Satellite Pro M40X - can not read MMC - SD card more than 1 GB

Similar Questions

• Satellite Pro M40X does not work with battery

  Hello

  I have toshiba satellite pro m40x laptop. It haves apromaly 11 months.
  In recent weeks, the laptop does not work with the battery.
  With the battery and the power running, if I turn on the laptop, it turns off after 10 seconds. If I only turn the computer batteries, laptop not respons.
  The laptop works without battery.

  I have rma is not the portable and the technical suport fixed the battery because it only 6 months guarantee.

  I'm sure that battery modules were not upset because I used the battery not very often.
  I disassemble and I wached the control circuit. I'm sure that something of them, it was broken, but I can't fix it without the schema.

  Another question is if I can change the graphics card to laptop. Is actually a x600se but I need power more graphic

  I hope you can help me

  gretings

  Hello

  It is not easy to say what the problem is here. Have you noticed something strange with LED power control? It is also possible that the electronic power supply do troubled. Try to talk with authorized Toshiba and explain the situation. If you open only one Notepad, uneducated, it may be simply worse.

  Graphics card cannot be updated as on desktop computers. I put t know how it is on this model laptop but the graphics card is fixed on the motherboard and cannot be traded.

• Satellite Pro M70 can't read 4 GB SD card

  I have a laptop Toshiba Satellite Pro M70 PSM76E and a 4 GB SD card. The laptop can not read the card. How can I do to work properly?

  Problem is that older models of laptops have problem reading last SD cards with a capacity still more and more. In my opinion it has not much to do. Maybe you can try to install the driver for some newer model laptop SD card reader. Perhaps driver for A100.
  I have too many M70, but I don't use SD cards. I prefer that USB keys because there is no any type of restriction.

  Good bye

• Re: Satellite A200-1N7 does not read the SDHC card using Win 7 32 bit

  Hi all

  After that I installed windows 7 32 bit on my laptop, it does not read my sdhc card.
  And he did it when I got Vista.

  Can someone help what to do?

  Thank you very much:

  Adry

  Hello

  Have you installed the driver for the card reader?
  Have you noticed an unknown device in Device Manager?

  Please see the page of European disk from Toshiba for the card reader driver.
  Satellite A200-1N7 belongs to the PSAE3E series
  I found the driver of the card reader for Vista 64-bit
  Usually the Vista driver should work on Win 7 OS too

  If this does not work, then try the drivers released for A500 or L500 series!

  Welcome them

• Satellite Pro A60 do not read CD

  Satellite Pro A60 - EN, reader of CD/DVD-RW reading high. Up til now read audio CDs, DVD video & MP3. Now stopped reading CD - R that were created elsewhere, two photo/word files and now MP3 does not read. Once stopped play CD audio Middle ripping today. Restarts the computer after the error report microsoft and fact then automatically have stopped ripping today.

  Laser seems clean, car not clear, no virus.

  Natrually outdated... warranty...

  Welcome pointers

  Hello

  Have you tried to remove the drive from Device Manager?
  Try this procedure. After restarting the OS should recognize the drive again.
  Maybe this will solve the problem.

  Good bye

• Satellite Pro M70 does not read the DVD of some manufacturers

  Recently, my Satellite Pro M70 stopped reading some DVDs, specifically verbatim...
  When I put in, it is just to see any disk. If I put the same disk into any other computer, even my friends Toshiba Satellite Pro M70 - than mine, even it reads normally.

  Any ideas?

  WEIRD laser could be at fault, or it is maybe dirty. Try to clean the lens with a Microfiber cloth.

• Satellite Pro A300 can not find USB devices

  Hello forum,.

  We have a customer who bought a Toshiba Satellite Pro A300 with us, but he gets a strange mistake about it.
  It connects to a hub 5port Sandberg USB 2.0 to one of the usb ports, the pc detects the hub, but when it connects a /Memory stick to the hub, nothing happens.
  the hub and the memory stick works on other PCs.

  I hope someone can help.

  Best regards

  John Bork
  DANBIT A/S

  Hello

  What happens if you connect the memory stick directly without this USB hub?
  I also had a USB hub, but these hubs are a little complicated and delicate USB specification allows a certain power and according to the devices that connect, you need to use an active USB hub, that means with external power supply.

  But normally, Satellite Pro A300 should have enough USB ports if it of needed, I would recommend a USB hub with 2 or 3 maximum ports

• can not read files is mod more

  Hello

  "I think that ' since I upgraded to final cut pro and the new OSX, I can't read my files is a mod for all older projects that I've done.

  I connect etc, fcp detects files, the film is always black with no sound. How can it be resolved?

  Thank you and best regards. Kristof

  Had to look at this mod to the top: old mechanical Stoppers video consumer or Amiga file extension. You will probably need to find some obscure App video conversion that Final Cut Pro X has been out for five years. Earlier, you started using it?

  An article of the wiki:

  The first version of the format was created by Karsten Obarski for use in the Ultimate Soundtracker; Tracker software available for the Amiga computer in 1987. ^{[1] [2]} the format has since been supported by hundreds of playback programs and dozens of other trackers.

  The original version of the MOD format featured four channels of simultaneous audio playback, corresponding to the capabilities of the original Amiga chipset, and up to 15 instruments.

  Later variations of the format have extended up to 32 channels and 31 instruments.

