Satellite Pro A60 with departure problems and weird sounds

Similar Questions

• Satellite Pro A60 Wireless connection problem

  Hello

  I have a Satellite Pro A60 which was connected to our main office using a Linksys Home Wireless - G USB adapt to I can share files and also connect to our connection broadband. The main office is connected directly to a G from Linksys home wireless gateway. It worked fine then for no reason (no settings have been changed or installed software) the laptop does not connect to the desktop or the internet. The software Linksys says that it is connected to the access point, but the internet cannot be found. Even if he says that it is connected I can't get to the desktop.

  I tried to set up a dial-up connection independent for updating drivers etc, but after the normal dial tones, he says that it cannot connect to the remote computer.

  We tried everything that we think would be grateful for any ideas. Please speak slowly and distinctly also even if I know a little technical jargon computers is a language that I'm not still commonly!

  Thank you very much

  Hello

  It's really not easy to say what can be the problem. In my opinion, you must remove all the settings and adapter WLAN Device Manager. Restart the unit, reinstall the wireless card and make a WLAN configuration again.

  In my opinion, it is very important to know if the WIFI network of the device works correctly, and if you are able to share files between the laptop and our main office. If it works properly again check the settings on our front door.

  One is the problem with Notepad or another device. If someone of your friends has a WIFI at home, you can try to check the laptop WIFI functionality. On this way, you can be sure that if the problem is caused by your Satellite Pro.

  If you find a solution please let me know what the problem is.

  Good luck!

• Satellite Pro A60 video Capture problems

  I have the following system:

  Toshiba A60 laptop Pro satellite
  CPU - AMD 2.8 Ghz
  RAM - 768 MB
  OS - XP Pro SP2

  All other system requirements as indicated by the Dazzle DVC90 USB 2.0 capture card are met.

  I use Pinnacle Studio 9.4 update to capture VCR.

  Problem:

  When I plug the DVC90 to my laptop, I get nothing on the preview window. I have it set to capture as quality DVD Mpeg. But I don't see a gray screen when I look at the overview. I click start capture, the timer starts but no capture is made, either by audio or video.

  I checked all the settings. They all seem to be fine. My friend tried the capture card USB with exactly the same settings and connection on his desktop PC and it worked perfectly. The specification of his PC is similar to my laptop. Is it a familiar fault with video capture on laptops?

  I'd appreciate it if someone could help me with these problems.

  Thank you very much

  Alex

  Hi Alex,

  Have you checked in your Pinnacle capture settings that is not failing to the incorrect entry (rather than Composite, S-video). Obviously the value specified must match your connectivity of material allowing to receive a video signal.

  I think that it is also possible to disable the capture preview screen to minimize the risk of frame drops. Please check that you have the active video preview.

  HTH

• Satellite Pro A120 with XP SP3 has lost sound.

  Have had problems since the new camera Panasonic 4 weeks ago loading software. Now for the most part resolved except can't get her back. Tried system restore and have realtek high definition latest driver. Everything works ok, says the Device Manager. Any suggestions please?

  > tried system restore and have realtek high definition latest driver. Everything works ok, says the Device Manager. Any suggestions please?

  Have you installed again the Panasonic camera software after system restore? There may be software conflicts... have you tried plugging the headphones to see sound?

• satellite pro a60 problem with game called "call of duty".

  I have a satellite pro a60 with skvideo ati radeon 7000 igp. I have the problem with the game "call of duty" because it is too slow. With my old laptop with ati igp 340 skvideo is not this problem.
  ATI have solved this problem with the new driver, but for this toshiba is not new driver, why?

  Anyone know where I can find 'new post' I did not know where to click to make a new post!

• Satellite Pro A60 USB TV tuner

  Does anyone know of a USB TV Tuner (PAL) who will work with a laptop Toshiba Satellite Pro A60 with integrated ATI graphics card?
  I tried 2 so far, Pinnacle PCTV and Compro Videomate Action, neither worked.
  The problem seems to be with the graphics processor ATI IGP

  Hello

  have you checked www.hauppauge.com?

  They're also good tuners TV, but please ask a Tech support guy. If there are problems with the ATI 7000 IGP chipset!

  Good bye

• Satellite Pro A60: Blue screen - ATI2DVAG display driver. DLL in endless loop

  Hello
  Laptop is a Toshiba Satellite Pro A60 with ATI Mobility Radeon 7000 IGP video card, running Windows XP Professional and SP 2.
  During the start in most cases systems hang up with blue screen.

  I installed the latest drivers from http://uk.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=UK (Version dated 6.14.10.6430 Date 09/03/2004) but the problem continues. After second - last third - it reboot now works.
  The blue screen says (translated from German):
  "Component that probably caused the problem: ati2dvag.dll; the device driver is in an infinite loop; Subsequently the unit does not work, or the device driver is not program the equipment in the right way. STOP 0X000000EA. A dump was created.

