Satellite Pro L850 won't boot F2, F12, C & 0 do not work

Similar Questions

• Satellite Pro A10 won't boot up - where to get the disks

  I have a Satellite Pro A10 that currently does not start up Windows (XP) as it says

  The following file is corrupted or damaged:
  C:\windows\system32\config\system

  Tools & Utilities CD that came with my laptop has unfortunately been scratched and will not start.
  I have two system recovery disks, which are very good.

  My questions:

  1. is it possible to buy a replacement Tools & Utilities CD-Rom?
  2. If Yes, where to go?
  3. is there a way to restore my laptop without having to reinstall everything completely and lose all my files?

  Thank you

  Post edited by: Stuart_2007

  With regard to the point;

  (a) generally, it should be possible to order the CD of tools & utilities but I ask why?
  (b) you can buy the CD of the ASP in your country
  (c) the older recovery CD is supported by an expert mode. You can use this mode to choose the partition where the OS is to be installed. In this case only, this partition will be formatted.

  But look, man. You do not need to order the CD tools & utilities because on this CD, you will only find the Toshiba drivers can be downloaded from the Toshiba page too.

• Satellite Pro L850 - 1 KM-boot problem

  Hello

  I recently bought a toshiba laptop (model in the title), but it comes with Windows 8 (ewww) so I decided to format the hard drive (delete all hidden partitions too because I will create my own backup image later) that I did with success. However, the above was made using the tools provided by Toshiba (by pressing 0 at startup).

  Now, here's the problem. I had a Windows 7 disc which is bootable and changed the boot order in the bios so it starts from the CD, USB, network HARD drive. For some reason, the laptop does not recognize the media bootable (CD/USB) and instead comes up with a message "media!: [Fail]". " I even downloaded the ultimate Boot disk to see if that starts, but I get the same message.

  What I am doing wrong?

  PS: I do not have the recovery disks and now I am unable to access the disc utilities by pressing 0 at the start as I wiped the hard drive clean.

  I put t know what you're doing wrong.
  You use the original installation disk Microsoft (Win7)?

  Set the BIOS to the default settings, start Notepad and press F12 to get into the boot menu. When the menu is displayed on the screen put this Win7 disc into the optical disc drive, in the menu, choose the CD/DVD drive and press ENTER.

  What happens when you do this?

  By the way: you have created a recovery media until you killed the factory settings?

• Satellite Pro L10 won't boot to the top

  I am a L10 for a friend, at the moment when the cd and turn it on, the snoring of fan upward, the disk hard led flashes several times climb the towers, but nothing beyond what is happening. The display shows life, no beeps comes off it is just here doing nothing with the power light on and whirring of the fan.

  So far I tried to connect a monitor to the vga no signal of the port. Put a linux boot cd in the drive, it runs and sounds like its access but I don't think that his startup, the screen is certainly not, and the hard drive is silent. Finally I tried to take the battery out and running of the network. It doesn't change anything.

  So for the moment I can not any diagnosis and I have no idea what could be wrong with him, anyone have any ideas?

  Hello

  As you have described it of very difficult to say what's wrong.
  It seems like it might really be something wrong with the hardware because you can not see the home screen Toshiba at the beginning of the initialization.

  I put t don't know if this helps but try to remove the battery to form several times unplug and wait 30 min power (can t tell the time exactly) try to reinsert the battery and connect to the mains. Try to start again.

  If it doesn't help I guess you will need additional assistance of a technician.

• After the memory was updated by Satellite Pro M won't boot to the top

  I bought 2x512mb ram 1024 MB but if I put a stick in slot 2, in that my laptop will not start Windows (the bios boot and restart)
  memtest gives errors, I tried other sticks.
  they work, but if I put them in the 2 slot they give an error
  (is my slot is broken if so, how is it possible I've ever used and I know how to place the memory)
  the first time, I placed the memory I started with memory, it worked fine (I ran a memtest for about 30 minutes (everything was ok), I went and started my laptop again later.)

  I ran the memtest and there were errors

  In my opinion, you are trying to use incompatible RAM modules.
  Please use the RAM modules recommended by Toshiba

• Satellite Pro A10 won't boot to the top

  I really hope someone can help, my laptop suddenly stops. Since he stopped, I can't charge the laptop in any mode including safe mode. It happens on the screen as much as windows xp with the bar running along the bottom, but that's.

  in safe mode simply load the drivers and then simply do nothing

  any help would be appreciated as long as it's not yet my laptop

  Hello

  It is possible that the HARD disk you are using has bad sectors. You can check this with different tools. I can recommend HDD regenerator. You can also try PowerMax 4.23.

  Google around and you'll find useful info a lot on this topic.

• Satellite Pro S300-11Y - downgrade from Windows XP Home edition does not work

  Hello

  I have a SAT PRO S300-11 since January 2009. It came with CD to downgrade to Windows XP, and I did several times over the years without any problem. But now I do and what finish to downgrade, when done last reset, windows starts to have problems and doesn t work.

