Satellite P300D-13N and Installation of XP problems (Sata driver)

Similar Questions

• Satellite P300D Pro and Windows 7 - LCD problem

  Hello

  I update my Toshiba Satellite P300D from Vista to Windows 7 Pro and the only problem is when I change rezolution of 1440-900 to 1280-800 or below my screen shrinks
  Ye and 1 last thing I have hiden partition recovery, but now I can't start to set Vista.

  Anyone know what to do about it?

  Have you noticed a few problems with the native resolution of the poster?
  It makes sense when you use non-native resolution LCD will be somewhat different.
  So if the image is perfect with a native resolution, everything is OK.

  If you did own option of recovery installation Win7 will be gone and you will not be able to install HDD recovery again.

• Installation satellite P300D - 12l and WXP

  HY

  I have Windows Vista on my laptop Satellite P300D - 12l and I would like to install Windows XP.
  Is it possible to make and have?
  If you know where to find the drivers please write.

  Akuma is right. Your laptop belongs to the models PSPDCE and WXP drivers are available for this purpose.

  Check it out!

• Satellite P300D-14 and Win8 - cannot install optional update

  I have a Toshiba Satellite P300D-14th with Windows 8 Pro.
  Hard drive is not original (all 2 disc HARD original died)-now this is Seagate Momentus ST9500325AS.

  In the updates of Windows, I put in optional day - + AMD - storage controller - AMD Sata Controller +.
  [https://s017.radikal.ru/i408/1305/ee/0874c8831d27.jpg]
  I try to install it, then mobile must be restarted - I do restart, load until Windows starts... and restart again, and then it displays the message that it could not start Windows, than restarting again and Diagnostic Utility starts.
  This notice of restore (restore point). I do restore and the laptop starts as usuall.

  So, question is - why I can't install this update? and is there a solution (except do not install).

  P.S.: Sata remains AHCI in the BIOS for the controller.

  P.P.S.: drivers I found (thanks to Everest (AIDA64)):
  (1) standard dual channel PCI IDE Controller, driver date: 21.06.2006, driver version: 6.2.9200.16548
  (2) standard SATA AHCI Controller, driver dat: 21.06.2006, driver version: 6.2.9200.16548
  (3) controller storage in the Microsoft space, pilot dat: 21.06.2006, driver version: 6.2.9200.16548
  (4) ST9500325AS, driver dat: 21.06.2006, driver version: 6.2.9200.16384

  > So, question is - why I can't install this update? and is there a solution (except do not install)

  From my point of view, there will be a compatibility problem.
  The P300D is a little older and you use Win 8.
  AFAIK P300D isn t Win 8 supported... of course, this does not mean that you can not use Win 8 on this unit, but it might be possible that not all drivers are fully compatible, however, it's just an idea

• Hi.I download Microsoft Security Essentials and installation becomes a problem with the code: 0 x 80070643. If you can help me...

  Hi.I download Microsoft Security Essentials and installation becomes a problem with the code: 0 x 80070643. If you can help me...

  Support Microsoft Security Essentials forums
  http://social.answers.Microsoft.com/forums/en-us/category/MSE

  Can I install Microsoft Security Essentials [or any other anti-virus/anti-spyware application] to clean my already infected computer?
  http://social.answers.Microsoft.com/forums/en-us/msescan/thread/87058857-D181-4019-a723-efd9a49d9275

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Satellite P300D 10V - how can I update the display driver?

  I have a Satellite P300D 10V and there ATI radeon hd 3xxx series display panel. I bought Starcraft 2 and there was an error message: that the display driver is outdated.

  I went on ati.com. They say I have to get the driver from Toshiba. I went to Toshiba, had the driver. When you try to install it says no components to install. I uninstalled the ati driver and tried again. The same thing.

  Now I don't have driver for the graphics card. How can I install the driver?

  Help, please!

  Hey,.

  This means that you have uninstalled the old display driver, but now, you are not able to install the latest version of Toshiba?
  Well, what OS do you have?

  Before installing the new display driver, you should decompress all the files. Then run the setup.exe file.
  If you get the same error message, try to install the driver through the Device Manager.

• Satellite P300D - 15 c - installation of Windows XP

  Hello

  Can someone please help me install windows xp to my Satellite P300D - 15 c?
  The AHPI option must be changed to a compatible?

  How can I solve this problem?

  Thanks in advance!

  Hi mate

  First of all, I would like to ask if you read some threads here about the installation of Win XP on different notebook series before you posted this new thread?
  Through the forum, I see a lot of discussions about this theme!

