Satellite S1800-100 HARD drive is not detected

Similar Questions

• Re: Tecra 9100 - new HARD drive is not detected

  I have a Toshiba Harddisk provide a Tecra 9100. Checking the BIOS it shows "Enhanced IDE", but you are trying to boot from the disc does not work HARD. Even trying to install a new operating system present, that the HARD drive is not detected.
  From the laptop is also very long.
  Any idea?

  Your new HARD drive is larger than 120 GB? The HARD disk controller supports the 28-bit LBA and large drives as 120 GB will not be recognized by the BIOS.

  What you mean with Enhanced IDE? The BIOS recognizes the new HARD drive with model number?

• HARD drive is not detected in BIOS - need to recover data.

  What happened is that my laptolaptop takes a long time to start, so I slapped him. After that I kept getting the error message "no boot device, please restart". So whenever I restarted I kept getting this message. I also sometimes had "Media Fail" message. I pressed F2 at startup to get into the Bios. Settings so check I saw that hard disk still showed it's a Hitachi one.

  My hard drive was clicking to it so I searched online advice on what to do and I saw on the opening of the hard drive in a clean environment, ensuring that no dust went on the drive. I expect the head being stuck on disc, but it was not stuck. So basically, I put the lid on. Since then, the hard drive was not detected.

  Not in the Bios (he said no). I bought a CD to restart which can temporarily become Windows to the screen under Xp, so I can go to the computer to retrieve data from the hard drive. It shows nothing. There is always a clicking hard drive, more a ticking sound. It is always possible that an expert could remove the hard drive and recover my data that are valuable photos and videos.

  Thank you

  What model of laptop do you have?
  Try to set the BIOS to default settings and check if the HARD drive is recognized correctly.

• Second hard drive is not detected

  Hi, I bought an ssd to replace the hard drive of my acer e5 571g 50ns.
  Using a desktop computer, I transfer the os and oem SSD partiton.
  Because the laptop have a fake cd/dvd player I bought an adapter 2.5 ".
  So, I put the ssd sata port where before there was the hard drive and put the hard drive into the adapter port sata cd/dvd.
  When turning on pc the ssd is detected and it works perfectly, but the old hard drive is not detected. He is not shown in Device Manager

  As the garancy struck down, using my campus license, I installed windows 10 removal of the oem partitions.

  Now my acer works perfectly with ssd and hdd.

• Satellite A200 PSAF6A - HARD drive is not recognized. No recovery of product

  The drive HARD in my Toshiba Satellite A200 PSAF6A-0US01N is not recognized in the machine or any other computer, so I can't run any windows/toshiba repair.

  I know that readers have a factory reset hidden on the disc and press 0 to the power upward, but with the unreadable disk, how can I repair my installation of Windows Vista?

  Hello

  If the HARD drive is not recognized by the BIOS or other laptops, then I would say that your HARD drive is defective.
  In this case, you need to replace the HARD drive.
  In this case, you will not be able to start the recovery procedure from the HARD drive because it works badly as he has already said

  Are you from the Australia? If you need a recovery disk, I recommend contacting the local Toshiba ASP to get this drive

• P30: External hard drive is not detected when you use IEEE 1394 cable

  My P30 not / can not detect my newly acquired Western informed extreme Digitak Drive 320 when I connect via the firewire port. I use a 4-pin cable (which costs a fortune, by the way) who is supposed to be a way to connect this drive to a 6-pin pc.

  My ieee 1394 driver seems to be called 'VIA OHCI Compliant IEEE 1394 host controller".

  Can someone tell me what to do? I really need to connect the FireWire drive because I need the USBs for other devices.

  Thank you!

  Hi, Lars

  It is really strange. I use the external DVD drive (DL) using the same cable. I tested it with several units (old Satellite 1900, Tecra M1 and also new Qosmio G20) and everything works perfectly.

  Check the power supply to the external HARD drive.

• RAM and the satellite L20-100 HARD drive

  Hello!

  I have an old Satellite L20-100 and it has a few problems with the HARD disk. I want to buy a replacement (new HARD drive) so I need to know what are the types of FDI in L20 - 100 discs...

