Satellite Pro M70-113: is the update of the Bios as of 03/06/07 supports slic tables

Similar Questions

• Satellite Pro M70-113 does not start up - it hangs at the logo screen

  Hello

  I have a toshiba satellite pro m70-113.

  Sometimes when my laptop turns off mode standby automatically, due to inactivity and then if I press a key on the keyboard to wake up nothing happens and I have no other choice but to it stop completely by pressing the button for 5 seconds.
  But when I restart it works well, that is to say, it starts very well.

  But today, when it is in a similar situation, I restarted the laptop, the screen move after the logo screen toshiba. I have the power on several times, but without success. It crashes just on screen toshiba logo.

  After a few restart I pressed ESC while restarting and the toshiba logo changed to the texts POST bios screen.
  And I found that the text will not go forward after having reached:
  Find disk 0:
  Maybe default feel HDD initialization...
  The captured image is here:
  http://img144.imageshack.us/img144/9986/image007sp2.jpg

  Note: this is a capture when, I don't know how the system has just begun works very well and can be seen that the HARD drive is detected normally this time. While the earlier version, it will not proceed after having reached "Found Disk 0:

  So, the problem is that at the time of the problem, the hard drive was not read / initialized or something like that.

  And I remember that when I tried to reboot my laptop and it did not work. It was running on battery and when I switched power supply that worked.

  So it is a problem that has been fixed in a bet to update BIOS, but for another laptop (see laufendspass post) his link on this forum is here:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=13143&MessageID=48143

  And my current bios version is 1.1 and an update is available for v1.30... (But I have not yet updated)

  Another problem I had met some time was same this post mentions to be corrected during the update of the bios.
  i.e. "corrected: a computer that is turned on to State power and running on battery power, may crash if the user is connected to the AC adapter while it is start.»

  So, for this, all mean that these problems can be solved by an update of the bios v1.30 which is available for my Satellite m70-113?

  Please answer.

  Hi Ashish,

  The fact that the initial POST process cannot access your hard disk suggests you that there is a possible problem with the drive, maybe he is not in place correctly when power is applied to it. The contents of the disc should be OK, then I suggest you take a good backup of your system (or at least your personal data) If you manage to get your notebook to boot successfully.

  I do not think that an update of the BIOS will affect any on that since the problem does not seem to have a certain 'trigger', and if the BIOS cannot access the hard disk then no matter what version of BIOS you are using.

  Kind regards

• Satellite Pro M70-113: cannot install Vista graphics driver and lines appears on the display

  Hello

  I have satellite pro m70-113 with ati x 700 graphics card.

  When I installed vista, he installed the default drivers for the x 700 'mobility radeon x 700-microsft Corp.-WDDM '.

  I've updated the display drivers for vista, that released by toshiba 2 days back... but the driver is not updated to the latest version, only the catalyst control center is installed when I ran the update of the driver of toshiba.

  The problem is that whenever I put my laptop in standby or hibernation and resume... the screen shows thin lines vertical/horizontal... and I can't use the laptop... and I have to still put the system to sleep, just to hope that it is not blocking the screen this time...

  This problem is 25% of the time only when resume...

  This problem is not resolved by the update driver for toshiba has released a few days back... as is not installs the drivers (I can't even install the drivers with the option "update drivers" of Device Manager and select file driver update from toshiba.) It says windows find new driver, but could not install the driver... Contact the manufacturer...)

  This snap shows the problem... : http://img360.imageshack.us/img360/2783/12042007366copyod1.jpg

  I updated the driver from an earlier version of catalyst, as it is downloaded from the ati site before that toshiba has released the update... this time it updates some 8. XXX version but the screen problem remains...

  Second, this update of the driver leaves me not sleep my system... the process starts for a sleep, but go back to the locked screen without making sleep ever... so I have no choice to get stuck with the default Windows... drivers having only the problem of the screen... and not the problem of sleep...

  Anyone here with a solution?

  Thank you.

