Satellite Pro 2410 - Wireless card (Belkin) will not allow

Similar Questions

• Satellite Pro L450: Wireless card missing or did not exist

  Hello, pls I need help

  my lap is toshiba satellite pro L450 suddenly I don't see the wireless card I check the bios and find this option is turned on also update the bios and the problem still exists and there is no card in Device Manager
  the light wireless always off I do not know what happened? and the function keys Fn + F8 doesnot work I install add package and this doesnot solve the problem

  My guess is that just failed your wireless hardware.

  Windows does not display the device driver if it does not find the hardware.

  See this thread where I make various suggestions and tips:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=65938&TSTART=0

  Probably the best thing to do is to buy a USB Wireless Lan.

  Post edited by: badhat

• Satellite Pro 4600 Wireless card does not work with WIN2K?

  I have a Satellite Pro 4600 with UK dealer PA3070U-1MPC wireless operating with Windows 2000 card

  The wireless client Manager detects the network from my wireless router and the signal is excellent and I see all the Green swhowing bars.

  But I can't mske a connection in 'connections' wireless says "network cable is disconnected.

  the router works well with other laptops in my house.

  I have the latest version of Win2K also downloaded and installed the latest versions of client manager and WLAN driver for win2k to the toshiba Web site.

  'Support of toshiba in Turkey' told me ' I need another driver for Win2K for my driver wireless card cause win2K on the toshiba site isn't for "thie" wireless card ". I have been waiting for this for 3 weeks now and couldn't join the UK level 3 elusive support who supposed to have this driver. I saw on the internet is the same wireless card was sold as an accessory "made by toshiba" and he said that it is compatible with Wim2K

  What I then please? It works with Win2K, is it "another driver" and so on?

  Thank you

  Hello

  I don t think that there is something wrong with the driver because you can receive signals from router (green bars). If the driver WLan would be a mistake if wouldn t receive all signals.
  Please check device manager. If the wireless card is recognized if you are using the correct driver and the driver has been installed correctly.
  Please see this page:
  http://209.167.114.38/support/TechSupport/TSBs/all/-TSB000705.htm

  In my view, the message "network cable is disconnected" appears because your (NOT wireless) LAN cable is not connected. This post has nothing to do with the question of Wlan.
  You should check your WLan settings again.

• Satellite Pro L300 - wireless card does not work under Ubuntu

  Hi all,

  I want to know what is the model of my wireless card. I need to know because I need the driver of windows for Ubuntu. I see on the internet for the L300 series, we have a lot of wireless card... I want to know what is the card of my pc.

  Thanks a lot and best regards

  LOL: D you're funny type. Please don t do it harder they are.

  There are many opportunities to find out what card WLan has been inserted.

  The easiest way is to check the bottom of the unit.
  There are a lot of different labels and on one of the labels you should see a WLan card model or part number.
  Take this number it in the google search and google for this field.

• Satellite Pro L300 - USB card reader does not support the 64 GB

  HI I have a Satellite Pro L300 under Win XP that I want to attach a USB card reader. I find that I can not read the 64 GB cards. The error is that the card is not formatted. All other cards read correctly. I can place this card reader in my desktop running Win 10 and it works correctly and reads the 64 GB cards. This seems to indicate that the USB card reader works properly, and perhaps that the problem lies in the USB on the Toshiba drivers. Has anyone else had this problem and found a fix for this. I've just updated the BIOS but no improvement. Thank you

  Posted by Trees
  

  HI I have a Satellite Pro L300 under Win XP that I want to attach a USB card reader. I find that I can not read the 64 GB cards. The error is that the card is not formatted. All other cards read correctly. I can place this card reader in my desktop running Win 10 and it works correctly and reads the 64 GB cards. This seems to indicate that the USB card reader works properly, and perhaps that the problem lies in the USB on the Toshiba drivers. Has anyone else had this problem and found a fix for this. I've just updated the BIOS but no improvement. Thank you

  Hi, here is a link to not detected by the PC card reader:
  http://KB.SanDisk.com/app/answers/de...CTED-by-the-PC
  You can take a look, hope it will be useful to you.

• Satellite Pro A100: CD/DVD player will not play the audio CD or video DVD

  People,
  I have a Satellite Pro A100, with a RUG * a DVD-RAM UJ - 841 S Drive.
  It will read fine data disks, but refuses to play with the audio CD or video DVD.