  But if I do not the last reset on arrival of the downgrade the machine works perfectly, but when I do reboot then when windows starts it works. I try 5 times and still the same. I come back to windows original vista (I did CD to do) and it happens the same problem.

  Any help greatly appreciated,
  Thank you and sorry for my bad English.,.

  Jordi

  My English is not so perfect, but to be honest, I don't understand you.
  Do you mean by reset? Do you mean, finally, restart?

  By default the BIOS settings and try to reinstall Windows XP Home edition recovery image.

• Satellite Pro L850-1NR - dualboot Win7 / Win8

  Hello world

  I use my L850 - 1NR Satellite Pro for the school. I go to a technical school for information technology, and we use windows 8. The problem is that * Windows 7 preinstalled * on my laptop and home, each PC works with Windows 7.

  When you buy a Satellite Pro L850 1NR, you get two * installation Windows 8 CD *, if I want to make one * dualboot Windows 7 and Windows 8 *. I know how to create a new volume on my hard drive, but when I run the first disc, the only option is to remove Windows 7 and install Windows 8.

  Is it possible to dualboot this and if it is possible, what should I do?  :|

  Hello

  Windows 7 is pre-installed on your laptop. 8 win was provided on DVD discs.

  In both cases; Win 7 and Win 8 is part of the image of Toshiba.
  Toshiba is a package containing all the drivers, tools and utilities.

  It s is not possible to keep the Win 7 on the HARD drive and install 8 additional to win using the recovery disk provided.
  Why? Because this isn't clean system Win 8, but as mentioned; his image.

  But in general, its possible to have a system dual boot (8 Win and Win 7). The start menu will be created that will allow you to choose between Win 7 and Win 8 OS.

  You will need to create simply new partition in Win 7 system.
  Then, you must start the MS Win 8 disk clean and could install the 8 Win on the new created partition.

• Satellite Pro L850-1DT impossible to install Win 7 driver wireless

  Please, I beg you.

  On costs to install Windows 7 64 bit downloaded all drivers wireless I can find on the site of tosh.
  No work.

  Find in this page http://www.toshiba.co.uk/discontinued-products/satellite-pro-l850-1dt/ ended
  Says spec card Atheros.

  Try reinstalling the driver atheros, it gets a little then disappears and nothing happens.
  Tried the driver atheros here too, but moved, but no functionality.

  At one point, I tried the function and F12 key on and outside, that seemed to allow some stuff of bluetooth and wireless.
  I have "Network controller" and "Unknown device" in Device Manager with yellow exclamation points.

  Heeeeellp please.

  You're right, it seems that the laptop Satellite L850-1DT was equipped with the Atheros WLan card and the Atheros WLan driver should be right.
  This Atheros card also supports Bluetooth function and what an additional driver must be installed for both WLan + BT working.
  First you must install Atheros WLan driver suite by packet filter for driver Atheros BT and battery Toshiba BT.

  Of course, all other tools like value added Package for Windows 64-bit must be installed too!

  I hope this helps.

  By the way: driver can be found on the page of the Toshiba UE driver
  http://www.Toshiba.EU/innovation/download_drivers_bios.jsp?service=EU
  Here you choose the Satellite Pro L850 PSKDHE

• Satellite Pro L850-1 p 7 - wireless LAN problems

  I recently bought a L850 Pro Satellite 1 p 7 and led to a new installation on Windows 7 (64-bit)

  After the new installation, I manually installed the driver for the network card, I then shot all windows updates.

  In Device Manager, I noticed that it lacks a few downloaded drivers so a load of drivers who have resolved most of the issues.

  I don't have one that is still yellow, it's for network controller.

  My one question is with wireless network.

  I tried to install several drivers, but cannot get the wireless network card to show in the settings of the card.

  I can see a bit of reading I have a wireless / Atheros Bluetooth combo.

  Reading some other threads that I downloaded the value added package, the package of Atheros Bluetooth and Bluetooth stack filter. After that I turn on Bluetooth with F12 function key, it warns me about issues with Bluetooth and wireless on at the same time.

  I also noticed that windows tells me there is a problem with the Bluetooth software and am trying to get download and install driver_bluetooth_TC00131900C

  This does not seem to fix anything.

  Has anyone else had this problem and the fix is? I really need to get my wireless working...

  See you soon
  Dave

  Hello

  You are right, that the Satellite Pro L850-1 p 7 was equipped with the WLan ATHEROS 802.11 A/G/N WB222 card, which also supports Bluetooth.

  > Reading some other threads that I downloaded the value added package, the package of Atheros Bluetooth and Bluetooth stack filter.
  It is almost correct. But you forgot to install the Atheros WLan driver.
  You must first install the Atheros WLan driver then the filter package Atheros Bluetooth and battery Bluetooth.

