Satellite Pro C870-172 - need new motherboard

Similar Questions

• Satellite Pro C870-172: how to use the Fn keys by pressing the FN key

  I recently bought a Satellite Pro C870-172 and I found that the FN key is used by default.

  I mean that if I need to use the normal F1 or F2 key, I have to press "FN" + F1 or F2 etc... otherwise I get the function of toshiba. which would be fine, but in a lot of technical programs, I need to use the normal F1 F2... touch!

  is there a way to reverse the default system so that when I press the F1 key, I get the F1 function and when I press FN + F1, I get the toshiba service?

  Thank you

  M2

  Yes, go to the BIOS by pressing F2
  Now switch to the Advanced tab, and then open the System Configuration.
  Here you will see the option called: mode of the function (without pressing Fn first) key
  This option should be disabled.

• Satellite Pro P100 - PSPA4E: need new drivers

  Hello

  I'm looking for drivers for the PSPA4E. The reason is to improve the units from XP Home to XP PRO.

  Thank you very much for reading this

  Hello

  I guess that you are talking about PSPA4E, the Satellite Pro P100
  Well, this is a whole new notebook from Toshiba and it was delivered with the latest drivers.
  I think that all newer drivers are preinstalled on the laptop.

  I'm sure that if the new version of the pilot will be available if you can download it from this page:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  concerning

• Satellite Pro A210 PSAFHE: need new HARD drive compatible

  Hello

  Jealous of my relationship with my Tosh laptop - my wife - angry of stupidity, decided to slam closed
  OOPS, it no longer works.

  After cooling down - she did not apologize, BUT said she would pay for the repair.

  After investigation, I feel it may be the hard drive - I have re-installed from master disks and it worked sort of--even allowed to install aol.
  AND he then stopped loading - hearing closely it seems to be looking for the hard drive to complete the load.
  It's a Toshiba Satellite Pro A210 IB1 model PSAFHE - 00800PEN and has a Hitachi hd
  HARD DRIVE: 5K 250-160
  Model: HTS542516K9SA00 5 v DC 700mA 160 GB SATA 5400 RPM

  I can't seem to find one anywhere - tried to contact Toshiba to know what would be appropriate replacements - picking the winning lottery numbers would be easier to get through Toshiba. So I thought I would try the forums.
  In my opinion, it's the hard drive BUT as a mere mortal, I could be wrong - all advice would be appreciated.

  Please tell us what drives fit
  concerning

  Hello

  It seems that the laptop supports a HARD drive 2.5 SATA.
  As the controller SATA HDD has no limitation, all SATA 2.5 hard drives should be compatible.

  If you want, so you can choose a 250GB 2.5 SATA HDD THAT and normally it should work as part of your laptop.

  Welcome them

• Satellite Pro C870 - Win8.1 update - error 0xC1900101 - 0 x 30018

  Hello there,

  for seven days, I try to update my system to WIN8.1. on the first try, I get the 0xc1900101 - 0 x 30018 errorcod.
  I already did a reinstall of WIN8 and uninstalled everything except the networkdriver. Allways get the same message. The installation seems to work fine until deviceconfiguration 64%. Then it restarts and redefines WIN8.
  My system is Satellite Pro C870 1EJ
  Need some help, or better a solution.

  THX

  verzweiflix

  This problem has been reported several times here in the forum and has been resolved as indicated by user harrie_1 on January 12, 2014

  Search in this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=74631

  Next to the workaround solution posted by harrie_1, you can try to solve the problem of updating through the stages which are:

  Uninstalling AV and firewall disabling
  Go Wi - Fi usage for a thread using a network cable
  Remove AVG
  SFC scan
  Disable Wi - Fi
  Update the BIOS
  Remove additional USB devices

  Welcome them

• Black screen on Satellite Pro C870-1CJ

  Good night

  I have a portable Satellite PRO 1CJ C870. A few days ago I got a blue screen showing display problems and since then, the laptop screen is black and there is no picture shown in it. I am entered mode secure and tried to connect it to a VGA monitor with success.
  As I guess it was a problem with the graphics card then in the blue screen message, he made atikmgpag.sys that I tried to install the latest version of the graphics driver t but no news on the laptop screen.
  I also tried Toshiba Tempro, which has not had the success also. I have tried several things without result.

