Satellite Pro M10: compatible DVD - RW drive internal?

Similar Questions

• What are Satellite Pro 6000-compatible DVD - RW drives

  Hello

  Can someone tell me which dvd rw is compatible with the satellite pro 6000?

  Hello

  It is always difficult to find information on compatible drives due to different master / slave and c - salt settings.
  In my knowledge don Toshiba user manuals t provide such information. OK, I put t know if all don t user manual provide this, but I've found this info in my user manual.

  However. I studied a little someone suggested that the Toshiba SD-R6372 dvd recorder is compatible with Satellite Pro 6000/6100 units.
  I found this on a very popular online auctioneers ;)

• Satellite Pro M30 - compatible DVD players

  Hello

  I have a Satellite Pro M30 and the optical block has problems, recognizing most of my DVDs.
  I want to change the drive, does anyone know which are the models compatible with this machine?
  The real player is Toshiba DVD - ROM SD-R6112.

  Thank you
  Daniel

  Hello

  As far as I know this unit has DVD +-R/RW (DualDrive) and in my opinion the best solution is to swap it with the same. On this way, you will be sure that everything works correctly.

  Unfortunately, there is no public document on the hardware upgrade and just Toshiba service partners can tell you more about it.

  Good bye

• Satellite Pro P100 - replacing the HARD drive internal

  I have a Satellite Pro P100 with a concert of 60 internal HDD and would like to replace this with a 250 or 320 GB drive.

  Anyone can suggest a way to imagery of the current drive and copy this back to the new drive without having to re - install the operating system and other installed software?

  I have a couple of USB 2.0 external drives with sufficient capacity.

  Hello

  You first need to know if the more drive HARD 250 GB or 320 GB would be compatible and if the BIOS recognize this HARD drive without major worries!
  The problem is that not all HARD drive sizes are supported by the BIOS.
  Then all first check if the new HARD drive are supported!

  You ask how to get all the files on the new disk? I recommend good reinstall the OS from the recovery CD. It would be to reinstall the OS, drivers, tools, utilities.
  If you have other files such as mp3, etc it then backup to the external USB HDD.
  Then you could connect this HARD drive to the laptop and could transfer it on the internal HARD disk.

  Greetings

• Satellite Pro M10 - the (original) display driver upgrade?

  Hello

  is it possible to upgrade my display driver on my laptop M10 with the original driver? I'm using the latest drivers nVidia Toshiba (36,48) but NVIDEA has already more recent upgrades, but it will not recognize the my graphic card and refer to the use of Toshiba drivers.

  Any way to install the original NVIDIA driver instead of the Toshiba driver?

  Thanks for the help
  Andreas

  Hello Andreas

  I put really don't know if it is possible to install the original NVIDIA driver but it is recommended to use the driver provided by Toshiba. The reason is very simple. This kind of restriction is done to save the cell damage equipment. As you know the cooling of the hardware components is not so easy and.

  Because of this, he cannot allow that this graphics card works with maximum power. In this case, it produces a lot of heat and it may happen that the card may be damaged or the laptop turns off due to overheating. If there is a message that the card is not there it's just a mechanism of protection, and there is no way that the hardware may be damaged. Believe me the repair costs are very high.

  Good luck!

• Satellite Pro M10: Can I use burner DVD SD-R6472?

  I have a Satellite Pro M10 GR / / model PS630E-G207W-GR. I want to put in a DVD burner. Can I use the slimline burner DVD SD - 6472 R Toshiba?

  Thanks for the quick reply

  Herbert

  Hello

  Unfortunately I have not found any information that would confirm that this drive is compatible.
  But I found this Slim SelectBay DVD Multi drive: PA3231E-1DV1

  This site of Toshiba products:
  e http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/options_and_accessories_search_by_model.jsp?servic = 1 = us & selSeries & selFamily = 2327 & SelCategorie = 2319 & family = 2327 & product = 69238 selP

  However, if you want to order that a 100% compatible and taken in charge by car then please request the Toshiba service in your country. There, you can order the CD.

• HARD drive external for Satellite Pro M10

  Hello!!

  I would buy an external USB HDD to my computer, but I don't know if I can buy anyone. USB 2.0 is not, but I think that only touch the speed of transfer, no?

  BIOS version 1.50

  I find this HARD disk, it'll work?

  http://www.Maxtor.com/portal/site/Maxtor/MenuItem.6adb6b8313633595062e6be791346068/?channelpath=/en_US/products/external%20Storage/Maxtor%20Basics%20Family

  Thnx

  Hello

  Satellite Pro M10 certainly has USB 2.0 ports, firewire, and IrDA interface. The operating system uses a standard USB Windows driver.
  I put t see any problems with the use of the external USB HDD.
  It should work.
  But in my opinion, you should buy an external USB HDD that supports an IrDA interface. It s much faster as a USB connection.

  However, the operating system must be able to handle the 250 GB external HARD drive

• Need help to install the new hard drive in Satellite Pro M10

  Hi all

  My hard drive died in my M10 Pro Satellite so I decided to adapt to another.
  It fits very well in the caddy, but just does not want to slot into place correctly as something seems to be stopped.
  The M10 only accepts a certain brand/model?
  Also, nobody knows this as the largest capacity M10 will accept?
  Thank you very much.

  Concerning
  J

  As much as I know should not be problem at all. Take the old and the new HARD drive and compare the connectors. I hope that they are the same. I can only imagine that the new HD is not placed correctly in the HARD drive bracket. Make sure that the new is placed as an old man after his retirement from the laptop.

  As for max capacity of HARD drive, there is no precise information and we can only speculate on this. Try to use the search option on this forum. Maybe someone already talked to upgrade the HDD on Sam/Satellite Pro M10.

