Satellite Pro L300 no screen display

Similar Questions

• Satellite Pro L300 - white screen after login

  Hi, got a laptop off a friend to watch as not start correctly. Vista Edition running Home Premium, it will start up the screen of the user ok but when a user is selected the screen goes white with just the mouse pointer showing (which moves ok on the touchpad). I can press Ctrl Alt Delete and get the blue menu screen - if I try the Task Manager with it it goes back to the white screen.

  I tried a repair of end upward to F8 but said no problems found. I can also start ok in Mode safe without getting a white screen. I tried a high diagnostic of MSConfig startup but still the same. I also disabled all services but still a Virgin.

  I have a secondary partition on the disk with the recovery of HARD drive there, but do not want to reformat. I tried to restore to several different, but restore points remains empty at the normal start screen.
  Someone at - it find it.
  Mark

  Hello

  Its hardware problem or software.
  Start the laptop in safe mode means that some essential software process would be disabled and the system would use only a few basics of essential equipment.

  So even if the laptop runs correctly in safe mode, it could be a hardware problem.

  That's why I think only with the help of HARD drive recovery would be the best way to know what's wrong here...

• Satellite Pro L300 PSLB1E - black screen / no display

  Hello

  hope someone can point me in the right direction. I just bought a re-conditioned by Satellite Pro L300 Model PSLB1E of Dabs.com.
  He worked for about 20 minutes and then I got a blue screen error (I think that I just tried to open Windows Media Player when this happened).
  Sorry, but I didn't note down the error however seem to recall he mentioned win30.dll?

  Now, when I turn on the laptop I can hear things fan etc but there is no display on the screen.
  I don't know what to do and I have no warranty documentation.
  Suggestions this is appreciated please.

  Are you able to start, any bootable disks, Win XP, Win Vista, Linux live CD, etc.

  Please check this!

  But if you will not be able to boot from these disks, then you must contact the ASP (authorized service provider) in your country, because this problem looks a little more hardware related problem.

  Good luck

• Re: Satellite Pro L300 - screen resolution maximum?

  I just bought an external monitor for my L300. The screen resolution is 1920 x 1080, but the maximum available on my L300 is 1280 x 800. The utility Service Station tells me that all my drivers are up to date - is there a way I can increase the graphics resolution? Any suggestions much appreciated!

  Details: Running Windows 7 Pro SP1 on a satellite Pro L300 PSLB9A - 02K 002

  Hi PeterSouthon,

  Need to unlock the other screen resolutions. Simply uncheck the option Hide modes that this monitor cannot display as you can see on [THIS | http://blog.wildvista.com/wp-content/uploads/2009/12/Lightroom_hide_modes-340x400.png] photo.

  After unchecking this box, you should be able to use the native screen resolution of your external display.

• Satellite Pro L300 - 29 c very dark display

  Hello

  The display on my Satellite Pro L300 - 29 c is very, very dark. It's dark, both during POST / in the BIOS and configuration once Windows loads. The brightness of the screen (Fn + F7) is set to the maximum. If I plug in an external display, which works perfectly. I can say that this model is not a physical wheel or something similar that controls the brightness of the screen.

  Should I have a hardware failure? Is this something fixable by the user?

  Thanks in advance.

  I can't say for sure, but I think FL inverter is faulty (backlight) and it should be replaced.
  The FL Inverter control the backlight. It is important that FL Inverter are not too expensive part.
  I take in a Toshiba certified maintainer and ask for help.

• Satellite Pro L300 - Display works only on the external monitor

  I received my new Satellite Pro L300 tonight & followed the instructions one by one. Although the power etc. lights were turned on, I had no monitor display at all. I then plugged on my old pc monitor who * fact * work. I tried pressing Fn + F5 but still nothing on the screen of the laptop?

  Thank you, Adam.

  I think you need to bring your laptop to an ASP. They can check your laptop and exchange all necessary parts.
  I think that your laptop is under warranty, if the repair is free for you :)

  On the Toshiba site, you can search an ASP:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Good luck!

