Satellite Pro U300 does not hibernate if the lid is closed

Similar Questions

• FN + F10/F11/F12 in Satellite Pro U300 does not work

  Guys,

  need your help...
  I have the Satellite Pro U300 series and most recently the numbers four and six obtained busted... its does not work so I try to use the superposition of numeric keypad but I have observed that after pressing FN + F11 nothing happens...

  Please help me...

  Thank you
  <>

  Hello

  When you use FN + F11 small control LED must be lit and the keypad must be enabled.
  If your laptop is preinstalled with Toshiba recovery image this option SHOULD work correctly.

  So nobody here knows what you did with your laptop and why these options are not available more.
  Before you start with advice how to get this working again once please let us know what operating system is preinstalled on your Satellite Pro U400.

• computer Vista laptop does not stop when the lid is closed

  I have all the correct power settings. mode when the lid is closed, I tried setting Hibernate and sleep. It just keeps running and running, I'm afraid it will overheat. but it should stop when the lid is closed, correct? Thank you sissy

  Hello banditpunpun2,

  Thanks for the return of the response.  I also go to your manufactures website and confirm you are updated with the lates drivers, updates the firmware and BIOS.  I even watch the forums on the manufacturer's Web site to see if others have experinced the same question.

  Please let us know status.

• Satellite PRO U300 does not turn off

  Hello

  I am facing a problem for the last few days on my Satellite PRO U - 300 (31st PSU)...

  The machine does not turn off and the power light stays on (blue LED) even after you have disabled. In fact, happened 3 - 4 times when I start the computer normally by pressing the power button / stop, it does not start and I noticed that the indicator was not extinguished even after + shut down +. Like any it is blocked! I have to finally, remove and reinsert the battery to start the laptop.

  Some details of my pc are as under:

  Version of the OS Microsoft® Windows Vista Business 6.0.6001 Service Pack 1
  BIOS Version V2.00
  Processor Intel (r) Core (TM) 2 Duo CPU T7100 @ 1.80 GHz

  Can someone help me solve this problem. Is it possible that during the uninstallation of programs, any perticular driver file is also deleted?
  Thank you

  JITENDRA

  Hello

  I don't know that you understand the indicator of power, but to me it sounds like AC Power LED and this LED is always on when the laptop is connected to the power supply.

  Power on / off LED is probably what you mean (the other starting on the left).
  Anyway, you turn off your laptop using a standard on the Start button?
  Are you sure you want to use the Hibernate mode.

  Believe me, the entire description here is pretty confusing to me. It may be that the laptop is turned OFF but power light is still on.

  Have you installed something 4 days ago? Or deleted some important application?
  Sorry, but it is not easy to say with certainty what the problem is here.

• Satellite Pro A100 does not connect to the internet if the power adapter is plugged

  Hello
  I have a Satellite Pro A100
  The machine will connect to internet on battery OK. However, if the power supply is connected it does not connect. Any ideas?
  See you soon
  Jim

  Hello

  How do you connect to the internet? With the WLan or cable LAN?
  It s very unusual as the intermits connection when the power adapter is connected.

  This question appears because you buy the laptop?

• Satellite Pro 460 does not start with the new drive in

  I recently received a Satellite Pro 460, but he had no hard drive.
  It starts great without a disc in but as soon as I put a new hard drive in it does not start.

  I thought that it might be again a hard drive, so I pulled out my old Toshiba Satellite with my old drive to work, and yet, it does not start.

  Someone has any ideas why this is and what I can do about it

  I think that you can not do much. Satellite pro 460 CDT, for example, comes with 2 GB of HARD drive. If you try to get it work with similar HDD without success, it may be defective IDE port on the motherboard.

  What HARD drive you are trying to use on this good old classic?

• Satellite Pro L300 does not connect to the internet using a broadband

  Hello!!

  I reformat my laptop with Windows 7 a few days ago.
  When I tried to use a broadband internet connection, it won't work.

  Pls help me on this.
  Thank you.

  Hello

  I assume you are talking about WLan.
  You have installed Win 7 as a new OS.
  Have you installed good WLan driver?
  The WLan card is recognized in Device Manager?

  If so, have you turned on the wireless network adapter by using a switch in front of the laptop, and FN + F8?

  LAN working properly?

• The product key on my Satellite Pro P300 does not work

  The product key on my Satellite Pro P300 does not work.
  I entered the key from the sticker on the back of the computer. What I am doing wrong?

  Hello

  Why use this product key?

  Firstly the Toshiba recovery image is already enabled and you don t need this key more activations.

  Second, it's an OEM key and it will not work with other versions of Vista!

  Cheers mate

• Why Satellite Pro A300 does not start when you press the power button?

