Satellite Pro L300: Noise of nasty when connected to your hifi installation comments

Similar Questions

• Satellite Pro L300-1 b 9 cannot connect to my wireless router

  Hello!

  I activated the nw wireless on SAT L300 PRO 1 b 9 - but with a lot of struggle...
  First I had to find the switch to turn on (I never got :-)).
  Then I had to uninstall Atheros Windows and set flags on (activate) in the Windows driver.

  But in Linux and Windows, I couldn't connect to my wireless router.
  My luck was that some of my neighbors have a wireless network security-disabled, open, I could map to test.
  The test was succecfully with this network, but my wireless router was inaccessible.
  The other machine I could reach it.

  The result was:
  If I set the router to broadcast the SSID, the two OSs (Ubuntu + Windows) can use the wireless network.

  But if I turn off the broadcast (to protect my router), the network driver is unable to use my router, it does not matter I set the SSID...

  A router is WRT54G, and he works with other computers if I hide the SSID, but as Satellite Pro L300 unable to connect (with this option).

  Someone knows why? What should I do to I could hide the SSID to the bad guys?

  Thanks for any help!

  With regard to:
  DD

  I put t know what Windows operating system you use, but if you use original Vista, I think that, good WLAN driver is part of the package. For the wireless network adapter must be properly installed.

  It is not easy to say what the problem is here, but if the laptop can see and detect your WLAN network side laptop computer s everything should be OK. Try to reboot your router and check all the settings.

  In my opinion, there is a problem with the WLAN settings.

• Satellite Pro L300 PSLB9E: 100Mbit instead of connecting to the network local 1000Mbit WinXP

  Downgraded to WinXP.
  Have downloaded all the drivers available from Toshiba support, but still cannot get the speed of 100Mbit connection. I guess it's an another downgrade of the bios needed to support the XP operating system?

  Hello

  Your laptop supports Ethernet 10/100 Base-TX.
  This means that the network card supports the standard of 10 Mbps and 100 Mbps.

  I put t know why you expect at a higher speed, but the 100 Mbps is the maximum value for this chip to Base - TX LAN Realtek 10/100

  Welcome them

• Satellite Pro L300 will not connect to Wifi after hibernation

  Hello

  can someone there help me please?
  I have a Satellite Pro L300 and it does not connect to Wifi after hibernation.

  The only way to do it is to restart the pc.

  Any suggestions?

  Hello!

  I m using a Satellite L300, which should be similar to yours and I peut t noticed this problem. WiFi works perfectly without any problems.

  In any case, I would recommend updating the driver WLAN and the BIOS. The two you can find on the Toshiba site:
  http://forums.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  In addition, you run the factory settings or you have installed a different version of Windows?

  Good bye

• Satellite Pro L300 - network adapter failure

  I was running my Satellite Pro L300 on a Belkin router connected to my DELL desktopsuccessfully wireless, except that sometimes the adapter on the Satellite failed and I had to restart the portable computer to restart.

  The other day I decided to reinstall windows XP on my desktop, because he soon grindingly.
  All worlks OK and I can access the internet from the desktop and my laptop is picking up the signal from the router but will not let me connect.

  The network shows under available networks, but when I try to connect it says "windows could nto connect to the WLAN.
  The network icon has a red line through it. I updated the driver and according to copntrol Panel operation.

  Am posting this from my office

  Hello

  Try this;
  -Start the console (in run, type CMD)
  -In the DOS window type; ipconfig / renew

  This should renew all your network cards and must assign the IP again.

  Using the ipconfig command, check if the wireless adapter is listed in the list.

• My new Satellite Pro L300 will not work

  I bought a new Toshiba Satellite Pro L300 on eBay. I connected all the cables according to the installation guide. At first he asked my details, then I logged in and it went to a pages where he says he was preparing. Then I was sent to the newspaper in the section, and the same page appeared saying that he was preparing.

  After what happens about 5 times, he went to a black screen where the only thing I could see was my mouse cursor.

  I closed and restarted, I tried to go into the settings using F12. I was not able to work at all, no matter what I do.
  Unfortunately, I don't have a CD of the OS, but it was announced as having Vista as OS and have Microsoft Office Suite on him as a built-in wireless modem, so it was supposed to be ready just to turn it on. Well I can't even turn it on.

  What should I do? How should I do?

  At first, I must say that F12 has nothing to do with all the settings.
  At this point, I recommend using the new operating system installation using the HDD recovery procedure.
  How to proceed as a result of this document, you can find > http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm

  When the OS is installed and started up properly first thing you need to do is to create the disc of recovery facilities. "You can do it using preinstalled" Toshiba Recovery Disc Creator. The shortcut is placed on the desktop.

• Satellite Pro L300-156 - WLAN connection drops every 12 hours

  Hello!

