Satellite Satellite U400-22N - which averaged 22N?

Similar Questions

• Satellite U400-22n and Win7 - screen freezes after 5 min

  Hi, this is my first post

  I ve bought a new U400 with preinstalled Vista last week. 2 days ago I ve upgraded to windows 7 32 bit professional when I looked at install windows prompted me that it requires a full install, so I did install a normal full, windows 7 installed normally.

  Now my screen freezes after 5 min and windows go black s and restarts after 3-5 min, I ve downloaded all the drivers from the Toshiba site I ve used the auto detect and installed the drivers one by one and tested if restarting stop s, I reinstalled windows now 4 - 5 times returned my copy to the store and got a new copy of windows DVD , it s the same.

  A Please someone any advice for me. Like the store I ve this perch will not upgrade to windows 7 for me.

  Hi mate

  The U400-22n seems to belong to the series of PSU44E.
  There is a special BIOS for Win 7 32 bit 4.80 - WIN32.

  Please update it all first!

  In addition, the unit supports the Chipset Mobile Intel GL40 Express and graphics card.
  The latest graphics card driver can be downloaded from the Intel page

  To do this and test it

• Satellite U400-22n - how to change the button mute for Led lighting

  Hello

  I can't turn off lighting on shortcut keys. The shortcut key to disable the LED has decided to change himself to put on mute. Does anyone know how I can pass this mute button to turn off the lights, or simply how can I turn off?

  Thanks in advance,

  Andy

  Hello

  If you are using Vista, then you should have installed VAP (value added package).
  In Toshiba Assist-> optimize you will find the configuration of buttons of Toshiba utility.
  This utility allows you to configure the buttons again.

  You must choose your button and should point to the dimmer.exe file that is located in the folder C:\Program Files\Toshiba\TBS

  Assign the dimmer.exe to the light button and complete the configuration. This should help.

• Cannot update Bios for Satellite U400 - 134 Vista 64-bit

  When I try to update Bios 3.50 courses it is said that I couldn't have an administrator rights, but I run it under administarator.

  Who knows about this problem?

  Post edited by: Gerus

  Hello!

  Satellite U400 BIOS 2.0.17.64?
  As far as I know the latest version of the BIOS for Satellite U400-134, which belongs to the PSU40E series is the version 3.50.
  Check again on the Toshiba site: http://eu.computers.toshiba-europe.com

  If you download the zip file, you should extract all files before you start the update.

  Good bye

• Satellite U400-217 - does not of media control buttons

  Hey all,.

  I have a Toshiba Satellite U400-217, which is one year old.

  For some reason any lately the light on the media controls button doesn't seem to work - where he usually lit up the touchpad line and writing of Satellite. Other media control buttons seem to work well. If I hit the light button, it turns on for a second to tell me his touchdown then disappears and nothing happens.
  What could be the problem?

  I have searched several sites looking for a response, but can't seem to find it, I even looked for the driver, but could not find this not even on the Toshiba site - I have no idea of what is still called the driver. I also tried turning the phone off, remove the battery, put the battery back in and connect to the charger. With no luck. Help would be very appreciated: I hope someone can give me information to operate! Thank you in advance,

  Julie

  Hello

  > Hey well thanks for all the answers, they came flooding in lol.
  This forum is a user to s. That means you don t have a guarantee that you will get a response within a few hours. You must wait and you need a bit of luck ;)

  In any case, I I'm happy to hear that you could solve your problem, but to be honest, the forum already contains 100 threads on this problem and the solution is always reinstall package of added value.

  Good day! :)

• Toshiba Satellite U400-14Z upgrade to a faster processor - which is the most rapid possible?

  Hello.

  I want to upgrade an old Toshiba Satellite U400-14Z (http://www.toshiba.eu/discontinued-p...lite-u400-14z/) a little by changing the CPU. Initially there is a processor Intel Core 2 Duo P8400 with FSB to 1066 MHz but I thought to put there P9700 or P9500. It seems that they are similar, specification is exactly, except the speed and the amount of memory cache level 2. The question is: would this work?
  I also found CPU called T9900, which is the fastest of the family. However, T-line requires more power than the line P, 25W to 35W in comparison. Is it possible that she would work in this phone?
  Maybe there's even some CPU more Rapids that would fit. Y at - it all? I'm looking for the maximum possible speed.
  Thank you for the answers.

  Concerning
  Lucas

  Posted by fel81
  

  Hello.

  Maybe there's even some CPU more Rapids that would fit. Y at - it all? I'm looking for the maximum possible speed.

