Satellite Pro 6000 after awhile without keyboard and rightclick

Similar Questions

• Satellite Pro 6000 and SD-R6472 DVD burner

  In response to my previous posting (now locked), the engraver of the SD-R6472 DVD can be used with Satellite Pro 6000.

  Firstly used the dreaded IDE 1 # error will be encountered, but not panic, this can be overcome by asking the Technical Support CSEL-Changer Toshiba Software and this will change the master/slave setting of the drive.
  After that, everything works fine.

  Hello

  Thanks for the useful information.
  I'm sure that this information will help other users who have similar problems.

  Good bye

• Satellite Pro 6000 and Windows Vista

  I bought a Satellite Pro 6000 and I want to put Windows Vista on it. I did an Upgrade Advisor and I was told that this graphics card will not work. Is this true?

  Thanks, Nick

  I'm afraid that's true. Satellite Pro 6000 is old enough for laptop and it will not supported in Vista. Install Windows XP Home edition and enjoy your life.

• How to remove the old fan and heatsink of the Satellite Pro 6000

  Hey people,

  Is there anyone who can help me with instructions step by step to remove the fan and the heatsink, I have a Toshiba Satellite Pro 6000...

  Concerning

  Barnie

  Try this guide shown here:
  http://www.irisvista.com/tech/laptops/Toshiba6100/Toshiba_Satellite_Pro6100_dismantle_1.htm

  The 6100 is almost the same as the 6000. This guide should be a big help. (Click on each image for a more detailed view).

  Kind regards

  chain

• Satellite Pro 6000; sleep function does not work after upgrade W98 SE to XP

  I bought a windows XP cd and installed on W98 on my Satellite Pro 6000. The sleep function does not work now. I probably need a software of Toshiba. What do I need? Where can I find? What is the order of installation?

  Hello

  All drivers Windows XP Home edition, tools and utilities you can find on Toshiba support page under http://eu.computers.toshiba-europe.com > support & downloads. You have old laptop model and because of this type of product, you choose option ARCHIVE.

  Order of the facilities is as follows:
  -Windows XP
  -Display driver
  -Audio driver
  Toshiba - common modules
  -SD Card host driver
  -SD Card Driver
  -BlueTooth Stack
  BlueTooth - Easy Connect
  -Mouse driver
  -Modem driver
  -LAN driver included with Windows XP
  -Infrared driver
  -Toshiba Power Saver
  Utilities - Toshiba
  Toshiba - post Mobile
  -Toshiba Console worm.
  -Toshiba Hotkey for display devices

  I hope that you will be able to install Windows XP Home edition successfully.

  Good luck!

• Satellite Pro 6000 won't start or do something

  Hello

  My satellite pro 6000 stopped working all of a sudden.
  Power led, battery, keyboard LED is on, but nothing happens, tried to remove the battery, cd, hd and put them back, nothing seems bad.
  Also tried the back button back in case but no tip was not all good.
  It just won't start at all.

  Any ideas out there?

  Thank you

  [Edited by: moderation of the Forum]

  Do the job of seem´to LEDs ok, or they do a code flashing for you say that it is something wrong?

• Damaged BIOS 1 - Satellite Pro 6000 block

  Hi all

  I bought a laptop, a Satellite Pro 6000, but after a few weeks, he refused to start and gave me the bios message 1 damaged block.

  I downloaded the update to bios on the toshiba site, but it does not work.
  I have an external floppydisc. When I put the .exe to upgrade the bios on a floppy disk and turn on the laptop with the ~ button, I get the message "ready for the update of the bios, place the update disk and press any key when ready."
  I can hear the disk is searched, but nothing happened.

  How do I update the bios or is there something else wrong?
  Any help would be appreciated!

  In my opinion with the BIOS update you can't do anything wrong.
  If you BIOS, update by following the procedure described in the document FAQ Toshiba and the BIOS update can not be done properly, I'm afraid there is a problem with the BIOS chip and it may be defective.

  I can't say for sure, but if the BIOS chip is damaged, then you have a big problem.

• Satellite Pro 6000: display or graphics card problem

  Hello
  I don't have a model satellite pro 6000. PS600E-01NYE-FR
  1 GHz P3, 20 GB HDD, wireless bluetooth not running XP

  I understand that it is an old laptop but had been treated with great care because I got it.
  My problem is the following;

  Startup of the laptop is a route very well, but for some reason together and after no set amount of time the display fails
  a wot is visible on-screen is hundreds of tiny colored blocks, sometimes random horizontal lines
  but nothing is readable, at all.

  I tried to run a yellow one also using the video output external monitor, all appear the same.
  a computer display (although I can't check it out) to freeze.

  I replaced the heatsink fan as a precaution (using the new dough)
  the only solution I can find is replaced the ram with
  2 x 256 MB Sync 133 mHz module Samsung. This could be the problem or can anyone shed some light on this for me.

  Thanks in advance
  Display Toshiba SP6000 (?) Problem

  I am not a technician, but I assume that there is probably a problem with the video card. I'm afraid there is not much to do. You should contact the service and make them run tests to verify the functionality of the video card. If the card is faulty, just replacement will help.

• View fragile on Satellite Pro 6000

  Hi, I recently had to format my laptop: Toshiba Satellite Pro 6000 and model the screen is fragile.