• Satellite Pro L300-1FN does not start - hang at the BIOS splash screen

  My Satellite Pro L300-1FN refuses to start. When turned on the laptop displays the home screen toshiba/insyde H20 BIOS and the message "press F2 go to the Setup utility, F12 to go to the start menu" and flashes the light access to the hard drive, but don't try to continue loading. I left the bios at the start screen, but it doesn't do anything for long hours on a power supply or is running the battery flat while on battery.

  Is there a way to re - put the BIOS on this unit? If it's a desktop unit I would remove the CMOS battery to force a reset of the BIOS but that's impossible on a laptop. The hard drive is fine because I have it plugged into another system to remove valuable data.

  Hello

  What happens if you press F2 when starting the laptop to the top?
  You can access the BIOS?
  If so, access the BIOS and set its default value. I think you need to press F9 or F10 to get default parameters, but this will be mentioned at the bottom of the page of the BIOS.

  Check it!

• Satellite Pro L300: How to change the display settings

  Hi I have a toshiba satellite pro l300 run a pentium dual core and intel 965 display chip any games I play on my laptop, they open in a small box and not full screen I've had a quick glance at the settings to try to resolve this with no luck.

  Can someone tell me if there is a way to change the settings to get the games to play in full screen, my current display settings are 1280 x 800 pixels and running at 32-bit color.

  Any help would be appreciated.

  You should set this option to full screen in the games you play. Checked for these options, because you are given something like graphics, solution details and in most cases should be windowed.

  One thing you might try is to uninstall your current display drivers, and then reinstall new ones. Make sure that you use tools like ccleaner cleaning record or similar.
  Check if you have installed all the latest updates of windows and directx version, if you are using Windows XP.

• Satellite Pro L300 - cursor black screen flashing

  Hi all

  I have a Toshiba laptop Satellite Pro L300 Vista.

  The customer earned him in because when it starts it goes to home Toshiba screen then goes to a black screen with cursor flashing at the top left. I connected external monitor with the same result. Swapped RAM as well.

  Have run Memtest (spent), Seagate HDD long test (past), Ultimate boot CD and Winternals without success.
  * F8 does not work * and no more than the resumption of the plant.

  Can enter the BIOS F2 and F12 no problems and the HARD drive is listed.

  I reinstalled Vista on CD and on reboot it goes back to blinking cursor. I tried booting from the Vista CD repair and system restore. FixBoot commands and FixMbr prompt as well as with the same result.
  I feel that it may be a corrupt CMOS sensor? It's like the OS installs correctly, but the computer loses his memory on reboot where the operating system?

  Is the battery CMOS easily accessible and removable on this model?

  Has anyone experienced these symptoms? Is - fixable at lower cost?

  Hello

  If you have clients, I guess you're a technician and hope you have a few pieces of equipment in your store.
  Have you tried to set the BIOS to default settings and check again?
  If possible try to exchange the HARD drive and test the functionality again.
  You can use laptop with Linux live CD (HARD drive not required)?

  To be honest that I think n problem t is ORGANIC and, in my opinion, the exchange of the CMOS battery is not necessary.

  Please test it with the new HARD drive and post comments.

• How can I fix the screen on Satellite Pro L300?

  How can I fix my screen Satellite Pro L300? I went by mistake about it.
  Although there seems to be nothing wrong with the external armor but there seems to be a few lines on the screen.

  The glass is cracked? You see the flow of liquid crystals when you move the screen?

  If the lines are perfectly horizontal or vertical, and then the glass behind the protective plastic surface is cracked, requiring a replacement LCD.

  An authorized service provider can give you a new LCD Module. Visit the Web from Toshiba for a list of the ASP

• Satellite Pro L300 1AI LCD screen backlight not working not

  Hi all

  I have a Satellite Pro L300 1AI running Windows Vista the computer starts and works fine but the backlight on the screen doesn't seem to work.