  In addition, what type of DDR2 RAM I should buy to install in this laptop?

  Don't want to buy a fake, because if I do, it would be very difficult to sell...

  Please, help :)
  Thank you.

  Post edited by: in_silent

  Hello

  I agree with Akuma L20 supports a SATA controller and you need and 2.5 SATA HDD.
  Usually it s no matter which manufacturer is all 2.5 SATA hard drives must be compatible

  With regard to the 48-bit LBA:
  As far as I know that this could be just a problem with HDD IDE (P - ATA). SATA HDD should not be affected. So, theoretically, you could upgrade the HARD disk using larger than 128 GB.

  Regarding the upgrade of memory:
  http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=20683&ft=m&St=3

  You need DDR2 533 MHz (PC2-4200) 200 - PIN SODIMM and you can use 2 x 1 GB RAM

• HARD drive does not detect the Tecra R940-1JG

  Hello

  I had double partition on the HDD for win7 pro and Win 10, but after update Win 10 that he was unable to start.

  I disconnected the drive and connected to my office and managed to recover the data.
  It works find in desktop, but it does not detect my Toshiba Tecra.

  I had an another 120 GB and tested in my Toshiba laptop and it works and detects ok.

  I change the settings of UEFI and AHCI but no joy.

  HARD drive is seen by BIOS?
  HARD drive appears on the first page of the BIOS?

• Satellite M30x - new HARD drive does not work

  Hello.

  I am installing a new ATA 2.5 "internal hard drive for my Toshiba M30X-166. The drive is a Seagate Momentus 5400.3 120 GB model. The laptop does not recognize the disc and no related error message appears, and in the BIOS, it shows as "HD not available."

  I put this drive in an external USB - IDE enclosure and was detected by my desktop PC, and I was able to partition and format the Momentus, so I know the drive is indeed work, but my M30X still does not detect the drive.

  What can I do to make the laptop recognize this unit? The BIOS M30X is: Phoenix EAL20 version 1.90.

  Thanks for your help.

  Hello!

  Have you tried another HARD drive? The new HARD drive is may not compatible with the laptop or does work does not correctly.

  Normally, a 120 GB HARD drive should work because the laptop has a limitation of LBA 28 bits and so you can only use hard drives 120 GB.
  In the worst cases, the HARD disk on the motherboard controller is defective :(

  Good bye

• HARD drive is not detected

  Had to reformat my hard drive on a 1640 Satellite. Had a lot of bad sectors and startup problems.
  The installer is said now that there is no hard drive (6 GB hard drive). Running Windows98SE. Don't have all the CD recovery, s but useless as no hard drive detected.

  Hello

  In my opinion you should start using this device with Win98 boot disk. If there is no possibility to access the HARD drive it must be some dysfunctions and it is possible that the HARD drive is defect.

• External hard drive is not detected

  My ext hdd does not work.

  It has music, movies etc., who came for a mac, but windows doesn't seem to work.

  She also is not recognized, by my Media Player connected to my tv.

  When I look at MY computer, the ext hdd appears, but it is in the Device Manager, but I can not access anything.

  Help me please.

  Hello

  Thank you for posting in the Microsoft Community Forum the problem you are having with drive external hard must be different. Rest assured that we would do our best to help you.

  Please answer the following questions that would help us provide a better solution.

  1. have you tried to connect the hard drive to a different USB connector?

  2 have you tried to connect the hard drive to another computer?

  3. what version of Windows are you using?

  4. What is the brand and model of external hard drive and the computer?

  Try the methods and check:

  Method 1:
  Run the fixit of material and following devices and check if the drive is detected:

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2:
  
  You can connect the external drive to another USB port and see if it appears in Windows Explorer.

  Method 3:

  Check if there are error messages in Device Manager if you are using Windows 7 or Windows Vista.

  a. connect the external hard drive to the computer.
  b. to open Device Manager, type devmgmt.msc in the search box start and press ENTER.
  in Device Manager, expand the hard drive listed in the list of devices.
  d. If the hard disk is listed, right-click on it > click Properties.
  in the general tab, under control of device for the message status. After back if there is no error message.