  Can anyone help me to solve the problem? I'm a bit desperate.

  Thank you

  Gabriel

  As far as I know your laptop Satellite Pro C870-1CJ was equipped with two graphics cards:

  1 - internal Intel Graphics HD 4000, which is part of the Intel CPU
  2 external ATI Radeon HD M 7610

  The error that contains information about the atikmgpag.sys file seems to be related to the ATI graphics card driver.

  I'm not sure, but it might be possible that the graphics chip from ATI external began to malfunction.

  Anyway, if possible, try to retrieve the laptop as mentioned by Liam
  If this is not possible, the material may be affected and it could be costly to repair.

• Satellite Pro C870 - 19(d): Windows 10 - BT seems to have problems

  Hello

  our laptop Satellite Pro C870 - 19(d) works very well under Windows 8.1. Now the tool Advisor Windows 10 registration and upgrade has been installed automatically by Windows Update and it says that the two internal Bluetooth components of this laptop is not compatible with Windows 10.
  Currently, no driver updates Bluetooth is available via Windows update driver online or via Toshiba Service Station.

  Is there a update driver in the near future that ensures compatibility with Windows 10?

  Best regards, Hans-Georg

  Hi guys, the Windows 10 is not officially released by MS, and currently Windows 10 drivers are not available for all Toshiba laptops.
  I think you need to wait that Toshiba would start the support to win 10. I guess that this will happen after the official release of win 10.

• Satellite Pro C870-1E2 - internet connection problem Proxy Server not responding

  My old Toshiba computer connects to the internet via a numbered port,
  yet my new Toshiba Satellite Pro C870 1E2 connects to the internet through a proxy server.

  Why I ask because this morning when I started, I was unable to connect to the internet and all that appeared on the screen was the message "Proxy Server not responding."

  When I tried the old computer connected instantly he had to wait a long period of time before that the "proxy" got it's act together.

  Advice please?

  > Why I ask because this morning when I started, I was unable to connect to the internet and all that appeared on the screen was the message "Proxy Server not responding."

  And why you think you ve you have a problem with the Satellite laptop? I understand the original message: the Satellite acts as client.
  In my eyes there is a problem with the proxy server, and this should be checked first.
  Its almost impossible to tell which could affect the proxy, but as a first step, a reboot would be desirable.

• Re: Satellite Pro C870 - No Wireless, code 43 error

  Have two new Satellite Pro C870 where the wireless has been disabled at the start of the second. NETWORK card wireless in the Device Manager has an exclamation point and showed "Windows has stopped this device because it has reported problems. (Code 43) »

  After you perform a restore of the system, as indicated by the support, the question was always there.

  Just before sending the two laptops off the coast for repairs I undid a parameter called "quick start" in the bios (otherwise defined by using a utility from Toshiba).

  Issue seems to have erased after that.

  Is everything OK?
  If this isn't the case, I recommend you to reinstall the OS using HARD drive recovery facility. After that this laptop will again have factory settings and everything should be OK again.

• Satellite Pro C870 - 1FL PSCBBE - not more than Bluetooth after upgrade to SSD

  I have a Toshiba Satellite Pro PSCBBE C870-1FL with 64-bit Windows 8.

  For a Crucial m500, I changed the 240 GB hard drive.
  With this disk, Windows cannot find the bluetooth adapter:

  WIN8/64 on original HD - Bluetooth OK
  Win7pro/64 clean installation with the original site HD - OK Bluetooth drivers

  WIN8/64 restored rescue DVD - SSD - Bluetooth adapter not found
  Win7pro/64 own facility managers website on the SSD - Bluetooth adapter not found

  Please can you help me make Bluetooth works with the SSD

  Concerning
  Harry

  Hello

  From my point of view it s not matter if you use the SSD or HARD disk drive.
  This should not affect the functionality of BT.

  I think that its driver / software problem and, therefore, you should check this first
  Satellite Pro C870-1FL was equipped with a Realtek WLan / BT combo card.

  The driver BT / install the software according to the system you are using.
  So in the case of Windows 7, you need to install the package of added Value Toshiba, Realtek WLan driver, packet filter for the driver Realtek BT and BT Toshiba stack.

