Message screen of Windows 7... NO REAL?
I have a note at the bottom right of my screen saver that says "Windows 7 - Build 7601 - this copy of Windows is not genuine"... WHY?
I suggest that you run the diagnostic tool Microsoft Genuine Advantage in normal mode and copy and paste the results into a response for further analysis:
http://go.Microsoft.com/fwlink/?LinkId=52012
Run the tool and when it ends, click the copy button, open a text such as Word or Notepad file and select Edit, paste. You can paste directly into an answer here. Open a response, right click and select Paste.
Tags: Windows
Similar Questions
-
Blue screen Windows Setup hanging from the message "Setup starts Windows.
I have a M2n SLI chipset and my computer came stock with vista 64-bit, after losing all the functions of the operating system because of a problem of .net I have tried to restore without result. I got down to the wire with whiping the drive and now I am trying install Windows XP Pro Service Pack 1 (old drive, still trying to see if an operating system takes in general). The BIOS Setup to boot from the disk, I get the blue screen of installation of Windows to pop - up and start installing its drivers. However once he reaches the message 'Setup starts Windows', the screen freezes it for as long as I'm ready to watch it (left for a long period of time and no difference).
Other cases that I also noticed when I restart my computer it will not even reach the configuration screen rather right at the point where you could normally see "Press any key to boot from CD" I received a message 'FreeDOS' and it hangs there.
I'm not experienced with computers at all I'm just regurgitating given to me by my roommate who happens to know more information. I hope this isn't a hardware problem as I firmly doubt replacements will be economically feasible for me. Any help would be greatly appreciated. Thank you.
Hi scottycms,
See the link that provides information on the reasons below the slot problem and the resolution for the same: Windows XP does not meet the "Setup is starting Windows XP" Message: http://support.microsoft.com/kb/310760
With regard to:
Samhrutha G S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
I just got a message at the bottom right of my screen saying Windows 7 Build 7601 this copy of windows is not genuine, BUT IT IS.
I recently got a HDD replacement because there was a problem with my other HDD that was 1 month ago.now, I have this message at the bottom right and I don't have a copy of counterfeit Windows.can someone help me solve this problem?Have you tried to restart by phone?
How to activate Windows 7 manually (activate by phone)
1) click Start and in the search for box type: slui.exe 4
(2) press the ENTER"" key.
(3) select your "country" in the list.
(4) choose the option "activate phone".
(5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
(6) explain your problem clearly to the support person.
http://support.Microsoft.com/kb/950929/en-usPlease run the Microsoft Genuine Diagnostics Tool then copy and paste the results into an answer here for further analysis:
http://go.Microsoft.com/fwlink/?LinkId=52012 -
Black screen with windows to return to the scroll bar - Qosmio G30
Hello
I was wondering if someone can help me. I have a Qosmio G30-161 and I encounter a few problems with it right now, every time I close the top of the laptop and leave it for about half an hour that I reopen the form and I get a black screen with a running scroll bar downstairs with the message saying "Resuming Windows to troubleshoot with windows press anyone." I let the scroll bar run its course and it goes back to the screen where it was before I close the lid. Can someone help me this is driving me crazy having to wait for the roll bar all the time, it has only recently begun.
I also have a problem concerning the closing of windows Explorer. Whenever I do this I get an error message "Error 217", this all started when I installed Norton Anti virus, I uninstalled this product and the problem resolved, I reinstalled norton and the problem came back.
Anyway to solve this problem.
Thank you very much.
First of all can you explain to me what should happen when you close the lid of the display?
In the settings of power at the moment is chosen the track option: when I close the lid to HIBERNATE. Please check this option on the tab stock setup and choose your preferred option.
I have no explanation for this Norton related issue. If Norton brand issues I recommend you to use other (better ;)) software.
Good bye
-
Lately when I turn on my computer, I get a message saying. "Windows mail can compact the message store. This can take up to a few minutes. "It looks like a real message of Windows but when I click on the link"Get help from communities", it does not work. I cancel or close the message, because I fear that the message can be fake and won't open my computer for a virus or worse. Anyone has any info on this particular message? I can't find anything in the help section of Windows. Thank you.
original title: compaction of the database messages
Hi Kathy,
Please click on the orange button at the top of this page that will help you find the right forum for your problem in ads.