  Please how can I get the right driver, I checked the net but without success.
  Thank you

  All the drivers, you can find on Toshiba download page http://eu.computers.toshiba-europe.com > support & downloads but under product type, you must choose option ARCHIVE.
  All that s!

• The maximum size of HDD for Satellite Pro 6000?

  Hi, I am trying to install a 60 GB hard drive, but it is shaped, and it stops at the instalation of Windows XP Pro.

  Is there a size limit of HD?

  Thank you
  Ronaldo

  Hello

  It stops without any error message? If this isn't the case, then try another copy of Windows XP since the Satellite Pro 6000 shouldn´t have problems with this drive. I had 2 years a similar machine and I also got a 60 GB Toshiba HARD drive installed. It worked like a charm, so I can't imagine that the hard drive could be the problem.

  See you soon

• Updated by Satellite Pro 6000 with a DVD burner - technical question

  Hi all, I just bought a DVD burner that is adapted to the Bay of selection to replace the old DVD player...
  He came 'naked', so I thought I'd just disassemble the frame of the old drive and put it on the new...

  But: not the slightest Phillips screwdriver will integrate these screws; in fact, they look very special and I do not know how to remove...
  Should I have any instrument/tool special and if so, where do I get it? Maybe I'm too blonde...

  Someone here who can help?

  Thanks in advance! lionesse62

  Hello

  You need a special screwdriver to remove the module bay select (CD/DVD drive).
  A 2 mm screwdriver Phillips, a pilot of flat blade screw 4mm and a LHSTIX of 4mm screwdriver.

  I think you should visit a laptop computer technician if you n t have the right tool to remove these screws.

  However, if you want to remove the module bay select the Satellite Pro 6000 laptop then follow this instruction;

  (1) turn the computer
  (2) when the lock screw is in the locked position, remove the screws and fix it on the hole to keep her temporarily locking screws.
  (3) slide the lever and pull place the selectable bay module.

  After you remove the DVD rom, you need to remove the connector and the connector cover. The connector cover is fixed with screws of black 2M2x8 liaison.
  The frame is blocked with five super flat head white M2x3 screw.

  As I said, if you can not remove these screws and then ask a technician for help.

  Good bye

• Satellite Pro 6000 RAM upgrade problems

  Apologies for multiple - originally, I put this in the Satellite rather than the Satellite Pro series Forum.

  I have an old Satellite Pro 6000 that has 256 MB of RAM in it, and accordingly, as he tries harder sound, it is not the fastest machines.

  I want to increase the RAM to 1 GB, which I believe is the maximum and 2 sticks of memory of 512 MB PC133 CL3 3.3V, which I think should work fine.

  However, I tried to install either as a pair or separately, with the 256 MB of RAM, and when I put the memory in, the PC resolutely refuses to start. The lights of power lights, but it is only it works.

  I put the original 256 MB of RAM in the slot, and it works fine.

  I'm something wrong or missing something?

  Any help appreciated gratefully.

  Hello

  > Am I something wrong or missing something?
  Of course, you use the memory bad or is not compatible!

  Initialization not after an upgrade of memory is a common behavior if the modules are not compatible or do not work.

  You can upgrade the memory to 1024 MB (2x512MB) max and page Toshiba should run these modules:
  PC133 512 MB (PA3108U - 1 M 51)
  PC133 256 MB (PA3086U - 1 M 25)
  PC133 128 MB (PA3085U - 1 M 12)

• Motherboard or processor upgrade Satellite Pro 6000

  Hello

  Is it possible to update or change the processor or mother satellite pro 6000 map?
  To have a processor or motherboard faster on this subject.

  Thank you to

  Greg (french guy with bad English)

  Hi Greg

  Good decision. RAM and HARD drive can be upgraded without any problems. Many people think that hardware on laptops can be improved, such as on the desktop, but the design is completely different.

  There are also a lot of other factors that make the upgrade is not possible or very risky. Heat as an example. This is a common problem with laptops. Manufacturers keep all this in mind and the optimal hardware platform design that offers the best compromise between performance and protection of the equipment.

• Satellite Pro 6000: Windows XP installation problem

  Win98SE works well on my Satellite Pro 6000. I put XP on it.
  During commissioning, I see the logo "windows XP pro. But after loading XP, I have no picture.

  Save mode then also does not work, I can't see anything.
  What I've done wrong? It seems that the video driver is missing?
  With the recovery cd is everything works again. (win98se)

  Someone at - it solution to put XP on this laptop?
  Gr. R.

  Hello

  In my opinion, there should be no problem with the use of Windows XP on this unit.
  As far as I know the laptop came with WinXp pro, W2k and Win98SE.
  In this case, all required drivers are available and must be installed in the correct order.
  I assume that the installation and the installation procedure has been authorized. Did you install it on a second partition? You format the HDD to NTFS?

• Satellite Pro 6000: video controller - driver compatible vga

  Hello

  I have a Satellite Pro 6000 but I can't watch DVD because they run very slowly.
  That's probably because my video controller is not installed, but I can't find a
  Driver video controller for a 6000 SP. My OS is XP.
  Can someone help me?
  Thank you

  Hello

  You need to install the Trident display driver. You can find it on the European driver Toshiba page in the Archive folder.
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  Choose Archive-> Archive Pro Satellite-> Satellite Pro 60xx-> Satellite Pro 6000-> Win XP

  By the way; You must use a special software like PowerDVD or WinDVD to play and watch DVD movies!