Satellite Pro A200 - new RAM work together

Similar Questions

• Satellite Pro A200 - Webcam stop working after 10 to 15 minutes

  Hello

  I need help to solve this problem. I use the Satellite Pro A200 with Windows Vista. When I use my computer online my web cam stop working after and never restart again until my computer restarts.

  Please send me some suggentions how to solve this problem.

  Thank you [email protected]

  Hello

  How did you notice this problem? You get an error message or something else?

  It's really hard to say why this happens, but first I would try to update the driver for the webcam. You can get the latest version on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Install the latest version and try again.

  By the way: you run factory settings or you have installed your own version of Windows?

  Welcome them

• Satellite Pro A200 - SD card works only on Windows 7

  Hello

  I tried to install Windows 7 rtm downloaded from the MSDN site. Once I installed it, my Satellite Pro A200 works fine, but the built in SD card reader does not work, that nothing happens when I insert an SD card, it is not recognized.
  Can anyone of you help me?

  Thank you very much.

  Francesco.

  Excuse for my English.

  Hello

  Have you installed a driver for the SD card?
  OK you will not find a Windows 7 driver yet, but most of the Vista drivers are also work on Windows 7.

  Normally you need a driver for the SD card, so you may notice yellow exclamation in Device Manager?

  What types of SD cards are you trying? In the user manual, you can find a list of supported SD cards.

• Satellite Pro 6000 - new RAM does not work

  Hi all

  New to this forum sorry if this was asked before, I did a search but could not find anything so here goes.

  I just bought a new RAM for my Satellite Pro 6000. When I install it nothing happens the laptop won't boot. If I put the old stick in no problem. The ram I bought is unb 512 MB PC133 CL3 and old RAM 256 MB PC133s. I think little small to read with these old eyes.

  I was told I might need an update of the BIOS but cannot find one for my laptop under 1.4 for the moment.
  Any help would be thank Lindsey

  I think that the new RAM is not compatible with the motherboard or laptop.

  The manufacturing of the new RAM you said does not for me so I would buy an another RAM, such as Kingston. Kingston makes high quality RAM and many users here buy Kingston RAM to upgrade its RAM.

  By the way: do you use the RAM or only the new? Normally, if you use two memory modules live, you must use it with the same specifications.

  The update of the BIOS, you can find the Toshiba site, but this doesn t affect the compatibility of Aries.

• Satellite Pro A200 - new ODD ignors the recovery disk

  Hello

  _Satellite pro A200-PSAE4E Windows XP_

  I started having bad 'not ready' system on the STRANGE original errors. Report of Toshiba Disc Creator: TSSTcorp CDDVDW TS-L632H TO01. I tried the FW update, but that did not help.

  I replaced the STRANGE with a new Amazon. Report of Toshiba Disc Creator: TSSTcorp CDDVDW TS-L632H SC04. The STRANGE news is listed as appropriate in the manual - it is the same model as the original. The STRANGE new works fine for normal use in XP. But when I try to use the recovery disk, it is ignored and XP always starts on the HARD drive. And when I press F12 during startup, the STRANGE news is not listed.

  Can you help me get the STRANGE recognized at boot time, please?

  Thank you.

  Mike

  Hello

  Have you ever tried to load the settings by default in the BIOS and is it recognized in the BIOS setup? The default values of the BIOS, you can load if you go into the BIOS, press the F9 key and save & exit the BIOS Setup. Then, restart the computer and try again to start from ODD.
  Can you change the boot order and set the STRANGE as first boot device?

  If it doesn t help I'll try a BIOS update. The most recent BIOS can be downloaded on the official website of Toshiba.

  But it s really strange the player works fine on XP, but you can start with him t

• Satellite Pro A200 - shows only 3 GB instead of 4 GB of RAM

  Hello

  2 years ago I had a Satellite Pro A200 as a professional laptop and it works with XP SP2, later with SP3. With 2 GB, it shows 2 GB memory in Windows - and I know it's a Radeon 7500 with 256 MB memory graphics individual, and there is no shared memory.

  I upgraded to 4 GB, but Windows shows exactly 3 GB. BIOS shows 4 GB and ATI system monitor shows 4 GB. I know that 4 GB is not possible under XP 32-bit, only on Windows 2003 R2 32 bit or Vista - but on desktop systems, I've seen values between 3.3 and 3.7 GB.