Mike
-
FLTMGR. SYS blue screen during Windows XP repair
So my secondary computer has had problems starting lately. And when he did start, it was only a matter of time before it would BSOD on a machine_check_exception. In the last two days that there so bad he has finished start up at all. So I found the XP installation CD and booted from that and tried to make the repair facility. Everything seems to be okay and he said that the computer will restart and Setup will continue. He gets to the Windows XP loading splash screen, but quickly then I get BSOD with
STOP: 0X0000007E (0XC0000005, 0XF73E92B2, 0XF79C6490, 0XF79C6190)
FLTMGR. SYS - address F73E92B2 base at F73D1000, DateStamp 480251daWhen I try to reboot from the CD, he wants to start the installation process
and when I try to restart in safe mode, I get a message that says: "Windows XP Setup cannot run in safe mode. The installation program will restart now. »
Hello
I was going through discussions and saw that it had not received a response.
Let's start by running chkdsk from the recovery console.
Instructions on the entry for the recovery console is located at the following link:
http://support.Microsoft.com/kb/314058
While we are at the command prompt, type the following command followed by the Enter key:
CHKDSK C:/p
Allow to run chkdsk, and note that it can take some time.
Try to restart it in normal mode when chkdsk is finished.
Best regards
Matthew_Ha
-
I came back to a blue screen (this is the 3rd time) in the last 2 days. the message read:
A problem has been detected and windows has shut down to prevent damage to your computer. KERNEL_STACK_INPAGE_ERROR. If this is the first time to see this message to restart your computer. This is my 3rd time *.
If the problem continues disable or remove any newly installed hardware or software * how to locate these items? ***
Disable the BIOS memory options such as implementing caching or shadowing him * how I do? ***
If you need to use safe mode to remove or disable components, restart the computer, pressF8 to select advanced startup options, and then select Safe mode. I did not follow the previous process again simply because I don't know how.
However, when I type ctrl/alt/delete message closed and I restarted my laptop. When you click on Interent explore a microsoft window opened and suggested that I run Mircosoft updated. When I run the search for update (using express) I get the message: [error number: 0xC800042D] 0 x 00000077 (0xC000000E, 0x06F16000, 0x000000E, 0 x 0000000) indicating that it has encountered a problem and that he was able to complete the search for my updates that it said I had need... now what that?
Hello
1 how long have you been faced with this problem?
2 do you have you can all changes on the computer before this problem?
3. do you get the blue screen only when trying to install or verify the windows updates?I suggest you to follow the steps mentioned in the article below and let us know your progress.
You receive an error message on a Windows XP-based computer: "Stop 0 x 00000077" or "KERNEL_STACK_INPAGE_ERROR"
http://support.Microsoft.com/kb/315266
Also check out the article below.
Error message on a computer that is running the Windows operating system: "Stop 0 x 00000077 KERNEL_STACK_INPAGE_ERROR.
http://support.Microsoft.com/kb/950415You can find the installed hardware and the software on the Device Manager and control panel command respectively.
Reference:
Uninstall and reinstall devices
http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/devmgr_s3.mspx?mfr=true
How to change or remove a program in Windows XP
http://support.Microsoft.com/kb/307895 -
Hi I have windows vista basic and it worked very well until yestaday and I got a message saying windows Explorer has stopped working and when I click on restart 3 seconds later, he appears once again?
original title: Windows Vista Basic worked fine until yesterday and now I get messages saying that Windows Explorer has stopped working.HelloUse the startup clean and other methods to try to determine the cause of and eliminate
the questions.---------------------------------------------------------------
What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
on this machine, including those you have uninstalled (they leave leftovers behind which can cause
strange problems).----------------------------------------------------
Follow these steps:
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html==========================================
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
reference (if you have a small box at the bottom left - show for all users, then check that).How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlA quick check to see that load method 2 is - using MSCONFIG then put a list of
those here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out which files, key of registry and other objects processes have opened.
