Satellite P70 - A - installation of Win Pro 8.1

Similar Questions

• Satellite U940 PSU6SA - installation of Win 7 ask for HARD drive drivers

  Hello

  not sure whether to put this under "Windows 7", Mods please move as necessary.»

  I have a ultrabook Toshiba U940 PSU6SA - 02K 002 that came with Windows 8 (not Pro) and I would like to install windows 7 on it. It has a Hitachi 500 GB and a small mSATA SSD 32 GB.
  It works already latest BIOS Toshiba 1.30.

  I turned off safe start-up and UEFI, can I start and start the windows 7 installation from USB, but it is looking for additional drivers that I can't work. I have tried various drivers of windows 7 Toshiba has had on their site for the 940 Ultrabooks but without success. (Driver Intel Rapid Storage Technology, Intel Chipset Software Utility, driver USB 3 and Intel Display Driver).

  I'm unziping the drivers on an another USB and installation is to find them, but they seem not to be what he wants.

  Any suggestions or a guide? Thank you

  What you need is the SATA driver that must be loaded before Win7 installation doesn't start.
  Please download it from here.

  I used to install Win7 on my U940.

• Question about the installation of Win XP on Satellite Pro P200

  Hello

  I have a lot of problems with Vista. First it took me a week to install my printer WiFi. (sollution: install local lpt1 as the printer, change port properties en gives a location network (computer/printername).)
  Last problem: vista give no right to copy my USB hd protable with xp files.

  Finally, I lost all hope and want to go back to xp.

  Is there anyone with experience in the installation of win xp on this laptop. And is it possible to tell me the steps that you have been taken to do so.
  Are there concerns as none have some drivers, things that do not work or problems with sata hd.

  Thank you

  Luke

  Hello

  It's a difficult topic-> XP on Vista machines.

  First: Yes, you can install XP on it because all the important factors are available (VGA, SATA, wireless, XP BIOS, BLUETOOTH) and that should be enough.

  Because your computer has a BIOS for Vista (I guess there a) Please install the BIOS XP first and then start the installation of XP. In the case that your HARD drive is not recognized then you need to install the SATA driver during the installation of windows XP. The procedure is described in the statement of the Satellite L40-> XP installation, so if you want to install and problems SATA (HDD, not during the XP installation), you must check the installation instructions for Windows XP for a SATELLITE L40!

  If you have additional questions, I recommend allows you to place your question here before doing something that may stop your nerves later. :)

  Welcome them

• Problem using Toshiba Software Installer for Win 7 on Satellite L750-1MT

  Hello!
  I have the problem with Toshiba Software Installer for Win 7 on Satellite L750-1MT (PSK30E-02T002B3) with no preinstalled operating system.
  I do the following:

  1. install Windows 7 x 64 SP1.
  2 Installing the LAN driver (device was not recognized by Windows 6) (downloaded from [http://se.computers.toshiba-europe.com/innovation/jsp/supportMyProduct.do?service=SE&LNG=26&userAction=S MP_RESULTS_PAGE & partNumber = PSK30E-02T002B3 & serialNumber = & USER_ACTION = Serial % 20number])
  3. install all updates of Microsoft Windows
  4. run the installer of the software Toshiba for Win 7 - it installs two drivers and then asks to restart.

  Here is the log for the first test (win7update.log) file:

  12\28\2011 update started at 21:11
  TVALZ_O.inf installed
  E/s installed & memory access driver
  driver_bluetooth_TC00241200A.exe/s/log/test has been installed with the result of the PASS code
  util_tvap_TC00215000H.exe/s/log/test /wait15 was installed with the result of the PASS code
  Updated at 21:29

  After the restart I've run it again and the result is:

  12\28\2011 update started at 21:38
  Toshiba Bluetooth stack has already been installed.
  Toshiba value added package has already been installed.
  Updated at 21:40

  Any help is appreciated!
  Thanks in advance!

  Stand by.
  What are you doing exactly?
  You try to install own OS?

• Qosmio F20-141 - cannot start the installation of Win XP PRO SP2.

  Failed to start installation of Win XP PRO SP2.

  After click on "Start of the CD" I can see for a short time only from message ~ "Install from XP Wisdows" (small white letters at the top of the black screen)

  After this computer hungs in black screen.

  QOSMIO F20-141 for the Federation of Russia
  M/N: PQF20E-02801YRU

  Hello

  Have you used the Toshiba Recovery CD or did you install the operating system from the original CD of Win XP?
  As far as I know the recovery procedure is very easy to use and it should work without any problems.