  If you use Windows XP try the following steps:

  a. connect the external hard drive to the computer.

  b. click Start, click run.

  c. type devmgmt.msc.

  in Device Manager, expand the hard drive listed in the list of devices.
  e. If the hard disk is listed, right-click on it > click Properties.
  (f) on the general tab, under control of device for the message status. After back if there is no error message.

  To visit the following link to the reference which discuss what to do when a device is not installed correctly
  http://Windows.Microsoft.com/en-us/Windows7/what-to-do-when-a-device-isn ' t-installed-correctly

  Hope this information helps. Please feel free to respond if you have any other questions, we would be happy to help.

• Iomega Dx HD scenario is a 1 TB USB hard drive is not detected. USBSTOR.inf_bb2778a0 is Windows Xp SP3.can some a guide miss me on this

  IOmega screenplay reader Dx-1 TB hard disk HD media detects not in Windows Xp with Sp3.

  On the group network appliance is seen with the IP address.
  need USB mass storage device driver USBSTOR.inf_bb2778a0.
  can anyone guide me on this driver download?

  XP should come with the standard drivers for mass storage devices.
  One of the best sites I've seen for USB problems is the following:

  "Troubleshooting for USB Drives.
    <>http://www.Uwe-Sieber.de/usbtrouble_e.html >

  I think that your problem is covered by the paragraph about 1/2 at the bottom of the page titled «Asking XP drivers»

  HTH,
  JW

• Seagate GoFlex Desk USB 3.0 External Hard Drive is not detected at startup, when you use USB 3.0

  Hey there, I was wondering if someone can help with this. Basically, my works fine external HDD so I boot to windows and then plug it into a USB 3.0, but if I leave it plugged in as I would like and reboot or shutdown and return to the reader don't launch and Windows does not detect it correctly.

  I am on Windows 7 64 bit, have an i5 - 3570 k and a sabertooth z77 mobo. USB drivers are updated, the intel one controller as the asmedia one, the bios is up-to-date, near as I can tell everything is up-to-date, but this hard just don't have it. It doesn't matter what USB 3.0 port it is plugged into you just cannot get starter. You can feed the cycle only and that will do the trick, but I don't want to do every day. If plug you it into a USB 2.0 port, so that it works exactly as it should here is my solution.

  Now, I tried to contact Seagate and they suggested that I update my drivers, even if I told them that I had updated my drivers, which was great. Clearly, they have nothing useful to say. Anyone got any ideas?

  Hello

  Thank you for the update.

  This can give it a try and check.

  Drive not detected - helpful links

  I hope this helps. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• Satellite L955-100 - HARD drive crash / no recovery disk

  Hi all

  I think I have a huge problem, so I would like your advice.
  Yesterday, my HARD drive crashed and a noise 'click of death '.

  My warranty has already expired, and of course I did not the recovery discs...

  I know that it was stupid to forget something, but even if I would like to ask you if you have another solution to my problem.

  Already, I thought about buying a new HARD drive, but then my problem is still not having access to my Windows 8 (which was on the recovery partition).

  Thanks in advance,

  Michel

  In my opinion, you should simply replace the HARD drive and need to use the recovery disk that you could order at Arvato Services
  The disc isn't expensive; round about 30

  Maybe you want to increase the performance of the computer laptop buying an SSD?
  The SSD is a bit more expensive that a common SATA HDD, but believe me: it will significantly increase the performance of the laptop

• Qosmio G20 - new HARD drive is not detected

  Hello.

  While the installation of new disks in the RAID configured laptop; one of the active disks, the second - has failed.
  Switch the mode RAID array does not. What could be the problem?

  2 X HARD DRIVE 160 GB

  The problem may be the information of RAID, and it is obviously absent on the second HARD drive. I'm not an expert on such things, but if possible I recommend you back up all your important data from the first HARD drive and install the OS by using supplied recovery media.

  After having done that, you should be able to use two hard drives with no problems.