Satellite P50 - C - questions mouse Touchpad

Similar Questions

• Satellite P50 - MS Bluetooth mouse disconnects frequently

  Hello

  I am owner of a P50 Satellite running Windows 8.1
  I use with it that a Microsoft Sculpt comfort mouse connected via bluetooth

  This mouse works OK with my old computer (running Windows 7) happens

  Since I installed it on the Toshiba, I often have a total mysfunctionnement:
  -The does'nt of the mouse work not at all
  -It is seen in devices and detected as "working properly".

  In this case, the only solution I have is to remove the configuration and pair it again with computers.

  This problem occurs with varying frequency, from 30 seconds to several hours, I noticed that, when the computer is still running, without action on it, the mouse can remain active for hours but, when I use the computer, it most frequently disconnects

  I wonder if this may have to do with the proximity of my smartphone (NExus 4), which has the bluetooth still offshore, but maybe can send waves that disturb bluetooth... but I never had any problems before with the Dell Vostro computer!

  Does anyone have an idea or a solution?

  Concerning

  I m wondering why you did not contact or visit Microsoft support pages or forums to check if this mouse is compatible and if she supports the new Windows 8.1

  You said you have tested this mouse with other mobile and Win 7.
  Well well, Windows 7 isn't Windows 8.1. There are big differences between the system and especially the software and drivers are not fully compatible.

  I found the support of MS Sculpt Comfort Mouse page
  http://www.Microsoft.com/hardware/en-us/d/sculpt-comfort-mouse
  I found the software for iOS, Win 7 and Win 8 but nothing win 8.1

  So probably it s a problem of compatibility between the mouse and the Win 8.1

• Satellite C-50-questions of TouchPad

  Hello world.

  Yesterday I bought a brand-new C50 of Satellite. Everything works fine, except the TouchPad allow me to scroll. Time scrolling with two fingers and a finger on the side do not work. I tried to update the drivers etc, but apparently they are up-to-date. I don't know what else to do. It's really annoying.

  Thanks in advance!

  Hello

  Have you checked all the settings and options of the touchpad?
  Please do. try changing different parameters, including the option of scrolling and check the functionality of the touchpad.

• Mouse Touchpad S50T-A satellite stuck to scroll only

  My mouse Touchpad S50T-A won't do anything but scroll in each screen, I can not click on new tabs, emails, etc, all I can do is roll around the screen, I'm in. Help, please.

  Hello

  Your S50T-a Satellite seems to bear a Touchpad with some additional features such as click pad with gestures multitouch control supporting the different features of scroll, zoom and launch at hand.
  You can disable this and other features
  Control Panel-> mouse-> setting-> setting button tab

  Here you can find detailed step by step instructions how to disable these options
  [How to change the settings of the Synaptics touchpad | http://aps2.toshiba-tro.de/kb0/HTD3101Z30000R01.htm]

• Mouse - touchpad and USB - HID - does not work properely on Satellite L40-139

  The mouse is very unstable. Mouse touchpad both usb do not work properely, but the touchpad a little better. It happens that, even if the mouse using USB to the point does not move, while the left and right button are always react.

  It is brand new computer (L40-139) with initially installed Windows Vista. How can I solve the problem?

  It is very disturbing. Thank you.

  Hello

  have you ever tried to recover your machine, which means a complete reinstallation of your system? First: to exclude the material errors, you must perform this step, and if the error persists, then I suggest you to contact a service partner chartered for a checkup of material and a repair action.

  If the problem occurs after reinstalling windows, visit the following link to find the closest to the ASP available in your country:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

  Greetings

• Satellite P50 - annoying problem Synaptics Mousepad

  Hey guys,.

  I bought a Satellite P50 the other day and I noticed something annoying pretty fast.

  Every time I use the touchpad keyboard stops working. Now, I understand, he's probably so that people don't accidentally press the key while typing, but as this does play video games (which use wasd to move) quite difficult, I really want to turn this feature off.

  I tried to update on the latest drivers and ranging in the mouse property settings and the device and research into the properties, but I can't seem to find what I need to disable.

  I tried to search the web, but do the above is all I really got.

  Can someone point me in the right direction please?

  Thanks in advance

  > Whenever I use the keyboard touchpad no longer works

  You mean while typing?

  There is an option called hide the pointer while typing
  In my case, I could activate and deactivate this option in:
  -> Panel-> mouse-> pointer options Hide pointer while typing

  There is also another option called disable peripheral internal scorecard (touchpad) when the (USB mouse) external USB pointing device is attached

  If this option is checked, the touchpad wouldn't work if you want to use the USB mouse.
  This can be found in:
  Control Panel-> mouse-> device settings

• Mouse TouchPad reacts not - Synaptics PS/2 Port TouchPad

  Hi all
  Since yesterday, the integrated TouchPad mouse does not react anymore. In properties, it says "the device is working properly", but it is not...
  I am now using an external mouse.
  How to restore the mouse TouchPad? When I open the Control Panel, I get the option to uninstall the Synaptics driver. That I should?
  Thanks for your help!