  I have a short model "Toshiba Satellite Pro L300-156" (PSLB1E).

  The system state is:

  I used the recovery CD (to install Windows XP and other software on this CD).
  I've upgraded to the latest version of the BIOS (1.50, 10/07/2008) for my laptop and I downloaded all updates for Windows XP.
  I installed the latest WLAN driver for my WIFI (Realtek RTL8187B) card.

  The problem is still there:
  Every 12 hours (exactly on the minute!) drops connections.
  Not only the Internet, but the local connection.
  It is even a kind of matrices.

  Both a connection to a local computer and "mIRC" (ssh/telnet-program) to "PuTTY" (program-chat-IRC) says "network error caused abortion of software".

  These ping connections not, they die instantly in a tenth of a second.

  Hello

  I guess it can be caused by a 3rd third party tool that was installed on your laptop.

  I mean it of really strange that disconnected EXCATLY after 12 hours of use.

  "I have goggled a bit for the message: network error: Software caused connection abort."
  And found that this error is displayed if the Windows network code decides that your network connection is dead. This will happen when you remove the cable network Ethernet-connected computer, or if Windows has any other reason to believe the entire network has become unreachable.

  I think you should check the settings of your WLan router. My router refresh / disconnects after 23,59 hours to ensure that the IP address has changed.

• Satellite Pro L300-152 - unable to connect to TV, projector or a external monitor

  Hello
  Peuvent some please help?

  I bought a Satellite Pro L300-152, model without PSLB1E-01R015EN with Vista 32 bit a few months ago to replace an old Toshiba laptop not.

  The problem I have is that I can't connect external devices such as TV, projector, or a monitor.
  I used another laptop in the past with my TV and projector and have had no problems at all. I connected via the VGA port, as it is the only port with the exception of USB. Using a VGA cable, I tried all the settings that I have used in the past, but with no joy.
  I did the setting in the display settings and the FN + F5, but nothing comes up on the external screens except no signal.

  I tried to solve this problem for months and need help, please.

  Thank you
  Karl

  > When I try to update the bios driver I get a message: insydeflash the virsion or ROM file is not newer than the version of the BIOS?

  Strange what s... what version of BIOS is installed on your laptop?
  As much as I know at this time the European Toshiba page provides the version of 1, 50 - WIN update of the BIOS for this model of laptop.

• Satellite Pro L300-PSLB1E: XP does not control the wifi to the power connection

  * + Hello + *.

  I have a model Satellite Pro L300-PSLB1E and a XP Professional SP3 on it.
  Already everything works because I had a compilation of drivers copy of the past.

  The problem is that XP does not control the WiFi works without danger the and it disconects when I close the lid.

  So I tried with the power that said safety program to:

  Bq. [06/04/08 Power Saver Toshiba Windows XP 7.04.02I | http://es.computers.toshiba-europe.com/innovation/tracker.jsp?file=http%3a%2f%2fsupport1.toshiba-tro.de%2ftedd-files2%2f0%2fpwrsav-es-20080519173239.zip] + doesn't work-error 0 x 0 +.
  And I tried also with the thought of program Toshiba wifi on 32-bit compatibility:
  Bq. [Intel PROSet/Wireless Software | http://es.computers.toshiba-europe.com/innovation/tracker.jsp?file=http%3a%2f%2fsupport1.toshiba-tro.de%2ftedd-files2%2f0%2fpro-ncs-20080416140552.zip] + doesn't work too-Said controller is not installed when you and full work +.

  So, how to control the peripheral power turn off on?

  Bq. * + thanks for your attention and patient. + *

  Hello

  Firstly the Toshiba Power Saver requires the installation of the common Module.
  The common Module for Win XP v1.00.05 can be downloaded from the European pilot page Toshiba.

  So before installing the energy saver, install common Module, restart the computer, and then try the energy saver.

  In addition the Intel PROSet/Wireless Software can be used only with the Intel Wlan card.
  Is the laptop supports the Intel wireless network adapter?

  AFAIK the L300 series can be equipped with a Realtek, Atheros and Intel Wlan card
  Check it!

• Satellite Pro L300 - may not always connect to the same strong connection router

  I currently have a Satellite Pro L300-155. At work, the WIFI signal is strong everywhere where I am in the building because we have 2 WIFI connections. However, I can connect okay in 1 room but if I just go in the other room, I'm unable to connect - and the connection is still strong. This also happens intermittently at home.
  Is it of diagnostics that I can run on the Toshiba to test wifi?

  Where can I find what chip it is? Where is the wifi location - on a motherboard, etc?
  Can it be replaced and where I could quote from?

  Thanks in advance

  Hi cooky44,

  In my opinion, you should update the routers firmware and update your WLAN driver.

  Furthermore, I have created an interesting document on improvements to WLAN connection:
  [WiFi: improved reliability of connections | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=68]

  Also check the forum similar topics WLAN.