  Please HELP - THANKS in advance!
  Best regards
  Frank

  Hello

  I studied a bit on the Toshiba site and found this interesting paper Toshiba on the error message Satellite A60 and blue screen on startup.
  http://support.toshiba-tro.de/KB0/TSB5300X7000MR01.htm

  This document describes how to upgrade the BIOS. The update of the BIOS should help solve this problem. Take a peek inside.
  Please post if you have solved the problem

• Satellite Pro A60: On startup graphics card problem

  Just got a Satellite Pro A60.
  Whenever it starts it stops and then restarts. It then works perfectly OK, even if restart you. But then if you start it once it is shut down for a few hours it crashes at startup upward again?
  Windows error report accusing the graphics driver ATI Radeon 7000 (see report below), but I've updated the graphics driver and still get the same problem.
  CAN ANYONE HELP?

  This is the error report:
  Error caused by ATI Graphics Driver: no specific solution found
  Description of the problem
  An unknown error has occurred in ATI Graphics Driver, created by ATI® Technologies, Inc.
  Resolution of problems
  ATI® Technologies, Inc. is currently not aware of a specific solution for the problem you reported. Here is a list of recommendations to take that may help prevent the problem does not happen.
  Download and install an ATI Graphics Driver Update from one of the following locations:
  o Windows Update
  o ATI® Technologies, Inc..
  If an updated driver is not available, check with your computer manufacturer.
  If you are running the latest version of the ATI graphic driver, please contact ATI Technologies, Inc.® for your support options.

  More information
  If this problem persists with the latest updates to ATI Graphics Driver, we strongly recommend that you obtain assistance and troubleshooting directly from ATI® Technologies, Inc. information.
  If you are not familiar with ATI Graphics Driver and you are questioning how the program was installed on your computer, it is possible that the program was installed with another program. If you don't know why ATI Graphics Driver is running, many programs configure themselves automatically starts whenever you turn on your computer.

  Hi Barry,.

  I'd be inclined to return your laptop to an authorized Service Agent Toshiba. The OEM software should not require all the updated drivers at this early stage of his life, and the unit will be well within its warranty period.

  The closer your repairman details can be found on the Toshiba site.

  HTH

• ATI error and no windows - Satellite Pro A60

  Hello

  When I start my computer, I get a blue error screen c0000415
  A quick google reveals that this is one of these: http://support.microsoft.com/kb/832324

  "So what are you bothering? I hear you cry - the problem I have is, in getting this error of the other (also the ATI card based) I stuck my red disc in and erased everything - including the windows... and CFLA error occurs before windows installs and SafeMode (-that worked perfectly before) does not work because windows is not installed!

  Oh the fun.

  "I think it's a hardware error" - Yes so don't I... However, before the reinstall and get it back, I could work to the computer in safe mode and videos played very well with the resolution and full color. Am I missing the point if I think a video work is an indicator of a working video card?

  I admit that I'm perplexed indeed. I'll try to dig up an old Windows 98 drive, but I don't know how much this will help, because the only copy of XP I have is on the recovery disk... [Return to step 1]

  Any suggestions much appreciated - thanks in advance...

  [it's a satellite pro A60 w / 256 +?] RAM, processor celeron 2.8 Ghz, ATI Mobility Radeon 7000 etc...]

  Hello

  As suggested in document of Microsoft this problem can occur if an ATI Radeon 7200 graphics card has been installed on your computer and the driver that is supplied with this adapter may not work correctly with Windows XP.
  The installation of SP2 should help.

  This statement of Ms. says it all! It of not a hardware problem but it is a compatibility issue with Windows XP (without SP2) and the driver radeon ATI 7200.

  You should try to get an original CD of Windows XP with or without SP2.
  The software callednLiteallows you to create a Windows clean boot CD and add the patches MS and service packs for this CD.

  Then, you can try to boot this CD and after installing the OS, you need to update or change the graphics driver!

• Satellite Pro A60-832: sometimes the OS starts without sound and modem

  Hello

  I have a problem with my Satellite Pro A60-832. Everything works perfectly, but sometimes my system starts without sound. When this happends, modem also does not work. After reboot, everything works well again. I integrate Windows XP Pro SP2, but the same thing was happening with the original Windows XP Pro SP1 provided in the Toshiba Recovery CD.
  Any ideas?

  Sorry for my bad English.

  As mentioned, a high temperature might be responsible for these drop-outs, but I n t think that there is a problem in your case.
  I think that the temperature cannot be very high immediately after the start of the laptop.

  In case I would recommend comparing the BIOS installed on the unit you with available on the Toshiba page BIOS.
  If there is a new version of the BIOS so you can try to update.
  But be sure you use the good BIOS and the proper procedure.

• During BIOS update by Satellite Pro A60 went down and did not start

  Hi all

  I have a Satellite Pro A60 and I've updated the bios. To halfway the update, my laptop came down and started Hasna´t since. It only give a couple of beeps (trying to tell me the bios is damaged, I guess) and turns off again.

  Tried to start with (~) key pressed (a tip I received from a friend), but without success.

  I live in a country where there is no available Toshiba dealer and I rather not ship the laptop for repair.