  In the case of win 8 you must install the driver of Toshiba system and the Realtek Bluetooth driver Package filter

  Please check the two options

• Satellite Pro C870 Windows 10 is supported

  Hello
  I have icons on MS that make upgrading my WIN7 for WIN10 free of charge.

  My Satellite Pro C870 or not FULL compatibility on WIN10?
  Thank you
  Giovanni

  Satellite Pro C870 isn't in the Toshiba models supported for upgrading to Windows 10 Web site.
  http://win10upgrade.Toshiba.com/swup...SPX?region=TEG

  This means that this model of laptop won't get Windows 10 drivers and software, but of course the Windows 10 installation is possible

• Satellite Pro C870 - Internet connection fails after a fashion 'sleep'

  SATELLITE PRO C870-19N. Internet through an ethernet cable. Windows 8.1

  Hello

  My problem:
  I turn on the computer. It recognizes the connection internet (Ethernet cable). I work without any problem... and I left (a few minutes)... I come back. Black screen, computer sleeps. I wake it up - I have to enter my password - and he says there is no internet connection... I have to stop it and restart it.

  Can you help me?

  Thank you.

  This problem occurs using only the LAN connection or have you noticed the same situation using Wireless LAN?

  In case this happens only by using the LAN connection, I recommend you to check if you can update the LAN driver.

  You can also right click on the network icon (in the taskbar) and could choose to diagnose and repair.

• Satellite Pro C870 can run on the 5 GHz band?

  My laptop model Toshiba Satellite Pro C870 1E2 can run on the band 5 GHz with Windows 7 Pro 64 bit. Tried to ask this question to Toshiba, but it seems to be a technical problem it so impossible to transmit my question for them.

  Hello

  The frequency of Wlan depending on the WLan card.
  I think that the laptop was equipped with WLan RTL8723AE Realtek card that supports the 802.11 standard B / G / N standard

  5 GHz is only available using 802.11 A or N

  802.11 N standard works on 2.4 Ghz and 5 GHz but 5 GHz is available ONLY if the WLan card would support additional one 802.11 standard; That is to say 802.11 A / N.

  But Realtek RTL8723AE doesn t support 802.11 has and therefore the 5 GHz are not possible for this WLan module.

  Here's a similar thread on the same topic:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=64003

• Satellite Pro L870-172 error 003 when retrieving the recovery DVDs

  Hi all

  Having a devil of a time with this portable darn. So I bought the recovery dvd. tried to boot from the disk and comes with no OS bootable. Thinking it could be a problem with the optical drive, I created a bootable usb key.

  Received the usb key to start

  So I goto Toshiba Recovery Wizard
  Press Yes to say it will wipe the drive.
  Retrieves the software factory default
  In the end, I get an error message

  Error: 003
  Recovery error

  Press ok to start the computer

  You can see the final screen here.
  https://DL.dropboxusercontent.com/s/1fq5yk4t9hjhmk9/2014-09-05%20at%2012.38.PNG?DL=0

  Can anyone help plleeaaaseeee.

  The only thing I can think is that maybe when I created the USB startup key should I copy then disk2 on the stick as well using xcopy.

  I think there are several reasons for the error.
  The recovery media or the hard drive is may be defective. Wrong settings of the BIOS, etc...

  I recommend you to check once more the Toshiba Recovery bootable disc.
  I don t think that there might be a problem with the optical disc drive.
  From my point of view, it could be a bad BIOS setting.

  The Satellite Pro L870-172 has been pre-installed with the system Win 8.
  Please check start secure as well as the UEFI boot mode option in the BIOS.

  Generally, in order to be able to boot from different devices to boot, secure boot must be disabled.

• Re: Satellite Pro C870 - Blue Ray player driver downloaded through Tempro

  Hello

  I have a Satellite Pro C870-10F Windows 7 Professional 64-bit with Tempro me a well-informed driver I could install (a Blue Ray player driver). TEMPRO should be reliable... but first of all my Panda antivirus disabled the script installation, and when I disabled the antivirus protection, I ran again the installation of this driver and that he got an error on a file missing. I was not able to proceed with the installation at all.
  someone at - it had the same problem?

  The cause would be that I installed VLC Media Player?
  Thanks for your help.

  Last days, few people have reported on this notification Tempro. According to the specifications of the laptop your laptop doesn t have Blue Ray optical disc player, so I think that this update of the driver is not important to you.