Satellite Pro M30 and Fan repair

Hello
I need help, my satellite M30 is very noise after 5 years of use. This is the only problem with this laptop.
So I want to fix for current use.
Maybe someone can help me fix / change the fan, I am qualified in computer repair, but I Don t know how to do with a laptop especially with mine.
How open the chassi, what spare parts, I need etc?

Thank you very much for the reply and help me

Sebastian

Hello Sebastian

Is maybe your laptop full of dust and must be cleaned.
After cleaning it laptop can take a new breath and material can be cooled properly.
With an air cooling pure grill will not be blocked traffic and the fan may operate at high speed.
Once this laptop runs much more silent than before.

What do you think?

Tags: Toshiba

Similar Questions

  • Satellite Pro M30 and eSATA

    Hi all

    I recently bought the external drive western digital mybook premium ARE. This disc has an eSATA (external SATA) port.

    The problem is that my satellite pro m30 (model #: psm35e0021jar) is not the external SATA port. I found an ADDONICS (eSATA, ExpressCard 34) and another similar product from SIIG (eSATA II Express Card).

    The question is:

    1.) these products going to be compatible with my fairly old laptop?
    2.) is the hard drive of my laptop SATA technology is or what?
    (3.) what brand of motherboard used in my laptop?

    Thanks in advance and I cannot wait for the answers.

    Hello

    1.) these 3 products of third parties are not known to me, but as you know the Satellite Pro M30 does not support a SATA interface and if you want to upgrade the HARD drive, you will need to use the HARD disk with interface IDE (ATA-5) increased.
    (2.) No, as indicated above the laptop supports the IDE and not SATA
    (3.) the Satellite Pro M30 using motherboards Toshiba ;)

    A hint; If you have a SATA HDD, you can use it as a external HARD drive. This HARD disk can be connected via external USB sata controller.

  • Satellite Pro M30 and start USB HDD

    Hello everyone.

    Is it possible for a Satellite Pro M30 (Bios version 1.70) to boot via USB HDD?

    Thank you
    Vittorio

    Hello

    No, the upgrade of the BIOS will change any possibility of starting.

  • Satellite pro m30 cooling fan

    Hello...
    I have a satiellite pro spm30 model, it took sirvice Center because the machein becomes Veery hot & I do not taken cooling fan at all, when I connect to the net computer frezs if I open multiple pages and he returned after a protest and continue to do it.
    Srvc.Ctr.told me your changed the mother board fan becase is bult in it.and they have updated the system bios.
    The problem still excist and still not hear the fan running at all.

    How can I test the operation of the cooling fan?
    what you recommend me to do?
    Help, please.

    CONCERNING

    Hello

    As far as I know, you can find a lot of applications to test and maintain the fan settings.
    But it is very dangerous because by using this software you change the thermal management of your laptop. These programs are not supported by Toshiba, for any damage caused by this program is not covered by the warranty.

    YOU USE THIS PROGRAM AT YOUR OWN RISK!

    The only issue is the Toshiba Service partner, but
    Contact them again.

  • Drivers for Satellite Pro M30 PSM35E XP/Vista

    I tried without much success to the drivers for my Toshiba Satellite Pro M30 computer laptop (PSM35E-000NU-AR).
    I have not found a link to the drivers on the toshiba europe site!

    Please can someone help me to get the drivers?

    Appreciate your help guys/girls.

    Hello

    It is an old notebook series and that's why pilots have been moved to the archive area

    Choose from the download form first Archive-> Satellite Pro-> Satellite Pro M-> Satellite Pro M30 and you will find the drivers.

    See you soon

  • Satellite Pro M30 - compatible DVD players

    Hello

    I have a Satellite Pro M30 and the optical block has problems, recognizing most of my DVDs.
    I want to change the drive, does anyone know which are the models compatible with this machine?
    The real player is Toshiba DVD - ROM SD-R6112.

