Satellite Pro A10 does not pass the Windows page after removing SP2

Similar Questions

• Satellite Pro A10 does not recognize the drive WEIRD AD - 7540A model

  Hi all.

  I just bought a new model slimline DVD rewritable AD - 7540A, brand Sony NEC Optiarc. When it is plugged into the computer laptop and for the POST, it appears the 'IDE #1 error' message after the operating system starts, I am unable to open the drawer and no CD/DVD can be read.

  I checked this drive on another laptop from another brand, and it works fine, so the problem is not in the drive itself. Could someone help me?

  Thanks in advance.

  The problem is simple.
  Your phone does support not all readers of CD/DVD slimline because different or bad master/slave/c-salt settings.

  The IDE #1 error message indicates that the BIOS cannot recognize the device connected to the #1 IDE controller.

  In your case, the solution is simple; you need to buy a compatible CD/DVD player and supported

  Mayen a user manual would provide details on the management of records.
  If not, then contact the ASP in your country and ask some compatible devices!

  At soon buddy

• Satellite Pro A120 does not pass the POST

  Hello

  I'm a character 'J' on the upper left side of the screen immediately after the post (power on self test)?
  It will not go any futher.

  I got into the bios and everything seems fine here, I can boot from a cd, but that's all.
  Hard drive turn but not start.

  Any ideas please?

  Hello

  If you are able to access the BIOS.
  The HARD drive is recognized in the BIOS? You see the details of the HARD drive?
  If so, then that would mean that the HARD drive is ok and BIOS can see it.

  I don't know why J appears on the screen
  Have you seen other error messages or notifications?

  You said that you can boot from the CD. Have you checked if you boot the Linux Live disk?

  This doesn t require installation on the HARD disk, theoretically you should be able to start the distribution of Linux.

• I got an iphone 4 to a friend in the Canada. I want to use it here in the Philippines as a regular iPad reserved for wifi, how can I use it without sim card? It does not pass the activation page. Help please?

  I got an iphone 4 to a friend in the Canada. I want to use it here in the Philippines as a regular iPad reserved for wifi, how can I use it without sim card? It does not pass the activation page. Help please?

  You can activate it without a SIM card. If it is locked, it takes a SIM card by the carrier, for it is locked. The SIM card should not be linked to an active line of service, but it must be present to activate it.

• Satellite Pro A10 does not start - no hard drive

  MY TOSHIBA SATELLITE PRO A10 PRIMER NOT.
  WHAT I GET IS NO DRIVE DETECTED. TRIED TO REINSTALL XP BUT STILL NO LUCK.
  CAN EVERYTHING-ONE PLEASE HELP AS I AM PULLING MY HAIR OUT TRYING TO THINHK HOW TO SOLVE THIS ANNOYING PROBLEM.
  DOES ANY - ONE KNOW WHERE I CAN DOWNLOAD A RECOVERY DISC SO I CAN TRY THIS OPTION.

  Hello

  HARD drive is visible in the BIOS?
  If this isn't the case, then this means that the HARD drive is faulty.
  Try to replace the HDD with a compatible and try again.

  Good luck

• Satellite Pro A10 does not start (HARD drive seems to be missing)

  Hello, I hope someone can give me some advice on this problem: I have a 2 years Satellite Pro A10. Recently, it starts not at all and I noticed that if I look at directories on the C: drive using the command prompt, it said "file not found". Cannot start Windows at all, not even in Safe Mode.
  Using the recovery disks is I help spread messages as no such fixed disc and 'Extraction impossible '.
  is - that say I have:
  1 a hard drive damaged
  2. defective connections on the HARD drive? -If Yes, how I fix that?

  the system didn't crash before it happened, she doesn't have to load up when I started it.
  Would appreciate any help.

  Thank you
  SCL

  Hello

  Well, it could be a hardware malfunction of HARD drive. Yes, it is possible. But I don t think that there is a bad connection. You used this HARD over the last two years and you n t change the settings of connections on this HARD drive. Is this good?
  If it possible s so I suggest you of to completely format the HARD drive.
  Then try to start the recovery procedure.

