Volume jump

Similar Questions

• The volume control on the Satellite Pro A200 with Ubuntu 7.10

  I have a Satellite Pro A200GE-1F9, I did recently to dual boot with Vista and Ubuntu 7.10. It's the first time I used Linux and most things are going well so far.

  However, the volume control (a wheel at the front of the laptop) does not control the volume correctly with Ubuntu, rather than increase the volume smoothly as with Vista, it increases in a 1/8 of maximum volume jumps, the on-screen volume control is always smooth. I think that it is at least partly due to the change of a material volume wheel, as with the latest Toshiba, I have used, for a version of software based. It controls the system volume and runs continuously, without stop at maximum or minimum volumes.

  Does anyone know how to change this change in volume for a smooth jump?

  Thanks for any help

  Hello

  given that no one here has no idea, nor pilots, nor any information about the driver from toshiba support, nobody will be able to give you some useful information.

  Have you ever google and checked the ubuntu forums? According to me, which will bring you closer the source here instead.
  So just to start to ask in the ubuntu forums because I think that someone is there who maybe has the same problem as you.

  I hope that artistry a kind of programmer. ;)

  Welcome them

• Help blackBerry Smartphones 8900 issues of Volume!

  Hello world

  Yesterday I tried to make a call without the helmet and the volume jumps just up and down and I hear nothing, but as soon as I plug in the headphones, it works fine.

  Can someone tell me what I need to do? Here in Hungary T-mobile does not support my device.

  Thank you

  Curiously, he just disappeared as he came around, I was in a call and past under silent profile normal and he went. It's maybe a software problem that caused this. Try to change your profile while during a call and then to remove the helmet, maybe it will work for you as well!

• Who is responsible for this file S-1-5-21, bak. How can I remove it entails?

  I have a file C:\$Recycle Bin S-1-5-21-1036034521, as well as 3 other series of numbers or letters, I understand that there is a bak. file. I want to know how to remove/place restriction, do something to prevent this file in my system. This file contains a virus/malware/spyware/hacker, I don't know exactly what. This file has caused me to destroy two windfows CD (XP/Vista) operating systems. I have 8 hard drive I can't use, because whoever it is, has made this possible. I also have three mothers who are inoperationable because of this file. My system has so many back doors, it's unreal. IAt, once I have hadf (Microsoft) help me to try to get rid of what I had. This file name has requested special connections in my system. This file, at the same time, place themselves in the properties, in an area of heavy, in giving himself, special previlages. I even went as far as the evolution of operating systems. I was using Ubuntu, until I realized, that was someone else on my system, not to mention I... This file is the use of systems as a means of entry volume, it also has the system volume jump to Windows XP SP 3, he jumped into other applications. IE Ccleaner, it's how I know. C Cleaner is on 4.39 kbs, when I check the size of the file c cleaners, he says now its 4 439 MB. You can indicate what sound files are been, because the file sizes have changed. Finally, I have three towers of substitute, to replace those that are damaged tyemporarily. I would like to place one in operation. But until I can figure out what to do about this file, I am skeptical. My system has been down for almost six months. My question is why this issue requires special log ons? Are you the microsft this? If it's you, what I've done wrong.  Once I get my system running again, if I need help, can someone help me if I find this file again. I'm not the only one who has this problem with someone trying to use the special connection and the same file name. It started about six months ago. I've been a problems, real player was suspended, then other programs started hanging. So I have sent e microsoft for assistance, which I thought was microsoft. Was real someone else. I have authorized him to my computer, it then my, life has been (). You know the word I want to use. Help, please!

  Hello

  1. When do you have the problem started? Have you added or deleted programs?

  2 have you tried to do a system restore to an earlier point of time?

  Try to run Microsoft Safety Scanner for any malware or spyware infection and check if it helps.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  I also suggest you to check the properties of the file.

• No sound on Vista after installing SP1/SP2 with Realtek

  Hello.

