================================================
  Dump file: 091410-18703 - 01.dmp
  Crash time: 2010-09-14 23:25:48
  Bug Check String:
  Bug check code: 0 x 00000124
  Parameter 1: 0x00000000
  Parameter 2: 0x85afc8fc
  Parameter 3: 0x00000000
  Parameter 4: 0x00000000
  Caused by the driver: ntoskrnl.exe
  Caused by the address: ntoskrnl.exe + 322493
  File description: NT kernel & system
  Product name: Microsoft® Windows® Operating System
  Company: Microsoft Corporation
  File version: 6.1.7600.16617 (win7_gdr.100618 - 1621)
  Processor: 32-bit
  Computer name:
  Full path: C:\Windows\Minidump\091410-18703-01.dmp
  Number of processors: 3
  Main version: 15
  Minor Version: 7600
  ==================================================

  ==================================================
  Dump file: 27187 091110 - 01.dmp
  Crash time: 2010-09-11 17:21:14
  Bug Check String: PAGE_FAULT_IN_NONPAGED_AREA
  Bug check Code: 0 x 00000050
  Parameter 1: 0xffffff8b
  Parameter 2: 0x00000001
  Parameter 3: 0x92a956d5
  Parameter 4: 0x00000000
  Caused by the driver: tcpip.sys
  Caused by the address: tcpip.sys + f9438
  Description of the file: TCP/IP Driver
  Product name: Microsoft® Windows® Operating System
  Company: Microsoft Corporation
  File version: 6.1.7600.16385 (win7_rtm.090713 - 1255)
  Processor: 32-bit
  Computer name:
  Full path: C:\Windows\Minidump\091110-27187-01.dmp
  Number of processors: 3
  Main version: 15
  Minor Version: 7600
  ===============================================

  I use a triple-core processor AMD Athlon II 440, MSI NF750-G55 mainboard, Corsair xms 2 gig memory, Hitachi Desktar 1 TB disk sata hard.

  Once again, thank you for your help in advance.

  You have a fatal hardware problem :

  Bug Check 0 x 124: WHEA_UNCORRECTABLE_ERROR - This bug check indicates that a fatal hardware error occurred.

  Please copy the files of the dmp to the C:\Windows\Minidump folder first on your desktop, zip dmp all in 1 zip file and download the zipfile to your Skydrive [1] and post a link here, so that I can look at landfills.

  André

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02db-4665-993a-08d865088d65 [1]

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

  André,

  Thanks for your reply, but I think that I have fixed my problem.  When I built the system, I never could the 2nd strip of memory to work.  It would not just start my system at all.  I thought all along that I had a problem of memory based on my last sentence.  I finally went out and bought another brand memory and did not have a BSOD on the last 2 days.

  Thanks again for trying to help me.

• BCCode: 124

  My computer has been restarted recently about once a week during the night when it is idling. I'll wake up and notice that it has restarted, at first I thought he was just updated. I know realize there is something wrong, however! I started playing Starcraft II: Heart of the swarm today and it stopped after the first game. Hoping that it was just a fluke I started my computer again and after the first game, the same thing, full stop. Except this time I was met with a message 'windows has recovered from an error' when I started upward. Here's the message as follows:

  Signature of the problem:

  Problem event name: BlueScreen

  OS version: 6.1.7601.2.1.0.256.1

  Locale ID: 1033

  More information about the problem:

  BCCode: 124

  BCP1: 0000000000000000

  BCP2: FFFFFA8002C52038

  BCP3: 0000000000000000

  BCP4: 0000000000000000

  OS version: 6_1_7601

  Service Pack: 1_0

  Product: 256_1

  Files helping to describe the problem:

  C:\Windows\Minidump\031213-21484-01.dmp

  C:\Users\Robert\AppData\Local\Temp\WER-133796-0.SysData.XML

  Read our privacy statement online:

  http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  If the online privacy statement is not available, please read our offline privacy statement:

  C:\Windows\system32\en-US\erofflps.txt
  What should I do?
  Stop 0 x 124 is a hardware error
  If you are overclocking try to reset your settings to standard processor and see if that helps.
  If you keep getting the BSOD here are things more than you may want.
  This is usually hardware related, defective heat, memory or processor even if it is "possible" he is associated (rare) driver.
  