  Heleen

  Hello

  What model of laptop do you have?
  Thanks for posting this info always!

  Regarding your question.
  First of all, you should try to remove the old driver for touchpad and after you have downloaded the latest version of the driver for touchpad of Toshiba European page driver try to reinstall!

  Work

• Satellite P50-B-103 - to connect my HDMI output on a VGA monitor

  Hi all

  I just bought a satellite * P50-B-103 *, which has a HDMI output and I want to connect it to an external VGA monitor.

  I thought that I just need to buy a HDMI - VGA Converter, but the buyer was told that Toshiba, unless this model, is not ready to connect to a VGA monitor, although I use a converter.

  Is it true or I can connect my laptop to the vga monitor using the converter?

  Thanks in advance,

  Charly

  It remains that HDMI provides digital signal and analog support port VGA (RGB) signal.

  To be honest, I read a lot of articles on these adapters and converters, but in many cases, these converters are useless.

  So it s no matter if your laptop was manufactured by Toshiba or another manufacturer.
  ITSA the question of the standard of caught signals supported by each port.

• I accidentally disabled my mouse/touchpad? (on another laptop... Sony Vaio) I can't move my cursor. How it back on?

  I accidentally disabled my mouse/touchpad?  (on another laptop... Sony Vaio) I can't move my cursor.  How it back on?

  Hi Jakes,

  Please go to the Microsoft Community Forums.
  Description of the question, we understand that you are not able to move the cursor with touchpad.
  Let us move forward and help the issue.

  If you could answer a few questions that would help us resolve this problem:

  "1. What do you mean by" ","I accidentally disabled my mouse/touchpad?

  2. where did you make changes in the computer before the show?

   

  We invite you to check out the link and follow the steps in the article:

  What if the touchpad is not working properly, works without touching, functions intermittently or erratically or is completely insensitive?
  http://www.Sony.co.in/support/FAQ/409262

   

  I hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further.

• Problem starting after the installation of the NTI Echo Satellite P50-B-11V

  Hi guys. I have problems to start mid laptop computer (Toshiba Satellite P50-B-11V, F04236S) after the installation of NTI Echo3 to migrate the data from the drive HARD original to a new SSD (Toshiba 480 GB Q300 series).

  Error: file/echo not found boot/initrd.gz. Pilot pata-platform...
  Kernel panic not syncing VFS: Don't mount rootfson unknown - black (0,0).

  Anyone facing this problem? Please advice if you have the time.
  I tried several times to repair Windows (F12 key) and I have tried different ways to migrate data but the problem even after reboot.

  Thanks fo your time.

  Posted by marianbur
  

  Hi guys. I have problems to start mid laptop computer (Toshiba Satellite P50-B-11V, F04236S) after the installation of NTI Echo3 to migrate the data from the drive HARD original to a new SSD (Toshiba 480 GB Q300 series).

  Error: file/echo not found boot/initrd.gz. Pilot pata-platform...
  Kernel panic not syncing VFS: Don't mount rootfson unknown - black (0,0).

  Anyone facing this problem? Please advice if you have the time.
  I tried several times to repair Windows (F12 key) and I have tried different ways to migrate data but the problem even after reboot.

  Thanks fo your time.

  Dear marianbur,

  New laptop having same problem here, is now stuck... Have you received still no solution?

  Greetz

• Satellite X 200-219 - the touchpad does not work as it should

  Hi all

  I recently bought a 2nd hand Toshiba Satellite x 200-219. Had some problems with it that I have overcome now, except one... The touchpad does not work as it should. I think that the cable has been damaged at some point.

  So I'm wondering if I should use the same ribbon cable to connect the keyboard to the motherboard or can I get one of a different model of PC Toshiba laptop?

  I tried searching on the net for advice but have resulted in nothing so thought I would try the forums.

  Any help you can give will be greatly appreciated.

  Thanks in advance,

  Lee

  I think you can use the items to the satellite X 205 series since this seems to be the same series as X 200:
  Found some related parts the touchpad:
  Satellite X 205 / X 200 touchpad Board with cable: reference number: K000047950
  Satellite part number for the TOUCH PAD FFC X 205 / X 200: K000047980

  But why you n t come into contact with a Toshiba authorized service provider in your country and order the part necessary and compatible?

• Satellite P50 - B - 11 M - Ubuntu Linux usage

  Hello.

  I'm about to buy a Satellite P50 - B - 11 M, but I do not know if Ubuntu/Mint (that I use for work) works perfectly on this machine, since the Ubuntu Certified Desktop page does not list any machine of your brand.

  Can you help me? Someone test the machine on these operating systems? Toshiba after drivers on the Ubuntu repositories?

  Thank you.