What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to start automatically when you start your system
and you log in. Autoruns also shows you the full list of registry and file locations where applications can
Configure auto-start settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx-Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
a program that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe not. The window
Watcher says it all, reporting of any window created by running programs, if the window
is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/===========================================
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
get new manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx===========================================
Refer to these discussions because many more excellent advice however don't forget to check your antivirus
programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
first.Problems with the overall speed of the system and performance
http://support.Microsoft.com/GP/slow_windows_performance/en-usPerformance and Maintenance Tips
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125Explorer Windows stopped working
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
Blue Screen in Windows Vista, BCCode: a
Now start the system error codes:
BCCode: a
BCP1: 00000000
BCP2: 00000002
BCP3: 00000001
BCP4: 81E3383C
OS version: 6_0_6002
Service Pack: 2_0
Product: 768_1Here are the error codes since the last start of 'good' - these are the first BSOD codes and they were different from what I mean now:
Signature of the problem
Problem event name: BlueScreen
The system version: 6.0.6002.2.2.0.768.3
Locale ID: 1033Files helping to describe the problem (some files may be is no longer available)
Mini041112 - 01.dmp
SysData. XML
Version.txtSee a temporary copy of these files
WARNING: If a virus or other security threat caused the problem, open a copy of file can harm your computer.Additional information about the problem
BCCode: 1000007e
BCP1: C0000005
BCP2: 00000000
BCP3: 8A7677E8
BCP4: 8A7674E4
OS version: 6_0_6002
Service Pack: 2_0
Product: 768_1
Information about the server: c649a906-a42d-406b-9549-6f7f54e0a9a6All you can provide diagnostic information would be useful!
1. no changes have been made on the computer before the show.
2. the PC allows me to log on, but he did not finish before she lifted the IRQL_NOT_LESS_OR_EQUAL error such as a STOP message on loading Windows Vista blue screen. Then it will allow me to start mode without failure, but only without a network. I did a system restore to what I thought, it was a good point and then for a week before the show, but nothing has changed. The problem persists. I also used advanced Startup Options (F8) and tried to get to the last good known Configuration, but the same thing happens.
I think this is material - I opened and cleaned it out, reinstall memory, Reseat the video card. I think it's time to take it!
Thanks for trying to help.
Ellen
-
error message & screen and E-mail program freezes when scanning document
Cannot attach a document scanned in windows mail, keep getting error message & screen/e-mail program freezes
Scan the document first, then compose the e-mail message and then use Insert | Piece attached or just drag the file on top of the message to attach it. In addition, if the file is very important, that it will take time to treat it because it must be coded to check the size of the file.
Steve
-
crash blue screen of Windows 8
I've updated to windows 8.1 and realized that the games run slowly on it. Then I updated my software drivers so I spent again to windows 8. But when I did that my laptop started to crash at a random moment when I was playing a full screengame or watch a vid on youtube full screen it hangs and said if you want more search information for driver iqrl not less or equal.
I would apreiciate if someone wants to help me.
-Devil
Hello
Thanks for posting your question in the Microsoft Community.
The DRIVER_IRQL_NOT_LESS_OR_EQUAL error usually occurs after the installation of the faulty device driver or service system, BIOS.
If you encounter a bug 0xA control during the upgrade to a later version of Windows, this error can be caused by a device driver, system service, an anti-virus or a backup tool that is not compatible with the new version.
To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:
Did you just install a new program or a piece of hardware, update a driver, install an update, etc. ?
You get the error message? Please provide the exact error message / error code.
I suggest you try using the methods below and check if it can help solve the problem.
Method 1: Run the Safe Mode and perform a clean boot
Step 1: Safe Mode. Safe mode is a troubleshooting mode that starts Windows with a minimal set of drivers and services. Start your operating system in this way and see if the problem appears.
Start the computer in safe mode with network and check if the problem persists. Follow these steps to start the computer in safe mode.
Click on the link and follow the steps in Start parameters of Windows (including safe mode)
http://Windows.Microsoft.com/en-in/Windows-8/Windows-startup-settings-including-safe-mode
If the problem does not exist in safe mode, try to perform a clean boot and check.
Step 2: Perform the clean boot.
Reference: How to perform a clean boot in Windows
http://support.Microsoft.com/kb/929135
Note: After troubleshooting, consult this section «How to reset the computer to start normally after a boot minimum troubleshooting»
If the problem persists I suggest you follow method 2
Method 2:
Resolution of errors blue screen in Windows
Reference: http://Windows.Microsoft.com/en-us/Windows-8/resolve-Windows-blue-screen-errors
IMPORTANT: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.
Also check your installed programs. If you see something that you have not installed and is not part of Windows, use the Remove Programs option.
Hope this information is useful. Please let us know if you need help with Windows.
