Satellite Pro 4290 and Belkin G + MIMO - Internet access card is not possible

Similar Questions

• Satellite Pro A60 - installed Belkin Wireless but can't find a wireless adapter

  Hello

  I have a Satellite Pro A60, and late last year, I restored the disk hard as he saw all sorts of questions. After that it worked fine, everything fine, reinstalled outside the wireless card. I tried several times to reinstall my Belkin Wireless PCI card that slots on the side, but when I do (using the Belkin internet software make sure is the right one) it comes up saying ' found Incompatible driver version. Failed to load the application '.
  After restoring I reloaded the stuff about the tools and utilities disk (most of it anyway and all relevant esp network), after that I reloaded XP SP2 (would I have done that first?) Is this the problem?)

  Belkin card tells me that I have no adapters (huh?) but when I go to the information system there is no problem of devices and Im not really sure whats missing - clearly something is but that? Im not great with computers so would really appreciate the help!

  The device manager didn't show any problem devices.
  But the installed wireless card has been published in the device under network adapters Manager?

  The Toshiba recovery image contains a Wlan card and software driver Atheros Wlan Card. It is perhaps a reason for the problem, try to remove this software from the operating system.

  However, for me it looks like you used any compatible WLan card
  I discovered that the Atheros AR5001X Wlan card could be compatible

• Satellite Pro 4290: dead on AC, OK on battery

  Hello

  I posted this comp.sys.laptops, but without response. I just found this forum. I hope someone here has an idea...

  Here's the problem:

  My trusty old Satellite Pro 4290 has started to work only intermittently on current alternative - jiggling the power connector would operate. I assumed that 7 years to plug or unplug the adapter had declined the articulation and cracked welding. So, I opened, removed enough course of the joints power connector and the motherboard had cracked on the underside of the motherboard. a quick bit of welding and it was good as new, or so I thought...

  However, when he was all wound up, I had * no. * power at all - no green power light, and it was quite dead. I installed a battery and it worked fine - but it's only a very short-term solution since the battery is not recharging because there is no AC!

  I have:
  * put a voltmeter on the output of the adapter sector; Stable 15.25V.
  * put a voltmeter on the side of the motherboard from the power connector; Stable 15.25V.
  * put a voltmeter on various points of motherboard on the ground; Stable 15.25V.
  * disassembled and re-assembled 3 times to check the spleen connectors etc.
  * starts in Windows (XP Pro) and Linux (PCLinuxOS 2007) - two related works on battery only and not charging
  * Google for a manual technique/diagram without success

  The Council seems to be powered and now, I'm stumped. The laptop don't owe me anything - it is 7 years and its 3 ^ rd ^ battery, 2 ^ nd ^ food and 3 ^ rd ^ hard drive! There is no need to spend a lot of money on, but if it is something simple that I'm missing I would really like to get it working again.

  Any ideas?

  Thank you.

  Andrew Woodward

  Hello Andrew

  I'm sure that nobody here can give you precise response and accurate instruction how to fix this. It seems that you have very good technical knowledge and you know that you cannot do much without exact schematic manual. Unfortunately, maintenance manuals is not the public act and I'm really skeptical, you'll be able to find it somewhere.

  In your case, it may be just power supply electronics issue. What you can do is check the eBay from time to time and try to get the new motherboard.

• What is the difference between the Satellite Pro 4200 and 4300 series?

  As mentioned in another thread, I have a SP4220XCDT that died on me.

  I bought a mobo on ebay which was a 4290 and today it happened, but the problem was that there was an apparently fixed CPU, which stands out much less of the Council than that of the Board of Directors 4220 and therefore does not connect with my 4220 cooling mechanism.

  At least something comes on when I start now, but unfortunately he has passed the Toshiba screen that tells you to press F2 for boot sequence.

