Satellite Pro M70: Cannot get TV OUT work

Similar Questions

• Satellite Pro L20 - cannot get WLAN to work

  Hello

  I have problems with my Satellite Pro L20 after a reinstallation. The wifi does not work.
  I installed the right driver, but have had no luck.
  Anyone with the same problem?

  Any help would be great

  You reinstall your laptop computer with the recovery disc or Microsoft?

  Do you have which driver installed?
  You must use the driver from the Web from Toshiba site. Check again:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Perhaps a BIOS might also solve the problem.

• Satellite Pro 6100 cannot get my GyroTransport new 'air mouse' to work

  Satellite Pro 6100 running XP Professional with SP3 and all updates as of 10/24/08.
  BAUGHT a new mouse made by Gyration GyroTransport air, but it won't work on my laptop.
  Tried in several other computers with the same OS and it works very well. In fact as a teacher, I recommend one of these brilliant sound devices.

  I tried all settings via the control panel and can not work on why it won't work.
  The laptop recognizes the name of it when its plugged in but the States, he has a problem. The dongle USB/receiver with a memory stick with some additional software on this subject, but the laptop does not regognise the memorystick at all. He acknowledges that other memory stick no problem.
  That technician school COMPUTER looked at it and can't get by either.

  It is usually on the spot.
  Any body out there of suggestions?

  This mouse works on some laptops newer with USB 2.0 ports?

  One last thing: If you use some additional hardware to help apply the manufacturer's support. Computer laptop manufacturer doesn't provide support for certain third party materials.
  What Thompson says about this problem?

• Satellite Pro M10: Cannot get a resolution of 1680 x 1050 px

  Hello

  Recently I have bougth a screen Dell 2005FPW with a native resolution of 1680 x 1050.
  With the standarddrivers of the geforce4 420 go in my satellite pro m10, I can't get this resolution (max 1280 x 1024).
  How can I solve this problem and work to the full capacity of my screen?

  Hello Jorré

  Sorry, but I don't see any problem. The fact is that there is a restriction of the graphics card and if the max resolution is 1280 x 1024 you cannot set upward for external LCD.

  Maybe you can try with something like this http://eshop.macsales.com/item/Viewsonic/VTBOOK/

  Good bye

• Satellite Pro 6100: cannot get into the BIOS and does not start

  I have a portable Satellite pro 6100, en I was trying to boot from an external USB hard drive. When I activated the second hard drive option in the BIOS it has stopped booting all in all, I can't even get into the BIOS Setup more. All I get is "In touch with tomorrow TOSHIBA" screen with the icons to select the method of priming preferred manually after it's just blank screen with a cursor blinking in the upper left.

  Press ESC or F8 before to turn usually results in fast beeps sounds.
  Press tilde (~) before turn is reflected in the remaining space screen (not even the home toshiba screen appears) and slow Zens sounds.

  Apart from that I can't really do nothing at all.
  I tried to reset the BIOS by disconnecting the battery CMOS/RTC (hoewever, we call it) of the motherboard for a while with no results.

  Turn on/off without the results of HD internal in a white screen with an ERROR 'IDE #0.
  I can always stop by pressing the power button, you don't have to bother on the external hard drive it past I don't even want it works more.

  Suggestions?

  Hello

  I agree with Graeme. Your HARD drive is probably faulty. Sorry, but I don't think that you will be able to use the external HARD drive. The option in the BIOS is not for EXTERNAL HARD drive is just, I guess, for disk HARD placed in select Bay.

• Satellite L45-S7419 - cannot get device WLAN working for XP

  Hello all and ty in advance for anyone who can help.

  I have a serious issue that I have not been able to understand and finally just abandoned.

  My father has a Satellite L45-S7419 which has wifi 802. 11 b/g, built in at Bestbuy which came with Vista there is quite some time and I finally had the time to put XP on it (which, in itself, was a challenge) and I am unable to get drivers that work with the built-in Wifi.

  In Device Manager, it shows the device with a yellow "?" and no driver installed. Unfortunately, Toshiba has no drivers for XP, but fortunately (I thought at the time) realtek had drivers for RTL8187B. Who called on the site - (RTL8187B driver auto Installer Windows (Win2K/WinXP/Vista support), Win2K/WinXP/Vista driver ver.1158 1158 20/11/2009)

  I installed the drivers, but the device is not simply either recongize or it some how is not the correct drivers, because the appliance does not work.

  Does anyone have an idea what I can do? I tried everything that I can with my knowledge. I tried another way to install and uninstall the device first Manager device, installed the drivers then that the "new Device Manager" jumped upward and the device of RT8187B popped up, but still get the "new hardware found" and the right afterwards "the unit works may not properly" or something similar. As if I had just install the driver itself.

  Any help would be appreciated wildly. Ty!

  Hello

  Have you checked if the WLAN function is? Therefore, you can use the switch of hardware on the laptop and the combination FN + F9.
  Check this box!

  Can you also tell us what version of BIOS is installed on the laptop? In your case, I'd install the latest version of the BIOS. Sometimes, I could here it solves different problems WLAN. It s worth a try! ;)

  I think that, in the worst cases, you must use the preinstalled operating system (Vista). There are all the drivers and tools pre-installed so I m asking you to install another OS. Now, you need to install a large number of drivers and you must spend a lot of time for that so I always prefer the preinstalled operating system.

  Welcome them

• Satellite Pro L550 - cannot get 1920 x 1200 on external monitor

  Hi all

  I can't get nativ resolution (1920 x 1200) to my external monitor via HDMI conection.
  Catalyst or monitor settings in windows XP gives max res only 1920 x 1080 - why?

