Satellite T110-11U - error message when starting computer

Similar Questions

• Receive the error message when starting computer - "problem event name: CLR20r3.

  Original title: this error continues to appear whenever I turn on the computer is a quick solution to this error.please help___

  Description:

  Stopped working

  Signature of the problem:

  Problem event name: CLR20r3

  Signature of the problem 01: wmconduitdirector.exe

  Signature of the problem 02: 3.3.29.0

  Signature of the problem 03: 4bf1f8c4

  Signature of the problem 04: OpenNETCF.Desktop.Communication

  Signature of the problem 05: 2.9.3299.25810

  Signature of the 06 problem: 496b97f5

  Signature of the problem 07: e4

  Signature of the 08:0 problem

  Signature of the problem 09: System.NullReferenceException

  The system version: 6.0.6002.2.2.0.768.3

  Locale ID: 1033

  Read our privacy statement:

   

   

  Hi BANGER67,

  CLR20r3 is associated with the .net framework. I suggest you try the following steps:

  Step 1: Clean boot the computer, and check to see if the problem persists

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not the computer to start normal follow step 7 in the link.

  Step 2: Remove and reinstall the .NET Framework (see method 3 in the link below)

  Type of event: clr20r3
  http://support.Microsoft.com/kb/953486

  See also the steps mentioned in the article (method 1)

  Manually remove and reinstall .NET Framework

  http://support.Microsoft.com/kb/923100

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Rundll error message when starting computer c/windows/system32/larcheya.dll__The specified module could not be found. __

  I need this program?  If Yes, what should I do to install it?  If not, how can I get rid of him?

  A Google search for "larcheya.dll" grew nothing. When you get no hits for a filename on Google, chances are high that it is a malicious program file. Either you have uninstalled the malware program or your antivirus/antispyware program did. In all cases, a reference has been left in the boot file. You can remove the reference by managing your startup.

  Because you had a piece of malware, the chances are too high you had others. It would be a good idea to scan. I recommend to download and install MalwareBytes' anti-malware (MBAM) from http://www.malwarebytes.org . The program is free. (There is a paid version, but you don't need to buy it to remove the malware).

  Manage startup:

  (for XP) Start > run > msconfig [Enter]

  This will open the System Configuration utility. Look under the Startup tab and find the likely culprit. Uncheck the box next to its name, apply and OK out. You don't need to restart immediately, but next time you do, you will get a dialog box saying that you have used the utility. Just check the box that says in effect, "don't mind to this subject again".

  How to troubleshoot by using the Msconfig in Windows XP utility - http://support.microsoft.com/?id=310560

  The free Autoruns program is very useful for managing your Startup - http://www.microsoft.com/technet/sysinternals/default.mspx MS - MVP - Elephant Boy computers - Don ' t Panic!

• I get an error message when the computer starts, "failed to prepare the critical file! Engine out of Chameleon.

  I have a laptop Asus N53Jq, 16 GB, 224 GB ssd, I get an error message when the computer starts, "failed to prepare the critical file! Engine out of Chameleon"when I click the computer works fine, but it seems that she was taking more resources without doing me anything. Do know how to solve this problem.

  Original title: Chameleon engine

  I uninstalled ASUS Splendid Video Enhancement Technology to my computer and it solved the problem!

• Satellite Pro L - error message when I try to play a music CD

  When I try to play a music CD I get this error message >

  + "The version of this file is not comparable with the version of Windows you are using. Check +.
  + system information from your computer to see if you need a x 86 (32 bit) or x 64 (64 bit) +.
  (+ version of the program and then contact the software publisher.) » +

  He plays on my old XP 32 bit office but will not play on computer laptop 64 bit Windows 7.
  The CD is not a commercial manufacturing, but it is important for me.

  Any ideas please?

  Pete

  Hey,.

  Try your hand at playing the CD with Windows Media Player or player exactly?

  You can try to play with VLC media player. It s my favorite player because he plays all audio and video files and it s freeware :)

• 10: Help, error message when starting the

  Hey guys,.