  Having also spent money on a new CPU and memory, I don't want it let go and I've seen a motherboard available suitable for a 4320/40/60 - does anyone know if it will agree with the rest of my 4220? It doesn't have a cpu so presumably will have the same mechanism as the motherboard 4220.

  I'm assuming that these may be compatible since I managed to find a pdf of a service manual that covers both the 4200 and 4300, although unfortunately the first page is missing, so I don't ' know if that highlights any differences.

  It's frustrating that there's no PDF for these older models, at least with the plug on them, and it is very difficult to find info.

  As usual, thanks for any help!

  Hello

  As far as I know the two series using the Intel Mobile Pentium III with MMX microprocessor? Technology.

  I discovered these details:

  Satellite 4260 series: Mobile Pentium III 450 MHz
  4270 satellite series: Intel Mobile Celeron 500 MHz
  Satellite 4280 series: Mobile Pentium III 500 MHz

  Satellite 4320 series: Mobile Pentium III 600 MHz with Intel SpeedStep technology
  Satellite 4340 series: Mobile Pentium III 650 MHz with Intel SpeedStep technology

  Portable measures should be also the same. So in my opinion, it should be possible to use the same motherboard for Satellite Pro 4200 and 4300.

• Satellite Pro A300 freezes when on the internet

  Satellite Pro A300 freezes when on the internet & the only way to turn it off is to take out the battery. Bought new Dec 2010 & is under warranty - suggestions?

  Hello

  have you tried to update drivers Lan (wlan)? What browser do you use? I guess, the Internet explorer, try firefox or opera. Also, your computer may be infected with the virus, or blocked by the firewall. Have you installed software before it starts? Is this ok when you bought it? I ask you too, because you do not have a lot of information.
  It is especially the driver, software problem.

• Satellite Pro A60 and Port Replicator

  I JUST BOUGHT A SATELLITE PRO A60 AND USB2 PORT REPLICATOR. WHEN I ATTACH MY LASERJET 1100 AND PRINT A TEST PAGE IT PRINTS WELL BUT IF I PRINT A WORD DOCUMENT IT RELEASED FOR EXAMPLE GOGGLEDYGOOK. CAN YOU HELP ME?

  Hello

  I understand your problem in this way.

  You have connected the printer via Port Replicator ports for the A60 SatPro.

  Œuvres driver and so on correctly because the test page can be printed. But when you want to print from Word the printer isn't or what do you mean by "GOGGLEDYGOOK".

  Could you describe a little more detailly and give us some more information like Toshiba shipped OS or MS based installation, Service Pack installed, the name of the printer and so on...

  When you want to validate this information, it would be easier to help you!

  Bob

• Satellite Pro L40 and it crashes and freezes

  Hi guys

  I have a Satellite Pro L40 and it crashed on me a few weeks ago.
  It will turn upward, but everything freezes.

  They gave me a copy of Vista to friend, but this only loads until it said 74.5 MB necessary and only 74.4 on the partition so I guess it does not load the full program of vista.

  I don't have the original backup drive so cannot use it.
  Is my only need to get a new hard drive and if what kind do you recommend.

  Sorry if I have'nt it explains very well

  Derek

  In my opinion, it is always good to have original Toshiba DVD facilities. If you want to order a visit https://backupmedia.toshiba.eu/landing.aspx, and how much you should pay for it.

  As Akuma wrote before starting installation Vista delete existing partitions, create new and install Vista on it. I don't think that you need a new HARD drive.

• Satellite Pro 6000 and Windows Vista

  I bought a Satellite Pro 6000 and I want to put Windows Vista on it. I did an Upgrade Advisor and I was told that this graphics card will not work. Is this true?

  Thanks, Nick

  I'm afraid that's true. Satellite Pro 6000 is old enough for laptop and it will not supported in Vista. Install Windows XP Home edition and enjoy your life.

• The maximum size of HARD drive the BIOS sees in Satellite Pro 4200 and 4300 series systems

  I want to switch the HARD disk in my Satellite Pro 4340. I know the 4200 and 4300 SP series can take at least a 20 GB HARD drive that I've already updated a SP4270 and SP4280 drives from 20GB already.