  The format has been designed to be directly playable on the Amiga without additional processing: for example, samples are stored in 8-bit PCM format ready to be played on the Amiga DACs, and given on the profiles are not packed. Reading required very little time CPU on an Amiga, and many games used MOD files for their background music.

  Is wrong, is that the magic number "M.K." in the offset 0 x 438 of MOD files are the initials of Mahoney and Kaktus, two prominent Amiga most in time, who played an important role in the popularity of the format. They actually represent the initials of Michael Kleps alias unknown / DOC, another developer of the format. ^[3]

• Satellite Pro A60: Can I put the graphics card ATI Radeon 7000

  I have an A60 Satellite with the Mobility Radeon 7000 Graphics Pro. I play world of Warcraft, but it won't work on the laptop, because this graphical configuration is not supported. Is is possible to upgrade to a better?

  I was told that it is not possible because the chip is attached to the motherboard.

  Or Nick

  Unfortunately, the graphics card laptop cannot be upgraded. It is simply not possible due to the architecture of the laptop. Laptops are just different and you should know that only a few parts such as the memory or HARD drive are extensible.

  You can try to use a card external chart like this for example:
  http://www.Engadget.com/2006/07/28/ATI-to-release-power-hungry-external-video-card/

  But I m not sure if it s really an option.

• Satellite A40-SP151: can not make ethernet work card

  Hello

  I went and stupidly installed new XP on my Satellite A40 and I can't do the ethernet card working (just Windows will not recognize it).
  I tried MANY solutions (even some of this site) and the drivers and the problem is still there.

  If someone could please tell me exactly what drivers work and where to get them, I'll give you literally infinite gratitude.

  Thanx

  Hey Buddy

  To be honest, the Satellite A40-SP151 is unclear for me but as far as I know many portable Satellite A40 (series PSA40E) use the Intel LAN card.

  Have you tried installing the Intel LAN driver v 8.0.43.0 of the European driver Toshiba page?

  You can find the drivers Sat A40 Archive on the European driver page.

  You can choose:
  Archive Series-> Satellite A40-> PSA40E-> Satellite-> Satellite

  Big names

• iMac can not read the Sony card with card reader

  Whenever I try to read the connection via the USB port on the card using a Sony memory card reader I get the following error: the disk you inserted was not readable by this computer. If I plug the device via USB, I can read the card. Do I need a special card reader to read a Sony card?

  It is possible that you are using an old map player that maybe isn't compatible with the new card. The SD card has evolved over the years, and if you try to use a new card with a former card reader, you can get this kind of message.

• Satellite Pro M40X does not ILLUMINATE

  Hi. -.

  I have a M40X Pro Satellite that I bought 4 years ago. It works well until a few weeks ago.

  I tried to turn it on but nothing happen, nothing, no lights, no sound at all, completely dead.

  It is connected to the power supply and the power light is on, (the battery light does not work since there is a lot of time). I tried to remove the battery, unplug the power cable and after several hours or even days, try to turn it on and I got the same behavior.

  Only power if it is (the power light when you connect the AC power) but when I press the button "turn on" the laptop, nothing happens.

  My laptop isn't under warranty, so if someone could help find a solution that would be great!

  Thank you

  Hello

  I have read your problem related to the failure of hardware. It seems that the motherboard is dead, no doubt, the southbridge. In any case, you should contact the service center:

  http://EU.computers.Toshiba-Europe.com/innovation/generic/ASP_SUPPORT/

  Note that the motherboard is one of the most expensive parts of the tower and don't know if it's worthy to replace, it is better to buy a used or a new laptop.

• Satellite Pro P100 can not get the screen to work again

  If someone could point me in the right direction, I would be very grateful!

  I bought a monitor to use when I am in the office (it's a LG Flatron L225WT), installed the software that came with it and plugged. Nothing seemed to happen, then in Toshiba HWSetup, I changed my power on the screen 'LCD + Analog RGB'.

  To cut a long story short, the external screen works perfectly now, but I cannot access the internal screen, even after changing the power supply on the display to 'Automatic Selection '. The Fn + F5 key does not appear to have any effect at all.

  I must have inadvertently done something to mess up the computer. Can anyone suggest how I could reset it back?

  TIA to all who can help you!

  -Laurence

  I put t know what laptop you have and don t know what OS you are using, but it seems that you have managed to set the external monitor as the main screen.
  You should change in display properties (right click on desktop-> properties)

  Somewhere in the settings, you should try to score the internal display (1) and should mark use this device as the primary monitor

  You won't find any similar settings or this will not help then set the operating system to the point of time at the beginning. In this case all settings will be reset!

• Satellite Pro has - can not control the brightness level

  I can't control the brightness level of the screen of my laptop! When I opened (Panel\Hardware and Sound\Power Options control) I can't find!

  Hello

  Usually, you can change the brightness of the display by using the FN + F6/F7 key combination.

  It works for you?

• Satellite Pro M30 - can I change the video card?

  Is it possible to upgrade the video card for M30?

  Also noticed lately that the cooler starts roaring Java =. =' can it be connected to my (now defunct) video card or I just better clean the cooler?

  Hello!

  The video card can't be updated because it s soldered onto the motherboard.
  Here is a document Toshiba upgrade the CPU and the GPU:
  http://APS2.toshiba-tro.de/KB0/TSB9401AX0001R01.htm

  But why you want to upgrade the video card?
  However, you clean your laptop if you use the jet of compressed air. This could blow out the dust from the cooling fans.

  Good bye