  I encountered a strange problem on the computer of my parents-in-law office. After an installation of SP1 (and later SP2) no sound stereo speakers that is connected to the computer to an outlet.

  The computer is an Acer Aspire T180 with a built-in audio device Realtek HD (5.1, but the connected speakers are two standard PC speakers), and the operating system is Vista. Before installing SP1, the sound was working properly, and absolutely no software or hardware changes have been completed.

  My troubleshooting so far include:

  -Tested with a helmet and another pair of speakers that I know works

  -I have obviously checked that nothing is cut in all available parameters, or speakers

  -Tried each input/output on the back of the computer, as well as on the front

  -Checked in "output devices" that the speakers are connected and checked by default device

  -Tried the two codecs/drivers available here: http://support.acer-euro.com/drivers/desktop/aspire_t180.html

  -Tried the drivers of avaiable supplied directly from Realtek: http://www.realtek.com.tw/downloads/

  -Uninstalled Realtek everything (both in the Device Manager and programs) and let Vista automatically install the original drivers

  -Disabled the 'digital output device (s/PDIF)"which is in the list of devices in output/game

  -Unchecked the 'detect connection on the front"in Realtek audio manager program

  -In addition, SP2 has been installed, which did not help. In addition, I tried every setting available, uninstalled/installed and so on. During music playback (or test tones Realtek or Windows sounds) all is apparently looking for OK with indicators of volume, jumping up and down, but everything is quiet.

  So I'm out of ideas and cannot understand this. I am very grateful for any help and advice. Thank you!

  Hello

  Make a Restore Point to be sure it works manually. The below indicates how to use VSSadmin to put in place
  and control if necessary.

  How to create a Vista System Restore Point
  http://www.Vistax64.com/tutorials/76332-system-restore-point-create.html

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  How to turn System Restore on or off in Vista
  http://www.Vistax64.com/tutorials/66971-system-restore.html

  Adjustment of the amount of disk space, System Restore uses for restore points
  http://bertk.MVPs.org/html/diskspacev.html
  How to change how much Space System Restore can use
  http://www.Vistax64.com/tutorials/76227-system-restore-disk-space.html
  http://www.Petri.co.il/change_amount_of_disk_space_used_by_system_restore_in_vista.htm

  ShadowStorage vssadmin commands
  http://TechNet.Microsoft.com/en-us/library/cc755866 (WS.10) .aspx
  http://technet2.Microsoft.com/WindowsServer/en/library/89d2e411-6977-4808-9AD5-476c9eaecaa51033.mspx?mfr=true

  Guide to Windows Vista system restore
  http://www.bleepingcomputer.com/tutorials/tutorial143.html

  Expiration errors occur in Volume Shadow Copy service writers, and shadow copies are lost during
  backup and at the time when there are high levels of input/output
  http://support.Microsoft.com/?ID=826936

  A good utility:

  Explorer of the shadow - free
  http://www.ShadowExplorer.com/

  ================================

  After doing your restore point.

  Go to Device Manager - click anywhere in the blank area - then click on VIEW - show hidden devices

  Look around your Sound Device - If found click right on - UNINSTALL and when the box appears
  -REMOVE the pilot - REBOOT - reinstall your latest driver - do not forget to check the version of the Device Manager
  that they could rollback and you will need to install the driver - reboot - check until the correct version shows
  upward.

  Also the sound driver in previous posts.

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  No sound in Windows - a Mr Fixit
  http://support.Microsoft.com/GP/NO_SOUND

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Noise of blackBerry Smartphones by clicking on a call and a volume bar jumping up and down

  Hello

  I'm having a problem with my Pearl. This morning, as soon as I start or receive a call, a rattling noise starts coming through the speaker who will cancel the person at the other end. The click is regular and when I activated the loudspeaker and could look at the screen I noticed that the volume bar is jumping up and down too...!

  It seems not important whether it is an incoming call or outgoing, or if the speaker is turned on or not, I could not test it yet with the helmet, but I'm going tonight and see what happens.