  Stop 0 x 124 - what it means and what to try
  Synopsis:
  A "stop 0 x 124" is fundamentally different from many other types of bluescreens because it arises from a complaint of material.
  Stop 0 x 124 minidumps contain very little concrete information, and it is therefore necessary to address the problem as a case of material in an unknown state of distress.
  

  Generic troubleshooting ' Stop 0 x 124 ":

  1) to ensure that none of the hardware components are overclocked. Material which is pushed beyond its design specifications - by overclocking - may malfunction in unpredictable ways.
  (2) ensure that the machine is sufficiently cooled.
  If there is doubt, open the side of the case (be aware of all the relevant conditions guaranteed!) PC and direct an electric fan squarely to the motherboard. Who will rule on most cooling problems (lack of).
  3) update all drivers related to materials: video, sound, RAID (if applicable), NIC... anything that interacts with a piece of hardware.
  It is best to run the latest drivers anyway.
  (4) update the BIOS of your motherboard according to the manufacturer's instructions.
  Their website should provide detailed instructions on the brand and model-specific procedure.
  (5) rarely, bugs in the operating system may cause "false positives" 0 x 124 events where the hardware wasn't complaining, but Windows thought otherwise (because of the bug).
  At the time of writing, Windows 7 does not have to suffer from a defect, but it is nevertheless important to keep Windows up-to-date.
  6) trying (stress) test these hardware components that can be put to the test artificially.
  The most obvious examples are the RAM and HDD (s).
  For the RAM, use diagnostics from built-in memory (run MDSCHED) or the utility memtest86 3rd - party to run plenty of evidence of hours of testing.
  For hard drives, verify if CHKDSK /R finds any problems on (s), including "bad sectors".

  
  Unreliable RAM, in particular, is mortal, as well as software, and anything other than a 100% clear memory test result is cause for concern. Unfortunately, even a 100% clear result the diagnostic utilities does not guarantee that the RAM is free of any defect - only that none have been encountered during the test passes.
  7) as the last of the non-invasive troubleshooting steps, perform a "Vanilla" Windows reinstallation: just the OS itself without additional applications, games, utilities, updates, new drivers - or ANYTHING that does not come from the Windows 7 disc.
  Who stops working mitigate the problem of the 0 x 124, jump to the next step.
  If you run the "Vanilla" installation long enough to convince yourself that not a single 0 x 124 accident occurred, start installing applications and updates slowly, always stopping between successive additions long enough to get an idea of the question if the machine is still free of 0 x 124 breaks down.
  Smash back, obviously the latest addition of software may be somehow connected to the root cause.
  If the stop error 0 x 124 persist despite the above steps, and the equipment is under warranty, consider to go back and ask for a replacement that does not suffer periodic MCE events.
  Be aware that want to perform the subsequent hardware troubleshooting steps can, in some cases, void your warranty:
  (8) clean and carefully remove the dust inside the machine.
  Reinstall all memory modules and connectors.
  Use a can of compressed air to clean the RAM DIMM supports as much as possible.
  (9) If all else fails, start removing items of hardware one by one in the hope that the culprit is something non-essential that can be eliminated.
  Obviously, this type of testing is much easier if you have access to equivalent components in order to perform swaps.

  If you are in the situation to have completed all the steps above without a resolution of the symptom, unfortunately the most likely reason is that the error message is literally correct - something is fundamentally wrong with the hardware of the machine.

• Satellite P300D-13N and Installation of XP problems (Sata driver)

  Hello

  I have some problems with my XP Downgrade.
  I tried to integrate the Intel Storage Manager driver in my XP CD, but unfortunately it did not work.
  Probably because I've been incorporating all THE drivers, who were available, not only who should work for my chipset.
  Anyway, in one of the threads of this forum, there is a link to [THIS how-to | http://aps2.toshiba-tro.de/kb0/TSB85017Z0000R01.htm] and I think I found my problem...

  [Here: http://s5.directupload.net/images/080904/2eptrpzs.jpg] is a screenshot of my (sorry to make it in German) Device Manager preinstalled Vista.
  As you can see, there is no information about the Version of controller.