  The fact is that Satellite Pro comes with 30, 40 and 60 GB hard drives. How many GB does your new HARD drive?

• Need help to remove the hard drive from a Satellite Pro M10

  Hi, a good will would point me in the right direction. I am trying to remove the HD from a satellite pro M10.
  I discovered the net without success.

  A diagram with being usefully etc.

  kind regards J

  Hello

  I can't give you a diagram or something, but I can give an indication to take a look on the front left side of your machine. On this corner of the left side under the volume control is a small blanket where the HARD drive is in. You need only to unscrew the 2 screws that are accessible when you turn on your machine and and look at the bottom of your machine. Do you know what I mean?

  When you remove these 2 screws, you need to remove the HARD drive by taking some screwdriver flat-blade and paste between the disc cover and HARD case. Then carefully remove the cover of the HARD drive and you can recover the HARD drive with the cover and exchange it.

  Voila, your hard drive West. It s is not difficult at all.

  But if you still have some questions then request.

  Welcome them

• Need driver modem for Satellite Pro M10

  Hello

  are there drivers for the modem in Satellite Pro M10
  of the original CD? I ve lost the original CD and when I
  install the drivers of "eu.computers.toshiba" - Europe.com
  (new version), I can't connect to one of the ISPS in my
  countries (cheaper :)). And before with drivers
  original CD works...
  So if someone can post drivers or give a link...
  Thank you

  Leo

  Hello

  I understand that you have lost the tools & utilties CD with all the drivers appropriate for your machine, not you?

  If you have lost it,
  You can download the current drivers for the Toshiba site or
  You can order a new oneat each partner Service Toshiba for a little money!

  Good bye

• Satellite Pro M10 - infrared does not work properly

  Hello

  I have a Satellite Pro M10 and my infrared does not work. I downloaded the zip file with the drivers from this site. Then, I uninstalled and reinstalled, but it always happens in the Device Manager under "unknown - SMC IrCC - Fast Port infrared (IR Module: HP). (with an exclamation point). When I look at the properties it says under device status:

  This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

  Click Troubleshoot to start the troubleshooter for this device.

  However, under Driver Details is said:
  C:\windows\system32\DRIVERS\smcirda.sys

  I extracted the zip file in my home directory of c:\downloads\infrared.
  whatever I do, it does not now. It worked when I bought it, but I have too many things on the system for a new installation. Which brings me to another question. Is it possible to re - install windows without losing all your data, etc.? I did it with other systems (95,98) Windows. But it seems that the Toshiba recovery disc means any wiping.

  Thanks in advance for any help.
  Chris

  Hello

  If your HARD disk contains two partitions and you have saved the data on a second you can reinstall the operating system on the first partition using recovery DVDs.

• Re: Satellite Pro M10 - strange Boot problem

  Hello.

  My Satellite Pro M10 has developed a strange problem. It will power with its installed hard drive.

  The yellow light beside of the plug symbol starts flashing. When there is no hard drive not connected, or another hard drive from another trendy laptop it starts fine?

  Please help, thanks in advance,

  Destro

  I don't know how to help you. HARD drive changes and everything will be ok.

  Is - this original hard drive that you got with your laptop?

• Satellite Pro M10 attempted to upgrade processor

  Hello

  I tried to upgrade cpu original 400 fsb 1.4 mhz centrino centrino 1.6 mhz 1 MB cache 400 fsb cache 2 MB (SL7EG), it works but only the minimum frequency (+-670 Mhz), it remains each time to the lowest frequency even if a lot of work is invited to the cpu (tried a lot of cpu stress tools).

  I really don' t know how solve this problem... can someone help me please?

  Bios version 1.50, version of the firmware 83,72, 23/05/2003 date of the bios.
  Thanks for advantage

  NB: only in documents from toshiba, the CPU seems to be fully compatible with Satellite PRO M10

  Hey Buddy,

  Just a quick question: you know that upgrading the CPU is not supported by Toshiba?
  With other words, it means that no one can tell if another CPU works correctly, and if you can use the higher speed.

  I guess if you can use t as the higher speed, the CPU is not taken in charge and that s a limitation of the card motherboard/BIOS.

• Satellite Pro M10 PS630E does not start after upgrading CPU

  I tried to install a new processor for my Toshiba Satellite Pro M10-PS630E.
  He initially has a 1500, I tried to put a 1766.

  I follow the maintenance manual, later the computer change is not star upward.
  When I connet to power it show that the luminous power of orange/amber color and make 5 flashes, then 3 and then restart blinking.

  My question is "is it posible to do a reset of the bios parametrers" or "reset the CMOS?
  Is it possible to get it working again.

  Hello

  The flashing light means that it has detected a hardware problem on the motherboard!
  Perhaps you have used a wrong CPU and is not compatible.

  Perhaps the BIOS does not support this processor and therefore this flashing error code appears.

  What say you can't update the BIOS! First of all, that's not possible since only focused on the victory of BIOS is available for download. You must run the Windows operating system to update the BIOS.
  Secondly the update of the BIOS won't help you with this problem!

  You must use a CPU that is fully compatible!

  Welcome them

• HDD upgrade on Satellite Pro M10

  Hello

  I want to exchange the hard drive of my Satellite Pro M10. Can someone tell me what drives can I use? On ebay, I found a disk HARD 160 GB fot this model, but in the manual they talked only about 30 GB, 40 GB or 60 GB HARD drive.

  Thanks for any help!

  Your old laptop IDE interface for the connection of HARD drive, so I think you can use max 120 GB HARD drive.
  It should be enough for this oldie? Do you agree with me?