  Generally, there are two ways to install Win XP.
  Switching mode AHCI compatible you will not have to install SATA drivers, because the SATA controller would like IDE controller.
  The second way is a little complicated. You can leave the SATA AHCI mode, but in this case you must include the SATA drivers!

  AFAIK the P300D uses the ATI and AMD chipset and therefore, you might find the SATA driver files in the graphics card driver package.

  I've included the SATA drivers using the nLite... is freetool and very well!

• Satellite P300D - 12L and PCI standard ISA bridge driver

  Hello!!!
  I just installed win XP on Toshiba Satellite P300D - 12L with all the drivers, but I have a problem. In the Device Manager on the "other devices" the foud of windows 'network controller '. In my view, is the standard ISA bridge PCI (PNP ID VEN_1002 & DEV_439D & SUBSYS_00000000 & REV_00). I search for the driver on the internet but without success.

  PLEASE HELP ME!

  THANKS IN ADVANCE

  BOBDAN

  Have you installed the LAN and WLAN cards successfully?

• Satellite P300D fell and screen dead - what now?

  Hello

  my phone fell while riding my bike home...

  When I got home she was still going to but the screen no longer works.

  It's a satellite p300d, I myself check if broken/disconnected the cables?

  What should I do?

  Thanks in advance,
  Jannick van ' t Ende

  Well, the warranty does not cover this damage because it was your own mistake.
  The Toshiba ASP would be able to replace the screen, but you will have spent the money for this service.
  The screens are not cheap about 300-360Euros.

  But you can ask the ASP.
  Contacting ASP guys your country and ask for more details and costs of the service.

  Good luck

• Vostro 200 and Installation of XP problem

  Hi, I bought a Vostro 200 with Vista mini recently.  After I got it, I tried to install some software I have and faced many problems.  So now I'm trying to reformat the hard drive and install XP on it.  I have an old XP SP2 CD of previous computer purchase.  I booted from the CD and it looks like it to load things, and then the blue screen of death that presented themselves.  The stop error is 0x0000007B.

  My question is how to install XP on Vostro 200?  I have XP SP2, XP SP3 do I need? or a few other drivers?  I have no disk on this machine so if other drivers are required for installation, how to do? F6/floppy would not be an option for me.

  Thanks in advance for any help!

  Jason

  Sounds like the SATA driver.

  Check in your BIOS for the SATA operation mode.   If it is in AHCI mode, change the ATA, then XP should be able to recognize the drive.

  However, I must warn you: If you are using XP CD was originally an OEM version that is installed on another computer, it is a violation of the license agreement to install it on another system.   An OEM license is valid only for the computer, it has been installed on and cannot be transferred. only one copy retail can do.  The only exception is if you have purchased the Vostro with Vista Business or Ultimate, in which case you have right to demotion to use your license Vista with XP.

• Satellite U840-10N - Windows Installation can not see any drive

  Hi all, this is my first post so I hope that I chose the right place to post in.

  I just bought a new Toshiba Satellite u840-10n ultrabook. He joined WIndows 7 Home Premium 320 GB HHD + SSD of 32 GB.

  Even though I prefer Linux, I need Windows because of Microsoft Visual Studio. I downloaded Visual Studio (legally throught dreamspark.com), but it looks like it has some issues. In particular, I can't create any project.

  After searching the Web for this problem, I decided to try reinstalling Windows, hoping that this will solve the problem, and here's the point.

  Installation process of Windows 7 can not find any drive. I looked through the web a lot to solve this problem, even, without understanding.

  I read a lot of other people had the same problem. I tried different ways and I'm about to throw the laptop out the window.

  Is there anyone can help me?

  See you soon,.

  Marco Galassi

  You need to load the SATA driver before you start the installation of the OS. Try it please use the files from http://www.fileswap.com/dl/igfH0jVrap/

  I used it on my Win8 preinstalled satellite to install Win7 64 bit. Copy it to USB and install from there.
  Please post comments.

• Satellite P300D-12y - XP does not recognize the HARD drive

  Hello

  I want to install win xp on my new laptop.
  So I downloaded the toshiba page display driver. I use the driver sata this package to create a new installation disc.

