Satellite Pro 4330: code error error IDE #1

Similar Questions

• LED flashing - need to know the Satellite Pro 6100 POST error codes

  When I tried to turn on my Satellite Pro 6100 laptop the Green DC in power light turned orange and started to blink.
  It flashes 5 times, then 3 times then repeats.

  I guess that this indicates a failure in the system, but where can I find what means this error code?

  Hello

  You can read the flashing code very easily short flashing means 0 long average 1.
  Then you read the complete code back.

  Finally, the error code must be converted into HEXADECIMAL value and then a technician of the laptop could know what means this value.

  The ASP in your country should provide details of the mentioned error.

  Welcome them

• Satellite Pro A40 psa45e - error code: what is the problem of flashing

  I just bought the laptop above Satellite Pro A40 (psa45e - 0184 h - en), which came with a generic power.
  The great laptop worked until the other night.

  The light on the power supply is on, output is 15 Volt, turns on the laptop at the front, an orange light comes on and blinks 5 then 2 then 1, I guess the 521 error code.

  Unplug everything and the light goes out then two green lights turns on, then laptop has started twice and started upward (running xp) but then freezes.

  I guess the power supply stopped working and the chip has noticed the problem.

  Can anyone confirm the fault error is feeding or is there something else wrong.

  Need to know before you buy the Toshiba power, I don't want to lose more money.

  Help, please...

  How much is your generic AC adapter?

  The amps must be the same or greater than what your laptop needs. You can view the Volts + Amp requirements based on the laptop (serial sticker).

  So if the laptop needs 15v 8A... you need a 15v 8A or 9A 15v or AC adapter / higher CC.

  If the amps are too weak, in the custom of mobile devices get enough power and could cause damage.

  You should get yourself a good Toshiba adapter for peace of mind. Cheap generics can be more trouble than they are worth.

• Satellite Pro A10 fails to start - IDE #0 ERROR

  On startup, I get the Toshiba start screen and there is a regular click from the HARD drive. After 20 to 30 seconds, I get:

  ERROR IDE #0

  then a pause, followed by the following codes of boot agent (Intel FE v4.1.09)

  PXE - E61: Media test failure, check cable of
  PXE - M0F: Exit Intel Boot Agent
  Insert system disk in drive.

  I have the unpleasant feeling that the HARD disk is dead. I can replace it if necessary, but is it possible to extract the files from it before going so far?

  That is a clear symptom of a HARD disk failure.
  The + IDE #0 + error means that the BIOS didn't recognize the HARD drive (due to a hardware fault probably) and cannot start from the HARD disk.

  Then he pushes in the alternative startup > LAN
  The + PXE - E61: Media test failure, check cable + error because the laptop can not boot from LAN.

  I think that you just have to replace the HARD drive and then you need to reinstall new OS.

  This will help for sure.

• Satellite Pro A40: Lost CD-Rom - ide #1 error on initialize to top

  I lost the use of my cd-rom suddenely and can no longer play cd/DVD.

  It is not recognized in the 'my computer' screen either and when I went to "run" and looked in the MSINFO32 - cd it shows no drivers.
  Also showing an error ide #1 in trunk = upward.

  Y at - it a fix for what someone knows it please?

  Hello

  What is the BIOS? BIOS recognizes the installed CD/DVD drive?
  Generally, the CD/DVD drive is connected to the #1 IDE controller. If the drive cannot be recognized by the BIOS the #1 ide error.

  Maybe it s not a serious fault and just a touch loose?  :|
  Try to remove the CD/DVD from the laptop drive and start the laptop without WEIRD. Then stop, reinsert the STRANGE and access the BIOS to see if the STRANGE has been recognized correctly!

• Satellite Pro C660-111 - error creating recovery DVDs

  Hello

  I am trying to create recovery discs to aid Recovery Media Center to Toshiba for my new Satellite Pro C660-111. However, I have tried three times now and it gets about one-third through the first of two discs and comes up with the following error:

  Missing E:\Boot\bcd
  (Error 020123-F1-00000000 code)

  Help please! What I am doing wrong?

  Thank you very much
  Franki

  Hello

  What kind of blank DVDs that you use to create the Toshiba Recovery disk?

  Maybe the error is related to the disk, I used DVD - R Verbatim media and had no problem to create diskettes.

• Satellite Pro U200: BSOD error and sudden shutdown problem

  I have been using Satellite Pro U 200 since July this year.
  I had a strange problem. The problem began in mid-October where my laptop appears a blue windows error screen and restart. When the system will re-start the screen would flicker start and the operating system would not initialize correctly.