    Thank you
    Daniel

    Hello

    As far as I know this unit has DVD +-R/RW (DualDrive) and in my opinion the best solution is to swap it with the same. On this way, you will be sure that everything works correctly.

    Unfortunately, there is no public document on the hardware upgrade and just Toshiba service partners can tell you more about it.

    Good bye

  • Satellite Pro M30 Bios Update

    Hello

    I have a satellite pro m30 and I would like to make a bios update. Utility hardware Toshiba says that my bios version is 1.4. The existing updates see 1.2, 1.6, but it says nothing about 1.4.

    Should I take 1.6?

    Any help?

    Thank you

    Hello

    It might be possible that the BIOS version 1.4 is the version of BIOS default manufacturer for this model.

    In my opinion you should take the 1.6 version because it is the most recent and it may be necessary!

    Here is the link: http://eu.computers.toshiba-europe.com
    go to Support & Download - Download BIOS - choose your M30 SP and click for the Description of BIOS for more information!

    Bye Bob

  • Toshiba satellite pro m30 USB problem

    I have toshiba satellite pro m30 and HP scanjet 4600 scanner.when I connect the scanner directly to the notebok with its ' original usb cable there is no problem. But if I connect the scanner to the laptop with a laptop usb extension cable cannot initialize the scanner. There is no problem if I connect the scanner to the VAIO laptop with usb extension cable. What can I do?

    Hello

    could you describe the difference between the original USB cable and the USB extension cable?

    The laptop and the printer works correctly with the original USB cable, but it seems that the extension USB cable is an inexpensive which does not fulfill the technical specifications and the laptop has a problem with this issue.

    To solve the problem in my opinion you could do an update of the BIOS, look if for your printer is a new driver available and reinstall the USB drivers.

    Also, you could test whether USB, the same problem occurs with other cables.

    Bye Bob

  • Satellite Pro M30 modem problem

    I have a portable Satellite Pro M30 and I try to install the modem driver. Everything is ok, but the modem has problem. In Device Manager, it seems to be fine without conflicts. Each time than trying to query the modem of the property page, it shows me a message concerning the opening of port.

    I read a lot of articles and I thing the problem, this is the version of the driver. The driver that I use is the SM2138ALD04 version. Have any ideas?

    Hello

    I agree with you, I found also several threads to have reported similar problems with modems
    No doubt this procedure will help you:

    -go to the Device Manager and remove and uninstall the modem driver
    -Download the latest modem driver
    -restart the OS and reinstall the modem

    Please report did it

  • How can I reset password BIOS on Satellite Pro M30?

    Hello!

    I have a portable Satellite Pro M30 and my son has changed my bios password and now I can't even start it! How can I reset the bios? Where is the bios battery out of MB, then reset as in desktop? Is there a jumper for the deal if all else fails? What should I try?

    Thank you all in advance.

    John.

    Hello John

    Remove the CMOS battery didn't help much. If the removal of the BIOS can be so easy, remove the password on the stolen units may be too simple. Please don? t wait that these information will be posted here.

    You can contact the after-sales Service of Toshiba partner. They will remove password for you.

    Good luck!

  • Satellite Pro M30: upgrade memory

    I have a satellite pro m30 and I want to change memory and I was wondering if it supports DDR2?

    Hello

    This device supports PC2700 DDR - RAM. In addition, you can upgrade the memory for max 2048 MB (2x1024Mo)
    These modules are supported

    PC2700 256 MB (PA3311U - 1 M 25)
    PC2700 512 MB (PA3312U - 1 M 51)
    1024MO PC2700 (PA3313U-1M1G)

    Good bye

  • Satellite Pro M30 - HDD upgrade up to 160 GB

    Hello

    I have a portable Satellite Pro M30 and I want to move the hard drive to the maximum size supported.

    As I see from previous posts of the preinstalled bios supports up to 128 GB, so the questions are:

    1A everyone updated bios to support larger sizes (e.g. 160 GB)?

