Windows does not pass the Windows logo screen at startup

Similar Questions

• PC HP Pavilion 13 x 360: Hp laptop does not pass the hp logo

  After a update Windows 10 laptop after weeks of return costs. The laptop installed some updates and then when the laptop has been reset and couldn't go spend the sign of hp. I can help someone!

  Hello

  Try the following.

  First, use another PC to create a bootable Windows 10 DVD or a USB Flash drive via the following link.  Under the section "Imperative to create a cable USB, DVD or ISO", download the media creation tool.

  http://www.Microsoft.com/en-us/software-download/Windows10

  Once you have it, run the tool, select 'Create the installation media for another PC', then select the language edition of Windows 10 and 64-bit.

  Follow the rest of the guests to create this and then click on finish when done.

  Insert the Installation of Windows 10 support and stop the laptop by pressing the power button for 10 seconds.

  Click next to the ESC key as soon as you press the power button to enter the Boot Menu, and then select the Boot Options Menu ( f9 ).

  Use the arrow keys to highlight the CDROM (uefi) or USB Flash Driver (uefi) option, according to the type of media you created, then press on enter – if you are prompted to "Press any key to continue...". "- make.

  Start on the Menu of Boot Options Advanced - see Option 5 on the link below for more information on access to this.

  http://www.tenforums.com/tutorials/2294-advanced-startup-options-boot-Windows-10-a.html#Option5

  Then try to run the Windows system restore to return the laptop to a point in time before this problem occurred - see Option 1 on the link below for more information on this procedure.

  http://www.tenforums.com/tutorials/4588-system-restore-Windows-10-a.html

  Kind regards

  DP - K

• MS-DOS 16-bit subsystem. The system does not support the mode full-screen.

  I when even run some dos applications, which allows to work ok under XP mode full-screen, but when you use Vista or Windows 7. I can only rum these applications in a window.
  The error message is

  MS-DOS 16-bit subsystem. The system does not support the mode full-screen.

  Please is anyway I could run in fullscreen... I don't want to use a virtual machine.

  Any advice would be greatly appreciated

  Of Ernest24

  http://www.dosbox.com/

  You might be interested in reading about DosBox.

  See you soon. Mick Murphy - Microsoft partner

• The system does not support the mode full screen for cmd

  Respected Sir/Madam

  I am user of Windows vista HOme basic... .also I have Windows 7 user... I'm basicllly, a student in computer engineering...

  I get an error "The system does not support the mode full screen" for cmd.exe in C++ turboo or JDK.. .then I getproblem by entering n compiled the program...

  my PC configuration is

  :-AMD 6000 + dual core Athlon 64 X processor

  Monitor:-Viewsoni

  RAM :-1Go

  Please give me a solution to problem 4 I wanted to run cmd mode full screen...

  your help will be appreciated by me highlly...

  thanking you

  Philippe

  Vista + do not support a command prompt full screen, as indicated by the message. You can manipulate the available to the command window to specify the width and height to be as big as you want, but this isn't quite the same thing...

• I got an iphone 4 to a friend in the Canada. I want to use it here in the Philippines as a regular iPad reserved for wifi, how can I use it without sim card? It does not pass the activation page. Help please?

  I got an iphone 4 to a friend in the Canada. I want to use it here in the Philippines as a regular iPad reserved for wifi, how can I use it without sim card? It does not pass the activation page. Help please?

  You can activate it without a SIM card. If it is locked, it takes a SIM card by the carrier, for it is locked. The SIM card should not be linked to an active line of service, but it must be present to activate it.

• Dose of picture does not fill the whole computer screen

  I tried to solve this problem for a while now. I have a Windows Vista and everything I seem to display on the monitor, does not fill the entire screen more. There are these twoblack bars going down on each side, vertically. The entire vacancies, computer screen usage now all appears right in theMiddle of the screen, between the bars. Y at - it a program that I need to go in? Or certain keys do I press on? It's really annoying. That's the best I can describe this problem, see how I searched help and nothing seems to describe what I'm trying to hard. Please help me.

  Sincerely, Brittany

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-screen-resolution
  Otherwise, press the keys in the stretch and adjust screen monitor.

• Portege R100 video cable does not reach the replacement LCD screen

  Hi guys, I have replaced the LCD screen of my Toshiba R100, than they had in it was defective. It seemed that it was a replacement at some point however. In any case, I received my new screen, but does not reach the video cable to the top of the circuit of LCD screens. How am I meant to connect it to the screen? Is there an extension cable or what? The screen they had in there previously looked like they were welded copper wires about 8 digitizer.

  Here are 2 pictures of what I mean

  

  

  Hello

  Where did you buy this screen?
  Are you sure that it is perfectly compatible with your laptop protected R100 to 100%?

  Looks like it s not fully compatible
  However, if an extra cable is necessary you can get it from the Toshiba ASP in your country.

  In your case, I recommend you contact the guy and ask for compatible cable!