  I have a toshiba with windows XP Home Edition a10.
  whenever I try to start the computer, I get an error that reads:

  A disk read error occurred
  Press Ctrl + Alt + Delete to restart

  No matter what I do, I can't go in front of her. Ive had this error before and I solved it by pressing f12 at startup and selecting the option farthest away (to the right of the network)

  now im just stuck, if there is a way I can get past without having to reformat my hard drive, it would be great because I have a lot of useful stuff out there.

  Thank you very much

  Jordan

  Hello

  Sounds strange! As a first step, you should try to back up your data with a floppy Boot or Boot CD (www.bootdisk.info).

  Then you should try to sett your BIOS back to default settings.
  Next step is to try to find your laptop! If there is an error message that your HARD drive is damaged!

  Go to https://eu.computers.toshiba-europe.com - Support & downloads - find an authorized Service partner!

  Goodbye Chris

• Receive error message when starting Photoshop CS3

  I get the following when starting CS3 error message:

  "This application has failed to start because CML4.dll was not found."

  The title of the window is, "Photoshop.exe - impossible to locate item.

  Of course, the only button to push is the 'OK' button (which should probably read - something f - d upwards.) Press here to continue.) After pressing the OK button, CS3 starts and works without problem - until now.  I guess that I have not actually used the part of the program that uses CML4.dll or do not see the difference with or without it.

  How can I solve this problem - without having to reinstall PSCS3? and why is it in the first place?

  CML4.dll is not part of Photoshop.

  It could be a driver of printer or scanner driver DLL, or perhaps by a third party plugin.

• Re: Satellite A300-211 - error message when installation of VAP

  Hi, I just did a clean install of Vista Ultimate (R) x 32 on my A300-211 and when I get to the installation of VAP this well known error message appears. I have not found an elegant solution to this subject. Any thoughts on fixing it? (clean install, x 86, VAP 1.1.19 x 32 etc.)

  My best regards and thanks in advance. I found several solutions here in the past, you are doing a great job.
  Aggelos

  Thanks for the comments, buddy!

  It is perhaps useful to other users here s. :)

• Error message when starting. C:\WINDOWS\system32\gijsgkuj.DLL specified module could not be found.

  This error message has appeared for some time now, but it does not seem to harm my pc, other than very slowly.  What is the feature of this module?  Do I need for normal use?

  johnedr1,
  You can check that you spelled the file correctly?  I wasn't able to find that everything about this DLL.  If you have any specialized software it can be part of that.  But something during startup tries to call this file and find do not.
  You can make troubleshooting by performing a clean boot.  Here are the links that will explain the process in detail.  Short of this, you disable the elements of all Microsoft and if the error Stops, then add points back until you find the program\process which is the cause.

  Follow the steps in this article to resolve problems with a clean boot.

  http://support.Microsoft.com/kb/310353

  Boot advanced troubleshooting: http://support.microsoft.com/kb/316434

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error message when starting the computer in normal mode: btdna.exe

  I get this error during start-up:

  WSA startup failed or if you have the wrong version of the installed Winsock.

  I tried the command prompt, run as an administrator and reset but it not taken care of the problem.  Help, please!

  Hi Amy Shane,.

  Welcome to the Windows Vista answers Forum!

  You can check the following link and analysis online on your computer to verify if your computer is infected with a virus.

  http://OneCare.live.com/site/en-us/default.html

  Step 2: Manually remove BitTorrent from the PC

  1 open the Task Manager by pressing the Ctrl + Alt + Del or Ctrl + Shift + Esc key combination.

  2. go to the processtab.

  3. search btdna.exe and right-click on it.

  4. Select end process.

  5. click Yes when the warning sign is displayed.

  6. close Task Manager.

  7 Click Start then start search

  8. enter C:\Program Files\DNA\btdna.exe / UNINSTALL.

  9. use the search function for all other instances of btdna and also remove them.

  If you are prompted to restart the computer, then restart and reinstall the btdna.exe.

  Hope this information is useful.

  Jeremy K

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Satellite Pro A300-guest 1GT - error message when starting webcam

  I have a Toshiba Satellite Pro A300-guest 1GT. The problem is that the camera does not work. When I run the software, he writes that I have to restart camera or computer. I have Windows 7 and I have serched internet solutions but I find just a discusions with the same problem without solutions.

