Satellite Pro M75 with Vista: Mat * a UJ - 841 S cannot save

Similar Questions

• Satellite Pro A200 with Vista is not another mobile network XP

  I have the Satellite Pro A200 Toshiba and I have some problems with the network.
  The Inernet is upp and go, but I can't find the other computers on my network.

  Im having 3 other computers on the network. The A200 is having Vista and the other has just XP - pro and XP-Home Edition.
  The network of the stand-alone tree works well but the laptop is not present in the network.

  I have checked the task force if it even.
  Y at - it anyhone who is having an idea how or what is the problem?

  Have you tried to use the option of network discovery in network and sharing Center?

• Satellite Pro M50 with Vista: how to get the S-video on the job?

  Hi all

  I have a vista equipped Satellite Pro M50. Does anyone know how to get the S-video on the job? I can't understand.

  Inadvance, see you soon

  Phil

  Did you look in the user manual?
  This doc is always pre-installed on laptop and provides useful information. Also how to connect a TV and use simple notebooks ports.

  A hint; You must use an s-video cable to connect the laptop to the TV.
  Then use the FN + F5 key combination to switch between display devices.
  Sometimes the special s-video option must be enabled on the TV.

  I would recommend consulting the manual of the TV also.

  Good bye

• PCMCIA does not work on Satellite Pro U200 with Vista

  Hi I have upgraded to Vista family premium on U200 and up to now, almost everything is fine.
  However, I have 2 PCMCIA issues that are bugging me:

  -Any cause of inserted card PCMCIA machine to slow down considerably and mouse movement etc becomes juddery. This is particularly serious if I insert a Toshiba PCMCIA hard drive or a card reader.

  -J' have digital TV card to PCMCIA havea for which I can't find the Vista drivers. It works fine with the drivers XP however I get horrible squealing sounds and treble beeps high for a minute or two each time I have change the channel. The card is a generic of an OEM supplier.

  Any help appreciated.

  Have you tried to update the BIOS or change settings in the BIOS?
  The u200 Pro has been delivered with the Toshiba BIOS I hope
  On the second page of the BIOS, you can try to change the mode of PC Card controller. You may notice improvements.

  For digital pilot card PCMCIA TV in Vista, you must ask the card making or visit the support page sorry that's all I can suggest

• Satellite Pro U200 with Vista: ConfigFree can't see implementation of the SUMMIT

  I can't see the implementation of the SUMMIT to configfree.

  Please let me know

  Sorry Ronen, but I really don't understand what you mean exactly below the SUMMIT. ConfigFree is well known to me, but now I'm really confused.
  In my case, it works fine. I can watch and see all networks; LAN and WLan...

• No sound in Satellite Pro P200 with XP

  Hi all.

  I have a Toshiba Satellite Pro P200 with Windows Vista preinstalled. I removed Vista and installed Windows XP with Service Pack 2, due to the incompabilités with some software I need. Almost all of the necessary drivers for XP (even a downgrade to BIOS) was downloaded and installed from Support from Toshiba web page. But there are still two devices that I can not install. At the start of my laptop it always detect "* Microsoft UAA bus driver for high definition audio *" and "* controller memory PCI - Chip for logical Cache Flash in Intel (r) *" as new hardware and they appear marked in yellow in the Device Manager list.

  I installed the last bus Microsoft UAA for high definition audio driver for XP from Toshiba and Realtek too... a lot of time and in different ways... Previously I installed the High Definition Audio Driver Package - KB888111 from Microsoft. But I still have no sound.

  PCI memory controller - Intel(r) Flash Cache Logic Chip: the same... tried the drivers the most recent Toshiba one Intel too. Toshiba technical support told me that this unit is ready to run on Vista and have suggested me to try with Robson drivers for Vista Support from Toshiba's web page, but that didn't work either.

  I googled a lot, searched this forum and called technical support, as I said, but I've not found a way to solve these problems. Really, I can't believe I bought a laptop that only works with Windows Vista, I resist assume this idea, so I continue to try and try to make it work properly with the operating system that I need and I have chosen freely.

  Any idea?

  Thanks in advance.

  Hello

  > I installed the last bus Microsoft UAA for high definition audio driver for XP from Toshiba and Realtek too... a lot of time and in different ways... Previously I installed the High Definition Audio Driver Package - KB888111 from Microsoft. But I still have no sound.

  You're on right way boyfriend, you must also install another patch MS; KB835221
  So finally the KB888111 and KB835221 must be installed before you will follow with the audio driver installation.

  Check this thread:
  http://forums.computers.Toshiba-Europe.com/forums//thread.jspa?MessageID=113124

  > PCI memory controller - Intel(r) Flash Cache Logic Chip: the same... tried the drivers the most recent Toshiba one Intel too. Toshiba technical support told me that this unit is ready to run on Vista and have suggested me to try with Robson drivers for Vista Support from Toshiba's web page, but that didn't work either.