  Welcome them

• Photoshop is now white and does not have the normal start screen

  A few days ago, I was working on Photoshop CC as usual and it closed after completing an action list to automatically apply a custom filter. Later that day, only a few hours later, I opened it upward, a dialog box pops up saying something about a file is missing and that certain aspects will not work without said folder. Then he opened with a white Photoshop look completely different with no presets full boot screens and such. Any ideas what's past? I uninstalled and reinstalled but it does not solve the problem.

  Please change the color preferences theme according to your need.

  Open Photoshop > laModifiermenu > preferences.

  

  Kind regards

  Mohit

• Windows 8 Upgrade Wizard does not pass the payment

  Hi, I am looking to buy windows 8 the wizard upgrade and it won't pass the part payment, for example if I want to pay with a credit card, I fill in everything and when I click Next nothing happens, same thing if I try to use paypal, I have done everything to disable my antivirus to run it as an administrator , and nothing seems to work. Help, please!

  Hello

  Thanks for posting your question in the Microsoft Community Forums. If I understand you correctly, you have a problem with the upgrade to Windows 8. The upgrade of Windows 8 Wizard won't pay the Bill. Please let me know if this is not correct.

  
  I suggest you to contact technical support for Microsoft Store for assistance on this issue.
  http://www.microsoftstore.com/store/msstore/HTML/pbPage.Help_Site_Contact_Us
   
  You can see the article about the issue of Paypal.
   
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_install/i-tried-to-buy-Windows-8-through-PayPal-but-never/643bade0-82a2-4F60-B25E-7619c0594df4
   
  
  Hope this information helps you.

• When I download something at this time, it displays the logo of microsoft word, but does not show the picture logo .so I can do now

  When I download an image with Firefox than time, it shows only the Microsoft word logo but do not show the logo of the photo, so when I open the download file it show only the Microsoft word file. and I don't see my folder. but now what can I do?...

  What file extension, these files get when save you them?

  If they do not have a file extension valid for a picture as a .jpg or .png then try to rename the files and give them an extension of .jpg file to see if that helps.
  
  If Windows hides the file extension and then use quotes ("image.jpg") around the name.
  
  You can check the type of file using the context menu > properties.

• Re: Satellite A135-S7403 does not pass the POST after BIOS update

  Hello

  I A135-S7403, I know it's old, but well, I worked until I installed a new version of Bios (1.90 for Satellite A130 (PSAD0U/PSAD3U) on the official website of Toshiba (here: http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/modelContent.jsp?ct=DL&os=&category=&moid=1854878& rpn = PSAD0U & modelFilter = & SelCategorie = 3 & selFamily = 10 73768663).)

  All installed no problem, but when I restart the laptop, it does not start.
  It freezes on screen with red writing "in touch with tomorrow TOSHIBA" and I can't do anything.
  What should I do? And why this official update broke down my computer?

  Hello

  Something has gone wrong with your update of the bios, this is why the Tower cannot start. Also, can you enter the Bios itself?

• Acer aspire 10th switch does not start the Bios Setup screen

  I'm trying to start on the bios Setup screen to change the boot sequence to test a rescue disk/windows 10 install usb, but all by pressing f2 during POST it just boots to windows of ideas anyone? Thank you

  power the device turned off, press and hold the power + Volume UP

  After awhile, it will boot to the BIOS.

• Sansa Clip does not pass the stage of audio books

  Dear all,

  We have the problem that our Sansa Clip will not skip chapters of audiobooks. If you hold the buttons, fast towards the front/rewinds, but if you just click on it once, nothing happens. It is only in the audio books and Podcasts, but not in music.

  However, we have already owned a Sansa Clip 8 GB, which worked very well. Then we bought a second one (also 8GB) with the problem described. The strange thing: the same audio books work very well on the other Sansa Clip (same firmware version). Also strange: jump works with music files, so it may not be a hardware failure. However, we discovered this last don't bit recently, we already have it back and got another Sansa Clip 8 GB (third). Yet once again, jump does not work. I am suspecting that something with the files is wrong, but I'm intrigued by the fact that they work very well on our first Clip. They all have the same age, our first clip is just a couple of weeks and they all came from the same supplier (Amazon), so I guess it's the same batch.

  The clues someone?

  Thank you very much
  André

  I think that you have access to the setting if you press the button in the 6 oclock position while playing an audio book. I think that there is a choice of menu for the settings of the audio book or chapter. I don't have the video right in front of me now, so I'm not sure about this.

• Satellite Pro A10 does not pass the Windows page after removing SP2

  Hello

  I have a toshiba laptop Satellite Pro A10.
  I installed windows service pack 2 week last to try to get one of these dongles TNT to work, he never so I uninstalled service pack 2 I was going to try and reinstall it to see if it would work.

  Now, my problem is that the laptop will not go at all, it gets to the windows XP page and then everything stops, someone could help me I don't know what to do!

  Thank you
  Sharon

  Hi Sharon

  Seems that the system files are corrupted on the HARD drive.
  All of the installation and the removal of the service pack has damaged some files or registry entries.

  I don t think you will be able to resolve this situation without reinstalling the OS.
  In my opinion, it's a better way to get rid of this problem.