  Sory for bad English may.

  Hello

  Have you tried reinstalling the driver for the webcam? You can download it from the official website of Toshiba:
  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

  Before installation: remove the driver current webcam and restart your computer. Try a registry cleaner like Ccleaner, then stop and try again. Now, you can install the latest driver for the webcam.

  I hope it works! :)

• Error message when starting series Satellite P - 'output-ROM PXE.

  Ago, I accidentally deleted the active partition on my hard drive. Oops. It is not very pleasant, because even if I wanted to wipe the drive and start over, the laptop would not recognize a hard drive more. I live in the British Virgin Islands where we have lots of rum and sand but no part of the computer! So I bought a new hard drive, and it has not solved the problem. It turns out that the car was not good. Bad luck. I was recently in California (many computer parts), and some tech people confirmed the disc was bad and yet another reader has been implemented. Unfortunately people out there have no time to repair the laptop before I leave. Now, I'm fairly certain that the hard drive is good.

  So now I have a good record, but whenever I try to start, I'm stuck on the following message is displayed:

  Intel UNDI, PXE - 2.0 (build 082)
  Copyright (C) 1997-2000 Intel Corporation

  For Realtek RTL8139 (X) / 8130/810 PCI fast ethernet controller v2.13 (020326)
  PXE - E61: Media test failure, check cable of
  PXE - MOF: Exit PXE ROM.

  Any boot sequence I use (I can get to the installation), I can't get the computer to boot to a CD. I even tried to put a version of Ubuntu on a USB key to start to that. Nothing, whenever I get the same message.

  If I remove the hard drive, I get the same message, but it repeats itself every few seconds. With the HD what happens only once.

  What should I do now?

  The PXE ROM message appears because the laptop is trying to boot from LAN.
  We can imagine why the laptop want boot from LAN.
  Other devices like disk HARD and CD/DVD drive don't function properly, controllers are not recognized by the BIOS or there is a startup order simply false.

  If you want to boot from the ODD or HARD drive you can press F12 immediately after start of laptop and the start menu should appear. Then, you could choose the right boot device.

  Anyway, if it s not able to choose such device you need to access the BIOS and should set the BIOS default settings and save these settings!

  Good luck

• Satellite P300-1CN - error message when download of MSN messenger

  I recently updated my Satellite P300 - 1CN PSPCCE to Windows 7, after this everything seems to work ok but if I try to download msn messenger is comes up with an error saying the file may be corrupted hr: 0x8007000d.

  I am not the most technical of the world, but would like to know what I need to do on this issue!

  Help please!

  Hi Brian,.

  I think that it of really difficult to tell why you get an error when you download MSN messenger.
  Where do you download the Messenger? You should try MSN or Microsoft page.

  This will happen if you click on download or start the downloaded file?

  Have you noticed this behavior with other downloads too?

• Receive an error message when starting

  Original title: Evert time I turn my laptop on, I get a screen notpad msg: CmdVBS

  Whenever I turn on my laptop I get a msg notpad CmdVBS:Set WshShell = CreateObject ("WScript.Shell")
  Chr (34) WshShell.Run & "C:\Program Files\Verizon\IHA_MessageCenter\bin\Restart.bat" & Chr (34), 0
  Set WshShell = Nothing

  How to stop this?
  Thank you

  Hello

  1. what operating system is installed on the computer?

  2. were there any changes (hardware or software) to the computer before the show?

  Put the computer to boot and check if that helps.

  To help resolve the error and other messages, you can start Windows XP, Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Note: follow step 7 to reset the computer to start as usual after the boot process.

  How to configure Windows XP to start in a "clean boot" State

  Note: follow step 4 to reset the computer to start as usual after the boot process.

  Hope this information helps.

• "C:\Program Data\Dpis_isv64.dll specified Module is not found" error message when starting

  Original title: problem starting C:\Program Data\Dpis_isv64.dll Module specified is not found

  This happens at the office during the start-up of the pc...

  Hello

  Were there any changes (hardware or software) to the computer before the show?

  Put the computer to boot and see if it helps.

  To help resolve the error and other messages, you can start Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  Note: follow step 7 to reset the computer to start as usual after the boot process.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Hope this information helps.