  I found Intel® Core 2 Extreme Processor QX9300 who might be compatible. It has 4 cores and a thermal power of 45W design, compared to P8400 of TDP 25W. I suspect that the cooling of this laptop is insufficient to be able to disperse the money.

• Satellite U400 chess backlit

  The backlight on my Satellite U400 guard failed. If I close the lid and open again once it comes back for a few seconds and then fails again UNLESS the power cord is out and the laptop running on battery power at which case it acts normally.

  I changed the inverter. Any other ideas?

  > UNLESS power cord is out and the laptop running on battery power, in which case it is normally.

  Did you check if the key Fn + F6 and Fn F7 combination would increase and the brightness of the screen?

  Please check if the brightness of the screen can be changed using these buttons then the FL inverter should be ok and the problem could be linked to the Win7 power management setting.

  If the problem is related to power management settings, then I would recommend this change.

  * Go to control panel-> power-> Settings Options * change Plan

  Here you can adjust the brightness of plan
  You can set this separately for the use of the battery or AC mode

• Screen starts flashing on Satellite U400

  (Satellite U400 laptop purchased in June 2009)

  Today the screen started to Flash, I unplugged it and it stopped, and it worked when I plugged it in.
  I checked the refresh rate of the screen and it is to 60 Hertz

  Is there an underlying problem?
  He is currently, I should check anyway get?

  Just a question; Do you mean the external monitor?

  > I unplugged and it stopped, and it worked when I plugged it in.
  Do you mean that you have disconnected from the laptop AC adapter?

  This sounds like the problem known to me
  I read many similar discussions in various forums
  Generally, this is question of ground loop which can cause a blink that you can solve the problem by using an adapter 2-pin

• Satellite U400 - problem with the new extension to 2 GB RAM

  Hello

  My satellite U400 have 3 GB of DDR2 memory. (2 GB DDR Kingston PC5300 + 1 go)
  I tried to put 4 GB of RAM (2 x 2 GB DDR2 PC5300 Kingston).
  But I have the blue screen on startup of windows.

  Each extension RAM works very well (try with 2 GB of RAM only).

  Windows 7-64 bit / CRUCIAL M4 256 GB HARD drive.

  Do you have any solutions?

  Thank you.

  Can you please post exact model laptop (U400-xxx)?
  I just want to which Kingston modules are 100% compatible with your laptop satellite.

  I can only imagine that you are using incompatible Ram. All compatible modules will be recognized correctly and you will be able to boot your laptop as usual.

• Satellite U400-135 overheating

  Hello

  A few weeks back I bought the new Toshiba Satellite U400-138 and now I feel it is a lower design due to numerous complains that I found one here in the forum support or by people who have tried to deal with this series.

  Fist of all the overheating problem becomes not affordable as I'm about to lose my fingers due to the extreme heat comes from the lower level of touch pad! In addition it usually takes more than 7 minutes to get the login screen of windows while beginning to the top of the window and when you access the window continues to display the CPU usage almost 100% long just by clicking the internet explorer, so I can't do anything except wait (it's killing slow) and when I compare with my old P4 desktop , according to me, how I was wrong when I decided to go to the U-400!

  Today I've decided to take the laptop to the Toshiba dealer and when I was there, I tried to touch the lower part of the availbel for similar in the showroom model and it was very hot and when I asked the sales man there he informed me that there are many customers reported the same complain so I referred me to their service center for inspection and I'm so annoying now because my new laptop will be served after only two weeks and I think that this model is a design of lower quality and the only way to get rid of this problem to get the same replaced by something else?

  your valuable comments is highly apprciated.

  Salvation will be

  I have a U400 too. It s a U400 which belongs to the series of PSU40E.
  I use two BONES; Vista and XP.

  Initially the Vista started slowly, it was not too slow but slower than Win XP.

  I studied a bit and found a solution;
  First of all, I discovered that many background processes and apps have loaded early in the boot process in MSCONFIG, you can find these applications.

  I disabled some unnecessary programs (for me) and the notebook starts up much faster.

  Moreover, I noticed that Tempro update tool helped me a lot.

  So please check these two proposals.
  I don't know that it could help you...

  Regarding the temperature more high touchpad;
  Well, my touchpad is also hotter than the rest of the cover of the laptop but is nothing unusual because cooling modules are placed under the touchpad and the left side is warmer due to the dissipation of the heat of this side of the laptop

  If you shouldn't be worried; It is not unusual

  Bye & have a nice day

• Command buttons and lights not working not properly - Satellite U400

  I am currently facing a problem with my Satellite U400, which runs under Windows Vista / Bios v3.00.
  First, the control buttons no longer work, as when I press on them, nothing more. It was that when you press on, the LED lights for a while and then come back to life.