  So, where's the memory? It looks like a bug - the chips of memory have two 2 GB I checked this. Because it's a company laptop I can not just switch to 64-bit XP :-(

  There's no option in the BIOS - first I thought that it is the graphics card, but mine has independent graphics with own memory so that the computer comes up with MB 2048 or 4096 after the upgrade.

  Shared memory would show about 1900 MB of RAM for the operating system as my private EEEpc.

  Hi shadowmaster_1,

  > I know that 4 GB is not possible under XP 32 bit
  Then why do you ask this question here if you already know? Moreover, it s not a limitation in XP, it s a material limitation on all 32-bit systems

  > only on Windows 2003 R2 32 bit or Vista
  And who says that Windows 2003 or Vista can use 4 GB? Okay, there's an update for Vista where 4 GB correct displayed in system properties, but that doesn't make no difference. Vista 32 bit peut t use all of 4GB, it s only cosmetic improvements! ;)

  > So where is memory?
  Memory is installed on your computer, but can t be used complelty with a 32 bit OS.

  At the end of the story: If you want to use 4 GB, you need to install a 64 bit OS. On all the 32 bit OS, you can use only upward to ~3.2GB RAM!

• Satellite Pro A200, Windows XP, 4 GB SDHC card will not work.

  Hello

  I had a Satellite Pro A200 installed with Windows XP, SP2 for some time - no problem, a great piece of kit. However I have recently bought a new camera and splashed by a Kingston 4 GB SDHC card. The manual for my A200 to indicate seemes that it my laptop is compatible with SDHC 4 GB cards but when I push the card in the blue LED flashes and then nothing happens. My SDHC card does not seem to be recognized by the system.

  I see no error in the log of the events of my OS and I checked the slots operation in trying an old 512Mb SD card and works very well.

  Anyone can offer help please?

  For reference, this laptop is a PSAE4E A200 model.

  Thanks in advance

  Simon

  Try this fix XP to enable SDHC support

  http://support.Microsoft.com/kb/934428

• New Satellite Pro A200 does not charge

  I have a new Satellite Pro A200, I've had for about a week. Initially he was charging fine, now it won t load and I have to run to the network it all the time. For the first few seconds after lighting it seems to be loading it then does nothing.

  Can anyone suggest what could be the problem? Or should I return it?

  Thanks in advance,
  CAT

  Hello cat

  Before you start to speculate on potential problems I recommend you contact your dealer as soon as possible. The laptop is new and everything should work fine. The behavior described is certainly not normal and may be that something is faulty.

  Please contact your dealer and explain the situation.

• Satellite PRO A200-1 s 1 with Windows 7 x 32. Touchpad does not work

  Hello world
  I installed Windows 7 on my Satellite Pro A200-1 s 1, recovered all the drivers on the Toshiba site, everything works fine (less than the webcam that doesn't work even with the previous s.o. XP or Vista...). But my Touchpad does not work... No Fn + F9, no drivers, nothing works. And in my control, Manager of Panel devices seem to be going well.
  Any suggestion?

  Hello

  You reinstall the driver for the touchpad?
  Check it!

  Also check if the option disable touchpad when USB mouse is connected is not checked. That are in the control panel-> mouse-> device settings

• Satellite Pro A200 - does not start with 4 GB of RAM

  Hello

  I installed 2 x 2 GB, but it seems that it does not work. The funniest is that when current to run just a bunch of memory (2 GB so) it works, when you run both, it does not work and it freezes. This is the Samsung 2 GB 2Rx8 PC2 - 6400 s - 666 - 12 - E3

  Ive' installed the BIOS (64 bit v2.60) was last updated for the Satellite Pro A200 and I am running Windows 7 64 bit

  Hi caribman

  What Satellite Pro A200 you have exactly?

  I ask this question because some A200 models were equipped with chipsets 943GML and these models support 2 GB only!

• Satellite Pro A200-1OM - Wifi does not work in Windows 7

  Hello

  I installed Windows 7 on my Satellite Pro A200-1OM.
  I have updated all the drivers to the latest version.