  No, I didn't fall this morning...

  Any help much appreciated!

  Alex

  I had the same problem with my 8320 which lasted three days.  I think that the problem is caused by the headphone.  The soft reset and wiping the phone it only, she began to work again after the insertion of helmet and move the headphone jack.

• Sometimes when I adjust the volume on my iphone SE the volume will jump to full or mute and he will remain stuck, how can I fix?

  It can be very annoying. For the moment, I have to restart my phone whenever that happens and I want to know if there is a way I can stop password or a better way to solve what restart my phone? Help, please!

  'Force' restart your iPhone.

  Press and hold the Home and Sleep/Wake buttons for at least ten seconds, until you see the Apple logo.

  If this does not help, tap settings > general > reset > reset all settings and then try to adjust the volume.

• Volume - volume wheel - Portege M800 level jumps

  Hi all

  I have Toshiba Portege M800 and I have a problem with the volume knob.
  If I try to increase or decrease the volume of this volume knob, it will change, but the volume does not change linear.

  For example, when I increase the volume from 0 to something, volume changes, during rolling, for example 0-1-2-3-4-5-3-8-6 (this is just an example).

  Why it does not change linear, for example 0-1-2-3-4-5-6-7-8?
  Is it caused by the software or it's hardware problem?

  I could claim the goods?

  Thank you.

  Hello

  I had a similar problem with the volume level on my laptop satellite.
  I am tired of everything; updated the BIOS, driver sound, I reinstalled my OS using Roecvery disc but I didn t notice any improvements.

  Finally my ASP technician checked the volume wheel and cleaned the contacts and removed the dust.
  It's the key
  Dirt affected the functionality of volume knob

  In my case it helped, but this does not mean that this will help you as well.
  I think you should also update the BIOS and check if you can update the audio driver.
  If this will not help then he recommends contacting the technician of the ASP for advice

• I have Windows 8 on my pc... at a time that the volume control on the screen has been affected and an icon/indicator jumped on my screen.

  When this has been touched an icon/indicator popped up on my screen and therefore not allowing the touchpad keyboard see... I can't find how to make it go away... it will not also allow me to use my cursor to make my sideview control out to shut down the computer... How can I get rid of this?

  Hello Wanda.

  Thanks for writing back and providing the information required as well as the screenshot.

  According to the information provided and the screenshot, the volume icon that appears on the screen is the result after pressing the Volume button on the keyboard. First, open the charm of settings , click on "change settings of the PC", then accessibility > Other Settingsand change the length of time to display the notifications to in the drop-down list box. This will reduce the amount of time that remains the notification on the screen. If this does not resolve the issue, go further.

  To remove the icon of volume you can press the volume button on the keyboard again. This work of keyboard keys based on the drivers provided by the manufacturer, I beg of you download and install the latest version of the drivers for the keyboard to solve this problem.

  Click on the link below to download the drivers.

  Drivers Lenovo idea Centre B540

  Hope the helps of information provided. Let us know the results, so that we can help you further.

• I have sound and volume but when music plays, I get a sound turnover to jump?

  ignores the music library and cd what could be the problem?

  Hello

  1. which edition of Windows are you running?

  Example: Windows 7 Professional 64-bit

  2 is the issue specific to your Media Player software or other software as player?
   
  3. what was the recent change in hardware or software performed on the computer before the question?
   
  Method 1
   
  How can I stop my music skip or break down when I play?
   
  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-stop-my-music-from-skipping-or-breaking-up-when-I-play-it
   
  Method 2

  a. you can also look at "tips for solving common audio problems.

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  See also, Sound from my speakers is crackling or distorted.

  
  b. the sound cards: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/sound-cards-frequently-asked-questions

  I hope this helps.