Thank you
-
Blue screen of Windows 8 with various errors
I want to HP dv6 provided with Microsoft 8 on it (it's only a year today)
The problems that I encountered:
-L' computer would freeze with a screen colorful weird pixelated
-L' computer freezes while attending a bsod (you could tell because the screen would be the light blue color, but would not have error codes or restart)
-L' computer would go to a bsod with an almost different error code every time (sometimes I couldn't write before it will re-start)
-system_thread_exception_not_handled (dxgmml.sys) or (dxgkrnl.sys)
-"KMODE_EXCEPTION_NOT_HANDLED"
-page_fault_in_nonpaged_area (ntfs.sys) (it's the one I see most often)
-memory_management
-IRQL_not_less_or_equal
-kernel_security_check_failure
-driver_overrun_stack_buffer
All these problems have occurred during various tasks, never the same as the one
- And now I can't even on the computer because as soon as I turn it on it tries to auto repair, but fails. It then takes me to the boot menu where I tried all options, without success.
I don't have any sort of installation dvd or windows dvd backup.
I do not know what I did to make this crazy computer, but please help me to make happy again because I have no money against hepatitis a for professional help not to mention a new computer.
OT: Computer Hp Windows 8 / I don't know what the problem is or how to fix it.
Hello
Blue screen (sometimes referred to as errors or errors of STOP code black screen) errors occur if a serious problem, windows to shut down or restart unexpectedly. You might see a message that says: "Windows was arrested to avoid damaging your computer."
I suggest you try the steps from the following link:
Resolution of errors blue screen in Windows
http://Windows.Microsoft.com/en-CA/Windows-8/resolve-Windows-blue-screen-errorsAlso check if there are errors listed in Event Viewer.
Event logs are special files events important folders on your computer, for example when a user connects to the computer or when a program encounters an error.
To open the journals please follow the steps.
Press the Windows key + W
Type 'view event logs"on the splash screen and press enter.I hope this helps. Let us know if you have other problems with Windows in the future.
-
Q9h freezes at the screen of Windows mobile
After loading front portable Book slowed down. I have one installed FB even boredom. I go into programs and mailwatcher.exe is always on as well as 3 or 4 others, in any case the phone does not start no further than the windows mobile screen. I did a restet and a clear before that.
So for you ensure that I understand, when you start the phone that he never took the start screen for Windows Mobile... is that correct? I'm lost on how you managed to get to the task manager then? Anyway, if you're stuck in fact at the start screen, I would try to make a forced Clear/reset the keyboard at startup... but I warn, this will reset the device back to the State wherever it was when you took it first in its packaging.
To make the keyboard master reset/clear, turn the unit off then hold down ONLY the E and Z. Hold these keys down and press and release the power button to start the device (always ONLY the E and Z keys) to start. After a while, you should see a message on the screen that the device is reset. From there on, it should start back up and you will need to reinstall all your applications and data.
I hope that solves your problem!
-
On Win 7 after update itunes Error Message error 7 (Windows error 127) whenever I have start download iTunes
HI MikeGeorgen,
I understand that you have updated iTunes on your Windows 7 computer, but now you see an error when you try to open it. I know it's important to have iTunes working properly, so you can sync your device, so I'm happy to help you.
Make sure that you logged in as an administrator on your computer, and that you have the latest Windows updates. Then check out the additional troubleshooting steps that are listed here:
Remove and reinstall iTunes and the components of the software for Windows 7 and later versions
Thank you for using communities Support from Apple. See you soon!
-
Mail can restore a message by the window?
My wife served the former mail format of a message in a window. She is annoyed that in Yosemite, she still sees several associated messages in each window. Is there a way to get back to the older, single message, format?
Daniel,
Try Mail > Preferences... > display > ✓ "Configuration classic use.»
Maybe you are looking for
-
How can I get Firefox to allow me to use these Web sites. I am running McAfee protection and its status is Ok.
-
Re: Can foreign supply in question on my Satellite A300
Hi all I have a problem with my satellite A300, which is difficult to explain, and I have not found this problem anywhere elsewhere in the forums. I'm not a computer expert and I will try to explain the problem. When the battery is fully charged and
-
I have a compaq presario cq62 and I restarted my computer, she came back and asked to enter the password administrator or power on password? After 3 attempts failed, I got a code system off (98516903). Help, please! I can't do anything with the compu
-
OS is missing or damaged please insert a recovery key (which I don't have) any suggestions please? any suggestions please?
-
Screen frozen with no backup CD
My laptop which came loaded with Vista Home premium freaked out and closed last night. I do not remember the whole process, but I have not seen the error messages. Now, when I turn it on, it shows the beautiful picture I have as a backdrop and my cu