  Does anyone know how to fix this? Any help would be greatly appreciated.

  Thank you

  This doesn't sound good.
  If during the POST, the BIOS detects a problem, it will normally display an error message visual on the monitor explaining what the problem is. However, if a problem is detected before it initializes BIOS video card or a video card is not present or not detected then BIOS will play through the Speaker beeps to let you know there is a problem.
  Depending on the type of BIOS you have the BIOS can play beeps in a specific pattern to indicate what the problem is, or emits the signal even a few times indicating the problem.

  In your case, it is possible to s you used a bad BIOS or bad BIOS procedure. Both can damage the motherboard.
  To avoid such damage and mistakes, Toshiba published FAQ document.
  How to upgrade the BIOS on most of the units!

  That you should read before making updates to the BIOS!
  Unfortunately, I n t think that you can fix yourself. I think you should ask to help ASP.

• [Satellite Pro A200] - slow when problems of transfer and the warmth of the data.

  Hi people.

  I have a 1.5 years old Toshiba Satellite Pro A200 with 200 GB HARD drive standard. For some time, his behavior is just... weird.

  Sometimes the system slows down. She behaves just slow, it freezes frequently for a second when simple tasks such as entering the text. It; s busiest during intensive data transfers (e.g. copy files via FTP from my copy of the USB or LAN), but sometimes it happens even when no application other than Firefox does. It is not apparent, so I wonder - service it will take in terms of warranty (which means - is there a probability that you will say that everything is perfect and charge me for it?)
  The computer was once on the repair under warranty, they replaced the HARD drive with another. Is it possible that the other has problems as well (check S.M.A.R.T. discovers nothing). Or is it maybe faulty SATA controller?

  Another thing is the temperature. During the normal work (Internet, MS Word) two hearts runs at 60 * C. When the set temperature may exceed 90 * C and the computer sometimes shuts down. I guess the problem is dust accumulated inside the laptop but I do not see how can I clean.

  Go to the service of this kind of problems?

  Virus scanners can slow a system down considerably, what antivirus do you use?

  If you have a lot of programs installed, perhaps its time to back up your data and reinstall Windows. I do it myself every year since Windows tends to become bloated and slow after a while.

  With respect to the dust, you can Sauté using a can of compressed Air sprayed through the main entrance of air (when the system is off).
  Or if dust is really bad, you will need to send it to a Service provider authorized to do so and cleaned disassembled.

• Satellite Pro A60-138 PSA65E - cannot boot from c WEIRD

  Hello
  I bought this laptop on ebay, with no cd or manual.

  Satellite Pro A60 GR
  MODEL PSA65E-01K032GR NUMBER

  Hard drive is formatted.
  I tried to install xp, because I start the laptop it just says: "control system.
  Then press [F1]. "If I press F1, it tries to read the cd and gives up after a few seconds.

  If there is no cd in the cd drive there simply nothing.
  I tried to start the bios menu but everything works,(F12,F8,del) key.

  Is there something I can do?
  installing drivers or anything like that?

  Hello

  In order to access the BIOS please press F2, then ESC.
  This should load the BIOS and you can change the boot order there.

  In addition, you can press F12 at the beginning.
  This will allow the menu on the screen where you can choose the STRANGE as a source of start-up.

  But are you able to boot from another CD?
  The CD/DVD drive is unable to read the disc, and therefore the boot process fails

  You could also burn this disc Win XP on another CD and could use the new disk to the start I did with my old laptop because the CD/DVD drive didn't read the old CD.

• Satellite Pro A60 and Port Replicator

  I JUST BOUGHT A SATELLITE PRO A60 AND USB2 PORT REPLICATOR. WHEN I ATTACH MY LASERJET 1100 AND PRINT A TEST PAGE IT PRINTS WELL BUT IF I PRINT A WORD DOCUMENT IT RELEASED FOR EXAMPLE GOGGLEDYGOOK. CAN YOU HELP ME?

  Hello

  I understand your problem in this way.

  You have connected the printer via Port Replicator ports for the A60 SatPro.

  Œuvres driver and so on correctly because the test page can be printed. But when you want to print from Word the printer isn't or what do you mean by "GOGGLEDYGOOK".

  Could you describe a little more detailly and give us some more information like Toshiba shipped OS or MS based installation, Service Pack installed, the name of the printer and so on...

  When you want to validate this information, it would be easier to help you!

  Bob

• Satellite Pro A60: Generic Host Process for Win32 Services has encountered a problem

  Satellite Pro A60 - Win XP Pro SP2.
  I recently started getting this error:

  "Generic Host Process for Win32 Services has encountered a problem and needs to close." We are sorry for the inconvenience. »

  and I was wondering if there are any known issues specific to Toshibas or specific to the operating system?

  Any guidance advice appreciated.

  Well, it could be a virus or malware.
  I recommend you to update all your anti anti-virus applications and if you have not installed a program such as ad-aware or spyware so you need to do.

  Check if your all the service pack are up-to-date. Last use the installtion of new OS could help