  Hello

  I have Satellite M70-159 and I noticed the same thing several times. For most Vista works well but I don't remember cases in which the described problem occurs. I was just curious on M70 Vista and have had no time to intensive testing.

  Anyway, it will be interesting to know if you have already updated the BIOS to the latest version 5.10. If this is not the case to do this and watch carefully if the problem persists.

• Satellite Pro M70-113: the modem speed is too slow

  Hello

  I have a satellite pro m70-113 laptop.
  The problem is that I am not able to web surf, when you are connected to the Toshiba software modem that is integrated, because the speed is too slow.
  Connecting about 40 Kbps, but I can't even open the yahoo site just because it's very slow. I mean it seems that there is no data transfer... I have to wait 5 min load yahoo.com!
  I tried uninstalling, reinstalling the drivers, but the problem is the same...

  And on the same telephone line, when I connect to the net on my desktop, I get a decent speed. If the problem is not telephone line or my ISP, but something on my laptop hardware modem, or its drivers.

  Please can someone help me...

  Thank you, hoping for an answer...

  Hello

  Please check the maximum speed of the port and set it to the maximum level. You can find it in the properties of the modem in Device Manager.

• Satellite Pro M70-113: not possible to write on CD - R and DVD-R

  Hello

  I have a Toshiba satellite pro m70-113 laptop.
  Playback problems:
  I'm unable to read cd - r. It's really strange that a few days earlier these CD - R have been reading very well on my drive.
  and when I click on the cd drive in my computer, an error dialog box shows and says f: is not accessible, incorrect function. Here's a screenshot of the error... :
  http://img64.imageshack.us/img64/9574/1bp3.jpg

  And when I try to read my DVD-R, a few times they read very well but sometimes it does not read and the drive LED is lit when it does not read the dvd - r.
  When it reads the DVD-R, the following error message comes: screenshot here: http://img172.imageshack.us/img172/9674/2bc0.jpg

  Write problems:
  After getting reading problems, I tried to test my drive writable.
  And I found that I'm unable to write on cd - r. I used alcohol and Nero once but without success.

  Although the same content when it is burned to cd - rw, it is a success.
  I am able to burn successfully on a support DVD + RW 4 x with data amounting to close to 4.34 GB for DVD5...
  When I insert a DVD - R Virgin car doesn t detects it as a blank media and the keps LED on lighting constantly and if nero State doesn't detect my DVD even! I'm not able to write on my DVD-R media...

  In short: write to RWs is possible for both cd - r and dvd + RW not possible of writing on CD - R and DVD-R.

  Please help me.
  It is only 7 months since I bought this laptop and believe that there may be no other person on this planet who looks after the training better than me!
  Really, I have not much used this drive and never scratched/gradient/local support, only the Supermedium media inserted.

  Thank you

  Hello

  Well, based on your description it sounds like the drive cannot calibrate the lens and, therefore, it of not possible to read or write to these media.
  Usual it of not possible to fix this and the replacement drive is necessary.

  You can also consult the user manual. You will find a list with all supported and compatible media.

  I also found this topic in the forum:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=13170&MessageID=48243

• Satellite Pro M70-113: modem - very slow

  Hello

  I have a toshiba satellite pro m70-113 laptop. I bought it in Saudi Arabia, Riyadh.

  The problem is that when I use the modem (dialup) software from toshiba to connect to internet... the connection is very very slow... While on the same line, on my desk speed isn't a problem... on average, I get 1/4th of the speed I get on my desk... and on the same telephone line...

  What is the problem?

  Can someone help me in this... are there any configuration software that can fix this problem?

  Help will be very appreciated...

  Thank you.

  Hello

  I don't know what your desktop device modem, but modems takes care of different speeds.
  You can also check the properties of the modem for laptop.
  Go to the Toshiba software modem properties and check under the tab "modem".
  You will find the maximum port speed. This should be set to the highest value.

  It is also possible that different providers use a different speed of data transmission.
  Some time ago I used a modem and I was very surprised that my speed of data transmission is different on the different suppliers.
  As you can see there are many factors why you don? t get the same speed of modem.