  But the installation of win xp has not identified, my hard drive.
  Now, iam looking for the good driver-sata.
  The full package name is: ATI8.479.0.0000.zip

  Here is the content of the txtsetup.oem in the sata-file:

  ; This file installs the SiI 3112 serial ATA RAID in the framework
  ; installation text on Windows NT, Windows 2000, Windows XP,.
  ; and Windows Server 2003.
  ;
  ; Copyright (C) 2002-2003 by Silicon Image, Inc.
  ; All rights reserved

  Discs
  Disk1 = "Silicon Image SiI 3 x 12 SATALink Driver Installation Disk",\si3112.sys,\

  Default values
  SCSI = Si3112_XP

  SCSI ; Section HwComponent
  Si3112_XP = "Silicon Image SiI 3 x 12 SATALink Controller for Windows XP/Server 2003"
  Si3112_NT = "Silicon Image SiI 3 x 12 SATALink Controller for Windows NT 4.0 and 2000"

  Files.SCSI.Si3112_XP
  Driver = disk1, si3112.sys, Si3112
  INF = disk1, SI3112.inf
  ;; Catalog = disk1, Si3112.cat

  Files.SCSI.Si3112_NT
  Driver = disk1, si3112.sys, Si3112
  INF = disk1, SI3112.inf
  DLL = disk1, SilSupp.cpl
  ;; Catalog = disk1, Si3112.cat

  HardwareIds.SCSI.Si3112_XP
  ID = 'PCI\VEN_1095 & DEV_3112 & SUBSYS_31121095', 'Si3112.
  ID = 'PCI\VEN_1095 & DEV_3112 & SUBSYS_34238086', 'Si3112.
  ID = 'PCI\VEN_1095 & DEV_3112 & SUBSYS_311215D9', 'Si3112.
  ID = 'PCI\VEN_1095 & DEV_3112 & SUBSYS_B0021458', 'Si3112.
  ID = 'PCI\VEN_1095 & DEV_3112 & SUBSYS_01661028', 'Si3112.
  ID = 'PCI\VEN_1095 & DEV_3112 & SUBSYS_82141033', 'Si3112.
  ID = 'PCI\VEN_1095 & DEV_3512 & SUBSYS_35121095', 'Si3112.
  ID = 'PCI\VEN_1095 & DEV_3512 & SUBSYS_01661028', 'Si3112.
  ID = 'PCI\VEN_1002 & DEV_436E & SUBSYS_436E1002', 'Si3112.

  HardwareIds.SCSI.Si3112_NT
  ID = 'PCI\VEN_1095 & DEV_3112 & SUBSYS_31121095', 'Si3112.
  ID = 'PCI\VEN_1095 & DEV_3112 & SUBSYS_34238086', 'Si3112.
  ID = 'PCI\VEN_1095 & DEV_3112 & SUBSYS_311215D9', 'Si3112.
  ID = 'PCI\VEN_1095 & DEV_3112 & SUBSYS_B0021458', 'Si3112.
  ID = 'PCI\VEN_1095 & DEV_3112 & SUBSYS_01661028', 'Si3112.
  ID = 'PCI\VEN_1095 & DEV_3112 & SUBSYS_82141033', 'Si3112.
  ID = 'PCI\VEN_1095 & DEV_3512 & SUBSYS_35121095', 'Si3112.
  ID = 'PCI\VEN_1095 & DEV_3512 & SUBSYS_01661028', 'Si3112.
  ID = 'PCI\VEN_1002 & DEV_436E & SUBSYS_436E1002', 'Si3112.

  Config.Si3112
  value = parameters\PnpInterface, 5, REG_DWORD, 1
  value = ProblemDevices, "", REG_SZ, «»
  value = 'Maxtor 4D060H3 DAK05GK0', ProblemDevices, REG_SZ, ' "MaxMode = UDMA-5".
  value = ProblemDevices, REG_SZ, 'ST320012AS', 'Mod15Write '.
  value = ProblemDevices, REG_SZ, 'ST330013AS', 'Mod15Write '.
  value = ProblemDevices, REG_SZ, 'ST340017AS', 'Mod15Write '.
  value = ProblemDevices, REG_SZ, 'ST360015AS', 'Mod15Write '.
  value = ProblemDevices, REG_SZ, "ST380023AS', 'Mod15Write '.
  value = ProblemDevices, REG_SZ, 'ST3120023AS', 'Mod15Write '.
  value = ProblemDevices, REG_SZ, 'ST340014ASL', 'Mod15Write '.
  value = ProblemDevices, REG_SZ, 'ST360014ASL', 'Mod15Write '.
  value = ProblemDevices, REG_SZ, 'ST380011ASL', 'Mod15Write '.
  value = ProblemDevices, REG_SZ, 'ST3120022ASL', 'Mod15Write '.
  value = ProblemDevices, REG_SZ, 'ST3160021ASL', 'Mod15Write '.

  Please can someone help me?
  Welcome them
  Matthias

  If you want to install Win XP and then access the BIOS settings, the compatible SATA AHCI mode and save the changes.

  Then start using the Win XP disk and install the OS.

  All that s!

• Satellite C665D - the second time the same problem HARD drive.