  It would give all sorts of error messages. Even if I tried to install a new operating system at this time where he would give error with the disc saying some file is corrupted. If you leave the phone turned off, it would again work normally.
  The disc would normally work on other portable computers desktop computers.

  I sent it for repair and they changed the hard drive. But the problem has returned to a degree less after a week.
  He sent again and this time they changed the motherboard.
  But the problem is now back with the blue screen stop.

  It's a Toshiba U 200 1.66 GHz memory gigabyte hard drive.
  I bought the Canada and use it in England, there is therefore a Canadian power cable.
  I am using Windows XP Pro with Service Pack 2

  Any help will be appreciated!

  Is it possible that some application you use is responsible for this? If there is an error on the corrupted file, I'm a bit skeptical about a malfunction of the equipment.

  You did some hardware upgrades?
  Check Please also this interesting article on the BSOD http://articles.techrepublic.com.com/5100-10877-6053684.html

• Satellite Pro A60: Blue error screen

  I got my satellite pro A60 laptop for about 6 months and, recently, a blue screen started flashing up to white writing scrolling down really fast and then the laptop restarts. I don't have the time to read what says the writing of this article. Can someone give me advice on what this could be and how to solve the problem?

  Thanks in advance.

  Hello

  Well, the simple is to reinstall the operating system. But if you wish, you can disable the function of Windows Xp to automatically read this massage of error on reboot.
  Go to system in Control Panel. Then the Advanced tab. In the announcement of the Startup Recovery section press set button. You need to disable the option automatically reboot.
  But it of very difficult to understand the error blue screen for ordinary users.

  Good bye

• Satellite Pro L870-172 error 003 when retrieving the recovery DVDs

  Hi all

  Having a devil of a time with this portable darn. So I bought the recovery dvd. tried to boot from the disk and comes with no OS bootable. Thinking it could be a problem with the optical drive, I created a bootable usb key.

  Received the usb key to start

  So I goto Toshiba Recovery Wizard
  Press Yes to say it will wipe the drive.
  Retrieves the software factory default
  In the end, I get an error message

  Error: 003
  Recovery error

  Press ok to start the computer

  You can see the final screen here.
  https://DL.dropboxusercontent.com/s/1fq5yk4t9hjhmk9/2014-09-05%20at%2012.38.PNG?DL=0

  Can anyone help plleeaaaseeee.

  The only thing I can think is that maybe when I created the USB startup key should I copy then disk2 on the stick as well using xcopy.

  I think there are several reasons for the error.
  The recovery media or the hard drive is may be defective. Wrong settings of the BIOS, etc...

  I recommend you to check once more the Toshiba Recovery bootable disc.
  I don t think that there might be a problem with the optical disc drive.
  From my point of view, it could be a bad BIOS setting.

  The Satellite Pro L870-172 has been pre-installed with the system Win 8.
  Please check start secure as well as the UEFI boot mode option in the BIOS.

  Generally, in order to be able to boot from different devices to boot, secure boot must be disabled.

• Re: Satellite Pro A120 - CD error appears

  I have problems with a laptop Satellite Pro A120. When the laptop is turned on it is possible to open the CD/DVD drive, so I know the drive functions.

  "However, when the laptop is turned on, the computer displays the screen"in touch with tomorrow TOSHIBA"for a long time, and then the screen goes black and the message CD ERROR" appears. Drive D and does not show on explore.

  I found the instructions to remove LowerFilters and UpperFilters of
  HKEY_LOCAL_MACHINE/SYSTEM CurrentControlSet/Control/Class/4D36E965-E325-11CE-BFC1-08002BE10318.

  by running "regedit", but during the restart, the laptop the problem remains.

  I tried also tried to launch the "Product recovery" CD from an external hard drive, but restarting does not account for the CD, but, once restart is completed, it can be seen that it that the external drive was saved.

  When the computer is disconnected on "memory which cannot be read" message is displayed.

  I would be very grateful for a quick response.

  Hey,.

  To be honest, if the CD-ROM error message appears before Windows starts, there seems to be a hardware malfunction. So maybe the CD/DVD drive is not recognized correctly, and therefore the Toshiba screen appears for a long time.