• Satellite Pro L300 - when the old version of BIOS get?

  I have a Satellite Pro L300. I have updated the BIOS from 1.9 to 2.1. Since then the ventillator works much more, with much more noise as well.

  How can I stop it, or download the bios to 1.9?

  Hello

  Older versions of the BIOS peut t be downloaded on the Toshiba site. They are only available for authorized service providers.

  But I doubt that the BIOS is the reason for this. You should try to clean your laptop using a jet of compressed air. This could blow out the dust from the cooling fans.
  Check it!

• Chicony usb 2.0 webcam stopped working when I update from windows vista to windows 7 on Toshiba satellite pro L300-EZ1521 computer laptop

  When I upgrade the operating system from windows vista to windows 7 on Toshiba satellite pro L300-EZ1521 laptop, Chicony usb 2.0 webcam no longer works showing a message "webcam driver open fail.please restart camera or computer".in Device Manager the status of the camera says "this device is working properly".to go the control panel I select camera assistant software and clicked on change and when I try to repair a pop-up window with a message "Please insert disk 1 that contains the file data2.cab" is displayed. I tried to give the path of the driver (I have Vista), but it did not work.

  I need help please!

  Hi Aynalm,

  You can check the following link and try to download display Utility for Windows 7 drivers, and check if it helps.

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/modelContent.jsp?CT=DL&OS=&category=&MOID=2336263&RPN=PSLB9U&modelFilter=L300-EZ1521&selCategory=2756709&selFamily=1073768667

  Also check out the link:

  Update drivers: recommended links

  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

• Satellite Pro L300 - cursor black screen flashing

  Hi all

  I have a Toshiba laptop Satellite Pro L300 Vista.

  The customer earned him in because when it starts it goes to home Toshiba screen then goes to a black screen with cursor flashing at the top left. I connected external monitor with the same result. Swapped RAM as well.

  Have run Memtest (spent), Seagate HDD long test (past), Ultimate boot CD and Winternals without success.
  * F8 does not work * and no more than the resumption of the plant.

  Can enter the BIOS F2 and F12 no problems and the HARD drive is listed.

  I reinstalled Vista on CD and on reboot it goes back to blinking cursor. I tried booting from the Vista CD repair and system restore. FixBoot commands and FixMbr prompt as well as with the same result.
  I feel that it may be a corrupt CMOS sensor? It's like the OS installs correctly, but the computer loses his memory on reboot where the operating system?

  Is the battery CMOS easily accessible and removable on this model?

  Has anyone experienced these symptoms? Is - fixable at lower cost?

  Hello

  If you have clients, I guess you're a technician and hope you have a few pieces of equipment in your store.
  Have you tried to set the BIOS to default settings and check again?
  If possible try to exchange the HARD drive and test the functionality again.
  You can use laptop with Linux live CD (HARD drive not required)?

  To be honest that I think n problem t is ORGANIC and, in my opinion, the exchange of the CMOS battery is not necessary.

  Please test it with the new HARD drive and post comments.

• Satellite Pro L300 - no sound with Win7 64

  I have the laptop according to:

  [Satellite Pro L300-1AF | http://uk.computers.toshiba-europe.com/innovation/jsp/SUPPORTSECTION/discontinuedProductPage.do?PRODUCT_ID=1058007&DISC _topSpeed = 1 & service = UK]

  I installed Win7 on the laptop, and now I can't get any sound. When you set the volume control, the level display changes on the operating system, so I guess everything is ok with the connections. I tried many different drivers, including the currently recommended drivers, as well as all the previous pilots (including drivers for different versions of the VICTORY, as suggested on some forums) after many hours trying to solve the problem, nothing seems to work.

  Any ideas or suggestions?

  Hello

  This means that the sound card is properly installed in Device Manager and you don t have no yellow exclamation?

  Perhaps portable speakers are silent. Simply press the combination of keys FN + ESC enable/disable sound.

• Satellite Pro L300 starts flashing led no-battery

  Hello world

  My Satellite Pro L300 stopped working suddenly: nothing terrible happened, such as fall or other accident, so I can't explain what went wrong.

  The situation is: I have the laptop with the battery inside and connected to the power cable. I press the power button and battery led 5 times with the orange light just flashes. It doesen't start, not even the fan, just stay still. Same thing if I disconnect the power cable.

  If I remove the battery it doesn't blink even led orange.

  Does anyone know what could have happened?

  Thank you very much and sorry for my bad English!

  Silvia

  Hello Silvia

  I can't say for sure, but power led flashing is typical when there is a problem with power supply and electronic power supply.

  If you cannot start the laptop with AC power only (remove battery) then you need professional help with this.
  Sorry, but I m afraid there is nothing you can do about it.