  I tried to uninstall & Re-Installing DVD - RAM Driver;
  That got rid of the "IO error" that I received, unfortunately I don't notice the full error: S.
  He now just doesn't see the drive. Someone at - it ideas?

  I did a full windows update, and the Toshiba Diagnostic util tell me anything useful except "Fail" :(

  I found a thread in this forum that describes a similar theme:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=19747&MessageID=72404

  Sometimes this error is displayed because the player does not support the environment.
  Always it is every way is supported by readers and I think that in the user manual, you will find an index CDs or DVDs compatible

  Maybe the drive is defective and can not calibrate lens in the right position.
  But this laptop is not very old, and I can't imagine that the drive is defective
  However, nothing is impossible.

  What you can do is to carefully clean the lens and see that it will help.

• Satellite Pro S300 - 11G: headphones Pluging will not completely cutting speakers

  With high volume settings and with the headphones plugged-in, a very distorted sound leaking through the speakers.
  Have tried using several different headphones.

  The machine is that the satellite Pro S300 - 11G retrograde to XP and less than a month.
  Toshiba service are threatening to charge if the problem turns out to be the software, not hardware. (even if they provided the software!).

  Popular ideas

  You have the volume of the Microphone high value?

  Maybe he just returned from Mic. Try to cut the Microphone, or turn down the volume to about 10%.

• Qustion for satellite Pro M30 wireless card

  Hello

  I have laptop has Intel 2100. Use an Intel 2200 card bought on the open market would work, or should I buy the Toshiba one?

  Thanks and greetings

  George

  Hello

  In my opinion, you can buy the wireless card where you want, but the cards that you can order on the Toshiba site are tested and it should work without problem. As far as I know on your device there are drivers for ATHEROS and INTEL wireless already preinstalled and these cards will be recognized and installed automatically.

• Satellite L30 (PLS33) - wireless card driver does not

  Hello

  I have a problem with the wireless card. I need a driver, but the original driver (excerpt from the Toshiba site) does not work.

  Please, give me the address work pilot.

  Check this box:
  http://APS2.toshiba-tro.de/WLAN/

  By the way; All WLan drivers work! But don t wonder if you do not use good driver for the wireless network card!
  Check your wireless network adapter and use the right one!

• Satellite Pro L450D black screen and will not respond to any keys

  Hello

  My niece has used his Toshiba L450D for almost a year now and he really liked it, who was until last month. She turned on her laptop and when she presses the button of the mouse, the button cracked and he fell into the laptop.

  Now my brother contacted Toshiba and I was told because it is under warranty it might return for repair because it was a common fault. Then he he packed in loads of air bubbles and a box to make sure it was safe.

  A few weeks later he came back repaired but we were all shocked that the laptop was put in a very loose box and you could hear this rattling noise. When we turned on the battery was flat and we had a new boot menu.

  As she installed it Windows 7 laptop would boot directly into Windows 7, but now after the repair of the laptop shows a menu black screen with as follows:

  + Windows 7 +.
  + Recover Windows to Factory Settings [active EMS] +.

  So we started in Windows and everything went well, but now after 5 or 10 or even 20 minutes, laptop displays a black screen and will not respond to keys or mouse movement. There is nothing on the screen its just black.

  I started in SafeMode (which was more difficult with the new menu) and it does the same thing. I even managed to do a virus scan quick who took 3-4 minutes and was clean.

  I would like some advice on what my niece is very angry, and it's difficult to explain what is happening to a child in the primary school.

  Any help would be grateful.

  Hello

  Have you tried the option of HARD drive recovery?

  If this is not the case, try to set the notebook back to factory settings using HARD drive recovery.
  Turn on the device, press F12, choose repair my computer, then select Toshiba HDD recovery.

  I hope it will work!

• Satellite Pro 430 CD: card wifi PCMCIA not recognised

  I have this laptop old which is still in occasional use. It is already updated for Windows 98 SE and working reasonably well even so naturally more slow. I had considered to connect to a wireless router with a Wireless PCMCIA network card. Installation and implementation is supposed to be a simple but not quite simple procedure, because it does not work. Two PCMCIA slots are functional because they recognize and allow operation of the PCMCIA modem to access remotely.

  However, the wireless network card is not yet recognized, and reading for the two slots indicates empty state. The map has been tested on another more recent laptop and is fully functional. Does anyone know if the old machine that above is even able to deliver what I'm trying to get by? The configuration required by the supplier/manufacturer of the card is a PC-compatible computer with a compatible CardBus 32-bit slot available and the operating system is Windows 98 SE, I have. It is possible, that I expect a lot of this old machine, can one through some light on the subject?