  Good bye

• During the installation of Win - xp pro vmware error 10 as mentioned below

  During the installation of Win - xp pro in 10 vmware, it is showing "OPERATING SYSTEM IS NOT FOUND" how to solve. I scoured the file .iso record and properly connected to all readers. Help me solve this problem.

  I think you'd have better luck if you go to the website of VMware support.

  http://www.VMware.com/support.html

• Satellite Z30: Win Pro 8 - How to get the display wireless work

  Did somebody get this working?

  No idea why you can get the Tosh drivers for win 7 but not windows 8?

  Not available at the z30 on windows 8 Wireless Display Utility :-(

  Z30 - A series satellite has been preloaded with Win 8.1
  There is no reason to come back to Win 8.

  Windows 7, as well as pilots Win 8.1 are already published on the page of the Toshiba UE driver.

• Satellite 1800-712: slow after WXP Pro included SP2 installation

  Hello

  I have a Toshiba 1800-712 and I've recently upgraded the memory with another 256 MB.

  Before the upgrade the laptop run very fast because there where loads of unnecessary applications installed. I bought a Windows XP and it installed on the laptop with SP2.

  Since then, the laptop is very slow to access the DVD drive and the HARD drive.

  He ran before that kind of OK with XP Home, but since XP Professional you cannot watch DVD as they stutter and if play you MP3 in Mediaplayer the possibility is also not in sync with the music.

  It seems that there is missing specific IDE drivers or the wrong with those supplied with XP.

  I had a glance on the toshiba site, but the drivers only I can find that there is the display and audio drivers.

  The motherboard seems to be an ALI M5229 Chipset

  I need to restore professional XP and re - install my whole machine with XP Home that comes with it?

  I also tried the DVD player to be upgraded to the latest Firmware but that does no change.

  She is running in UDMA 2 and I tried PIO and I also had a peek into the Bios with IDE Standard or extra but still the same.

  Anyone?

  PT - 1 (at) gmx.net

  Hi James,

  In principle your laptop should also work well with XP Pro installed as it did with XP Home. However, I would be inclined to check in the Task Manager to see what processes you really have running and also make sure that your installation of XP Pro is not make the repeated attempts to access a network or network resources.

  Also, I would like to run a disk cleanup and Defragmenter of given that the installation process tends to leave the hard drive in a bit of a mess of the nature of the facility.

  The fact that your DVD stutter when playing suggests that there are other CPU activity going on in the background.

  Kind regards

• Adding a new SSD on Satellite P70-A-107

  Hello

  Recently bought a Toshiba Satellite P70-107-A. It has a 1 t HARD drive and another empty location where I can put another SSD or HARD disk.

  I already have orderedt an SSD (840 pro) and I think puts it in slot 1 with the system and put the 1 t HARD drive in slot 2. I created a usb media recovery with Recovery Media Creator Toshiva with the recovery of the computer image.

  My question is: can I just put the SSD in slot 1 and to boot via USB and make recovery directly on the SSD? The bios will recognize the SSD?

  I need to install any drivers for bios recognize the SSD?
  Also heard that it was necessary to activate the AHCI, but I don't see this option in the bios.

  Thank you.

  If you have the original recovery media, I think that everything should be OK.
  Only put the SSD and then install original recovery image. When it's all over and the operating system is installed properly, you can add second drive.

  When you put the new SSDS go to parameters of the BIOS, check if the SSD is recognized correctly, the value of the BIOS default settings and continue with the installation of the OS (original recovery image).
  Please post comments.

• Satellite P70 - A - recovery/transfer on different drive system

  Hello
  I buy a new drive SSD and Satellite P70 - A - 10 L. Operating system (Win8) is located on 1 TB of HARD drive. What should you do to transfer the system to a new disk? or how to retrieve it on SSD HARD drive instead?

  Apo86

  All about recovery image and recovery you can read in the document s user manuals. You will find information you need to create a recovery media. Need DVD or USB.
  You can't just copy recovery image to another SSD or HARD disk and later to begin installation of recovery here.

  You must create media recovery bootable utility preinstalled Toshiba Recovery Media Creator.

• Problem Bluetooth satellite P70-B-102 - upgrade to Windows 10

  Hello to all forum users.

  I have a laptop Toshiba Satellite P70-B-102 with the operating system Windows 8.1 in Portuguese.

  The problem I have is that I can not upgrade to Windows 10, since, according to the upgrade of Windows application, the computer cannot update the Bluetooth drivers, including the following: Bluetooth RFHID, RFBNEP, RFBUS and RFCOMM.