  However if the HARD drive has a functioning default (ie. crushing of the head), so the only way is to replace this device.

• Satellite Pro 6100 does not recognize the single battery external power

  Whenever I have start Satellite Pro 6100 Win XP Pro with standard battery mounted and connected to the power supply computer laptop does not recognize the ext battery supply single supply and during 'start-up' goes into hibernation.

  By pressing the power on button laptops "wake up" and indicate that the battery is empty or may not even decide when completely loaded, then says connect the station even if still connected, looking under Toshiba console when it runs shows running on battery when still in the power of the ext?

  I have two batteries and both give the above symptoms even when I remove ext of laptop power always runs with power supply by battery but no light orange or green for battery.
  Any ideas?
  Concerning
  Phil

  Hello

  Is your AC adapter malfunctions or there is something wrong with the power supply to electronic s laptop.
  In the first case you could purchase a new compatible AC adapter and could check if the laptop can run successfully.
  The second possibility is a serious hardware problem, but in this case, the laptop must be checked by an authorized technician.

• Satellite Pro A200 does not recognize the hard drive, XP Pro

  When I try and load XP Pro SP3 (32 bit) it will not install because it doesn't have SATA drivers. I downloaded the drivers and have an external floppy drive to install drivers by pressing F6. My question is the machine is listed as 64-bit and XP Pro is 32-bit. Choose the drivers ICH8M 32 or 64 bits. IE is the 32 or 64 bit on ICH8M see hardware or operating system. Computer's Satellite Pro A200 PSAE4E-01700WEN.

  Any help appreciated

  Dave

  Hello

  If you are using the 64 bit OS, then also use 64-bit drivers.
  I found very nice HowTo from Toshiba.

  Check it! It s certainly interesting and should be useful.

  * + How to integrate a SATA AHCI driver into a Windows XP Setup CD + *.
  http://APS2.toshiba-tro.de/KB0/TSB85017Z0000R01.htm

• Touchpad on Satellite Pro P300 does not work with Windows 7

  Hello

  Recently, I load Windows 7 (64-bit) on my Satellite Pro P300. I downloaded all the drivers for W7 64 bit and installed everything, fortunately, most of the time.

  The touchpad, however, is not completely functional. The upgrade page says to use the Vista drivers and did not provide any drivers for win7. Installing the Vista drivers didn't really go so well.

  In any case, the essential element of the missing features is this thing where you drag your finger up and down the right edge of the touchpad, and it scrolls for you. I can click and double click and move the slider. But I can't scroll. And it's such a pain with move the slider above the scroll bar of the application, with a big screen.

  Any help would be appreciated.

  See you soon
  '

  If I understand you right you are missing these additional mouse settings. Am I right about that?
  Which driver you have installed?
  Perhaps Synaptics driver?

• Satellite Pro A60 does not recognize the accept/DVDs blank

  My computer will not accept blank CD - R disc so I can burn data on them, but my computer will not accept blank DVD discs that I want to be able to use to store more data.

  In the drive of my computer D reads "DVD - RW", I guess so, but am not sure that this means that my pc should be usable with DVD-R and DVD - RW discs but it do not accepts / acknowledges these when I put a try to burn something on them.

  My computer also does not accept / recognize DVD + R Virgin discs as I have tried those, just in case they might work.

  Help please!

  Post edited by: EDS

  Hello

  Have you also tried to burn DVD-R discs?
  I had also some problems with DVD + R discs, so I changed to a DVD-R and since all works well! :)

  I don't use Windows Media Player to burn discs, I use CD Burner XP. It is a freeware tool, very small and fast. It works on most versions of Windows, and you should try it too!

  Also check the Toshiba page for an update of the firmware!