  Take the Toshiba Recovery CD and reinstall everything.
  If you want to back up your data, I recommend to connect the internal HARD drive to another computer via the external USB HDD controller.

  Good luck

• window does not pass the validation Build 6002

  I have what is clearly a common problem.  My 4 year old computer with Windows Vista Home Premium Dell started man me messages that the installed version of Windows is not valid.  Here's what I did to try to find the cause.  Please tell me how to solve this problem.
  :

  Run malwarebytes - corrected some errors
  Run a scan complete by using Microsoft Security Essentials - no problem
  Don't run chkdsk - no error
  Run the report of MS diagnosis.  Here it is:

  Diagnostic report (1.9.0027.0):

  -----------------------------------------

  Validation of Windows data-->

  Validation status: invalid license

  Validation code: 50

  Code of Validation caching online: 0x0

  Windows product key: *-* - F4GJK - KG77H-B9HD2

  The Windows Product Key hash: iJAth4TbScMi8HdcPurlASXdEkw =

  Windows product ID: 89578-OEM-7332157-00204

  Windows product ID type: 2

  Windows license Type: OEM SLP

  The Windows OS version: 6.0.6002.2.00010300.2.0.003

  ID: {9ECDD2CD-779C-4C2C-BBAB-B10164E88A59} (1)

  Admin: Yes

  TestCab: 0x0

  LegitcheckControl ActiveX: Registered, 1.9.42.0

  Signed by: Microsoft

  Product name: Windows Vista (TM) Home Premium

  Architecture: 0x00000000

  Build lab: 6002.vistasp2_gdr.130104 - 1437

  TTS error:

  Validation of diagnosis:

  Resolution state: n/a

  Given Vista WgaER-->

  ThreatID (s): n/a, hr = 0 x 80070002

  Version: 6.0.6002.16398

  Windows XP Notifications data-->

  Cached result: n/a, hr = 0 x 80070002

  File: No.

  Version: N/a, hr = 0 x 80070002

  WgaTray.exe signed by: n/a, hr = 0 x 80070002

  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->

  Caching the result: 100

  Version: 2.0.48.0

  OGAExec.exe signed by: Microsoft

  OGAAddin.dll signed by: Microsoft

  OGA data-->

  Office status: 100 authentic

  Microsoft Office Home and Student 2007-100 authentic

  OGA Version: Registered, 2.0.48.0

  Signed by: Microsoft

  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->

  Proxy settings: N/A

  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)

  Default browser: C:\Program Files\Mozilla Firefox\firefox.exe

  Download signed ActiveX controls: fast

  Download unsigned ActiveX controls: disabled

  Run ActiveX controls and plug-ins: allowed

  Initialize and script ActiveX controls not marked as safe: disabled

  Allow the Internet Explorer Webbrowser control scripts: disabled

  Active scripting: allowed

  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->

  Office details: {9ECDD2CD-779C-4C2C-BBAB-B10164E88A59}1.9.0027.06.0.6002.2.00010300.2.0.003x 32*-*-*-*-B9HD289578-OEM-7332157-002042S-1-5-21-1005771013-1596688161-2321268846Dell Inc.. Inspiron 530 Dell Inc.. 1.0.13 20080320000000.000000 + 000EF323507018400FA0c 090409E. Australia Standard Time(GMT+10:00)03DELL FX09 100100Microsoft Office home and Student 2007129EBBB4792A25B2cement/rpnqAMoiVfYyBHcT87xDgps =81602-OEM-6872912-495884

  Content Spsys.log: 0 x 80070002

  License data-->

  The software licensing service version: 6.0.6002.18005

  Name: Windows Vista, HomePremium edition

  Description: operating system Windows - Vista, channel OEM_SLP

  Activation ID: bffdc375-bbd5-499d-8ef1-4f37b61c895f

  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f

  Extended PID: 89578-00146-321-500204-02-3081-6001.0000-1932008

  Installation ID: 004891880816973935038686296695384360376804663620300292

  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=43473

  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=43474

  Use license URL: http://go.microsoft.com/fwlink/?LinkID=43476

  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=43475

  Partial product key: B9HD2

  License status: Notification

  Reason for the notification: 0xC004F02A.

  Windows Activation Technologies-->

  N/A

  --> HWID data

  Current Hash HWID: NgAAAAEABAABAAEAAQACAAAAAgABAAEA6GGKtrDb8nu2WWT + iP0sytA18vQa7KjlSOesVswx

  Activation 1.0 data OEM-->

  N/A

  Activation 2.0 data OEM-->

  BIOS valid for OA 2.0: Yes

  Windows marker version: 0 x 20000

  OEMID and OEMTableID consistent: Yes

  BIOS information:

  ACPI Table name OEMID value OEMTableID value

  APIC                                    DELL                       FX09

  FACP                                   DELL                       FX09

  HPET                                    DELL                       FX09

  MCFG                                 DELL                       FX09

  SLIC                                      DELL                       FX09

  DMY2                                  DELL                       FX09

  SSDT PmRef CpuPm

  That sounds good - you chose the right set of instructions to follow ;)

  Good luck.