  This situation remains at least a month and a half and I can't update windows to version 10.

  Can someone help me solve this problem?

  Thanks for your valuable help!
  Pedro Moura

  It's very strange... I think it must be some kind of Windows bug... I recommend you check if all Windows updates and patches are installed.

  In addition, the unit is listed as a supported upgrade Win 10 model, so win 10 update should be possible.

  The unit is here: http://win10upgrade.toshiba.com/swup...spx?region=TEG

  Win 10 driver can be downloaded and updated from this page:
  http://win10upgrade.Toshiba.com/swup...SPX?region=TEG

  but in case the upgrade of Windows 10 using the automatic upgrade procedure does not work, try to improve Windows 10 using the media creation tool
  http://Windows.Microsoft.com/en-us/w...n-tool-install

• Satellite P70-A01D: change the drive letters after the 2nd SSD upgrade

  I think it's a generic UEFI / Win 8.1 question (not according to model).

  However, FWIW, I have a Satellite P70-A01D (bought locally here in Australia).

  It is a victory of 16 GB 17.3 inch Gen4 i7 4700MQ Intel HM86 8.0 64-bit RAM.
  http://www.MyToshiba.com.au/products/computers/satellite/P70/psplpa-01d002/specifications

  I updated the OS to Win 8.1

  The P70 is supplied with a drive Bay HARD vacuum #2 - I bought a 250 GB Samsung 840 EVO SSD that I want to use as the main system disk / boot Win 8.1.

  I installed this SSD in bays #2 and from there I had no problem using the wizard of Samsun cloning software provided with the SSD (VCC 4.0) to clone my 1 TB on the SSD system.

  There are a lot of instructions from Samsun and around the web on how to clone and "substitute" of a HDD with a SSD - however there are much less when it comes to 'Add' the SSD - in the #2 Bay - while always keeping the original HDD fully functional as an additional drive.

  After execution of the cloning software, I tried just go into the settings of the UEFI on reboot and change the order of the boot drive placing the SSDS over HARD drive.

  It worked but there are obviously questions still as I had not renamed readers SSD worked as system but he was editing as D: and HARD drive was still C: and most of the system/application paths were always scheduled to access C:!

  It led to the crash and restart cycles of the Bureau (? & or explorer.exe?) and two consistent error messages:
  -"SkyDrive engine Sync host has stopped working".
  -"Host for the synchronization setting process has stopped working".

  I saw in the Control Panel-Administrative Tools-Computer Management-Online Storage-online-online right click on each drive disk management online online that I can access > however
  (a) I'm not sure if the solution I need is this simple;
  (b) nervous about change of letter on a disk while running the system; and
  (C) uncertain steps in order of evolution [IE. C: (non - sys) becomes M; D: (sys) becomes C:...

  At the moment via UEFI I'm back to working with the system on the HARD disk rather than on the SSD seems stable and without compromise of my screwing around!

  Apologies for the long post by train to make sure to include all relevant information. I think that my final goal is double win bootable 8.1 / Ubuntu 12.04 of the SSDS probably with Ubuntu on a 50 GB partition leaving 200 GB (enough?). I want to keep a slab of SSD space available for photo and video editing: +/-100 GB!

  I wondered simply assign new letters to readers, however the notes at the bottom of http://windows.microsoft.com/en-au/windows7/change-add-or-remove-a-drive-letter state:

  You cannot change a drive letter if the drive is a system partition or a boot partition.

  Suggestions please?

  Hello

  I think you could try to change the letter to readers as suggested in the Microsoft article.
  Where this is not possible, try to use 3rd party such as GParted software.
  http://gparted.org/LiveUSB.php

  You could try changing the drive letters might start to the top of the unit using the live USB version.
  But it might be possible that your system would not initialize correctly after this change.

  So you should not forget to mark the partition as bootable.

  Your comments would be appreciated

• Retrieve Satellite C850-F12S - currently installed Win 8.1

  Hello!

  now, I installed Win 8.1 and I want to restore it to its original state to Win 7 Starter but don't know how to do, I bought my C850-F12S Satellite with Win 7 Starter.

  I not create recovery image so m lost on how to get it back.

  Someone help me please

  If you have not created the means of recovery in the past, then you will not be able to recover the laptop.

  The disk HARD recovery isn't possible because the HARD drive recovery partition has been eliminated during the installation of Win 8.1.