• Re: Satellite A135-S7403 does not pass the POST after BIOS update

  Hello

  I A135-S7403, I know it's old, but well, I worked until I installed a new version of Bios (1.90 for Satellite A130 (PSAD0U/PSAD3U) on the official website of Toshiba (here: http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/modelContent.jsp?ct=DL&os=&category=&moid=1854878& rpn = PSAD0U & modelFilter = & SelCategorie = 3 & selFamily = 10 73768663).)

  All installed no problem, but when I restart the laptop, it does not start.
  It freezes on screen with red writing "in touch with tomorrow TOSHIBA" and I can't do anything.
  What should I do? And why this official update broke down my computer?

  Hello

  Something has gone wrong with your update of the bios, this is why the Tower cannot start. Also, can you enter the Bios itself?

• Satellite C855-1GN does not start the Windows system

  My Satellite C855-1GN will not load Windows.

  After pressing start it say starting windows the four colors appear in the center of the screen and seem to vibrate slowly but will not following charge.

  I ve restarted and run the fix for the system, but it cannot solve the problem, run the system restore but luck is.

  Can anyone help?
  I put t really want to reload the discs so it s not necessary that the girl has loads of work United to this topic.

  She may lose.

  see you soon
  Phil

  Hello

  You are able to access the advanced boot menu by pressing F8 while turning on the unit?

  If you are able to do so, you should try to start the computer using one of the advanced options available in the start menu.

  You can try to start the laptop computer using the last known good configuration or you can try to repair the system by automatically selecting the repair my computer option, you can try to start the machine in safe mode to access important data on the HARD drive.

  Finally (after data backup) I would recommend to recover the laptop using the Toshiba recovery media

• Windows does not pass the Windows logo screen at startup

  Original title: computer Dell does not start

  Now, he gets to the Windows logo screen and will not get any further. I tried to repair windows startup and restore among other things. Previously, he was to reach the blue screen and would occasionally work by me it turn off and try again.

  Restart your computer and hit F8 repeatedly (once a second should be enough) until you see the menu Advanced Startup Options. Select repair your computer (if this option does not appear you have to start from the Windows recovery disc or the installation disc).
  Then select System Recovery Options and run the Startup Repair tool.
  http://bit.LY/9rV2SB

• Satellite Pro M70 does not read the DVD of some manufacturers

  Recently, my Satellite Pro M70 stopped reading some DVDs, specifically verbatim...
  When I put in, it is just to see any disk. If I put the same disk into any other computer, even my friends Toshiba Satellite Pro M70 - than mine, even it reads normally.

  Any ideas?

  WEIRD laser could be at fault, or it is maybe dirty. Try to clean the lens with a Microfiber cloth.

• Satellite Pro c660 does not connect to another wireless after format

  Hey all,.

  I have a Satellite Pro c660 and bought a copy of windows 64 bit with him - the laptop come with many software from toshiba on what I wanted really, I therefore installed windows 64 bit (fitness in the process).

  After the Installation I had some problems connecting to my wireless home (he was missing drivers, but have now install) but finally got it works.

  After having taken it round my friends last night, I could not connect to its wireless - the password has been good and I could see the network, but he just kept constantly defect - its network was on it, because his cell phone he was performing. -The only difference between its network and the spirit (that I can see), it's that she was using the TKIP encryption to connect, while I was using AES (my network card is Atheros). -Even when I tried to configure a network profile and have it automatically connect (using the same information she used, including the TKIP encryption) - it was always not.

  The ideas people? More missing drivers?

  PS - I really don't want all that toshiba nanny software on the laptop.

  Thanks in advance!

  > Any ideas people? More missing drivers?

  If you can see the Wlan network then it means that the WiFi adapter driver is correctly installed and the problem is between the router configuration problems WiFi and wireless network card.

  Are you abele to connect to other networks wireless at home?

  Please disable encryption settings in the Wlan router and try to connect to the Wlan that is unprotected.
  But note; This must be done only for testing purposes!

  You should also check if the MAC address filtering is disabled in the settings of the router.