  Now, LEDS are constantly lit. Even when the laptop is turned off and the cable is removed.

  So far, I tried to turn on and turn off the LED option in the Bios (that is turned on and off the LED on the touchpad and the logo of Satellite, but not on the control buttons). I uninstalled and reinstalled the Value Pack from recovery CD - no change. I deleted and reinstalled the Windows called devices: ACPI fixed feature button (thought this might help).

  Is there anything else I could do?

  Once the problem is resolved, I wonder if the command buttons can be customized. For some reason I do not seem to find the appropriate program to set those.

  Thanks for any input.

  Hello

  Someone suggested this work around:
  You must install the utility to control on the one hand, and where to install the value Pack, choose Advanced Options and uncheck the Support Button TOSHIBA.

  Welcome them

• New Satellite U400 cannot use the Wlan in Vista

  This is my first post! I just bought a whole new race of Toshiba Satellite U400 Vista Home Premium and I cannot get the wifi to work with my router (which works very well with a Toshiba Quosmio, philips, Nokia N85 phone and iPod laptop).

  He sometimes worked but is virtually unusable.

  I get access: Local only and whateverf as I do, I can't work properly.
  I use encryption WEP 128 bit on a router/modem US Robotics 9106.

  Any help gratefully otherwise received I will take this back to the shop because it is not a usable product.

  Thank you

  I have

  Hello

  I recommend you do the BIOS update. Here you can compare the current version on your laptop, latest on the Toshiba download page.
  Compare also the WLAN driver version.

  After BIOS update the WLAN test new functionality. In a first time without any form of encryption.
  Please post the results.

• Satellite U400 - cannot find HARD drive recovery option

  I'm doing a full recovery from the computer by using the HARD drive recovery procedure, but the problem that I can not find the entrance (to fix your computer) when I press F8 after you restart the computer.

  My laptop is: Toshiba Satellite U400-144
  Model: PSU40E - 03P00WAR

  Kindly advice what to do.

  Hello

  Normally, you can start the drive HARD recovery function if you press the F8 key to go into the advanced boot menu. After that, select Repair my computer and in the next window, you can choose the option of Toshiba HARD drive recovery.

  By the way: which OS you have installed right now? HARD drive recovery is possible on a preinstalled OS to Toshiba!

• Re: Can I use the other Satellite U400 series recovery disk

  I have Toshiba Satellite U400 121. My recovery disk does not work may be due the scratches that I see in it. I took the laptop to the Toshiba Center service and I got a negative support of them. They said, they can't put the Windows Vista because the recovery disk is not there, and they have put Windows XP inside and handed to me.
  later I got to know that Windows Xp is not Geninue one. :|

  I can still see one of the Partition 'D:' with folder HDDRecovery inside.

  So can I use Recovery Disk of all PC model Toshiba laptop other than the Toshiba Satellite U400 121 recovery disk.

  In fact, I tried with the other model recovery disk, that at boot with this disk, Recovery Wizard starts up, but since I'm not sure about this one I stopped there and brought out.

  Please one of you let me know if you have valuable contributions on this.

  suggestions are welcome!

  Thanks in advance.
  wassim :)

  Post edited by: Mikael

  Hello

  I don't know Mr. which series Satellite U400-121, it is, but you must use the recovery disc designed specifically for this series of laptop!

  Another recovery disc cannot be used because the drivers and tools that have been implemented in the image of Toshiba are not designed for this series of laptop!

  By the way; You can order the CD from recovery from here:
  https://backupmedia.Toshiba.EU/landing.aspx

  Good bye

• Satellite U400-119 integrated webcam malfunction

  Hello everyone, hope you can help me with this problem.

  I have a * Toshiba Satellite U400-119 * with built-in webcam which worked GREAT until one day she decided to give me a black screen everytime I turned on it. It's all quite normal, but instead of me show ME on cam window when I'm in front of it, it is all black. However, when I take a snapshot with the camera it gives me a picture with me on this subject with all the background as it works perfectly well. However, in mode Webcam live he keeps gives me a black screen.

  I don't think that there is nothing wrong with the lens if not that the instant test not would not have worked. I should also mention that I tried to record a video with her and it is for me the noise but the screen remains black too...

  Put except that I tried to update the version of webcam, but it seems that I already have the latest version (UVC 1.7.175.0123).

  I'm not very computer literate, but I'd appreciate it if you could try and help with simple terms ;)

  Thank you for your time.

  L

  Hello

  You should try to reinstall a driver of the webcam:

  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

  But uninstall the previous one installed and reboot the laptop. Then install a downloaded