  The problem is that this unit only works in Vista.
  The controller memory PCI is that intel Turbo Memory, also called Intel Flash cache logic chip also called device Robson.
  It's quite new technology designed to support the new features of Vista.
  There is not driver for it for Windows XP because XP doesn t supports the function of cache, it is supported by Vista.

  Hope I could help you

• Satellite Pro A200: XP + Vista possible installed dual boot?

  Hello

  I don't know if I'm here the XP OS but I post because it is OS related.

  My Satellite Pro A200 (PSAE7) works well with XP but I want to create a sandbox (partition) for/with Vista.

  Basically, I know that it is possible to run XP and Vista on a system. * Goal *, computers laptops satellite Pro A200 are delivered with a BIOS for XP and Vista, and with the information you need to install the right pair. For me, this means that you will install the BIOS for XP when running BIOS for Vista and XP in Vista.

  Question:
  Is it possible to install Vista on a Satellite Pro A200 with XP as main OS and have installed XP BIOS?
  Boot loader would be Acronis OSS like this charger already managing my two XP partitions.

  Thank you very much for any information!

  Best regards
  Andreas

  Hello

  In my opinion there is no serious reason, why you should t be able to use Xp and Vista on your Satellite Pro A200.

  Okay, there's a different BIOS for Vista 64-bit, 32-bit and Win XP, but your Vista should also work using the BIOS for Win XP.

  I have other laptops Satellite series and I m able to use XP and Vista at the same time. I mean I have a choice to start Vista or XP ;) and I m still using the old version of the BIOS.
  OK some functions are not available as FN keys, but this is not very important for me.

  Well, to cut this story, I think you can use Vista and XP without changing the BIOS ;)

• Satellite A100-011 with Vista: DVD-ram UJ-850 s can not burn DVDs dual layer

  Hello

  cannot find answers to my problem, so start a new topic.
  Having Satellite A100-011 with Vista preinstalled and Mat * a DVD - RAM UJ-850 s (firmware 1.10).

  Recently installed Nero 7.5.9 and you want to burn DVD (6, 5 GB) media dual layer (Immation - Ritek).

  First time Nero stopped with information: could not perform start of Disc At Once (without damaging the media).
  After that, run Nero as Windows XP - SP2 program and burn half the disc (first layer), but when to start to burn the second layer (I guess), stop once again with the same error information (could not perform start of DAO).

  Simple disc burning layer without problem.

  Anyone any idea how to solve this problem?
  Thank you
  Luci

  Hello

  tried to record double-layer of a different brand? Maybe you should try it, because sometimes certain brands are not really taken in charge or not very well. And check the toshiba (or google) pilot site for new drivers or firmware for this drive, sometimes that it really helps.

  I think that the media are not really compatible, I ve read some similar problems in the roxio forum and they solved by using another brand.

  Would be nice if you give some information on this case... :)

  Welcome them

• Fully operational GPS on Satellite Pro S300 with F3507g card

  Hello

  Some good news. I have the GPS works entirely on the Toshiba Satellite Pro S300 with F3507g 3 G card. I think that the measures to make operational work on any Toshiba laptop with the same card.

  It requires new 3G Toshiba drivers for the card that exposes the COM7 GPS port, some trick with the COM port for the card out of the location data (this would have been done by a Toshiba application if they support the GPS), then it will work with any application that supports GPS.

  I used the land bridge to verify this works and this allows tracking on Google Earth, see [image here | http://img405.imageshack.us/img405/2262/earthbridgepd2.png] (note that I blanked my exact location because it locates my front door). This signal was achieved with the laptop near a window.

  What I plan to do is to make a small application to enable or disable the GPS receiver and will post some instructions on how to address all this, which is quite easy other cunning of Com port that I hope, I can make do with a small, free program.

  Concerning

  Phil

  Post edited by: Philip_l

  Hello Philip

  Thanks a lot for this thread. This is really interesting stuff and it will be interesting to have a little more and more to report about it. If you have time please do it for this wonderful community.

  I just hope that the moderator will pay attention to this subject and maybe offer you more space or even separate category for people like you.
  It will be great to have some sort of blogging here.

  In any case, respect for your work and I hope to learn more about these interesting topics.

  Good luck!

• Can I go through Satellite Pro 4300 with disk HARD mk8032GAX?

  Hello and thanks in advance. The question is: can I upgrade the hdd by default in satellite pro 4300 with mk8032GAX model?

  (Sorry for my English)

  Concerning

  The question is whether the laptop and the BIOS is able to manage the size of the HARD drive.
  The mk8032GAX is a 80 GB, 2.5 HARD disk at 5400 RPM and 8 MB cache.

  I discovered that this laptop supports these drives:
  5,59 GB Toshiba MK6414MAP, Toshiba MK6411MAT
  11.2 GB Toshiba MK1214GAP
  16.9 GB Toshiba MK1814GAV

  Perhaps also a 30 GB might be compatible, but to be 100% sure, a test is necessary.