  But I can't use my WLAN adapter more.
  He always says that there are no networks available, but my access point is standing next to my laptop and on my other laptop, I can see it.

  My wifi adapter is turned on.

  Miet

  Hello

  You don't see any or another WLan in your environment?

  Are you sure that the WiFi is enabled on your laptop computer at 100%?
  Please note that you need to move the material WLan switch and the LED should be on. In addition, you will need to activate the WLan using FN key combination + F8 performs this work!

• Upgraded Satellite Pro A200 - 4 GB of Ram, but I have only 3 GB

  I have a satellite Pro A200 and I uppgraded from 2 to 4 GB of Ram.
  It was not a problem as long as I have didn't ' tt start Windows Vista.

  In the back when the memory is counting upp there are 4 GB (40XX something) but when I loggen into victory. There is only 3 GB left.

  Whence my A200 Sat stuck the other 1 GB?
  I have now that the graphics card takes upp to 250 MB, but there are still some 750 GB is not there?

  Is there anyone who can help me and solve this problem, I'm just 100% satisfied with my A200 but it buggs me that is missing 750MO I SEAP for.

  Hey Buddy

  For several years he s already known that the Windows 32 bit doesn t recognize all of the 4 GB due to the limitation of the 32 bit OS.
  I think you should visit the Microsoft good, old for details ;)

  For example this one:
  http://support.Microsoft.com/?kbid&ID=929605

  Best regards

• ODD has stopped working on the Satellite Pro A200

  I have a Satellite Pro A200 - PSAE1E.

  The CD/DVD was working fine and then stopped. I put in another CD and it went through the process of trying to find - but could not.
  It ejects the disc. I tried with other CD in the same direction. Yellow light works during the research process.

  I tried to remove the CD from the Device Manager and remove entries of regedit (as suggested on another thread) all without success.
  The computer is a little over a year old and I have no recourse to assistance centers as I live in West Africa.

  Can anyone offer any suggestions?

  Hello

  Is it possible to boot from the recovery disc?
  I mean the CD/DVD drive reads the original disc Toshiba and it of possible to read other CD or DVD from different manufacturers?

  If all the other disks are not readable then the question looks like a WEIRD error and in most cases the STRANGE must be replaced.

  PS: Please note that if you try to boot from the recovery disc then start a recovery procedure will format the HARD drive and reinstall it the entire image of Toshiba.

• My Satellite Pro A200 (PSAE7E) touchpad no longer works

  Dear Sir.

  My problem is my touchpad does not work, I usually enable it or disable it in a tab to hide automatic at the top of my desk (which was disappeared after I updated to Vista SP1), after that and accidentally stopped the pointing device driver,

  I tried to re - install again but I could not find out who the good driver for my laptop is (ALPS Synaptics pointing device or pointing device)?

  I tried to press FN + F9 key but I had no change that the touchpad is not working, so I have to use a USB mouse...

  Can you help me please

  Note that I'm using Windows Vista Business SP1, Toshiba Satellite Pro A200 (PSAE7E)

  Thank you very much

  Zaid

  Have you checked the Device Manager? Normally, you should see what touchpad you have exactly.
  So the latest driver, you can download the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online support & downloads-download drivers online

  Check it!

• Satellite Pro A200: Card reader does not work after installing XP

  Hello...

  I deleted Windows Vista from my Satellite Pro A200 for XP Home.
  I'm much happier with the machine now, but I am unable to get any response from the card reader. There is no mention in the manual supplied with the machine.
  I cannot find any reference to it in the Control Panel hardware Manager and nothing changes here in it when I insert a SD memory card.

  I had no cause to try the drive before removing Vista, so I don't know if it never worked... Although I guess he did.
  A search of a pilot running in the download section had no success, and this forum has no direct answers.

  Does anyone have an idea what I have to do to make this work?

  Mintin Popa.

  Hello

  I put t see serious reasons why your card reader shouldn't run with installed Windows XP t/function.
  What you need is the right driver.

  The Toshiba driver page provides all the drivers Win XP and there is also an XP driver for the multi card reader.

  You need a Texas Instruments Flash Media Driver. He is a driver for your bridge Media Slot.
  This slot allows you to insert an SD card, Memory Stick (Pro) or xD picture cards.

  See you soon