  NB Satellite pro L550 (ATI 5165, hdmi), LG L245WP (hdmi). Thanks for the reply.

  Hello

  Cable HDMI and the port, would support the resolution 1920 x 1200, but the fact is that if the graphics card or the graphics driver doesn t card supports this resolution, then you won't be able to choose and use.

  In your case I would look in the user manual and check if the graphics card would support this resolution. If the graphic card supports the problem could be related to the graphics card driver that does not contain this resolution.

  Greetings

• Satellite Pro M70: graphic driver does not work

  I downloaded the vga driver for my M70 pm76, but it did not work I tried the two versions available.
  Can someone help me?
  Sorry I'm a beginner

  What do you mean by not work?
  It is not possible to install the driver on the laptop or is there other problems?

  I put t know what you did on you laptop, but perhaps you have reinstalled the entire operating system. If you have installation problems, so I recommend you to check the installation instructions document. You will find the straight line of the order and the guide how to install the drivers and tools.

• Satellite Pro M70 - Windows XP has stopped working - registry problems

  My M70 lost (I will follow soon!). Windows XP has stopped working, registry problems. I finished by using the Toshiba Recovery disk and reformat the hard disk. Said again there is some registry problems and crashing.

  One had similar problems?

  Phil

  Hi Phil,

  If your laptop is always report registry errors after having re-installed the operating system from the recovery disc, then it is likely that your hard drive has errors. The Windows XP registry is composed of several files (or urticaria), and the installation process will always be located in the same area of the hard drive.

  Kind regards

• Satellite A350-20s - cannot get FN keys work

  Hello

  Recently, I formatted the hard drive and installed Vista Home premium new because it was slow. Before formatting, I had turned off the touchpad to use because I found it very uncomfortable to use. So, instead, I used an optical mouse. Once I installed Vista the touchpad did not work and the fn did not meet the F1, F2 - F9... The strange thing is when I press the Fn key, the light comes on and shows his work and when I press Fn + F10, the NumLock Gets and when I press Fn + F11 it goes to normal qwerty keyboard.

  I have downloaded all the drivers for the laptop, including the official Web page of TOSHIBA touchpad driver and tried all the tricks known in the book, but always truggling to get this function of the keyboard work? Your help is very appreciated.

  My laptop is still under warranty, but I'm afraid to send it because they would go like you hav formatted the hard disk drive even I hav installed on the same OS that I already had.

  This is the main reason for this post. Listen to me please

  Hey Buddy,

  I doubt that you have downloaded from the Toshiba site, otherwise your FN keys work correctly! ;)

  In any case, for the FN keys, you need to install Toshiba Value added Package. With this package it is also possible to enable/disable the touchpad. It brings all the FN keys to work.
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Just download the version you need and that s it!

• Re: Satellite Pro M70 - cannot save a voice

  I can't record voice using the Accessorise-online entertainment-Sound Recorder online it will give clip of silence

  In addition, I can't record voice message in Messenger, it can not detect the voice

  Thank you

  Maybe you should check you first external microphone if it of working.
  Then you could test is in Control Panel-> sound & audio properties-> voice-> test equipment

• Satellite Pro M70-275: screen doesn't work after waking up from hibernation.

  Hello

  I sometimes encounter this problem: when starting the hibernation (not sure of the English term, although that. "light sleep" mode in WinXP...) the screen turns on again. The operating system seems to be up and running again, but I really don't know because I do not...
  Sometimes it works fine, but I would like that it works all the time.

  Any ideas?

  / Johannes Ogren
  Gothenburg, Sweden

  Hello

  Will there be the same situation after waking from sleep mode?

  James is right. Usually, this kind of questions is fixed with the new version of the BIOS, but you can also try installing the latest version of Power saver utility.

  If anything maybe you must reinstall the OS using supplied recovery DVDs.

• Satellite Pro M70 - cannot install the Driver of Toshiba Power Saver

  Hi, I can not install driver of toshiba power saver on my laptop because instalation crashes with error 1610: the configuration data for this product are damaged. Please contact the support staff. I tried several versions of driver of standby power. I received the latest official chipset driver... Someone knows how to fix this?

  My second problem is with the battery, my laptop running on battery max 10 minutes (I have my laptop for 2 years) and I often force using battery power. Battery can lose so much capacity in 2 years even if I used for my battery once a week?

  Sorry for the English and thx for answer

  I think that you should not install this driver, the only saving electricity only.
  What about the battery? In my opinion, it is possible. In my opinion, the duration of battery life cannot be defined so easy.
  Some batteries perform well after 3 years of use, and some of them are dead after only a year.

• Satellite Pro M70 cannot be started correctly

  Laptop will not start correctly. a failure message
  Could you please help me?

  Could you please be more specific? What laptop you use?
  What is happening exactly! ??

• Satellite Pro M70 - wireless has stopped working

  I have a Satellite Pro M70 and the wireless stopped working. The yellow light lights up for a few seconds for the machine to wake up but then turns off. I rebooted several times, but that did not help. In your reply please clarify abbreviations - thank you!

  Post edited by: boston1

  Hello!

  Have you tried to update the driver WLAN? You can find it on the Toshiba site or portal driver WLAN:
  http://APS2.toshiba-tro.de/WLAN/

  Have you checked for yellow exclamation marks Device Manager?

  Check if the laptop WLAN switch lights up and I can disable/enable WLAN with FN + F9 on my Satellite phone.
  Check it!

  Good bye