  Suddenly my new Satellite Pro A300 does not start correctly when you press the power button. The situation is the following: when I press the power button is displayed the opening of Toshiba (Leading Innovation) and the disappers image quickly. Then there is a black screen for about 30 seconds. There is a rectangular frame with the text Microsoft Corporation under. And nothing happens however long wait.

  In order to get with the trial starting I then shut down the computer by pressing the power button until the computer turns off. ("The hard way to close")
  Now, I press the power button shortly to turn on the computer. Then, the computer starts normally with the photo to open Toshiba and after a few seconds, I wonder to open the computer in safe mode or in normal mode. I now choose to open in normal mode and the computer opens normally and is ready to work.

  What should I do to get a normal departure procedure?

  When the laptop starts normally (after choosing normal mode) stop your laptop properly using START > shut down option. Next launch should be normal.

  When the OS is moving towards the low irregularly will always ask you how to start this new (secure or normal mode).
  The same thing happen on my Satellite A300.

• Satellite Pro C660 does not illuminate

  Satellite Pro C660 does not illuminate. no noise, no light just fill out the dead.

  any suggestions?

  Hello

  On this virtual path, it is not possible to provide an accurate diagnosis. All you can do is to unplug the power plug, remove the battery and leave it for a while. Then press the power button and hold it for 15 or 20 seconds.
  After doing this connect the power running and try to start again.

  What happens when you do this?

• Sun disk MemoryStick pro duo does not fit into the laptop

  My disc solar memory stick pro duo does not fit into the laptop Envy nor the memory stick duo adaptor. How can I download my photos?

  Hello

  Whay is your cell phone? Many of them does NOT support memory stick family devices. You can connect your device to your computer OR you can go out and buy a card reader (USB connector, for about $ 10 to $ 15) that supports the USB key and plug it into the USB port on your laptop.

  Kind regards.

• I created a Javascript script that adds a watermark on the document action "paper print".  This works in Acrobat Pro, but does not work in the drive.

  I created a Javascript script that adds a watermark on the document action "paper print".  This works in Acrobat Pro, but does not work in the drive.  I am a novice using Javascript, so what am I doing wrong?

  Cannot use either addWatermarkFromFile or addWatermarkFromText methods of document with player as shown in the documentation. You can hide/display the form fields and the existing layers, so consider this approach.

• Try to download adobe first pro, but does not appear in the computer

  Try to download adobe first pro, but does not appear in the computer

  Premiere Pro is 64-bit.

  You must run a 64-bit operating system to install and run Premiere Pro.

• Satellite Pro M40X does not work with battery

  Hello

  I have toshiba satellite pro m40x laptop. It haves apromaly 11 months.
  In recent weeks, the laptop does not work with the battery.
  With the battery and the power running, if I turn on the laptop, it turns off after 10 seconds. If I only turn the computer batteries, laptop not respons.
  The laptop works without battery.

  I have rma is not the portable and the technical suport fixed the battery because it only 6 months guarantee.

  I'm sure that battery modules were not upset because I used the battery not very often.
  I disassemble and I wached the control circuit. I'm sure that something of them, it was broken, but I can't fix it without the schema.

  Another question is if I can change the graphics card to laptop. Is actually a x600se but I need power more graphic

  I hope you can help me

  gretings

  Hello

  It is not easy to say what the problem is here. Have you noticed something strange with LED power control? It is also possible that the electronic power supply do troubled. Try to talk with authorized Toshiba and explain the situation. If you open only one Notepad, uneducated, it may be simply worse.

  Graphics card cannot be updated as on desktop computers. I put t know how it is on this model laptop but the graphics card is fixed on the motherboard and cannot be traded.

• Satellite Pro 4230 - does not light

  Hello
  I have the following problem:

  A Satellite Pro 4320 will not feed, DC-in light is on (green), with inserted (quite old) battery, the quickly flashes orange, (charge of compensation, according to manual) battery. If I press the power button / stop, DC-In goes off for half a second and turns on, that of all, nothing else happens.
  The power supply is 15V 4Amps one correct, I load tested it works and provides all the power, according to the specifications. It does not matter if the battery is inserted or not.

  Now the question: is this a battery problem or there is a problem with the entrails of laptops (internal DC converter)? Normally, your laptop should work on the included power supply.

  Best regards
  Nohab.

  Hey,.

  > Normally a laptop should work on the included power supply.
  You're absolutely right, mate. All cell phones work with power supply only, theoretically, a battery is not necessary. That's only important if you want to work without power, otherwise laptop mobile working with power supply only. No battery is needed.

  So my personal opinion it of a card mother dysfunction :(