using the arrow keys when you play.

Similar Questions

• Print layout on screen rotation when you use the arrow keys

  I must have accidentally pressed a wrong key combination.  Now, when I use the arrow keys on the keyboard while typing of text, orientation changes screen, according to which key I hit it, I hit the down arrow, the text on the printed page rotates 180 degrees.

  How can I fix it?

  Biggar Gordon

  Houston, Texas

  Thanks for your reply.

  I googled the question of fun and learned you can hit CTRL + Alt + an arrow key to change the direction of the display on the monitor.  Pressing on the same new keys cancels the function.  I must have accidentally done to create the mess in the first place.

  I've done the same thing if I had rebooted the system.

  Thank you very much!

  Biggar Gordon

• When I use the arrow keys in firefox to go forward and back, the cursor erases tiny pieces of letters.

  Even within this field of text that I type, everything is normal, but a back using the arrow keys (and then spacing also forward using the arrow keys as I go back to typing) deletes chunks of the text. Once I have started typing again in this area, the components are deleted to normal. This effect can be captured in a screenshot. After inspection, it seems to be a second invisible cursor, a character to the right of the cursor visible. So when the back arrow back, the invisible cursor trails that visible, destroying the text behind. When the spacing before using the arrow keys, the text gets fact sinking in front of the cursor visible.

  Try turning off hardware acceleration.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.

  If disable hardware acceleration works then check if there is an update available for your graphics display driver.

• When I restart and press f8 to go into safe mode, I can't scroll to the top I use the arrow keys, but she will not go up

  It shows the possibility to go in safe mode, but I can not just ride to select

  Try using the arrow keys on the numeric keypad (key '2' and '8'), but for those to work, your "Num Lock" must be disabled.  (Press the NumLock key, until the light Verr off Num).

  If this does not work and you are able to boot into normal mode, you can configure so that it starts in safe mode using "msconfig":
  Start-> Run-> "msconfig".
  Start msconfig, click on:
  Win.ini (tab)-> and then place a check mark in front of "/ SAFEBOOT"-> click on 'OK '.
  Restart your computer.
  He will then start safe mode.

  HTH,
  JW

• Control using the arrow keys

  I hope someone can help. I am new to Flash CS4 - yet to learn - and that must have left me speechless for days! Deadline is always the same...

  I'm redrawing a powerpoint presentation that contains a lot of graphics etc (total 29 slides) and I want to animate it in Flash. I developed everything in Illustrator and I am now at the stage of do this everywhere Flash.

  Once I have everything Flash and animation, what I want to do is let the presenter (my client) to control playback using the arrow keys (aka powerpoint). My intention is to have labels for the various steps in the graph where the animation stops (using stop();) and then when the presenter press the right arrow key presentation will continue to play. I also need the left arrow key to return to the previous where label they advance too far or they must go back to look at something.

  Also, I was wondering what best practice would be creating something like this. Should I create separate Flash files for each 'slide' and load (really do not know how to do this) or use separate video clips for each slide in a single Flash file? My lack of knowledge leaves me wanting to build along the timeline of a, but I guess it would get too complicated...

  My apologies if this has been answered elsewhere, but after a search both the Adobe and the web site, I can't find an appropriate solution.

  Thanks in advance.

  The code probably told "stop (...)". "You can change that to gotoAndPlay (..." and then add stop(); instead in the timeline. ")

• I can't scroll my podcasts more since the update to iTunes 12.4. I can only use the arrow keys to go through my podcasts, and then take it all down.

  I have a MacBook Pro and update to the latest iOS and iTunes. I can't scroll in my podcasts to choose which episodes to synchronize. I can only use the arrow keys to navigate, but then while he list of podcasts on the left, it moves also down from the bar on the list of episodes, so by the time I spend the first 7 or 8 I can't see the episodes more to choose which to add/remove.

  Same here, very frustrating.

  I found if you go in your library > Podcast, then control click on the podcast, you can select Add to the device, which works, but is in no way acceptable.

• Moving an object using the arrow keys

  I think I've changed the default distance to move an object using the arrow keys of 1 Point (1/72 inch). Can you help me change the default or tell me how to set the distance you can move an object such as a text field using the arrow keys. Thank you.

  It is based on your grid interval setting in the drawing AIDS palette. For a grid of 1 point, you would need apart 12/pc (although it says the points of the grid is picas, points 12-pica).

  I find 1 point too fine, I use a grid of 4/pc (3 points) and I have all my subject base around multiples of 3 measurements.

• Fine enough culture shots using the arrow keys LR3 - no box!

  I just upgraded from LR 1.3 and I am used to using the arrow keys to make movements very well to a picture in the window of cultures that I would struggle to do exactly with a mouse, which is only a few pixels. However, LR 3.2 movements made by the arrows in the window of culture seem to be HUGE in comparison. Maybe the number of pixels increased was because everyone is shooting at 18Mp instead of my humble 8, but it is anyway that it could be fixed?

  Perhaps there is a modifier key for fine adjustment, of that I'm not aware? Movements [MAJ] Although a 50% crop to mid-way through the image and the [CTRL] reveals the angle adjust makes and the cursor icon arrows change the image.

  Suggestions anyone? (If you suggest a higher resolution camera, please send a cheque more!). Thank you.

  key Alt on PC.

• Firefox is a cursor in the window html pages that can be changed to spoil the option to scroll using the arrow keys

  Whenever I click in a window to scroll through my arrows is put a cursor in the window and scrolling out of it, instead of scrolling the entire page using the arrow key it scrolls by the location of the cursor within the window as a word document.