  Hello

  Pending a response from the community, why not try?
  Ubuntu comes as a direct medium that allows you to run as a complete desktop experience without touching anything that is installed on your PC.
  You can then check that the devices work.

  Associated with Toshiba-drivers.
  Linux does not work on Windows in this sense. The drivers are rarely (Yes it happens, but very rare) provided as a separate download.
  They are normally included in the kernel packages which mean that they are available at the same time.

  Good luck and have fun!
  / Tom

• Satellite P50 - C - 17 M - problem with games

  I just bought a new Satelitte P50 - C - 17 M with inteL HD integrated graphics cards and also an external of 950M from Nvidia geforce gtx I guess?

  I'm really not good at this sort of thing, anyway I chose it cos it was cheap for its specifications and also 8 GB of ram, I thought it would be good for a game until I buy a desktop computer. Ive changed all things need in Nvidia Panel so all my games and applications are using the graphics card from NVIDIA and I've also clocked it form 993 GPU in 1124, which is the highest before he goes to the overclocking I think.

  First I tried to play the way of exile and I was happy to see my FPS up to 250-300 fps, but then I kept getting spikes up to 10-20 fps that was not logical. I tried to find a solution online and people were saying that the game has race problem on Win10, but even when I ran it in compatibility with 7 or 8 it continued doing the same drop in FPS.

  So last night I tried to play FFXIV and kept the same past.

  My constant fps were 59-65, but then I would have up to 10-12 points. I asked my friends and they told me that my laptop probably evolves to the internal graphics card during the game on his own so the FPS will be declining.

  Is the any landmark known for the problem :/?

  Thanks in advance.

  In Christmas 2015 buy a laptop Toshiba Satellite P50 - c - 11 k.

  It was 2 times by the technical service for various reasons and 2 the main reason was properly fixed (a failure of hard drive and another failure on the LCD)

  Recently, I got in touch with the service center for a problem, I think that I started to use the computer. The computer has a large processor and a large graphic and when used separately team offers exceptional performance.

  But I have a big problem that makes it impossible to use it normally.
  At the point where I use the computer with any of the games I bought legally and cerciorandome that the equipment meets the performance requirements of leftovers too.

  Early on the game should be noted that the team starts to heat a lot, after 5 minutes starts to slow down excessively. Monitoring the software using the following can be seen:
  -FPS (frames per second) generated by the game remains stable for the first 60 minutes, running with absolute normality
  -The temperature of the CPU starts to soar, reaching his limit of 105 ° C 5 minutes
  -At this time, the FPS success until 10/11, remaining so until the processor retrieves the temperature of 80 ° C
  -FPS return to their normal level of 60 a few minutes more, everything works perfectly during these times.
  -At the time where the processor returns to reach 105 10/11 FPS again until that process is repeated constantly.
  -This error is played every 2 or 3 minutes of play, indifferently, resolution, quality graphics and everything what you can get for configure options of the games.

  Looking for information on different websites on the problem and its solution have found different information that points to a serious problem of computer design.
  Because the CPU and GPU share the same broadcaster at a time that the graph starts to render passes to the temperature of the CPU's are not fast enough to cool the coming collapse.

  http://laptopmedia.com/review/Toshib...per-mid-range/

  I raised this issue with the service the customer of Toshiba in Spain for a couple of times. The answer is:

  «The information I have available, they indicate that the laptop has been tested and left our cumplindo Center repair factory specifications.»
  We can do nothing else in your laptop because it meets all our references and diagnostics. "

  I feel that they do not read my emails

• Very hot area of satellite P50-B-103

  My Satellite P50-B-103 became very hot in the area of the hand, where is RAM memory.,.
  I thought the problem is RAM and I am doing an upgrade to 16 GB.

  Here is a picture with hot zone

  

  Have you noticed that when running some applications of strong performance as a game?

  Usually, the heat dissipation is much higher apps running and so the laptop could be warmer.

• Tecra S1 - Accupoint / mouse Touchpad has become crazy

  Hello

  I bought my Tecra S1 second hand about 2 years ago and it was working fine until I realized missed me the video card driver, once installed the cursor on the screen went weird, he kept by adhering to one side of the screen for a long time, I uninstalled the driver but nothing works She continued to do until I completely lost control of the mouse whenever I opened my laptop.

  Recently, I decided to reinstall Windows XP Home edition to see if it was a software problem (of any kind) but still the problem of cursor. I don't know how an installation simple driver on my laptop has created such a hassle. I I am convinced that it is not a hardware problem since any device of mouse I use (mouse, touchpad, accupoint) the nuisance persists.

  If anyone has any suggestions / solutions please let me know.

  Thank you

  PA

  Hello

  I have older Tecra M1 and I had this problem. AccuPointer was defective and after Exchange of keyboard, everything was OK again.
  Only thing you can do is to use an external mouse and disable the double pointing device in the properties of the mouse or by using the FN + F9 key combination. I did the same thing.

  Of course, the touchpad driver must be installed.