• Satellite P100-160 with Vista: No TV-OUT after downgrade to XP

  Hi guys hope you can help me out here...

  I recently bought a laptop (satellite p100-160) with Vista on it to know that it was not compatible with wot I bought dethrone so I decided to downgarde for XP Home Edition... Solange decommissioning that I had to install a few drivers like there's do and everything went well...

  Anyway, a few weeks later (yesterday), I went to watch a movie and when I pluged in my tv out cable, I have nothing. I tried to unplug and plug in again a few times but still nothing, it normally switches on in about 20 seconds... So im guessing that either I need to a driver or a Summit.

  Can someone help me out here?

  Thanks a lot

  You n t need a special driver to use the s-video port.
  You must install only the compatible graphics driver.

  How have you tried to switch to the TV device?
  Have you used the FN + F5 key combination?
  You should do this.

  Connect the TV to the laptop using the s-video port. Then select the s-video on the TV and choose the right channel.
  Press the FN + F5 several times until you get a picture on the TV.

  Please note; Don t start the DVD software like DVD win until you have not enabled on TV!

• Re: Satellite A300-145 with Vista 32 maximum RAM?

  Hi all!

  I have satellite A300-145 with Vista 32 home Premimume - now on laptop installed 2 modules of 1 GB of RAM (for mode dual channel)

  Q: if I replace the RAM to 2 modules of 2 GB of RAM this mode dual channel still & 4 GB RAM?
  -May support A300-145 4 GB RAM? and Vista 32? (Intel GM965 chipset have support 4GB RAM)

  Hello

  Satellite A300-145 was equipped with a Mobile Intel GL960 Express Chipset. Or I m wrong?
  AFAIK this chipset provides only the 2 GB support

  > If I replace the RAM to 2 modules of 2 GB of RAM this mode dual channel still & 4 GB RAM?
  32 bit Vista will recognize only about 3.2 GB.

• Equipped with Vista 32-bit, lost sound and cannot install the Realtek-get code 800705 b 4, can anyone help, BB _ @_. _, Thank you

  Equipped with Vista 32-bit, lost sound and cannot install the Realtek-get code 800705 b 4, can anyone help, BB * address email is removed from the privacy *, thank you

  How does this relate to the features of Windows Update?

• Satellite Pro P200 - 1KE Vista loses contact with the second internal HARD drive

  Vista Business SP2. I have a Satellite Pro P200-1KE, with two 160 GB drives: a Hitachi configured as C: (operating system, programs, etc.) and E: (data, other programs). The second is a Toshiba MK1637GSX. This little about it and nothing of any importance and is normally configured as d. Unfortunately this hard drive has now become invisible to Vista, although it is still recognized by BIOS and Device Manager. In managing computer does not appear in the list in the upper pane, it comes without a letter from reader below. I have tried everything I know to get recognized, including the following:
  (In no particular order):

  * Remove computer - managed, reset as a single Volume: it always fails
  * Reformat to NTFS using Linux GParted or utility disk Linux (via a USB stick with Linux ice Peppermint on that nerd), sometimes combined with the restoration of the system - it works, but only for a single session. She always disappears again when you restart
  * Remove the driver from Device Manager and pointing plug-and-play with Windows System 32 and Windows Update - which seems to return the driver - but does not recognized disk, unfortunately
  * Meanwhile, throughout all this, Vista insists on finding a driver for "unknown device" that she sometimes found and (allegedly) installs and sometimes find one fails to install.

  Bah!

  Anyone know anything else I can try - preferably without having to reinstall the entire operating system, or run the risk of using Toshiba Hardware Setup that does not seem to come with all the instructions and enigmatic, who wonder if I want to delete stuff 'selected', without showing me what kind of things I am alleged to have selected for removal!

  Best
  David

  If this second HDD is not so important to try to start the original installation disk Microsoft (Vista or Win7) to see if the second HDD will be recognized for the installation procedure.
  You can also try to install Win7 on this second HDD to see if the installation is correctly finalized. Later, you can check if you can start the second HARD drive preinstalled OS.

  Test just to see if this problem is related to Vista only.

• No sound on Satellite Pro A120 with Windows Vista

  Hello

  I had to reinstall the Vista operating system and rebuild my Satellite Pro A120 from the revovery disk.
  Most of the things are fine, but I can't any sound to speakers of jack headphine.

  I checked said etil Realtek High Definition Sound Driver is installed and working properly.

  My volume buttons are up on the mixer and Windows Media Player.
  The driver is Realtek 6.0.1.5317

  Help would be appreciatesd

  Hello

  Please take a look here:

  + Audio cut off (no sound) after you install Windows Vista +.
  http://APS2.toshiba-tro.de/KB0/TSB7C021B0001R01.htm

  There is a tool that allows the sound again once it seems s Cup...

  Welcome them