• Satellite Pro M70-113: Express Card slot - what for?

  Hello

  can someone tell me what is the slot for card express on my satellite pro m70-113 like what material can I connect to it for expansion...

  Thank you...

  Post edited by: ashishsoni

  Hello

  I guess that your average slot on the right side of the laptop.
  Well, the express card expansion slot can accommodate two standard module formats: an expressCard/34 and expresscard/54 module to the module. An expressCard module is small, modular add-in card technology based on USB and PCI Express interface.

  Please read this article:
  http://www.hardwaresecrets.com/article/89

  Good bye

• Media Express on Satellite Pro M70-113 player

  Hello

  I have satellite pro M70-113 laptop.

  I don't have any express media player recovery cd I've read something like this in this forum

  The problem is that I can't use the express media player

  What is express media player to support model?

  When I press the button of the express media player, the normal win xp starts and the windows media player starts after the os loads and not the media player exprss (but in this case the operating system should not boot, only the express media player, which is not the case).

  Can anyone suggest what is wrong and whi can not use the express media player?

  Thank you...

  Hello

  As Miro said that you all the portable wit Express Media Player has media express own recovery CD player.
  The buttons on the right side are Toshiba controls and the function of this button, you can change in the Control Panel - control of Toshiba.

  Best regards

• Satellite Pro M70: removal of the USB device causes other peripheral USB does not work

  Withdrawal/use of a USB for a USB device causes devices on USB port to get affected.

  Satellite Pro M70-199 (2 GB RAM)
  Windows XP Pro (SP2) with all updates of Windows installed until end of October 2006.
  This laptop has 3 USB ports.
  An Eicon Diva ISDN USB modem is connected to a USB port.

  When certain devices connected to a different USB port are deleted (even if removed safely with "eject" or "remove device safely", it causes the ISDN modem to file either a double channel (64 k + 64 k) ISDN, or for the ISDM modem to disconnect completely.)

  Cause this include any memory stick USB, MP3 player (ipod and creative zen) and so on.

  Do other devices, such as USB external hard drives & sometimes external DVD USB drives, and sonetimes do not produce this problem.

  Is this a known issue?
  If it is a hardware interrupt problem, how to solve it?
  This problem is related to the modem and the laptop?

  As a note, in addition, intermittent (random) times (cannot reproduce all the time, but it happens once or twice a day) when a USB device is accessible it causes the modem USB ISDN to drop a single channel, even if the lights on the modem still show it as it is connected. In this case and the case above, the only way to get the modem ISDN USB running again is physically disconnect and reconnect.

  The reason why it is a crucial issue is that:
  (1) the modem speed is halved or disconnected
  (2) the ISP continues to full rate for a double load connection even if a channel has been dropped.

  Any help will be greatly appreciated.

  Here is some information on USB devices, followed by some information about IRQ settings.

  Driver date 01/07/2001
  Version of the driver 5.1.2600.2180
  Driver provider Microsoft
  File INF usbport.inf

  Description of the driver Intel (r) 82801FB/FBM USB Universal Host Controller - 2658
  Location Information PCI bus 0, device 29, function 0
  PCI Device Intel 82801FBM ICH6-M - USB Universal Host Controller [B-1]
  Device resources
  IRQ 23
  Port 1800-181F

  Description of the driver Intel (r) 82801FB/FBM USB Universal Host Controller - 2659
  Hardware ID PCI VEN_8086 & DEV_2659 & SUBSYS_FF001179 & REV_03
  Location Information PCI bus 0, device 29, function 1
  PCI Device Intel 82801FBM ICH6-M - USB Universal Host Controller [B-1]
  Device resources
  IRQ 19
  1820-183F port

  Description of the driver Intel (r) 82801FB/FBM USB Universal Host Controller - 265 a
  Hardware ID PCI VEN_8086 & DEV_265A & SUBSYS_FF001179 & REV_03
  Location Information PCI bus 0, device 29, function 2
  PCI Device Intel 82801FBM ICH6-M - USB Universal Host Controller [B-1]
  Device resources
  IRQ 18
  Port 1840-185F