  I have a laptop C665D. Eight months after I buy, I had hard drive problem (reallocated sector count-> value about 2000!).
  So I send to the service and got with the new hard drive.

  And now, after 7 months, but I have the same problem, (down hard drive).

  My question is why this happens two times, this same defect?
  Anyone had this same problem?
  Is a problem with this series of laptops?
  Can I do something to avoid damage to the next (third) disc?

  Thanks for any help.

  > So my question is why this happens two times, this same defect?

  Any HARD drive is going to die sooner or later, the HARD drive is not reusable part.
  Read and write data to the HARD disk would cause the head moving in many cases, the disk dies because of the head crash.
  Moving the laptop while the disk is in use would affect the functionality of the HARD drive.

  On my laptop I have a utility called installed HARD disk protection tool.
  HDD Protection detects the vibrations, shocks and similar signs in the PC and the disk head moves automatically to a safe position to reduce the risk of damage that might be caused by the contact of the head-to-disk.

  Advise to use such tool too

  By the way: HARD drive problems have nothing to do with the series of laptop

• Installation of a dual boot for XP on a Vista - XP installation computer forget the SATA drive after restart required #1

  Hello

  I'm trying to set up a dual-boot XPpro on my Vista machine.  I found the instructions detailed at various locations.  I prepared a score of 30G on my SATA drive and booted from my XPpro and XPpro (SP2) retail drives.  The score is quite small because I have only use for some applications.

  I have the following problem and I wonder if anyone can help.  The disk and partition is by my SP2 disc, but it's ok that BONE is not used on any other machine.

  I can choose the new partition as the location for the new installation of XP.

  Installation gets to the point where the first reboot is required, then at startup, I'm stuck on the option 'press any key to boot from the CD-ROM.  I assume that the reader is not detected.  If I try to start from scratch, I get the warning that the new partition already has an operating system on it, but I can reformat and move forward, then arrive at the startup problem re.

  There is no XP drivers for my Board, but I can not install them because they are on CD and the only option to load the specific drivers in the first part of install required has a diskette is in the drive, and of course I don't have a floppy drive.

  I then use the Startup Repair in Vista I can't move to the stage where XP is installed in fact correctly.

  Any help very welcome!

  Paul

  Hello

  I made a disc of slipstream with nLite as suggested, my sata drivers included but still could not circumvent this problem.  Installation kept insisting that they had to come from A:

  Rather than taking the box to bits I read from the link posted by Michael Murphy, once again and found the answer of Taydius on 250/1 posts.

  http://www.syschat.com/dual-boot-Vista-XP-Vista-already-26-1946.html

  Problem solved by installing EasyBCD in Vista, it points to the new partition with the inaccessible XP and reboot and selection, installation on board as usual.

  Dual boot now works fine.

  Thanks for the help!

  Concerning

• Satellite A100 - 02 M - cannot find the correct SATA driver

  Hello

  I have an old laptop Toshiba Satellite running Vista Home Edition.
  I would like to downgrade this machine to work with the XP operating system.

  I have a real, but rather old, CD Windows XP Pro SP1. I also have XP Sp2 and SP3 downloads.
  I searched the web and understand that I need to download the final medium of Storage Manager XP9 Intel (Matrix)

  Package from your webpage.at http://pc-support.toshiba-europe.com/drivers/.
  I have visited this Web page and downloaded the XP drivers for the laptop.

  However, I am unable to find (or determine) the subfolder Chipset appropriate to the F6flpy directory, I have
  understanding would allow me to add a storage from a floppy driver.
  To be honest, I'm not sure how to proceed here!

  Details of the laptop: Satellite A100 - 02 M
  Model No. : PSAANE-04U03EEN
  Serial No.: 64Q 372 464

  Before I try to run the upgrade, I wanted to make sure that if everything goes wrong, I could go back to Vista.
  Therefore, before you start, I tried to run the program of re - install. I pressed F8 during startup, as
  educated and after entering username and password have reached the screen offering me options. I tried the "Restore to an earlier Date" option and that works well. However, when I try the "reinstall the OS", nothing happens.

  I checked the HD that is partitioned with the C partition and also the hidden partition, size 1.5 G labeled 'Simple Basic', 'in good condition (EISA Configuration)'; the other partition is labeled NTFS. As far as I can remember, when I asked John Lewis, when I bought the PC, they said that there is no backup discs.

  You have any suggestions.

  Thank you very much in advance for any help.
  HJBbradders

  Hello

  I put t know if this will help but check it please http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=35787&tstart=0
  Check the s display Niko and try to use the SATA drivers you can download from here.

  If it will not hep let us know.