  Press F7 to disable the keyboard navigation.

  http://KB.mozillazine.org/accessibility.browsewithcaret

• Is it possible to set up a slideshow in Muse that will allow a user to use the arrow keys on the keyboard to advance the slides in a browser?

  Is it possible to set up a slideshow in Muse that will allow a user to use the arrow keys on the keyboard to advance the slides in a browser?

  Hello

  Take a look at a similar debate here

  Re: To navigate in the slide show with the arrow on the keyboard?

  keyboard control arrows to slideshow and lightbox Widget

• error message saying that it is the wrong key when you use a sticker

  Product key

  I have an OEM version of vista Home premium. I'm trying to load on an acer extensa 5420 using the product key on the bottom of the laptop. When I enter the key, I get an error message saying: it's the wrong key. How can I use this disc to reinstall windows?

  Hello

  The OEM recovery disks are the brand and the specific model

  You can't use a disc from another manufacturer

  How to reinstall Vista

  Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• How can I move precisely image in the monitor by using the arrow keys?

  I am currently using first 13 items on my desktop Windows 10. When I use the special effects of culture, I am able to precisely position the top, down, left and right limiters by typing in a decimal percentages. It works very well, especially when you try to manually move the limiter in the monitor by holding down the left mouse button and dragging. Enter the percentage allows the adjustment takes place easily.

  However, I was unable to find a similar positioning tool for when I want to move the image in the monitor. The only way I know to move the image currently is holding down the left mouse button and dragging the image. What would be the most direct and intuitive way (for me) to precisely move the image, once you left mouse clicked on the clip to show the white frame with its 8 small white squares, simply hold the CTRL key, and then use the 4 arrows to position the image. However, holding the CTRL key and pressing the keys 4 arrow do not work, or not keeping the Alt key and pressing the key 4 arrow, nor does not hold down Shift Ctrl, shift, or Ctrl Alt Shift For me, it would help greatly to a precise positioning, if I could hold the CTRL key and press the arrow key should be.

  Anyone happen to know how to position an image in the monitor otherwise than by holding down the left mouse button and dragging the image where you want?

  Thank you

  With the clip selected on your calendar, click effects applied on the right side of the interface.

  In the effects Panel, open the path properties. Here you can define the Position and the scale and Rotation of your clip. You can also effects and keyframe animated trajectories.

• using the arrow keys to change the face of an object

  I have an MC which can be moved with the arrow keys. When a person presses the left button I want the object to face left and do an animation for as long as you press the left key. By releasing the left button I want animation back to her starting framework but the MC has yet to face left. I want the same thing to the other arrows, but the animations will be different for each direction (for example: walk right, left foot, foot of you, walk towards you). What is the best way to do something like that?

  use something like:

  var dir:String;

  {if (Key.isDown (Key.Left))}

  dir = 'left ';

  Player._x = speed;

  Player._xscale = - 100;

  {if(Player._currentframe==1)}

  player.gotoAndPlay (2);

  }

  }

  {if (Key.isDown (Key.Right))}

  dir = 'right ';

  Player._x += speed;

  Player._xscale = 100;

  {if(Player._currentframe==1)}

  player.gotoAndPlay (2);

  }

  }

  {if (Key.isDown (Key.up))}

  dir = 'mounted ';

  Player._y = speed;

  {if(Player._currentframe==1)}

  player.gotoAndPlay (22);

  }

  }

  {if (Key.isDown (Key.Down))}

  dir = "down".

  Player._y += speed;

  {if(Player._currentframe==1)}

  player.gotoAndPlay (33);

  }

  }

  If (!.) Key.isDown (Key.DOWN) &! Key.isDown (Key.UP) &! Key.isDown (Key.RIGHT) &! {Key.isDown (Key.LEFT))}

  player.gotoAndStop (dir);

  }

• Navigation in a tree by using the arrow keys

  When you click the arrow in a part of the tree down, she shows the empty fields, calling for the creation of documents rather than move down through the tree or child.
  
  I used the key press trigger button-up and set it to null and also tried to change the single record for block on yes. None of these works also tried setting the navigation tree object property. But nothing works.
  
  The user is looking at the data of correcespoding, but when you clik downwards, the corresponding data of all that disappear and it seems to be a new record created.
  I also have a list box on some of the blocks of data.
  
  Or is it possible to grab the button pressing trigger and ignore it programitacally?
  
  Thank you
  
  10 gr 2 forms

  Find your tree WHEN-TREE-NODE-SELECTED-trigger, I guess that there is a logic that is causing your problem.

• Why can I not use the arrow keys to scroll up and down Web sites more?

  When I'm on a Web site and I click anywhere on the Web site there is a flashing bar - sorry, don't know the technical term - you would find in a new document on hold for the next character to appear to the left of it. It's almost as if FF - not the Super-team - want to add me to test any page I find, but it's just a weird error.

  I assume it's because of this glitch (assuming) that when I go to press the up or down arrow keys it no longer cascades the screen smoothly like a parade of content; instead it just hops from top to middle to bottom and that's when it does anything. What gives?
  

  That behavior is characteristic for the active Keyboard Navigation . Press the F7 key, only once, and then test to see if things return to normal. The F7 key is a key off voltage for the keyboard navigation: http://kb.mozillazine.org/Scrolling_with_arrow_keys_no_longer_works