• HTML5 triggers ALSA incredibly high volume video

  On the latest nightly of Firefox when viewing YouTube videos, or any other site that offers html5 video, my sound is automatically triggered, about 50%, or 100%. This happens with both h.264 and VP8. I tried in safe mode and with a new profile, does not. I have alsa and pulseaudio, but if I open a YouTube tab and watch alsamixer, he will jump from there where I got 100% as soon as the video starts to play.

  I tell myself that I will probably need to post a bug report, but I thought I'd try here everything first.

  I put "dish-volumes = no" in my etc/pulse/daemon.conf. He's not big, but it solves the problem for now.

• Omen of HP: HP Omen volume decreases

  I have a problem with my new HP omen. It works just fine, but sometimes, when you play games, watch movie or video on the internet or listening to music the volume maxed out is however suddenly, the volume decreases. It is always maxed out but much quieter plays... I don't know why this is happening and what should I do and bothers me. What should I do? I have all the latest drivers. Music jumps then go back up to maximum volume, but after 5-10 minutes.

  Hi @dofe657, thank you for visiting the Forums from the HP Support!

  I understand that the volume decreases automatically when you play games or watch videos.

  There is a known about this article.

  To resolve this issue, download and install the audio driver.

  Link to article: http://hp.care/2cFzkSi

  Note: Before installing the audio driver uninstall all components of the audio drivers from the Device Manager.

  Let me know if it works,

  Have a great day!

• OS sound produce a high-pitched noise (M70-160) + keyboard cursor jumps

  Hello everyone,

  I own a satellite M70-160 for about a year. There are two problems:
  (a) 15 days ago all the sounds of the o/s (for example when windows start/end, wheel etc) no longer works properly and began to produce a high-pitched noise. It's extremely annoying. I downloaded the realtek soundmax which only temporarily solves the problem. Now every time I have reinstall, when sound is shut down it works fine, but then again when I restart the computer it is working properly.
  In addition this problem disappears and appears periodically and it seems that most of the o/s sound time is malfunctioning.

  (b) when I type fast in keyboard cursor jumps into other lines or bar tasks or made the selection of text etc. as there is a kind of shortcut (this problem is not related to the first as it appeared from the beginning).

  I shouldn't forget to mention that I installed almost every new driver (might have missed one or two but it is highly unlikely)

  Thank you very much

  Giorgos

  Hello

  (a) I have the same unit, but so far I didn't notice something like that. If this happens regularly, it makes the not so easy diagnosis. Try to test with different volume levels and also with headphones.
  (b) key combination while typing to disable using FN + F9 touchpad. Maybe you touch touchpad with your hand while typing so fast.

  The last option you can try is updated BIOS. If you want to do this please READ the document how to do this.

• G20 - problems with volume wheel

  My volume wheel does not work as it should, when I'm trying to turn down the volume, he jumps again. even when turning upward, it's the jump down. Put upwards or downwards to turn and turn and turn until it moves. If I fire the sound upward is like it is move 1 up, 1 down, 1 up, 1 down, 2 up, 1 down... and so on.
  Does anyone have a solution for this problem? It's like that in the Qosmio player and Windows.

  Truls

  Hi Truls

  It's very strange question. I too have the Qosmio G20, but have no problem like this.
  This problem occurs only if you use the wheel of volume on the right side or the same thing will happen if you change the volume using Volume control tool?

• Re: Volume control is only

  This seems an unusual problem.
  I put the volume of force I want. If there is the slightest movement of my laptop, the cursor will just downwards or upwards, in itself.

  Been to my engineer who wiped everything and then reinstalled but no avail.
  He said there seems to be an error on the motherboard, but it is a long and costly repair job.

  Computer laptop is only 18 months old, so I expect better of Toshiba.
  Has anyone else had a problem like this, and if so, it is resolved, please?

  Hello

  I had a same or similar problem with my laptop U400. The volume bar jumped up and down to try to increase the volume. I read in some discussions that the volume control is digital and could it happen due to dust or debris between the sensors.

  I clean it using a jet of compressed air.
  I don't know if this could help you too, but in my case it helped to solve this annoying problem m