  [Edited by: admin]

  Hello

  I found information that your device can use 2 x PCMCIA Type II or 1 x PCMCIA of Type III. In my opinion, you should check your device specifications and there must be information law which PCMCIA card you can use with it (16 or 32 bit).

  Also, I found a very interesting site on standards and PCMCIA cards. If you want you can check it out on http://www.sycard.com/pcard_qa.html.

• I have a Buffalo wireless card that will not get a wireless connection. "No wireless network in range.

  original title: NIC Buffalo

  I have wireless G 54 Mbps Buffalo Airstation net card and cannot get a wireless connection. I've already tried uninstalling the software/drivers, reinstall the software/drivers.  I tried to enter the IP address manually, but I get the same message.  "No wireless network in range.  I can use the adapter wireless interal very well, but want to use the faster card.  Someone at - it ideas?  The router is a D-Link, and is not mine, so I can't do it around with her money.

  Thanks in advance,

  Sharon

  Hello Sharon,
   
  Follow the methods given in the order.
   
  Method 1: Restart the Wireless Auto-Configuration service

  To restart the service automatic wireless setup follow the steps below.

  i. Click Start
  II. click on run
  III. run window, type the command services.msc and click OK
  IV. on the list of services, select Wireless Auto Configuration.

  v. Double click on the service
  VI. click on stop and then click Start
  VII. click on apply, then OK.
   
  Restart the computer and check.
   
  Method 2: Try the steps listed in the following article and check, if it helps in fixing the issue:
   
  How to troubleshoot wireless network connections in Windows XP Service Pack 2

• Satellite Pro M70: "Caps lock" light will not stay

  After repairs to toshiba in my brand-new laptop pro M70 (System Board has been replaced) I noticed that the caps light does not work when the caps is on. The bulb works as it lights up when you press the caps, but there are not on.
  Although the installation of ceiling works I don't know when the caps lock button is enabled or disabled. Very confusing.

  Any help is greatly appreciated. I am running MS windows XP pro.
  Brendan was soon

  Hello

  You suggested that this light doesn t work since the replacement of the motherboard.
  Am I wrong? In my opinion this is something mechanically. Can not solve yourself.
  In this case I recommend to contact the ASP again and explain the situation. Generally, the warranty should cover the repair procedure.

• New on Satellite Pro 6100 WLAN card installed, but can not be activated

  Hi, just replaced the internal Wireless LAN card on my laptop Satellite Pro 6100. Map of yesterday and today have the same problem: I can't turn them on. They are installed properly and supposed to run in what concerns the XP drivers, but does not detect wireless network andy saying it is "disabled".

  I tried upgrading to the latest version of BIOS
  I reinstalled the latest drivers
  Toshiba network device switch sees only the Intel Pro/100 VE wired, network card, but not the card the Intel Pro/Wireless 2200BG.
  Direct activation of the Wireles does not produce a said connection disable, enable, trying to connect, but it fails, as if he did not see the network.

  Past and present, wireless card fail to see any network.

  Martin

  Hello Martin

  This model of laptop is quite old and at that time 2200 card was not on the market. I can imagine that there is a compatibility issue.

  I think for older models of laptops, the best solution is the use of a faster but external solution in the form of PCMCIA or USB WLAN card. With the help of these cards you will not have compatibility issues.
  What do you think of this?

• Graphics card Quadro 4000, installed in the Mac Pro, but CS5.5.2 will not enable playback of mercury. I ' watched v

  Graphics card Quadro 4000, installed in the Mac Pro, but CS5.5.2 will not enable playback of mercury. I ' v looked but can't find any information. Install the cuda driver 4 - 2.2.10 said if Nvidia running OS 10.7.4 driver install is not necessary. In CS5.5.2, the parameters of the project, general, video playback and rendering, the only option is only the MPE software and it is grayed out. I tried to restart the computer.

  as a side note when I open PP I get an error - video filter missing AE > ADBE SubspaceStablizer missing - I don't know what this means, but do not think that it has nothing to do with the issue of mercury reading.

  I also downloaded driver Nvidia - Quadro ODE graphics driver. Under Nvidia drivers downloads, it gives several options for the 4000 Quardo for Mac, but the only one that will download is the graphics driver ODE.

  IM new to this so I really appreciate your help.

  Thanks - John

  the last two posts fixed the issue of the mercury playback engine not activated GPU accelerator. I hope this helps someone else. Thanks for all the help I received.