    2. the link suggested for bios updates (http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_bios.jsp?service=EU) does not provide an option for the M30 (only M70) series. So what one do I download for M30?

    Thank you

    Hello

    First update the BIOS will not help you get a possibility of using a 160 GB HARD drive.
    The fact is that the M30 Pro Sam has an interface IDE (ATA-5) and this HARD drive controller supports LBA the28bit
    So in my opinion the 160 GB only are not supported.

    By the way;
    You can find the BIOS and the driver for the Pro M30 sitting on the Toshiba driver page.
    But to look for the area of _ARCHIVE_!

    Concerning

  • Satellite Pro M30 - how to remove dust from fan

    I have a model satellite Pro M30 about 5 years.
    It seems to run hot and the fan seems to work a lot in the background.

    I was told to clean the dust around the fan, it's a big job.
    According to me, that there are a lot of screws on the bottom.

    Can help a whole based on do it myself

    Hello

    You do not need to disassemble the laptop.

    You can remove the dust and debris using a jet of compressed air.
    These aerosols can be purchased from the local computer or online dealers.

    I do from time to time to make sure that my laptop would not overheat and guess what; It is useful!

    Check it out.

    Welcome them

  • Screen jumping and overheating issues on my Satellite Pro M30

    Hey everybody!

    I have a Satellite Pro M30, the screen seems to wobble a bit, probably due to a loose hinge. Can you please help me with this problem?
    In addition, my laptop seems to overheat, how do I clean the dust to stop overheating?

    Thank you

    Hi mate!
    For the screen issue. As it is a hardware thing, I suggest that contact you a local ASP. Of course, you can try by yourself to this problem, but I can say from my own, fitting the screen isn't the easy thing to do on your own, if you have no experience in that.

    To clean your laptop from dust, you can use compressed air jet. Also make sure the cooling modules are not blocked by objects on your table, because if you've blocked, warm air ponds and cannot be updated.

  • Satellite Pro M30: I need network card wireless that supports WPA and 54mbits

    I'll buy a new adapter wlan... for my toshiba satellite pro M30.
    myOne only supports wep and 11 Mbps and I need a faster that supports wpa and 54 Mbps.
    Whisch wireless network adapter is the correct?

    I read in the forums, this ist a bit more complicated because of the bios, chipset and connectors...
    could someone tell me what card is ok?

    Thank you

    Hello Michi

    It is not easy to give you accurate information, but if your laptop is the Intel Centrino mobile technology you can use of LAN Mini PCI Intel PRO/Wireless 2200BG adapter. I have the same WLAN card and can use WPA and 54mbits data transfer speed.

    If you want to be sure, try contacting the Service of your country partner. They should know this for sure.

Maybe you are looking for

  • I have my email is tiny I didn't adjust my computer settings how concrete this action

    I was checking my email I went to compose a letter everything went really small, I don't know what was going on.as I continued to write my letter to someone he still smaller, please can I have help with this thanks is there a way to investigate with

  • side chaining

    Since the last pro X update logic, I can't find the switch "side chain" in the compressor, do you know where is it?

  • [Z70] Error starting LibStartStub.dll

    I had the Lenovo Z70 located a short while and everytime I turn on the machine, I get the error message - RunDLL - there was a problem starting C:\Program Files\Lenovo\Communications Utility\LibStartStub.dll How can I get rid of this? Comment to Mode

  • Clear any open task daqmx

    Hello I was going crazy, because all of a sudden a tasks analog output did not work any more he said it conflicted with another task "always active"... I searched my entire application. Could not find anything. So finally, I closed the application la

  • How can I do a vi that opens other screws

    How can I do a VI that allows users to choose 1 of 2 other vi s to run and once the user chooses the vi they want to run, the original 'chooser' vi stops and only the "elect" vi is left in the market?  I have included a picture of how im tryign to do