  This should be the key ;)

• Satellite Pro L850-1 p 8 PSKG7E - unable to see BT devices

  Hello
  I have a Satellite Pro L850-1 p 8 PSKG7E-00C002EN. Initially, I had a problem with the software, acknowledging the equipment. Resolved by reinstalling the filter of Atheros driver. Now all it works and the latest drivers are installed.
  I have a phone, a Nexus 7, a car and Panel PV all see each other by using their BT, which go hand in hand.

  Application via bluetooth which worked on a previous works Tosh Satellite Pro links table of PV in a PC-based.

  The laptop refuses to see devices nevertheless say that it works correctly and all other devices are visible to the other.

  BT RFBUS Toshiba 8.0.2005.0
  BT RFCOMM Toshiba 8.0.1129.0
  BT RFHID Toshiba 8.0.830.0
  BT RFUSB controller Toshiba 8.0.2005.0 14

  As far as I can see there is no entry of BT in the BIOS.
  I tried the FN F8 in both States.

  Can someone give me advice?

  When you use BT on your laptop, it is important to activate the BT module correctly. I guess it works with FN + F8. When the BT is Manager of BT should start and in the taskbar, you should see a blue symbol BT.

  When you turn on the BT don't boot manager or not? Click on this symbol with the right mouse button and choose the option Add a new connection. Scan the area and hope that your device should be found (enable visible modus).

  You are right about the BIOS. There is nothing related to the features of BT.

• Satellite Pro L850 - keyboard / touchpad does not work

  Hi all!
  I just bought new Satellite Pro L850 with windows 7 64 bit on a recovery partition.
  I have a big problem of internal cause keybord does not work under windows. In the bios, I can do anything I want. But the first configuration of windows (I can not deal with same user name and the name of the computer), keyboard does not work. I own windows version (with programs toschiba - recovery partition).

  It seems that this is not a cause of hardware under the work of bios keybord problem.

  Extra I have updated the bios last version 6.50, but not noticed any changes.

  Please help me with this question, cause I don't have any idea what to do now.

  Good day and w8 for answers

  PCZ

  PS. external keybord on usb work!

  Post edited by: pcz

  The whole story seems incredible. Keyboard and new laptop does not work?
  Install the check and image recovery again if the situation is the same. If the problem persists contact your local dealer, explain the situation and ask for Exchange.

• Satellite Pro L850 - Synaptics finger scroll

  I would have preferred a finger scrolling along the right and below of the touchpad (as my old Toshiba Satellite) but this Satellite Pro L850 1MJ has two fingers to scroll in the middle of the touchpad that is counterintuitive (push up to scroll to the bottom) and more importantly means that I have to hold my hand in a position that kills my wrist.

  If I go into the settings of the mouse, I can pass various options "multi-finger" two-finger scrolling and there is a separate option "scrolls" - on / off if I check the box on I get a graphic demonstration of scrolling with a finger, but it does not actually turn on scrolling with a finger.

  Can I get a finger scrolling on this laptop? If so, how?

  'Settings' tell me I have v7.5 Synaptics TouchPad on PS/2 Port and v16.2.10.3 14 Aug 12 Synaptics pointing device

  All the responses received with gratitude, preferably before my wrist decreases!

  Elaine

  I don't know what version and settings you have but if synaptic settings on your machine it looks like this that do not use two fingers to scroll and activate the scroll option.
  Click on this option and the animation, you will see how it works.

• Satellite Pro L850 1DR - problems with Windows 7 update KB2887069

  I have problems to install the KB2887069 update.

  It seems to install OK... prompt me to restart... when I do it, says it configures... GETS to 7%, then starts rebooting... watch it configures again... up to 7 or 9%... and then reports it is defect and restoring... restarts again... and it is quite... not installed and reference to Windows Update confirms it failed.

  All the other updates I had installed today very well once I realised KB2887069 was the problem and failed to update.

  I am running Win 7 Prof Serv Pack 1 64 - bit on a Toshiba Satellite Pro L850 1DR. I use my AV Microsoft Security Essentials software.

  For now I had to hide the update... but all of the bright ideas how overcome the problem. I tried the Microsoft site, but there is still no answers who brought a solution for me.

  Thanks in anticipation!

  I googled around for KB2887069 update and it seems that you are not alone with this problem to Microsoft Update. I also found your request in the forum, Ms.

  In other words, that's not a problem of mobile by this must be resolved by Microsoft.

  I read in the MS forum on this issue and this issue is still under investigation.

• Satellite Pro L850-1DZ - wireless keeps dropping

  Hi all. Thank you for taking the time to read this. I have a Satellite Pro L850 1DZ and my wifi guard fall then plugging himself. It does this to Uni, in my old House and the new. The router was changed when I moved. It can fall so im sitting next to the wireless router and when im in another room. There is not no more wireless phones. Any ideas?

  Thank you very much
  Rhys

  Does it happen with the AC adapter plugged in, or by using only the power of dough mode?

  In which case it would only happen by using battery power mode, I recommend to change the saving parameters as shown here:
  http://APS2.toshiba-tro.de/KB0/HTD12017W0001R01.htm

  Watch wireless adapter power saving Mode settings
  Also an update of the WLan driver would be recommended.