  So my question is, WHAT chipset is built into my laptop, because it is due to the fact that Intel drivers do not work AND there is no information on any Intel-inverter speed, I have no idea, I have to integrate into the XP CD to get my XP Installation working drivers. :(

  Help :(

  Thank you

  Laptop: Satellite P300D-13N PSPDCE

  Hello

  According to the specifications of the laptop, your laptop has an AMD RX780M chipset. Processor is AMD Turion Dual Core RM - 70 (2.0 GHz).

  I hope this info will help you.

  Good bye

• Satellite P300D - 15 c is very slow to start WMI

  Hello

  My pc (Satellite P300D - 15 c) is very slow at startup.
  When I look in the newspaper, there is a WMI wich tooks 2 minutes East service delivered with an error.

  After that, my pc on the screen fr jumps 'welcom' starts normally.

  So I turn the WMI service, but that there are other mistakes after the full boot (tosipcsrv.exe close).

  Is there another type of solution, except turn the WMI service?

  Sorry for my bad English,
  If you can answer me in Dutch or English basic ;-)
  With sincere friendships.

  Johan Nijsse

  Here's the (Dutch) log of the WMI problem:

  Logboeknaam: Application
  Bron: Microsoft-Windows-WMI
  Reference: 2009-04-06 22:52:53
  Gebeurtenis-id: 10
  Taakcategorie: Geen
  Level: who cares
  Trefwoorden: Klassiek
  Gebruiker: Derby
  Computer: PC_Fam_Nijsse
  Description:
  Gebeurtenisfilter met query SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA 'Win32_Processor' AND TargetInstance.LoadPercentage > 99 kan niet worden van naamruimte //./root/CIMV2 vanwege opnieuw doing 0 x 80041003. Mogelijk worden er geen gebeurtenissen via said thing totdat het clean filter is corners.
  Gebeurtenis-XML:
  
  
  
  10
  0
  2
  0
  0
  0 x 80000000000000
  
  1961
  
  
  Application
  PC_Fam_Nijsse
  
  
  
  ./root/CIMV2
  SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA 'Win32_Processor' AND TargetInstance.LoadPercentage > 99
  0 x 80041003
  
  

  Very good thread on slow start up you will find under http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=134947

  It will be interesting for you.

• Satellite P300D-110 does not recognize the 9 cell battery

  Can someone help me with a bios version of work?

  Running v2.80 with 32-bit vista, in this configuration, the battery is not recognized. I read in a German forum I need v3.00 or higher there is no newer version on the download section that works on vista 32 bit.

  Hi mate

  Your laptop P300D-110 belongs to the series of PSPD4E.
  For this series, you will find only 2.80 BIOS.
  There are other satellite P300D as PSPD8E or PSPDCE series.
  3.30 BIOS is available for this series.

  I think that the problem is not related to the BIOS if you had no problems in the past, so I think that your battery is defective.

• Satellite P300D 10V - problem with TV OUT

  Hello!

  I have a card ATI HD3650 in my Toshiba Satellite P300D 10V model and I can't use my TV out!
  It does not work! How to start!

  I use a newer driver of origin! With the previous driver output TV not too worked!

  Kind regards!

  Hello

  The laptop seems to support a 4pijn s-video port and HDMI port.
  Which port you use to connect to the TV?

  You can use both and it only depends on the available on television port.
  Choose the right channel on the TV and then use the FN + F5 key combination to switch to the TV out.

• When I touch my Satellite P300D support component turns

  Hello

  I got my Satellite P300D for awhile now however when I try to clean up when its been turned off and I have spend my sheet over the media group above keyboard turns itself on which is annoying when you're trying to clean it up.
  No one knows how to stop it turning I would decide when to turn it on lol

  Any help gratefully received

  Kind regards

  Alan

  Hello

  Since when did you notice this problem?
  Have you installed the latest version of the BIOS?

  On this behavior, I found a similar thread:
  http://forums.computers.Toshiba-Europe.com/forums//thread.jspa?MessageID=231754

  So I can say this normal behavior of s is on when you press the button mute.