  Remove the caps and lowerfilters won't help you, it is a software based only

  You should look for a new CD/DVD drive. As a result, you can ask a service provider authorized in your country. They can offer you a compatible player. :)

  See you soon

• Satellite Pro P100 - Application error remote control Toshiba

  I regularly see the pop-up poster titled 'Toshiba Remote Application Error' whenever I start my Satellite Pro P100. I am running Windows XP Media Center Edition SP3.

  My question is - is - does anyone know what can be done to stop this error appear?

  Hello

  Try to remove it from the startup

• Satellite Pro A100 PSAASE: error Power Saver and LAN? After downgrade to XP

  Hello
  I have a toshiba satellite pro A100-psaase!
  I could not find this model on the toshiba site, so I chose the A100-psaas software.

  The laptop came with windows vista. I have it downgraded to windows xp, has chosen the psaas model so that I can download the drivers.

  I have 2 problems: the first is the eve of power software, it does not work. Start windows every time I get an error in the energy saver. I can not uninstall.

  My second problem is, that a windows pop who found a network controller and I can't find any software or driver for it. So in Device Manager, an exclamation point on the icon of the network controller.

  The funny thing is that I have internet and all.
  I can't find a solution to these two problems
  Thanks again

  Hello

  You have chosen the correct unit. The satellite Pro A100 PSAASE is the same model as PSAAS.
  I put t know why the power gain error appears, but for most of these errors occur because the tools and utilities have been installed in the wrong order!
  Seems that the installation instruction has been placed on the page of the driver Tosh! Read and follow the installation guide lines! Proper installation is important and necessary.

  The LAN drivers are also published on the page! There are 2 different versions. Try them both!
  The laptop supports a Lan Intel Ekron-R 82562GZ chip. Compatible drivers, you can also find on the Intel page!

  Good day

• Satellite Pro 4600: Setup error common modules

  Platform: Satellite Pro 4600
  OS: Windows XP sp2
  Description of the problem: while I tried to install the common Modules (for right OS and appropriate platform) each time get error title: serious body: installation is failed. Please make sure that reason then try the install again.

  Anyone had this problem before and knows how to fix / check what is causing the problem?
  Any suggestions, help appriciated.

  AFAIK, you must install the common modules at the beginning.
  The common modules must be installed before other applications of Toshiba

• Satellite Pro M10 Hibernate - error message "the file is not found.

  I have the Satellite Pro M10. I have problem in the power of Eve v6.00.04. When I want to activate the Hibernate mode it give a massage: * the file is not found. Please confirm the name of the specified file *.

  I can't use the hibernation mode. I tried to uninstall the Toshiba power saver and install again but the massage even come. If anyone has experienced the same problem and have a solution? Please advice

  When you active hibernating the operating system creates a file named hiberfil.sys in the root of your system drive.
  Of course, this file is missing in your installation.
  You can activate and disable hibernation in the system control-> power options.
  Disable hibernation, restart and enable again. Is there an error message? Maybe your C drive has insufficient free space?
  The size of the hibernation file is different from your main memory size.

• Satellite Pro A200-PSAE7: error on blue screen - ati2dvag infitive loop

  I've got Satellite Pro A200-PSAE7 with ATI Mobility Radeon HD2600. I downgraded to XP SP2. I get a blue screen saying that ati2dvag went infitive enough loop constantly. Any solution to this?

  OFFTOPIC: Why standart drivers from ati.com to display does not work? (while on my laptop of friends with also hd2600 mobilty radeon works fine).

  Hello

  > I've got Satellite Pro A200-PSAE7 with ATI Mobility Radeon HD2600. I downgraded to XP SP2. I get a blue screen saying that ati2dvag went infitive enough loop constantly. Any solution to this?

  The BSOD appears usually due to software malfunction serious matter or material.
  I think it s a software problem (driver).

  I presume that the BSOD appears why play games in most of the cases the graphics driver must be updated.
  If the XP driver from the Toshiba page will not help, you can try the graphics drivers on the www.omegadrivers.net site. 3rd third party drivers must run on your laptop. But note; 3 third-party drivers can be used only at your own risk!

  > Why standard ati.com display drivers do not work? (While on my laptop of friends with also hd2600 mobility radeon works fine).
  Cannot install the original ATI drivers on an easy path because this drivers don t support protection against overheating. Toshiba GPU drivers are slightly modified and support a protection against overheating. This protection is necessary and important as mobile graphics cards do not have large module of cooling as the GPU on to desktop computers.
  Temperature increases on the much faster laptops and so the driver graphic control performance of the GPU to reduce the internal temperature.

  That's why it of always advised and recommended to use the Toshiba drivers ;)