  I did a search on assignments earlier re. Satellite Pro 4200 and computers portable 4300 series as various other contributors of this forum had already asked this question. A respondent suggested that they had installed a 60 GB HARD disk without problem.

  Someone at - it else mounted a big HARD drive (or more even) in these notebooks series 4200 and 4300 and managed to do work OK and had the BIOS to recognize the total size of the HARD drive?

  What is the largest swap HDD that someone did with success on these machines of 4200/4300?

  Unfortunately, you will not be able to find accurate information about it. All you can find are reports from other users. I am really interested about other views.

  By the way: 60 GB HARD drive is not sufficient for you?

• In UK buy Satellite Pro M40 and restore it

  : ^ 0 Hi everyone!

  Anyone know of any where in England who would buy my Toshiba Satellite Pro M40 and rehabilitate it and then sell it on?

  Thank you :D

  Want to sell your laptop Pro Satellite M40?

• Satellite Pro 4200 and wrong screen resolution

  OK, so I have an old Toshiba Satellite Pro 4200 and I m running windows xp professional on it and I ve been wondering because many programs do not work on it because of the resolution of the screen I want to know if there is a way to change.
  I know usually you access properties etc but when I try to drag, he does not slide remains at 800 x 600.

  So if anyone can help me on what I d really really really appreciate it.

  I'm pretty sure you don't l l install the display driver. It is necessary to use solutions above 800 x 600 screen.

  The drivers, you can download a Toshiba site but don t forget to look in the * Archives * because your laptop is not the most recent:
  http://EU.computers.Toshiba-Europe.com

• Problem with the Satellite Pro 2100 and new modules of RAM

  Hello

  I have a Toshiba Satellite Pro 2100 and I have a problem with the memory upgrade.
  My notebook of startup only if a plug-in module to a ddr, but if I insert the two modules IN CC led orange flashing start when I try to turn on the pc. The stop led not blinking unless I take out the battery and the dc adapter.
  Here is the code of the modules:
  KTT3614/256 (original)
  KVR266X64SC25/256
  256 MB pc2100 both.
  Starting the PC with any of them, as well as the modules are both compatible.

  Any ideas?
  (Sorry for my English but I'm Italian: D)

  Post edited by: DaK_TaLeS

  Hello

  the second location of memory perhaps is the problem.
  Try to start with a module in the second slot, first an empty slot.

  Good bye

• Option Internet PCI card does not work

  Last week I had format my Satellite and I had installed Windows 7, 64-bit, but now the Internet PCI card does not work.

  It says that my Radio power is off, even if in reality is not.

  I had the same card for Windows 7 Version, but unfortunately Internet update for nothing.

  Please can you help me.

  Thanks in advance

  Can you please tell us which model of laptop you have exactly?

• My iphone is disabled. I can't connect to itunes and icloud without my password.  It is not possible to do so while the phone is off.  What should I do?

  My iphone is disabled. I can't connect to itunes and icloud without my password.  It is not possible to do so while the phone is off.  What should I do?

  The steps here talk about everything that you can do other than take it to an Apple store with proof of purchase.

  If you have forgotten the password for your iPhone, iPad or iPod touch, or your device is disabled - Apple supports

• does not not all his sound and the device very bad speaker volume if not possible you help thank you

  Send OR you notice once more and I look forward to you helps maybe not possible with this problem-not working not not everyone - his device speaker volume and sound. Thank you

  d

  Hello

  ·         Have you tried the steps provided by Rob.C in this thread?

  ·         You receive an error message or error code?

  Please, try the steps indicated by the Rob.C of your previous thread and I would also ask you do not to create duplicate threads. This will not help you to get the instant solution to the issue that you are facing.

  Let us know the results so that we offer in addition to the steps to solve the problem of troubleshooting.