  You have only one option to do: you must order this recovery disk:
  http://backupmedia.Toshiba.EU/landing.aspx

• Dual-boot a Satellite A660-18 - BSOD install Win XP

  I recently bought the laptop above for use on astro photography.
  A lot of the software I use is 32 bit and XP to use so I thought that I could set up a dual boot on the laptop using Win 7 64 bit OS (pre-installed) for processing in CS5 after that I captured the images using XP Pro 32 bits of the image.

  I use XP Pro 32 bit to control the astronomical mount follow-up and to capture images of the Canon DSLR as they won't work on a more recent OS and most certainly will not work on 64-bit and will not work in compatibility or any virtual box modes.

  I started by cutting the main 50 GB partition and creating a new 50 GB partition to install XP Pro on and then tried to install XP Pro from the CD on the new partition. The initial back based races common installation ok with loaded drivers from the CD, but until the installation either by selecting the partition to install XP Pro system stops with a BSOD and I can only turn off the laptop.

  I would be grateful pointers for getting this working to dual boot, I realize that some of the features of the laptop will probably be lost under XP Pro but I don't need of work for you USB ports connect to external equipment to control system astro and then I can reboot in win7 OS.

  Best regards
  KeV Lewis

  > Based initial backs racing common installation ok with the drivers loaded from the CD, but before the installation is by selecting the partition to install XP Pro system stops with a BSOD and I can only turn off the laptop.
  Please use the forum search option and search of SATA drivers and the installation of Win XP.
  There are a lot of discussions about this...

  The point is that new notebooks need driver SATA to reinstall the OS.
  Win 7 already includes new drivers SATA but Win XP doesn t.

  The SATA driver is part of the Intel Storage Manager you can download this from Intel page too.

  I used the program nLite to build a new Win XP CD that contains the SATA driver.

• HP EliteBook 850 G1 - Win Pro - Computrace conflict with HP Client Security Manager 8.1 8.1

  Hello

  I tried to install the software HP Computrace (International) SP64143 c. 8.3.0.5 (November 12, 2013) on my G1 of 850 EliteBook after upgrade to Win 8.1 Pro, but I get the following error:

  "The security application can be installed up to what the HP Client Security Manager 8.1 is installed"

  Please note that I do not installed the Hp Client Security Package Manager and some other similar programs appear to be installed.

  What is this supposed to do? Give access to the function of Lojack (the new name Computrace)? I also wonder if it would be a relevant problem to activate the service of Absolute Software Lojack.

  Help, please... Thank you

  Caramel thanks for pointing me in the right direction to achieve the final solution!

  After a few experiences, it's my final conclusion: HP distributes two different service packs that have the same:

  • name SP64339.exe
  • version (8.3.1.1714 (November 20, 2013) and)
  • Description on the web page (HP Client Manager Security)

  but * ILS DO NOT HAVE THE SAME CONTENT AND APPLICATIONS *. If access you the link you gave me:

  https://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5405369&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_125837_1%257CswEnvOID%253D4132%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  #1: a system Win Pro 8, the HP Server allow you to download a file that has:

  • Description of the file: HP Client Manager improved offer a Windows login Security...
  • File version: 4.0.100.1189
  • Size 148 MB
  • This corresponds to the full-fledged HP customer Security Manager (CSM) implemented by Digital Persona Inc..

  #2: a Win 8.1 Pro system, the HP Server allow you to download a file that has:

  • No Description of file
  • File version: 4.0.100.1189
  • Size 90.6 MB
  • This corresponds to the HP SimplePass application created by Softex Inc., a very basic site password Program Manager.

  Just after installation on the OS Win 8 Pro the CSM HP put implemented by Digital Persona Inc., I was also able to install the Computrace patch (SP64143.exe) smoothly. It is a distinct and different from the SP64339 SP and it allows to Absolute Software access to the features of the Intel anti-theft technology.

  Please note that this give HP CSM access you the function of connection of fingerprints and others.

  The problem that I saw earlier, it is that in Win 8.1 Pro is due to the fact that the SimplePass application does not support the Computrace agent. so I tried to install on my Elitebook with Win 8.1 Pro the SP64339 even system 850 downloaded previously using a HD different mounting an OS Win 8 Pro and... here, everything seems to install and works great even on Win 8.1 Pro.

  The main question are:

   

  1. why HP did end with the distribution of their security HP Client Manager?

   

  2 what problems is I meet on Win 8.1 Pro with the Security HP Client Manager designed for Windows 8 Pro?

  I suppose I could run into some problem if I change the pwd of my login, even if outllok.com... Web site it would generate a disallignment on the connection of access controlled, managed by the CSM from HP on my PC...

  Thanks a lot again for your GREAT help!