  Description of the driver Intel (r) 82801FB/FBM USB Universal Host Controller - 265 b
  Hardware ID PCI VEN_8086 & DEV_265B & SUBSYS_FF001179 & REV_03
  Location Information PCI bus 0, device 29, function 3
  PCI Device Intel 82801FBM ICH6-M - USB Universal Host Controller [B-1]
  Device resources
  IRQ 16
  Port 187F-1860

  Description of the driver Intel (r) 82801FB/FBM USB2 Enhanced Host Controller - 265C
  Date of the driver 06/01/2002
  Driver Version 5.1.2600.0
  Driver provider Microsoft
  File INF usbport.inf
  Hardware ID PCI VEN_8086 & DEV_265C & SUBSYS_FF001179 & REV_03
  Location Information PCI bus 0, device 7 function 29
  PCI Device Intel 82801FBM ICH6-M - Enhanced USB2 Controller [B-1]
  Device resources
  IRQ 23
  Memory B0000000-B00003FF

  Description of the device resource sharing
  DMA 04 exclusive Direct memory access controller
  IRQ 00 exclusive system clock
  IRQ 01 exclusive Standard 101/102 key or Microsoft Natural PS/2 keyboard
  IRQ 08 exclusive system CMOS/real time clock
  IRQ 09 shared system compatible ACPI Microsoft
  IRQ 11 shared Intel (r) 82801FB/FBM SMBus Controller - 266 a
  IRQ 12 exclusive pointing Alps-device
  IRQ 13 exclusive Numeric data processor
  IRQ 14 exclusive Primary IDE Channel
  IRQ 16 shared generic CardBus controller
  IRQ 16 shared Intel (r) 82801FB/FBM USB Universal Host Controller - 265 b
  IRQ 16 shared Intel (r) 82801FB/FBM PCI Express Root Port - 2662
  IRQ 16 shared Mobile Intel (r) 915GM/PM Express PCI Express Root Port - 2591
  IRQ 16 shared ATI MOBILITY RADEON X 700
  IRQ 17 shared Realtek AC97 Audio
  IRQ 17 shared Intel (r) 82801FB/FBM PCI Express Root Port - 2660
  IRQ sharing 17 Texas Instruments PCIxx21 Integrated FlashMedia Controller
  IRQ 18 shared Intel (r) 82801FB/FBM USB Universal Host Controller - 265 a
  IRQ sharing 18 Texas Instruments OHCI Compliant IEEE 1394 Host Controller
  IRQ 19 shared host controller Standard SD compatible SDA
  IRQ 19 shared Intel (r) 82801FB/FBM USB Universal Host Controller - 2659
  IRQ 19 shared Intel 82801FBM Ultra ATA Storage Controllers - 2653
  IRQ 20 shared of TOSHIBA software modems
  IRQ 21 shared Realtek RTL8139/810 x Family Fast Ethernet NIC
  IRQ 22 shared Intel (r) PRO/Wireless 2200BG Network Connection
  IRQ 23 shared Intel (r) 82801FB/FBM USB Universal Host Controller - 2658
  IRQ 23 shared Intel (r) 82801FB/FBM USB2 Enhanced Host Controller - 265C
  

  Post edited by: sakhri

  Hello

  I have Satellite M70-159 and I didn t notice any strange problems with the USB ports. I use a few of them as printer, webcam, USB, memory stick, optical mouse, and external HARD drive. The devices are recognized correctly and I always remove without option delete without danger.

  Now I have Vista pre-installed and there is no problem so far. If I understand you right USB ports work fine but there is problem with USB modem only. Am I wrong?
  Also try to contact the producer of modem support. Is perhaps the question like this known and if all goes well, they have a logical explanation.

• Satellite Pro M70 - what is the Bluetooth module reference number

  Could someone who has a Toshiba Satellite Pro M70, with bluetooth, tell me the part number of the bluetooth module please?