  Y at - it none of the Vista settings that can affect this (other than the Fn key command on the keyboard and settings) in Control Panel? Strangely, it seems to have happened since I installed Skype but I don't see how this could possibly affect it.

  Any help is much appreciated...

  Hello

  What s wrong exactly? Brightness screen laptop s is too low?
  Everything you see on the screen as behind a thick fog?

  Well, usually the FL Inverter control the backlight of the screen and if the FL inverter starts to malfunction, so you would get the problem like this.

  There is no alternative to replace this inverter FL.
  It s a small part behind the frame of the screen I think that it s a job for a technician in ASP.

  Welcome them

• Satellite Pro L300 1AD is unable to install the Windows XP display driver

  I just installed XP on my Satellite pro because my internet modem doesn't work with Vista.

  I went to the main site of Toshiba to install display drivers, but they moved it, it keeps bringing the message "this driver is not for this computer please contact manufacturer.

  I put t understand why because all the other drivers that I downloaded on the same work, it's just the display one page. Does anyone know what's wrong?

  You have downloaded the latest driver for Satellite Pro L300?
  On the Toshiba site it s version 6.14.10.4953.

  An alternative, you can try the drivers from Intel, but normally the Toshiba driver should work.
  I always use the driver from Toshiba and never had any problems.

  Furthermore, I looked on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com

• Satellite Pro L300-152 - unable to connect to TV, projector or a external monitor

  Hello
  Peuvent some please help?

  I bought a Satellite Pro L300-152, model without PSLB1E-01R015EN with Vista 32 bit a few months ago to replace an old Toshiba laptop not.

  The problem I have is that I can't connect external devices such as TV, projector, or a monitor.
  I used another laptop in the past with my TV and projector and have had no problems at all. I connected via the VGA port, as it is the only port with the exception of USB. Using a VGA cable, I tried all the settings that I have used in the past, but with no joy.
  I did the setting in the display settings and the FN + F5, but nothing comes up on the external screens except no signal.

  I tried to solve this problem for months and need help, please.

  Thank you
  Karl

  > When I try to update the bios driver I get a message: insydeflash the virsion or ROM file is not newer than the version of the BIOS?

  Strange what s... what version of BIOS is installed on your laptop?
  As much as I know at this time the European Toshiba page provides the version of 1, 50 - WIN update of the BIOS for this model of laptop.

• Satellite Pro L300-291 - how to get the work of resolution 1920 x 1080?

  Hello

  Really bad, my old PC and laptop can connect to my external monitor to 1920 by 1080, which is the native resolution of the screen, even made my Xbox 360. But won't my Toshiba Satellite Pro L300-291, it tops out at 1680 by 1050 and will not display anything higher. I tried the latest drivers without success. What is a physical limitation on the laptop?

  Thank you

  Mark

  Hey Buddy,

  I agree with the user above:
  -Check the user manual and
  -Check out the features of your graphics card

  Then you will find information which screen resolutions are supported and not. In addition, don t compare it with other laptops or devices. Not all laptops are the same, there are different hardware, etc.

• Satellite Pro L300-software-service says I need update graphic driver

  I downloaded the software http://designbyme.lego.com/en-us/default.aspx DesignByMe

  The installation runs without a problem, but when I start the program it restarts again and again. The charge of doesn´t photo entirely, instead of this there are black spots. I have can´t click on anything that either, or near programm. I thought that maybe the installation process has not completed correctly so I downloaded the software again, but the problem is always the same. I m using a new Satellite Pro L300 28w with Windows 7 and Mozilla Firefox 3.6

  I contacted the support of lego and they replied: "probably you need to update your graphics driver. Please contact your customer computer manufacturers website for updated free"

  Is this possible and if so what edo upgrad I need?

  Hello

  I put t know if the update of your display driver can solve this problem, but if the manufacture of the software said that it s worth a try! ;)

  The update is simple enough: first download the latest version here:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  If you have downloaded the latest version, remove the old first. Check the list of software in the control panel and follow the instructions on the screen. I guess you have to do a reboot and after that, you can install the downloaded version.

  Good luck! :)