  You can reed one of the labels under your laptop. You can read bluetooth inside, the reference is in the left side of the label, and it will be something like this: PA3418U-BTM.

  Thank you.

  Hello

  Why you n t make a call to the service allowed in your country partner and would order a compatible BT module for your laptop?
  In my opinion, it would be the best way to get a.

  Unfortunately I m no owner of the satellite Pro M70 and, therefore, I have don t know the part number for BT. But my A210 has been equipped with an internal module of BT and PA3608U-1BTM part number

  Welcome them

• Satellite Pro M70: Question on the port on the left hand side

  Another question regarding the Pro M70 PSM75E, next to the hard drive (left side) there is a port which you can take off. I took it of and it looks like a chip grafx or something: s someone with the M70 not what it is.

  Thanks again

  Hello

  Well, there are of many Satellite Pro M70. It s a great series.
  But for example Satellite Pro M70-110 has a PCMCIA Type II slot.
  You can use the different PCMICA card in this slot. But they must be compatible.
  I guess this slot machine, you found a plastic Board. This is only for security.

  However, if you want to learn more about your device, I would recommend reading the user manual which must be preinstalled on your laptop. You will find very, very, very ;) useful information.

• Satellite Pro 4600 cannot load the BIOS update

  Satellite Pro 4600. When starting I access Windows 2000 screen and then get the blue screen "The ACPI BIOS in this system is not fully compatible with ACPI." Please contact etc etc for BIOS updated. I downloaded version of update of the BIOS 2.60 since the Toshiba site and installed with a message "installed successfully". I always get the "bluescreen". Where I'm going wrong? Help would be appreciated.

  Y at - it the ability to boot the operating system in safe mode? It works correctly?

  Did you have a new installation Win2000?
  Give us more information.

• Satellite Pro A200 - question on the BIOS update

  I have a Satellite Pro A200 (PSAE7E) with Windows Vista and XP that have been installed recently.
  In the driver of Toshiba page (BIOS update) says:

  "This Bios is only compatible for portable computers with Windows Vista!"

  (1) should I update my BIOS (1.4) or it'll be a problem for my windows XP?

  (2) anyone has try?

  (3) is there documentation on the BIOS updates (bug fixes, etc.)?

  Hello

  I will try to be very short with answers:
  1. If you use Windows XP Home edition on your laptop have BIOS update with the version 5.30
  2 this version of BIOS is available for days and it is possible that many people already tried. By the way: until Toshiba out something that is tested and verified.
  3. Unfortunately there is documentation about bugs and patches, but the fact is that Toshiba has designed the 5.30 version to support the features of Windows XP Home edition on the models of laptops designed Vista

  Good bye

• Satellite Pro A120 - screen of the BIOS open for a second

  My screen BIOS, but only for a second, then goes, I can't keep the BIOS screen to check anything.
  Any ideas anyone

  That is the first time I m reading about it
  Have you tried to update the BIOS?

  Latest BIOS version found on the page of the European driver Toshiba
  Ensure that Hat you choose the good BIOS and update of system performance.

  After that, check if you can access the page of the BIOS.

• Satellite Pro 4280 - problem with the BIOS password

  Hello
  I decided to revive my old laptop Toshiba SP 4280 but failed to get the system because he wants me a passowrd initially.
  I have tryied to get out a map of Moser for 24 hours battery - but it did not help.
  I tried a few passwords backdoor, like Toshiba, toshy99, but it did not help.
  I've successfully upgraded BIOS the most recent a 2, 70-TRAD, but again he asks me a password.

  Could you help me please with this problem?
  What can I do?

  BTW, I can't get into the BIOS Setup and select the source of loading (Hard, FD or CD) because I have to enter a password first.

  Thank you very much!

  Hey,.

  Unfortunately, I don't think that an authorized service provider can help you get rid of the password because they have special tools to do and how to do it. Maybe some jumpers must be defined, but I put t know

  On the Toshiba Web site, you can find a list of aspic call them and ask for help, all that s! ;)